Walker 42 Inch Users Manual

!! Walker-7 Walker Lawn Mower Manuals - Lawn Mower Manuals – The Best Lawn Mower Manuals Collection

48-inch to the manual dc48437f-cd7e-c794-1566-e72589539213

2015-02-03

: Walker Walker-42-Inch-Users-Manual-476298 walker-42-inch-users-manual-476298 walker pdf

Open the PDF directly: View PDF PDF.
Page Count: 56

Deck and Carrier Frame Assemblies (36”, 42”, 48”, 52”, 56”, 62” & 74”)
Effective Date: P/N 5000-17
07-01-06
ILLUSTRATED
PARTS MANUAL
Use only genuine Walker® replacement parts. Effective Date 07-01-06
KEY TO ABBREVIATIONS USED IN THIS MANUAL
º (Dimension) .................................................................................................................................... Degrees (Angle)
" (Dimension) ....................................................................................................................................................inches
(-) ...................................................................................................................................................Negative (Polarity)
(+).................................................................................................................................................... Positive (Polarity)
AT................................................................................................................................................................ All-Terrain
CCW .............................................................................................................................................. Counter-clockwise
Conn. ..........................................................................................................................................................Connector
CW .............................................................................................................................................................. Clockwise
D ...................................................................................................................................................................Diameter
DGHS......................................................................Deck, Grass Handling System (number refers to size in inches)
DML ............................................................................................... Deck, Mulching (number refers to size in inches)
DSD ..................................................................................... Deck, Side Discharge (number refers to size in inches)
DU................................................................................................................................................... Garlock (Bearing)
ESNA (Fastener).........................................................................................................................Nylon Insert Locknut
FSC........................................................................................................................................ Forward Speed Control
GA.....................................................................................................................................................................Gauge
gal. .....................................................................................................................................................................gallon
GHS .......................................................................................................................................Grass Handling System
GR (Fastener) ................................................................................................................................................... Grade
HP ...........................................................................................................................................................Horse Power
HT .......................................................................................................................................................... Heat-Treated
ID ..............................................................................................................................Identification or Inside Diameter
L ....................................................................................................................................................................... Length
LH ..........................................................................................................Left Hand (orientated with operator on seat)
LP...............................................................................................................................................................Low Profile
mm (Dimension)......................................................................................................................................... millimeters
MS (Fastener) .....................................................................................................................................Machine Screw
NS (as part number)................................................................................... Item is not sold by Walker Manufacturing
OD................................................................................................................................................... Outside Diameter
oz. ......................................................................................................................................................................ounce
PFH (Fastener) ............................................................................................................................... Phillips Flat Head
P/N ..........................................................................................................................................................Part Number
PPH (Fastener) ...............................................................................................................................Phillips Pan Head
PTH (Fastener) .............................................................................................................................Phillips Truss Head
PTO.....................................................................................................................................................Power Take-Off
QKS .......................................................................................................................................................... Quick Slide
qt. ........................................................................................................................................................................ quart
RH....................................................................................................... Right Hand (orientated with operator on seat)
SAE (Fastener) ....................................................................................................... Society of Automotive Engineers
SBH (Fastener) ..................................................................................................................Socket Button Head (Bolt)
SD .......................................................................................................................................................Side Discharge
SFH (Fastener) ................................................................................................................................Slotted Flat Head
SHC (Fastener)............................................................................................................................... Socket Head Cap
SHL (Fastener) ................................................................................................................................... Shoulder (Bolt)
SM (Fastener) .............................................................................................................................Sheet Metal (Screw)
S/N ....................................................................................................................................................... Serial Number
Spg.................................................................................................................................................................... Spring
SQH (Fastener)...................................................................................................................................... Square Head
SS (Fastener).......................................................................................................................................Stainless Steel
ST (Fastener).............................................................................................................................Self-Tapping (Screw)
Term. ..............................................................................................................................................................Terminal
V...........................................................................................................................................................................Volts
NOTE: In some instances, combinations of abbreviations may be used (e.g. PPHMS - Phillips Pan Head Machine Screw).
Abbreviation What it Represents
1
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
Decals & Paint
Deck Decals / Touch-Up Paint ................................ 2
Deck and Carrier Frame Assemblies
36 Inch Complete Carrier Frame Assembly ............ 4
DGHS36 Deck Assembly ........................................ 6
DSD36 Deck Assembly ........................................... 8
42 Inch Complete Carrier Frame Assembly .......... 10
DGHS42 Deck Assembly ...................................... 12
DSD42 Deck Assembly ......................................... 14
DML42A Deck Assembly ...................................... 16
48 Inch Complete Carrier Frame Assembly .......... 18
DGHS48 Deck Assembly ...................................... 20
DSD48 Deck Assembly ......................................... 22
52 Inch Complete Carrier Frame Assembly .......... 24
DSD52 Deck Assembly ......................................... 26
Mulching Kit (For DSD52 Deck Assembly) ........... 28
56 Inch Complete Carrier Frame Assembly .......... 30
DSD56 Deck Assembly ......................................... 32
62 Inch Complete Carrier Frame Assembly .......... 34
DSD62 Deck Assembly ......................................... 36
74 Inch Complete Carrier Frame Assembly .......... 38
DSD74 Deck Assembly ......................................... 40
Maintenance
Optional Break-Away Blades ................................ 42
Blade Usage Chart ................................................ 43
Deck Weldment Replacement Parts ..................... 44
Deck Height Adjuster Kit ....................................... 46
Lubrication Points ................................................. 48
Fastener Loctite® Application &
Torque Instructions ......................................... 50
Maintenance And Service Record Sheet .............. 52
Deck / Tractor Compatibility Chart ........................ 52
Warranty
Limited Warranty ................................................... 53
ILLUSTRATED PARTS LIST
Section of Mower Covered Page Section of Mower Covered Page
2
I T EM P AR T D E SC R I P TI O N L O CAT IO N NO . N O .
NO. NO. REQ’D. GHS REQ’D SD
Use only genuine Walker® replacement parts. Effective Date 07-01-06
DECK DECALS / TOUCH-UP PAINT
DSD52 And DSD62 Deck Decals
1 8653 Caution, Pivot Joint Carrier Frame 0 2
2 8748 Cutting Height Adjustment Footrest Pulley Guard 0 1
3 8746 Universal Joint Lube Mount Bracket/PTO Guard 0 1
4 5846 Grease Fitting Deck Cover Plate 0 3
5 5808-1 Danger, Rotating Blades Cover Plate (one on each end) 0 2
6 8647 Danger, Tilt-Up Carrier Frame 0 1
7 8653-1 Transport Warning Deck Housing, Front 0 1
8 8732 Decal (52") Deck Housing, Front 0 1
9 5809 Walker Mower Logo (3") Carrier Frame, Front 0 1
10 8734 Drive Belt Routing Underneath Deck Cover Plate 0 1
11 5848 Danger, Side Discharge Shield Side Discharge Shield 0 1
12 5808 Danger, Rotating Blades (62" Deck) Deck Housing (one on each end) 0 2
13 8750 Decal (62") Deck Housing, Front 0 1
14 8749 Drive Belt Routing Underneath Deck Cover Plate 0 1
15 8746-1 Decal, Tele PTO Shaft U-Joint Shaft Assembly 0 1
36", 42", 48" & 56" Deck Decals
1 8653 Caution, Pivot Joint Carrier Frame 2 2
4 5846 Grease Fitting Deck Cover Plate 1 1
6 8647 Danger, Tilt-Up Carrier Frame 1 1
7 8653-1 Transport Warning Deck Housing, Front 0 1
9 5809 Walker Mower Logo (3") Carrier Frame, Front 1 1
11 5848 Danger, Side Discharge Shield Side Discharge Shield 0 1
12 5808 Danger, Rotating Blades Deck Housing (one on each end) 2 2
16 6875 PTO Alignment Arrow Universal Joint Shaft Assembly 1 1
17 5807-3 Cutting Height Adjustment Gearbox Cover 1 1
18 5865 Blade Mounting Torque Carrier Frame 1 1
19 6789 Decal (56") Deck Housing, Front 0 1
DSD74 Deck Decals
1 8653 Caution, Pivot Joint Carrier Frame 0 2
5 5808-1 Danger, Rotating Blades Deck Housing (one on each end) 0 2
6 8647 Danger, Tilt-Up Carrier Frame 0 1
7 8653-1 Transport Warning Deck Housing, Front 0 1
9 5809 Walker Mower Logo (3") Carrier Frame, Front 0 1
11 5848 Danger, Side Discharge Shield Side Discharge Shield 0 1
16 6875 PTO Alignment Arrow Universal Joint Shaft Assembly 0 1
17 5807-3 Cutting Height Adjustment Middle Gearbox Cover 0 1
18 5865 Blade Mounting Torque Carrier Frame 0 1
20 7689 Decal (74") Deck Housing, Front 0 1
Touch-Up Paint
21 5866 Touch-Up Paint, Yellow (12 oz. Aerosol)
NOTE: All parts requiring decals are shipped with decals applied.
3
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
DECK DECALS / TOUCH-UP PAINT
E
VERY
GREASE
H
RS.
5846
25
E
VERY
GREASE
H
RS.
5846
25
E
VERY
GREASE
H
RS.
5846
25
E
VERY
GREASE
H
RS.
5846
25
E
VERY
GREASE
H
RS.
5846
25
18
18
12
9
17
12
16
11 18
9
17
12
16
12
Deck Assemblies
DSD52 & DSD62
Deck Assemblies
DSD48 & DSD56
DSD36, DSD42,
Deck Assemblies
DML42A & DGHS48
DGHS36, DGHS42,
6
6
1
1
1
21
1
1
4
9
10,14
315
5,12
4
4
11
11
8,13
5,12
5
5
7
7
7
19
DSD74
Deck Assembly
6
2
17
16
9
4
6
20
1
1
14
4
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
36 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 5710-4)
Spring and Pivot Mount Components
1 5975-3 Cable Tie (50# x 7") 4
2 5744-1 Spring Clip Bracket 1
3 5743-1 Spring Cover 2
4 8667-10 Pivot Mount, LH/Adj. 1
5 5830-3 Grease Fitting (45 Degree) 4
6 8667-20 Pivot Mount, RH/Adj. 1
7 5743-4 Eyebolt (3/8-16 x 2-3/4) 2
8 5743-6 Extension Spring (1-1/2 7-3/4) 2
(Includes Items # 1, F117 & F166)
Carrier Frame Components
9 8674-11 Lever, Deck Lock, LH 1
10 7406-1 Handle Grip (Red) 2
11 8669 Lift Handle 1
12 5748-10 Rubber Mat (1-1/2 x 6) 2
13 5740-2 Deck Pin Bushing (5/8) 4
14 5708-6 36" Carrier Frame (Less Pivots) 1
(Includes Item # 12)
5708-1 36" Carrier Frame w/Forks (Less Pivots) *
(Includes Items # 12, 21-23, 25,
F055, F068 & F098)
15 8674-10 Lever, Deck Lock, RH 1
16 5830 Grease Fitting 6
Caster Wheel Components
17 5714-7 Bearing Cap 4
18 5714-5 Bearing, Caster Wheel 2
19 5715-4 Caster Wheel, Pneumatic (8 x 3.00-4) 2
(Includes Items # 5,17 & 18)
5715-10 Tire, Pneumatic (8 x 3.00-4) *
5715-9 Tire Tube, Pneumatic (2.80/2.50-4) *
5715-3 Caster Wheel & Tire (8 x 3.00-4) **
5715-11 Tire, Caster Wheel/No-Flat (8 x 3.00-4) **
20 5714-3 Axle Spacer Tube 2
21 5770-1 Caster Wheel Fork 2
22 8768-1 Seal (1-3/4 x 1-1/8) 2
23 8037 Bearing, Cone (3/4 ID) 4
24 8769-1 Bearing Cup (1-3/4 x 1-7/16) 4
25 8769-9 Dust Cap 2
Fasteners
F012 3/8-16 Keps Nut 2
F014 3/8-16 ESNA Nut 2
F020 5/16-18 ESNA Nut 2
F047 3/8-16 x 4-1/2 Hex Bolt 2
F055 5/8 SAE Washer 2
F068 1/8 x 1 Cotter Pin 2
F084 5/16 Wave Spring Washer 2
F098 5/8-18 Slotted Hex Nut 2
F117 Retainer Ring 2
F123 1" External Snap Ring 4
F166 Retainer Ring 2
F226 5/16-18 x 7/8 Hex Bolt 2
F317 3/16 x 1 Split Spring Pin 4
F335 3/8-16 x 7/8 Set Screw, SS 2
F336 3/8-16 Jam Nut 2
*Service Part Only
** May be ordered as a factory-installed option or as a kit for
dealer installation. Contact your Walker dealer.
NOTE: When installing Item # 8 on decks prior to S/N DX-62875,
the swivel hook end should be attached to the deck carrier
frame.
5
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
36 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 5710-4)
F098
F055
F068
23
22
21
F047
17
17
19
20
518
F226
F084
F020
11
F012
F020
F084
F226
F123
16
16
12
10
13
15 F317
F317
F317
F317
10
13
2
7
6
8
4
9
5
1
3
7
F014
F335
F336
F166
F117
Refer to DGHS36
DECK ASSEMBLY, Page 6
Refer to DSD36
DECK ASSEMBLY, Page 8
14
24
24
25
23
Refer to LUBRICATION POINTS, Page 48.
6
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
DGHS36 DECK ASSEMBLY (P/N 5710-15)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619-2 PTO Shaft Guard 1
8618-3 PTO Shaft Guard Assembly *
(Includes Items # 1, 2, F002 & F025)
3 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 24, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
6 5704-40 Gearbox and Tube Assembly 1
(Includes Items # 12-19, F124, F136,
F179, F211 & F226)
5704-45 Heavy Duty Gearbox and Tube Assembly **
(Includes Items # 12-16, 18-20, F136,
F179, F211 & F226)
7 5794 Discharge Chute (6-1/2 Diameter) 1
(Includes Items # 10, 11, F223 & F224)
5794-1 Discharge Chute Assembly with *
Spring Mount
(Includes Items # 6, 7, 10, 11, F223 & F224)
8 8678 Spring Mount, Chute 1
9 8677 Extension Spring (1 x 6-1/16) 1
10 5726 Chute Hinge (2 x 8) 1
11 5755 Chute Lower Lip 1
12 6054 Spline Coupling 3
13 P007 Gasket, Cap (Peerless #788030) 4
14 5061 Gearbox Connector Tube (6-11/16) 1
15 6732-2 Connecting Shaft (4-1/8) 1
16 5052-1 Gearbox (LH Rotation) 2
5052-5 Heavy Duty Gearbox (LH Rotation) **
17 5706-4 Seal Protector Plate 3
18 5704-1 Gearbox Cover Support 2
19 5051-16 Tee Gearbox, Shear 1
5051-6 Heavy Duty Tee Gearbox, Shear **
20 5060 Gearbox Connector Tube (2-5/16) 1
21 5052-3 1.375 x .750 x .187 Washer 4
22 5747-11 Rubber Mat (3 x 6) 2
23 5746-4 36" Gearbox Cover (Includes Item # 22) 1
24 8067-13 Shear Pin w/Cotter (Set of 5) *
(Includes Item # F069)
25 5830 Grease Fitting 1
Deck Housing Components
26 8670 Tilt-Up Hook 1
27 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
28 8490 Roller Wheel Axle Bolt 2
29 5710-16 36 GHS Deck Housing 1
(Includes Items # 35 & 36)
30 NS Deck Serial Number Plate 1
31 5705-0 Blade, 20" (RH Rotation) 1
32 5705-2 Blade, 20" (LH Rotation) 1
5705-6 36 GHS Blade Set W/Hubs *
(Includes Items # 31-33, F002 & F202)
33 5706 Blade Hub & Trash Guard 2
34 7775-1 Hitch Pin, LH (Silver) #6 2
35 8735-10 Rubber Mat (5 x 6) 2
36 8788-1 Rubber Mat (1 x 2) 1
37 7775-2 Hitch Pin, RH (Gold) #6 2
38 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 9
F004 1/4-20 Keps Nut 2
F005 1/4-20 ESNA Nut 2
F013 3/8-16 Whiz Locknut 6
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F036 1/4-20 x 1/2 SBH Screw 2
F038 3/8-16 x 1 Hex Bolt 4***
F039 3/8-16 x 1-1/4 Hex Bolt 4
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 2
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw *
F087 #10 x 7/8 Fender Washer 2
F124 10-32 x 3/8 Taptite Machine Screw 9
F129 10-24 x 1/2 PTHMS 3
F136 AN960C416L Washer 16
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 16
F223 3/16 x 5/16 Semi-Tube Rivet *
F224 3/16 x 7/16 Semi-Tube Rivet *
F229 C-Clip (13/16) 2
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 4***
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
*Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchange-
able with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD and MC.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MS and MB.
7
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
DGHS36 DECK ASSEMBLY (P/N 5710-15)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
F002
F002
F005
F223
F224
F013
F059
F013
F018
F025
F029
F002
F036
F039
F050
F056
F055
F069
F076
F087
F124
F129
F136
F202
F002
F211
F229
F229
F295
4
35
25
16 24
10
11
17
16
87
9
13
13
14 13
13
12
12
12
27
27 28
15
31
33
32
29
34
36
37
32
38
19
20
22
23
21
1
2
Refer to 36 INCH
CARRIER FRAME ASSEMBLY,
Page 4
35
35
18
F136
F179
18
F246
F050
F206
30
26
F004
F403
6
Hardware Used on
Heavy Duty Gearboxes
F038
F278
21
Refer to LUBRICATION POINTS, Page 48.
8
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
DSD36 DECK ASSEMBLY (P/N 5710-17)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619-2 PTO Shaft Guard 1
8618-3 PTO Shaft Guard Assembly *
(Includes Items # 1, 2, F002 & F025)
3 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 21, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
6 5704-43 Gearbox and Tube Assembly 1
(Includes Items # 7-16, F124,
F136, F179 & F211)
5704-46 Heavy Duty Gearbox and Tube Assembly **
(Includes Items # 7, 9-16, F136,
F179 & F211)
7 5704-1 Gearbox Cover Support 2
8 5706-4 Seal Protector Plate 3
9 6054 Spline Coupling 3
10 P007 Gasket, Cap (Peerless #788030) 4
11 5061 Gearbox Connector Tube (6-11/16) 1
12 6732-2 Connecting Shaft (4-1/8) 1
13 5052-1 Gearbox (LH Rotation) 1
5052-5 Heavy Duty Gearbox (LH Rotation) **
14 5051-16 Tee Gearbox, Shear 1
5051-6 Heavy Duty Tee Gearbox, Shear **
15 5060 Gearbox Connector Tube (2-5/16) 1
16 5053-1 Gearbox (RH Rotation) 1
5053-5 Heavy Duty Gearbox (RH Rotation) **
17 5052-3 1.375 x .750 x .187 Washer 4
18 5747-11 Rubber Mat (3 x 6) 2
19 5746-4 36" Gearbox Cover 1
(Includes Item # 18)
20 5830 Grease Fitting 1
21 8067-13 Shear Pin w/Cotter (Set of 5) *
(Includes Item # F069)
Deck Housing Components
22 8670 Tilt-Up Hook 1
23 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
24 8490 Roller Wheel Axle Bolt 2
25 5710-18 36 SD Deck Housing 1
(Includes Items # 23, 24, 29 & 31)
26 NS Deck Serial Number Plate 1
27 5705-1 Blade, 20" (RH Rotation) 2
5705-5 36 SD Blade Set W/Hubs *
(Includes Items # 27, 28, F002 & F202)
28 5706 Blade Hub & Trash Guard 2
29 8735-10 Rubber Mat (5 x 6) 2
30 7775-1 Hitch Pin, LH (Silver) #6 2
31 8788-1 Rubber Mat (1 x 2) 1
32 7775-2 Hitch Pin, RH (Gold) #6 2
33 5709-2 36/42 SD Discharge Shield 1
34 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 6
F004 1/4-20 Keps Nut 2
F013 3/8-16 Whiz Locknut 6
F014 3/8-16 ESNA Nut 2
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F038 3/8-16 x 1 Hex Bolt 4***
F039 3/8-16 x 1-1/4 Hex Bolt 6
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 4
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw *
F124 10-32 x 3/8 Taptite Machine Screw 9
F136 AN960C416L Washer 20
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 16
F229 C-Clip (13/16) 2
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 4***
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
*Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchange-
able with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD, MC and MW.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MS and MB.
9
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
DSD36 DECK ASSEMBLY (P/N 5710-17)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
F013
F059
F013
F018
F025
F029
F002
F039
F050
F056
F055
F069
F076
F124
F136
F202
F002
F206
F039
F059
F014
33
26
34 F211
F229
F229
F295
4
35
20
16 21
8
13
10
10
11 10
10
9
9
9
12
14
15
18
17
19
1
2
Refer to 36 INCH
CARRIER FRAME ASSEMBLY,
Page 4
23
23 24
32
29
29 25
27
27
28
28
30
31
F246
F050
F136
F179
7
76
22
F004
F403
Hardware Used on
Heavy Duty Gearboxes
F038
F278
17
Refer to LUBRICATION POINTS, Page 48.
10
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
42 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 5700-11)
Spring and Pivot Mount Components
1 5975-3 Cable Tie (50# x 7") 4
2 5744-1 Spring Clip Bracket 1
3 5743-1 Spring Cover 2
4 5743-3 Eyebolt (3/8-16 x 2) 2
5 8667-10 Pivot Mount, LH/Adj. 1
6 8667-20 Pivot Mount, RH/Adj. 1
7 5830-3 Grease Fitting (45 Degree) 4
8 5743-6 Extension Spring (1-1/2 x 7-3/4) 2
(Includes Items # 1, F117 & F166)
Carrier Frame Components
9 8674-11 Lever, Deck Lock, LH 1
10 7406-1 Handle Grip (Red) 2
11 8669 Lift Handle 1
12 5748-10 Rubber Mat (1-1/2 x 6) 2
13 5740-2 Deck Pin Bushing (5/8) 4
14 8660-13 42" Carrier Frame (Less Pivots) 1
(Includes Item # 12)
8660-12 42" Carrier Frame w/Forks (Less Pivots) *
(Includes Items # 12, 21-23, 25,
F055, F068 & F098)
15 8674-10 Lever, Deck Lock, RH 1
16 5830 Grease Fitting 6
Caster Wheel Components
17 5714-7 Bearing Cap 4
18 5714-5 Bearing, Caster Wheel 2
19 5715-4 Caster Wheel, Pneumatic (8 x 3.00-4) 2
(Includes Items # 7, 17 & 18)
5715-10 Tire, Pneumatic (8 x 3.00-4) *
5715-9 Tire Tube, Pneumatic (2.80/2.50-4) *
5715-3 Caster Wheel & Tire (8 x 3.00-4) **
5715-11 Tire, Caster Wheel/No-Flat (8 x 3.00-4) **
20 5714-3 Axle Spacer Tube 2
21 5770-1 Caster Wheel Fork 2
22 8768-1 Seal (1-3/4 x 1-1/8) 2
23 8037 Bearing, Cone (3/4 ID) 4
24 8769-1 Bearing Cup (1-3/4 x 1-7/16) 4
25 8769-9 Dust Cap 2
Fasteners
F012 3/8-16 Keps Nut 2
F014 3/8-16 ESNA Nut 2
F020 5/16-18 ESNA Nut 2
F047 3/8-16 x 4-1/2 Hex Bolt 2
F055 5/8 SAE Washer 2
F068 1/8 x 1 Cotter Pin 2
F084 5/16 Wave Spring Washer 2
F098 5/8-18 Slotted Hex Nut 2
F117 Retainer Ring 2
F123 1" External Snap Ring 4
F166 Retainer Ring 2
F226 5/16-18 x 7/8 Hex Bolt 2
F317 3/16 x 1 Split Spring Pin 4
F335 3/8-16 x 7/8 Set Screw, SS 2
F336 3/8-16 Jam Nut 2
*Service Part Only
** May be ordered as a factory-installed option or as a kit for
dealer installation. Contact your Walker dealer.
NOTE: When installing Item # 8 on decks prior to S/N DX-62875,
the swivel hook end should be attached to the deck carrier
frame.
11
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
42 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 5700-11)
F098
F055
F068
23
22
21
24
24
25
23
F117
F335
F336
32
8
10
Refer to DGHS42
DECK ASSEMBLY,
Page 12
16 F226
F226
F084
F084
11
F020
F020
F012
F123
F047
17 20
19 718 17
13 14 10 15 F317
F317
16
4
12
F317
F317
9
5
4
76
1
1
3
F166
F014
Refer to DSD42
DECK ASSEMBLY,
Page 14 Refer to LUBRICATION POINTS, Page 48.
12
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
DGHS42 DECK ASSEMBLY (P/N 5705)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619 PTO Shaft Guard 1
8618 PTO Shaft Guard Assembly *
(Includes Items # 1, 2, F002 & F025)
3 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 26, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
6 5704-50 Gearbox and Tube Assembly 1
(Includes Items # 12-21, F124, F136,
F179 & F211)
5704-8 Heavy Duty Gearbox and Tube Assembly **
(Includes Items # 12-16, 18-21, F136,
F179 & F211)
7 5794 Discharge Chute (6-1/2 Diameter) 1
(Includes Items # 9, 11, F223 & F224)
5794-1 Discharge Chute Assembly with
Spring Mount *
(Includes Items # 6, 7, 10, 11, F223 & F224)
8 8678 Spring Mount, Chute 1
9 8677 Extension Spring (1 x 6-1/16) 1
10 5726 Chute Hinge (2 x 8) 1
11 5755 Chute Lower Lip 1
12 6054 Spline Coupling 4
13 P007 Gasket, Cap (Peerless #788030) 4
14 5063 Gearbox Connector Tube (8-5/8) 1
15 6732-3 Connecting Shaft (6-1/4) 1
16 5052-1 Gearbox (LH Rotation) 2
5052-5 Heavy Duty Gearbox (LH Rotation) **
17 5706-4 Seal Protector Plate 2
18 5704-1 Gearbox Cover Support 2
19 5051-16 Tee Gearbox, Shear 1
5051-6 Heavy Duty Tee Gearbox, Shear **
20 6732-1 Connecting Shaft (2") 1
21 5062 Gearbox Connector Tube (4-3/8) 1
22 5052-3 1.375 x .750 x .187 Washer 4
23 5747-11 Rubber Mat (3 x 6) 2
24 5785-5 42" Gearbox Cover (Includes Item # 23) 1
25 5830 Grease Fitting 1
26 8067-13 Shear Pin w/Cotter (Set of 5) *
(Includes Item # F069)
Deck Housing Components
27 8670 Tilt-Up Hook 1
28 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
29 8490 Roller Wheel Axle Bolt 2
30 NS Deck Serial Number Plate 1
31 5705-3 Blade, 22" (RH Rotation) 1
32 5706 Blade Hub & Trash Guard 2
33 5705-4 Blade, 22" (LH Rotation) 1
5705-8 42 GHS Blade Set with Hubs *
(Includes Items # 31-33, F002 & F202)
34 8735-10 Rubber Mat (5 x 6) 2
35 7775-1 Hitch Pin, LH (Silver) #6 2
36 8788-1 Rubber Mat (1 x 2) 1
37 5704-4 42 GHS Deck Housing 1
(Includes Items # 34 & 36)
38 7775-2 Hitch Pin, RH (Gold) #6 2
39 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 9
F004 1/4-20 Keps Nut 2
F005 1/4-20 ESNA Nut 2
F013 3/8-16 Whiz Locknut 6
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F036 1/4-20 x 1/2 SBH Screw 2
F038 3/8-16 x 1 Hex Bolt 4***
F039 3/8-16 x 1-1/4 Hex Bolt 4
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 2
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw *
F087 #10 x 7/8 Fender Washer 2
F124 10-32 x 3/8 Taptite Machine Screw 6
F129 10-24 x 1/2 PTHMS 3
F136 AN960C416L Washer 20
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 16
F223 3/16 x 5/16 Semi-Tube Rivet *
F224 3/16 x 7/16 Semi-Tube Rivet *
F229 C-Clip (13/16) 4
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 4***
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
*Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchange-
able with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD and MC.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MS.
13
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
DGHS42 DECK ASSEMBLY (P/N 5705)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
27
F004
F403
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
F013
F039
16
2223
24
19
12
25
F295
3
26
F069
F124
17
16
F136 F211 14
21
39
F076
4
5
F013
F013
F059
F229 12
F229
F229
F229
13
13 20
15 13
13
12
28
29
28
F018
F056
F055
F202
F002
38
34
34
32
31
32
33
35
36
37
F025
F029
F002
F050
1
2
12
Refer to 42 INCH
CARRIER FRAME ASSEMBLY,
Page 10
F246
F050
F136
F179
18
18
F002
F002
F005
F223
F224
F036
F087
F129
10
11
8
6
9
7
Hardware Used on
Heavy Duty Gearboxes
F038
F278
22 F206
30
Refer to LUBRICATION POINTS, Page 48.
14
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
DSD42 DECK ASSEMBLY (P/N 5707-10)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619 PTO Shaft Guard 1
8618 PTO Shaft Guard Assembly *
(Includes Items # 1, 2, F002 & F025)
3 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 22, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
6 5704-51 Gearbox and Tube Assembly 1
(Includes Items # 7-17, F124, F136,
F179 & F211)
5704-54 Heavy Duty Gearbox and Tube Assembly **
(Includes Items # 8-17, F136, F179 & F211)
7 5706-4 Seal Protector Plate 3
8 6054 Spline Coupling 4
9 P007 Gasket, Cap (Peerless #788030) 4
10 5063 Gearbox Connector Tube (8-5/8) 1
11 6732-3 Connecting Shaft (6-1/4) 1
12 5052-1 Gearbox (LH Rotation) 1
5052-5 Heavy Duty Gearbox (LH Rotation) **
13 5704-1 Gearbox Cover Support 2
14 5051-16 Tee Gearbox, Shear 1
5051-6 Heavy Duty Tee Gearbox, Shear **
15 6732-1 Connecting Shaft (2") 1
16 5062 Gearbox Connector Tube (4-3/8) 1
17 5053-1 Gearbox (RH Rotation) 1
5053-5 Heavy Duty Gearbox (RH Rotation) **
18 5052-3 1.375 x .750 x .187 Washer 4
19 5747-11 Rubber Mat (3 x 6) 2
20 5785-5 42" Gearbox Cover 1
(Includes Item # 19)
21 5830 Grease Fitting 1
22 8067-13 Shear Pin w/Cotter (Set of 5) *
(Includes Item # F069)
Deck Housing Components
23 8670 Tilt-Up Hook 1
24 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
25 8490 Roller Wheel Axle Bolt 2
26 NS Deck Serial Number Plate 1
27 5705-3 Blade, 22" (RH Rotation) 2
5705-7 42 SD Blade Set with Hubs *
(Includes Items # 27, 28, F002 & F202)
28 5706 Blade Hub & Trash Guard 2
29 7775-1 Hitch Pin, LH (Silver) #6 2
30 8735-10 Rubber Mat (5 x 6) 2
31 8788-1 Rubber Mat (1 x 2) 1
32 5703-3 42 SD Deck Housing 1
(Includes Items # 30 & 31)
33 7775-2 Hitch Pin, RH (Gold) #6 2
34 5709-2 36/42 Discharge Shield 1
35 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 6
F004 1/4-20 Keps Nut 2
F013 3/8-16 Whiz Locknut 6
F014 3/8-16 ESNA Nut 2
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F038 3/8-16 x 1 Hex Bolt 4***
F039 3/8-16 x 1-1/4 Hex Bolt 6
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 4
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw *
F124 10-32 x 3/8 Taptite Machine Screw 9
F136 AN960C416L Washer 20
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 16
F229 C-Clip (13/16) 4
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 4***
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
*Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchange-
able with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD, MC and MW.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MS and MB.
15
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
DSD42 DECK ASSEMBLY (P/N 5707-10)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
13
F136
F179
13
23
F004
F403
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
F013
F039
17
1819
20
14
8
21 F295
3
22
F069
F124
7
12
F136 F211 10
16
35
F014
F076
4
5
F013
F013
F059
F229 8
F229
F229
F229
9
915
11 9
9
8
24
25
24
F018
F056
F055
F202
F002
33
F059
34
F039
30
30
28
27
28
27
29
31
32
F025
F029
F002
F050
1
2
8
Refer to 42 INCH
CARRIER FRAME ASSEMBLY,
Page 10
F246
F050
F206
26
6
Hardware Used on
Heavy Duty Gearboxes
F038
F278
18
Refer to LUBRICATION POINTS, Page 48.
16
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
DML42A DECK ASSEMBLY (P/N 5707-1)
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619 PTO Shaft Guard 1
8618 PTO Shaft Guard Assembly *
(Includes Items # 1, 2, F002 & F025)
3 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 21, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
6 5704-55 42" Mulch Gearbox 1
Tube Assembly, Cast Iron
(Includes Items # 7-16, F136, F179 & F229)
7 6054 Spline Coupling 4
8 P007 Gasket, Cap (Peerless #788030) 4
9 5063 Gearbox Connector Tube (8-5/8) 1
10 6732-3 Connecting Shaft (6-1/4) 1
11 5052-8 Heavy Duty Gearbox (LH Rotation) 1
12 5704-1 Gearbox Cover Support 2
13 5051-6 Heavy Duty Tee Gearbox, Shear 1
14 6732-1 Connecting Shaft (2") 1
15 5062 Gearbox Connector Tube (4-3/8) 1
16 5053-8 Heavy Duty Gearbox (RH Rotation) 1
17 5052-3 1.375 x .750 x .187 Washer 4
18 5747-11 Rubber Mat (3 x 6) 2
19 5785-5 42" Gearbox Cover 1
(Includes Item # 18)
20 5830 Grease Fitting 1
21 8067-13 Shear Pin w/Cotter (Set of 5) *
(Includes Item # F069)
Deck Housing Components
22 8670 Tilt-Up Hook 1
23 9772 Roller Wheel Assembly (2-1/2) 2
(Includes Item # F059)
24 8490 Roller Wheel Axle Bolt 2
25 NS Deck Serial Number Plate 1
26 5705-28 Blade 22" Mulch 2
5705-19 DML42A Blade Set W/Hubs *
(Includes Items # 27, F002 & F202)
27 5706 Blade Hub & Trash Guard 2
28 8735-10 Rubber Mat (5 x 6) 2
29 7775-1 Hitch Pin, LH (Silver) #6 2
30 8788-1 Rubber Mat (1 x 2) 1
31 5701-11 DML42A Deck Housing 1
(Includes Items # 28 & 30)
32 7775-2 Hitch Pin, RH (Gold) #6 2
33 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 6
F004 1/4-20 Keps Nut 2
F013 3/8-16 Whiz Locknut 2
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F038 3/8-16 x 1 Hex Bolt 4
F050 1/4 SAE Washer 4
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 2
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw *
F136 AN960C416L Washer 16
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 12
F229 C-Clip (13/16) 4
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 4
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
*Service Part Only
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD, MC and MW.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MS and MB.
17
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
DML42A DECK ASSEMBLY (P/N 5707-1)
F136F179
12
12
F038
F278 17
16
18
19
13
11 6
F025
F029
F002
F050
1
2
F246
F050
20
F295
3
21
F069
F076
4
5
Refer to 48 INCH
CARRIER FRAME ASSEMBLY,
Page 19
33
32
26
F018
F056
F002
31
28
29
22
F004
F403
F206
25
7
F136
F013
F211 9
23
15
24
F059
F229 7
F229
F229
F229
8
814
10 8
8
7
7
26
27
27
F202
30 28
Refer to LUBRICATION POINTS, Page 48.
18
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
48 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 7700-2)
Spring and Pivot Mount Components
1 5975-3 Cable Tie (50# x 7") 4
2 5744-1 Spring Clip Bracket 1
3 5743-1 Spring Cover 2
4 5743-3 Eyebolt (3/8-16 x 2) 2
5 5830-3 Grease Fitting (45 Degree) 4
6 8667-10 Pivot Mount, LH/Adj/ 1
7 8667-20 Pivot Mount, RH/Adj. 1
8 5743-6 Extension Spring (1-1/2 x 7-3/4) 2
(Includes Items # 1, F117 & F166)
Carrier Frame Components
9 8674-11 Lever, Deck Lock, LH 1
10 7406-1 Handle Grip (Red) 2
11 8669 Lift Handle 1
12 5748-10 Rubber Mat (1-1/2 x 6) 2
13 5740-2 Deck Pin Bushing (5/8) 4
14 8661-2 48" Carrier Frame 1
(Includes Item # 12)
8661-1 48" Carrier Frame w/Forks *
(Includes Items # 12, 21-23, 25,
F055, F068 & F098)
15 8674-10 Lever, Deck Lock, RH 1
16 5830 Grease Fitting 6
Caster Wheel Components
17 5714-7 Bearing Cap 4
18 5714-5 Bearing, Caster Wheel 2
19 5715-4 Caster Wheel, Pneumatic (8 x 3.00-4) 2
(Includes Items # 5, 17 & 18)
5715-10 Tire, Pneumatic (8 x 3.00-4) *
5715-9 Tire Tube, Pneumatic (2.80/2.50-4) *
5715-3 Caster Wheel & Tire (8 x 3.00-4) **
5715-11 Tire, Caster Wheel/No-Flat (8 x 3.00-4) **
20 5714-3 Axle Spacer Tube 2
21 5770-1 Caster Wheel Fork 2
22 8768-1 Seal (1-3/4 x 1-1/8) 2
23 8037 Bearing, Cone (3/4 ID) 4
24 8769-1 Bearing Cup (1-3/4 x 1-7/16) 4
25 8769-9 Dust Cap 2
Fasteners
F012 3/8-16 Keps Nut 2
F014 3/8-16 ESNA Nut 2
F020 5/16-18 ESNA Nut 2
F047 3/8-16 x 4-1/2 Hex Bolt 2
F055 5/8 SAE Washer 2
F068 1/8 x 1 Cotter Pin 2
F084 5/16 Wave Spring Washer 2
F098 5/8-18 Slotted Hex Nut 2
F117 Retainer Ring 2
F123 1" External Snap Ring 4
F166 Retainer Ring 4
F226 5/16-18 x 7/8 Hex Bolt 2
F317 3/16 x 1 Split Spring Pin 4
F335 3/8-16 x 7/8 Set Screw, SS 2
F336 3/8-16 Jam Nut 2
*Service Part Only
** May be ordered as a factory-installed option or as a kit for
dealer installation. Contact your Walker dealer.
NOTE: The 48 Inch Carrier Frame is also used on the DML42A
Mulching Deck (5707-1).
19
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
48 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 7700-2)
Refer to DGHS48
DECK ASSEMBLY,
Page 20
Refer to DSD48
DECK ASSEMBLY,
Page 22
Refer to DML42A
DECK ASSEMBLY,
Page 16
F098
F055
F068
23
22
21
F047
F012
24
24
25
23
13
2
4
4
5
8
7
9
6
12
11
10
18
19
17
20
13 14
16
15
F014
F020 F084
F123 F226
F317
F335
F336
17
16
10
F084
F226
F020
F317 F317
F317
5
F117
F166
3
1
Refer to LUBRICATION POINTS, Page 48.
20
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619 PTO Shaft Guard 1
8618 PTO Shaft Guard Assembly *
(Includes Items # 1, 2, F002 & F025)
3 7285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 25, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 7794 Discharge Chute (3-1/2 x 11-1/2) 1
(Includes Items # 9, 10, F223 & F224)
7794-1 Discharge Chute Assembly with
Spring Mount *
(Includes Items # 5, 7, 9, 10, F223 & F224)
6 5704-58 Gearbox and Tube Assembly 1
(Includes Items # 11-20, F124,
F136, F179 & F211)
5704-9 Heavy Duty Gearbox and Tube Assembly **
(Includes Items # 11-14, 16-20,
F136, F179 & F211)
7 8678 Spring Mount, Chute 1
8 8677 Extension Spring (1 x 6-1/16) 1
9 7726 Chute Hinge (2 x 11) 1
10 7755 Chute Lower Lip 1
11 6054 Spline Coupling 4
12 P007 Gasket, Cap (Peerless #788030) 4
13 5066 Gearbox Connector Tube (9-5/16) 1
14 6732-6 Connecting Shaft (7") 1
15 5706-4 Seal Protector Plate 2
16 5052-1 Gearbox (LH Rotation) 2
5052-5 Heavy Duty Gearbox (LH Rotation) **
17 5704-1 Gearbox Cover Support 2
18 7751-16 Tee Gearbox (1.2:1 Ratio) 1
7751-5 Heavy Duty Tee Gearbox (1.2:1 Ratio) **
19 6732-2 Connecting Shaft (4-1/8) 1
20 5061 Gearbox Connector Tube (6-11/16) 1
21 5052-3 1.375 x .750 x .187 Washer 4
22 5747-12 Rubber Mat (3 x 6) 2
23 7785-3 48" Gearbox Cover 1
(Includes Item # 22)
24 5830 Grease Fitting 1
25 8067-10 Shear Pin w/Cotter (Set of 5) *
(Includes Item # F069)
Deck Housing Components
26 8670 Tilt-Up Hook 1
27 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
28 8490 Roller Wheel Axle Bolt 2
29 NS Deck Serial Number Plate 1
30 7705-1 Blade, 25" (RH Rotation) 1
31 5706 Blade Hub & Trash Guard 2
32 7705-2 Blade, 25" (LH Rotation) 1
7705-3 48 GHS Blade Set with Hubs *
(Includes Items # 30-32, F002 & F202)
33 7775-1 Hitch Pin, LH (Silver) #6 2
34 8735-10 Rubber Mat (5 x 6) 2
35 8788-1 Rubber Mat (1 x 2) 1
36 7701 48 GHS Deck Housing 1
(Includes Items # 34 & 35)
37 7775-2 Hitch Pin, RH (Gold) #6 2
38 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 9
F004 1/4-20 Keps Nut 2
F005 1/4-20 ESNA Nut 2
F013 3/8-16 Whiz Locknut 6
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F036 1/4-20 x 1/2 SBH Screw 2
F038 3/8-16 x 1 Hex Bolt 4***
F039 3/8-16 x 1-1/4 Hex Bolt 4
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 2
F069 3/32 x 1/2 Cotter Pin 1
F087 #10 x 7/8 Fender Washer 2
F124 10-32 x 3/8 Taptite Machine Screw 6
F129 10-24 x 1/2 PTHMS 3
F136 AN960C416L Washer 20
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 12
F223 3/16 x 5/16 Semi-Tube Rivet *
F224 3/16 x 7/16 Semi-Tube Rivet *
F229 C-Clip (13/16) 4
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 4***
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
*Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchange-
able with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
DGHS48 DECK ASSEMBLY (P/N 7702-1)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
21
F002
F002
F005
F036
F087
F129
F013
F039
F295
F069
F124
F136 F211
F013
F013
F059
F229
F229
F229
F229
F018
F056
F055
F202
F002
F029
F002
F050
F025
Refer to 48 INCH
CARRIER FRAME ASSEMBLY,
Page 18
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
Hardware Used on
Heavy Duty Gearboxes
F136
F179
9
10
75
6
8
16
21
22
23
18
11
24
3
25
15
16
13
20
38
4
11
12
12 19
14 12
12
11
27
28
27
37
34
34
31
30
31
32
33
35
36
1
2
11 17
17
F246
F050
F223
F224
F206
29
26
F004
F403
F038
F278
21
Refer to LUBRICATION POINTS, Page 48.
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
DGHS48 DECK ASSEMBLY (P/N 7702-1)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
22
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
DSD48 DECK ASSEMBLY (P/N 7701-17)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619 PTO Shaft Guard 1
8618 PTO Shaft Guard Assembly *
(Includes Items # 1, 2, F002 & F025)
3 7285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 22, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube 9.5" OAL Spline 1
(Includes Item # F076)
6 5704-60 Gearbox and Tube Assembly 1
(Includes Items # 7-17, F124,
F136, F179 & F211)
5704-61 Heavy Duty Gearbox and Tube Assembly **
(Includes Items # 8-17, F136, F179 & F211)
7 5706-4 Seal Protector Plate 2
8 6054 Spline Coupling 4
9 P007 Gasket, Cap (Peerless #788030) 4
10 5066 Gearbox Connector Tube (9-5/16) 1
11 6732-6 Connecting Shaft (7") 1
12 5052-1 Gearbox (LH Rotation) 1
5052-5 Heavy Duty Gearbox (LH Rotation) **
13 5704-1 Gearbox Cover Support 2
14 5051-16 Tee Gearbox, Shear 1
5051-6 Heavy Duty Tee Gearbox, Shear **
15 6732-2 Connecting Shaft (4-1/8) 1
16 5061 Gearbox Connector Tube (6-11/16) 1
17 5053-1 Gearbox (RH Rotation) 1
5053-5 Heavy Duty Gearbox (RH Rotation) **
18 5052-3 1.375 x .750 x .187 Washer 4
19 5747-12 Rubber Mat (3 x 6) 2
20 7785-3 48” Gearbox Cover 1
(Includes Item # 19)
21 5830 Grease Fitting 1
22 8067-13 Shear Pin w/Cotter (Set of 5) *
(Includes Item # F069)
Deck Housing Components
23 8670 Tilt-Up Hook 1
24 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
25 8490 Roller Wheel Axle Bolt 2
26 NS Deck Serial Number Plate 1
27 7705-1 Blade, 25" (RH Rotation) 2
7705-5 48 SD Blade Set with Hubs *
(Includes Items # 27, 28, F002 & F202)
28 5706 Blade Hub & Trash Guard 2
29 7775-1 Hitch Pin, LH (Silver) #6 2
30 8735-10 Rubber Mat (5 x 6) 2
31 8788-1 Rubber Mat (1 x 2) 1
32 7701-18 48 SD Deck Housing 1
(Includes Items # 30 & 31)
33 7775-2 Hitch Pin, RH (Gold) #6 2
34 7707-10 48 SD Skid Bar 1
35 6709-5 48 SD Discharge Shield 1
36 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 6
F004 1/4-20 Keps Nut 6
F013 3/8-16 Whiz Locknut 6
F014 3/8-16 ESNA Nut 2
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F031 1/4-20 x 5/8 Hex Bolt 2
F038 3/8-16 x 1 Hex Bolt 4***
F039 3/8-16 x 1-1/4 Hex Bolt 6
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 4
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw 1
F124 10-32 x 3/8 Taptite Machine Screw 6
F136 AN960C416L Washer 20
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 18
F229 C-Clip (13/16) 4
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 4***
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
*Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchange-
able with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD, MC and MW.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MB.
23
DSD48 DECK ASSEMBLY (P/N 7701-17)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
Refer to 48 INCH
CARRIER FRAME ASSEMBLY,
Page 18
F076 5
6
23
F004
F403
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
F013
F039
17
18
19
20
14
8
21
F295
3
22
F069
F124
7
12
F136 F211 10
16
F206
26
36
F031
4
F013
F013
F059
F229 8
F229
F229
F229
9
9 15
11 9
9
8
24
25
24
F018
F056
F055
F202
F002
33
34
35
F039
F211
F014
F059
F004 F004
30
30
28
27
28
27
29
31
32
F029
F002
F050
F025 2
8
1
13
F136
F179
13
F246
F050
Hardware Used on
Heavy Duty Gearboxes
F038
F278
18
Refer to LUBRICATION POINTS, Page 48.
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
24
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
52 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 8811)
Spring and Pivot Mount Components
1 5744-1 Spring Clip Bracket 1
2 5975-3 Cable Tie (50# x 7") 4
3 5743-1 Spring Cover 2
4 5743-4 Eyebolt (3/8-16 x 2-3/4) 2
5 8667-10 Pivot Mount, LH/Adj. 1
6 5830-3 Grease Fitting (45 Degree) 4
7 8667-20 Pivot Mount, RH/Adj. 1
8 5743-6 Extension Spring (1-1/2 x 7-3/4) 2
(Includes Items # 2, F117 & F166)
Carrier Frame Components
9 8674-11 Lever, Deck Lock, LH 1
10 7406-1 Handle Grip (Red) 2
11 8811-12 52 SD Carrier Frame 1
8811-10 52 SD Carrier Frame, w/ Pivots *
(Includes Items # F335 & F336)
12 5850-5 Handle Grip (1 x 1 x 3-3/4) 1
13 8811-25 Tilt Bar, with Grip (35") 1
(Includes Item # 12)
14 7775-5 Lock Pin (5/16) 1
15 8674-10 Lever, Deck Lock, RH 1
16 8740 Deck Pin Bushing (3/4 ID) 4
17 5830 Grease Fitting 6
Caster Wheel Components
18 8766 Axle Nut (3/4-16) 2
19 8768-2 Seal, Reverse Lip 4
20 8037 Bearing Cone (3/4 ID) 4
21 8037-2 Bearing Race 4
22 8768 Caster Wheel, Pneumatic (11 x 4.00-5) 2
(Includes Items # 6 & 21)
8768-3 Tire, Pneumatic (11 x 4.00-5) *
8768-5 Caster Wheel (5 x 3) *
23 8767 Axle, Caster Wheel (5-1/8) 2
24 8765-10 Caster Wheel Fork 2
25 8769-7 Seal 2
26 8769-6 Bearing Cone (1" ID) 4
27 8769-5 Bearing Cup (2 x 1-5/8) 4
28 8769-8 Dust Cap 2
Fasteners
F014 3/8-16 ESNA Nut 2
F117 Retainer Ring 2
F140 7/16-14 x 1 Hex Bolt 4
F166 Retainer Ring 2
F218 7/16 Split Lock Washer 4
F263 1-1/4 External Snap Ring 4
F317 3/16 x 1 Split Spring Pin 4
F335 3/8-16 x 7/8 Set Screw, SS 2
F336 3/8-16 Jam Nut 2
F344 3/4-16 Slotted Hex Nut 2
F347 3/4 SAE Washer 2
F348 1/8 x 1-1/2 Cotter Pin 2
*Service Part Only
NOTE: The E-Z Pin Puller P/N 8770 can be ordered to assist
removing and installing height adjustment hitch pins on
larger decks. This item stows on tractor when not in use.
25
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
52 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 8811)
17
27
26
25
24
F014 6
Refer to DSD52
DECK ASSEMBLY,
Page 26
1
F166
F335
F336
4
4
3
3
2
2
17
F317
7
5
F317
F317
9
10
11
27
26
F347
F344
28
F348
10
15 F317
14
13
12
F140
F218
F218
F140
18
19
20
21
6
22
21
20
19
23
16
F263
F117
8
ORDER AS P/N 8770
26
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
DSD52 DECK ASSEMBLY (P/N 8810)
Blade Drive Components
1 8789-5 Pulley Guard 1
2 8786-15 Footrest Assembly (Includes Item # 18) 1
3 NS Edge Molding 2
4 8754-10 52 SD Cover Plate (Includes Item # F354) 1
5 8245 Idler Pulley (6") 3
6 8755 Blade Drive Pulley (3-7/8) 3
7 8762 Dampening Spring (Gas) 1
8 5146 10mm Ball Stud 2
9 8373-3 Idler Arm (2-Hole) 1
10 5830 Grease Fitting 6
11 8374-1 Idler Arm Guide 1
12 7201-3 DU Bearing 2
13 7201-4 Inner Race (1-1/2) 1
14 5841 Retainer Washer (3/8 x 1-1/4) 1
15 8736 Blade Drive Belt (R3VX1000-2) 1
16 6240-2 Drive Pulley (4-1/2 / 3V) 1
(Includes Items # F114 & F277)
17 8787 Deck Cover Knob 3
18 8786-10 Rubber Mat (6 x 10-1/2) 2
Gearbox and Dolly Wheel Components
19 6206 Pressure Relief Valve 1
20 8745-25 Dolly Wheel/PTO Guard Assembly *
(Includes Items # 21, 26, 28, 31, 34, 35,
F012, F013, F046, F047, F052, F168,
F226, F339 & F355)
21 6715 Roller Wheel (3-7/8) 3
22 8810-30 Tilt Dolly Mount Frame 1
23 8810-34 Axle, Dolly Mount 1
24 8285-20 U-Joint Shaft Assy, T-Scope 1
(Includes Items # 25, F076 & F277)
25 5830-3 Grease Fitting (45 Degree) 2
26 8788 Rubber Bumper (Self-Adhesive Mount) 1
27 8745-14 Retract Lever 1
28 5850-1 Handle Grip 1
29 8745-12 Actuator Link 1
30 8745-13 Dolly Wheel Mount 1
(Includes Item # 10)
31 8745-15 Axle Spacer Tube 1
32 5229 Extension Spring (1/2 x 2-1/4) 1
33 8745-20 Mount Bracket 1
(Includes Items # 26, F052, F068 & F339)
34 5103-4 Pivot Bushing (3/8 ID) 2
35 8745-40 PTO Cover Plate 1
36 8051-10 Right Angle Gearbox (Includes Item # 19) 1
Deck Housing Components
37 8727 Washer Shim (13/16 x 1/4) 4
38 8775 Hitch Pin (#219) 4
39 8735-10 Rubber Mat (5 x 6) 2
40 8790 Rubber Cushion Strip 3
41 NS Deck Serial Number Plate 1
42 8810-10 52 SD Deck Housing 1
(Includes Items # 39 & 40)
43 8052 Blade Spindle (Includes Item # 10) 3
44 8739 Spindle Shield 3
45 5705-25 Blade Spacer 3
46 5705-14 Blade, 18-1/2 (RH Rotation) 3
8738-7 52 SD Blade Set *
47 8910-5 Tie-Down Strap 2
(Used to secure deck in tilt-up position
during transport)
48 8707 52/62 SD Skid Bar 1
49 8709 52/62 SD Discharge Shield 1
50 5052-3 1.375 x .750 x .187 Washer 12
51 8670-10 Tilt-Up Hook 1
Fasteners
F004 1/4-20 Keps Nut 6
F009 5/16-18 Whiz Locknut 7
F012 3/8-16 Keps Nut 3
F013 3/8-16 Whiz Locknut 14
F014 3/8-16 ESNA Nut 3
F020 5/16-18 ESNA Nut 2
F023 10-24 ESNA Nut 2
F032 1/4-20 x 3/4 Hex Bolt 2
F034 5/16-18 x 3/4 Hex Bolt 1
F039 3/8-16 x 1-1/4 Hex Bolt 2
F040 3/8-16 x 1-1/2 Hex Bolt 12
F041 3/8-16 x 1-3/4 Hex Bolt 3
F045 3/16 x 3/16 x 3/4 Key 3
F046 3/8-16 x 3-1/2 Hex Bolt 1
F048 1/2 SAE Washer 3
F051 3/8 SAE Washer 6
F052 5/16 External Star Lock Washer 2
F055 5/8 SAE Washer 3
F059 3/8 Wave Spring Washer 2
F068 1/8 x 1 Cotter Pin 3
F076 3/8-16 x 5/8 SQH Set Screw 1
F108 3/8-16 x 2 Hex Bolt 1
F114 5/16-18 x 5/8 SQH Set Screw 2
F134 AN960816L Washer 3
F168 5/16 Split Lock Washer 8
F206 #2 x 3/16 Drive Pin 2
F226 5/16-18 x 7/8 Hex Bolt 12
F246 1/4-20 x 7/8 PTHMS 2
F252 10-24 x 3/4 PFHMS 2
F276 5/8-11 Jam Nut 3
F277 3/16 x 5/8 Woodruff Key (#605) 2
F295 3/16 x 1-1/2 Split Spring Pin 2
F339 5/16-18 x 3/4 Self-Tapping Bolt 2
F343 1/2-20 x 2-1/4 Hex Bolt 3
F354 Knurled Thread Insert 5/16 2
F355 3/8 x 16 x 4 Hex Bolt 1
F356 1/4-20 x 5/8 PTHMS 2
*Service Part Only
27
DSD52 DECK ASSEMBLY (P/N 8810)
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
47
44
46
43
45 46
45
44
43 10
5
F041
F051
16
F114
F045
5
6
F012
9
8 7F009
8
F051
10
F004 51
F356
F040
50
F009
F014
F004 48
F034
F206
43
44
45
46
F048
F343
37
38
42
F039
F059
F032
49
41
F108
14
13
12
10
10
F009
F252
11
F023
15
F041
F051
F041
F051
F276
F055
6
40
40
40
39
39
F013
Refer to 52 INCH
CARRIER FRAME ASSEMBLY,
Page 24
F004
3
18 1
F354
4
2
F246
17
20
22
25
F277
F076
24
10
F295
F068
F134
F226
F009
21
23
21
F277
36
F168
F226
19
30
32
F014
F020 F226
F168
10 F134
F068
F046 31 21 F012
27 28
F339
F052
F013
33
F013
34
35
34
F355 26
29 F020
Secure to Vehicle
According to 8653-1
Transport Warning Decal
6
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
28
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
MULCHING KIT (FOR DSD52 DECK ASSEMBLY)
Kit 8691 Mulching Kit (For DSD52 Deck Assembly)
Includes Items # 1-6, fasteners listed and instructions. May be
ordered as a factory-installed option or as a kit for dealer installa-
tion. Contact your Walker dealer. Refer also to DSD52 DECK
ASSEMBLY, page 26.
1 8691-4 Baffle/RH 1
2 8691-3 Baffle/Center 1
3 8691-2 Baffle/LH 1
4 5705-15 Blade, 18-3/8 Upper Mulch 3
8738-8 52 SD Mulching Blade Set *
5 8691-10 Blade Saddle 3
6 5705-14 Blade, 18-1/2 (RH Rotation) 3
Fasteners
F004 1/4-20 Keps Nut 9
F029 1/4-20 x 1/2 Hex Bolt 9
F048 1/2 SAE Washer 3
F343 1/2-20 x 2-1/4 Hex Bolt 3
*Service Part Only. Includes 5705-15 Blades (3 Pieces).
NOTE: Reuse Item # 6 from DSD52 DECK ASSEMBLY. Refer to
DSD52 DECK ASSEMBLY, page 26.
29
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
MULCHING KIT (FOR DSD52 DECK ASSEMBLY)
F048
F343
Refer to DSD52
DECK ASSEMBLY,
Page 26
F004
F029
2
3
1
4
4
4
F004
F029
F029
F029 F029
F029
F029
F004
F004
F004
F004
F004 F029
F004
F004
F029
6
5
5
5
6
6
30
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
56 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 6720)
Spring and Pivot Mount Components
1 5975-3 Cable Tie (50# x 7") 4
2 5744-1 Spring Clip Bracket 1
3 5743-1 Spring Cover 2
4 5743-3 Eyebolt (3/8-16 x 2) 2
5 8667-10 Pivot Mount, LH/Adj. 1
6 5830-3 Grease Fitting (45 Degree) 4
7 8667-20 Pivot Mount, RH/Adj. 1
8 5743-6 Extension Spring (1-1/2 x 7-3/4) 2
(Includes Items # 1, F117 & F166)
Carrier Frame Components
9 8674-11 Lever, Deck Lock, LH 1
10 7406-1 Handle Grip, Red 2
11 5748-10 Rubber Mat (1-1/2 x 6) 2
12 6720-1 56 SD Carrier Frame 1
(Includes Item # 11)
13 5740-2 Deck Pin Bushing (5/8) 4
14 8674-10 Lever, Deck Lock, RH 1
15 5830 Grease Fitting 6
16 5850-5 Handle Grip (1 x 1 x 3-3/4) 1
17 6811-25 Tilt Bar With Grip (30") 1
(Includes Item # 16)
18 7775-5 Lock Pin (5/16) 1
Caster Wheel Components
19 5714-7 Bearing Cap 4
20 5714-5 Bearing, Caster Wheel 2
21 5715-4 Caster Wheel, Pneumatic (8 x 3.00-4) 2
(Includes Items # 6, 19 & 20)
5715-10 Tire, Pneumatic (8 x 3.00-4) *
5715-9 Tire Tube, Pneumatic (2.80/2.50-4) *
5715-3 Caster Wheel & Tire (8 x 3.00-4) **
5715-11 Tire, Caster Wheel/No-Flat (8 x 3.00-4) **
22 5714-3 Axle Spacer Tube 2
23 5770-1 Caster Wheel Fork 2
24 8768-1 Seal (1-3/4 x 1-1/8) 2
25 8037 Bearing, Cone (3/4 ID) 4
26 8769-1 Bearing Cup (1-3/4 x 1-7/16) 4
27 8769-9 Dust Cap 2
Fasteners
F012 3/8-16 Keps Nut 2
F014 3/8-16 ESNA Nut 2
F047 3/8-16 x 4-1/2 Hex Bolt 2
F055 5/8 SAE Washer 2
F068 1/8 x 1 Cotter Pin 2
F098 5/8-18 Slotted Hex Nut 2
F117 Retainer Ring 2
F123 1" External Snap Ring 4
F166 Retainer Ring 2
F317 3/16 x 1 Split Spring Pin 4
F335 3/8-16 x 7/8 Set Screw, SS 2
F336 3/8-16 Jam Nut 2
*Service Part Only
** May be ordered as a factory-installed option or as a kit for
dealer installation. Contact your Walker Dealer.
NOTE: When installing Item # 8 on decks prior to S/N DX-62875,
the swivel hook end should be attached to the deck carrier
frame.
31
56 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 6720)
F098
F055
F068
25
24
23
26
26
27
25
15 16
17
18
F012
F123
F047
19 22
21
620 19
2
1
76
8
4
9
11
10
13
14
12
F014
F117
F317 F335 F336
15
10
F317
F317
F317
5
F166 13
3
4
Refer to DSD56
DECK ASSEMBLY,
Page 32
Refer to LUBRICATION POINTS, Page 48.
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
32
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
DSD56 DECK ASSEMBLY (P/N 6720-20)
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619-2 PTO Shaft Guard 1
8618-3 PTO Shaft Guard Assembly *
(Includes Items # 1, 2, F002 & F025)
3 7275-16 U-Joint Tube Assy, Spline 1
4 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
5 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 22, F069 & F295)
6 5052-6 Heavy Duty Gearbox/LH (1:1.2 Ratio) 1
7 6701-51 56SD Gearbox - Tube Assembly/CstIrn 1
(Includes Items # 8-20, F138, F179 & F211)
8 6054 Spline Coupling 5
9 P007 Gasket, Cap (Peerless #788030) 6
10 5069 Gearbox Connector Tube (14-1/2) 1
11 6732-9 Connecting Shaft (12-1/8) 1
12 5058-6 Heavy Duty Tee Gearbox (1:1.2 Ratio) 1
13 5060 Gearbox Connector Tube (2-5/16) 1
14 6732-3 Connecting Shaft (6-1/4) 1
15 5063 Gearbox Connector Tube (8-5/8) 1
16 5053-6 Heavy Duty Gearbox/RH (1:1.2 Ratio) 1
17 5052-3 1.375 x .750 x .187 Washer 6
18 6786 56 SD Gearbox Cover 1
(Includes Item # 19)
19 5747-10 Rubber Mat, No-Hole (3 x 6) 2
20 5704-1 Gearbox Cover Support 2
21 5051-6 Heavy Duty Tee Gearbox, Shear 1
22 8067-13 Shear Pin w/Cotter (Set of 5) *
(Includes Item # F069)
23 5830 Grease Fitting 1
Deck Housing Components
24 8670-8 Tilt-Up Hook 1
25 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
26 8490 Roller Wheel Axle Bolt 2
27 NS Deck Serial Number Plate 1
28 5705-0 Blade, 20" (RH Rotation) 3
5705-9 56 SD Blade Set with Hubs *
(Includes Items # 28, 29, F002 & F202)
29 5706 Blade Hub & Trash Guard 3
30 8735-10 Rubber Mat (5 x 6) 2
31 7775-1 Hitch Pin, LH (Silver) #6 2
32 6715 Roller Wheel (3-7/8) 2
33 8910-5 Tie Down Strap 2
34 8788-1 Rubber Mat (1 x 2) 1
35 6720-10 56 SD Deck Housing 1
(Includes Items # 30 & 34)
36 7775-2 Hitch Pin, RH (Gold) #6 2
37 6707-6 56 SD Skid Bar 1
38 6705-8 56 SD Discharge Shield 1
39 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 8
F004 1/4-20 Keps Nut 4
F013 3/8-16 Whiz Locknut 2
F014 3/8-16 ESNA Nut 2
F016 1/2-13 Self-Locking Nut 1
F018 5/8-18 Hex Nut 3
F020 5/16-18 ESNA Nut 1
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F032 1/4-20 x 3/4 Hex Bolt 2
F038 3/8-16 x 1 Hex Bolt 6
F039 3/8-16 x 1-1/4 Hex Bolt 8
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 3
F056 5/8 Split Lock Washer 3
F059 3/8 Wave Spring Washer 4
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw *
F136 AN960C416L Washer 24
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 6
F206 #2 x 3/16 Drive Pin 2
F208 5/16-18 x 2-1/4 Hex Bolt 1
F211 1/4-20 x 7/8 Hex Bolt 26
F229 C-Clip (13/16) 4
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 6
F295 3/16 x 1-1/2 Split Spring Pin 1
F400 1/2-13 x 5-1/2 Hex Bolt 1
*Service Part Only
NOTE: Order Item # 3 to use the splined deck PTO shaft with
Model MT, MD, MC and MW.
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MB.
33
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
DSD56 DECK ASSEMBLY (P/N 6720-20)
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
25
26
Refer to 56 INCH
CARRIER FRAME ASSEMBLY,
Page 30
F013
F059
F025
F246
F050
F002 F029 F050 2
1
18
19
F076
34
5
F295
F136
F179 23
22
F069
21
20
67
8F229
F229
F229
F229
8
8
8
9
9
9
9
9
9
F136 F211 15 14
13
12
11
F136
F211 10
39
27 F206
F032
F004
F020 24
F208
F039
F004
38
37
F211 F059
F014
36 30 35 34
33 F400 32
F016 31 30
F202
29
F002
F055
F056
F018
28 29
29
28
28
25
20
Secure to Vehicle
According to 8653-1
Transport Warning Decal
F038
F278 17
16
Refer to LUBRICATION POINTS, Page 48.
34
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
62 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 8911)
Spring and Pivot Mount Components
1 5744-1 Spring Clip Bracket 1
2 5975-3 Cable Tie (50# x 7") 4
3 5743-1 Spring Cover 2
4 8667-10 Pivot Mount, LH/Adj. 1
5 5830-3 Grease Fitting (45 Degree) 4
6 8667-20 Pivot Mount, RH/Adj. 1
7 5743-4 Eyebolt (3/8-16 x 2-3/4) 2
8 5743-6 Extension Spring (1-1/2 x 7-3/4) 2
(Includes Items # 2, F117 & F166)
Carrier Frame Components
9 8674-11 Lever, Deck Lock, LH 1
10 7406-1 Handle Grip (Red) 2
11 8911-12 62 SD Carrier Frame 1
8911-10 62 SD Carrier Frame, w/ Pivots *
(Includes Items # 4, 6, 9, 15,
F317, F335 & F336)
12 5850-5 Handle Grip (1 x 1 x 3-3/4) 1
13 8911-25 Tilt Bar With Grip (42-1/2) 1
(Includes Item # 12)
14 7775-5 Lock Pin (5/16) 1
15 8674-10 Lever, Deck Lock, RH 1
16 8740 Deck Pin Bushing (3/4 ID) 4
17 5830 Grease Fitting 6
Caster Wheel Components
18 8766 Axle Nut (3/4-16) 2
19 8768-2 Seal, Caster Wheel 4
20 8037 Bearing Cone (3/4 ID) 4
21 8037-2 Bearing Race 4
22 8768 Caster Wheel, Pneumatic (11 x 4.00-5) 2
(Includes Items # 5 & 21)
8768-3 Tire, Pneumatic (11 x 4.00-5) *
8768-5 Caster Wheel (5 x 3) *
23 8767 Axle, Caster Wheel (5-1/8) 2
24 8765-10 Caster Wheel Fork 2
25 8769-7 Seal 2
26 8769-6 Bearing Cone (1" ID) 4
27 8769-5 Bearing Cup 4
28 8769-8 Dust Cap 2
Fasteners
F014 3/8-16 ESNA Nut 2
F117 Retainer Ring 2
F140 7/16-14 x 1 Hex Bolt 4
F166 Retainer Ring 2
F218 7/16 Split Lock Washer 4
F263 1-1/4 External Snap Ring 4
F317 3/16 x 1 Split Spring Pin 4
F335 3/8-16 x 7/8 Set Screw, SS 2
F336 3/8-16 Jam Nut 2
F344 3/4-16 Slotted Hex Nut 2
F347 3/4 SAE Washer 2
F348 1/8 x 1-1/2 Cotter Pin 2
*Service Part Only
NOTE: The E-Z Pin Puller P/N 8770 can be ordered to assist
removing and installing height adjustment hitch pins on
larger decks. This item stows on tractor when not in use.
35
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
62 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 8911)
17
27
26
25
24
F014
5
8
Refer to DSD62
DECK ASSEMBLY,
Page 36
1
F166
F117
F335
F336
7
7
3
2
2
17
F317
6
4
F317
F317
9
10
27
26
F347
F344
28
F348
16
10
15 F317
F263
14
13
12
11
F140
F218
F218
F140
18
19
20
21
5
22
21
20
19
23
3
ORDER AS P/N 8770
36
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
DSD62 DECK ASSEMBLY (P/N 8910)
Blade Drive Components
1 8789-5 Pulley Guard 1
2 8786-15 Footrest Assembly (Includes Item # 18) 1
3 NS Edge Molding 2
4 8785-10 62 SD Cover Plate 1
5 8245 Idler Pulley (6") 3
6 8240 Blade Drive Pulley (4-1/2) 3
7 8762 Dampening Spring (Gas) 1
8 5146 10mm Ball Stud 2
9 8373-3 Idler Arm (2-Hole) 1
10 5830 Grease Fitting 5
11 8374-1 Idler Arm Guide 1
12 7201-3 DU Bearing 2
13 7201-4 Inner Race (1-1/2) 1
14 5841 Retainer Washer (3/8 x 1-1/4) 1
15 8731 Blade Drive Belt, (2/3VX1180) 1
16 6240-2 Drive Pulley (4-1/2 / 3V) 1
(Includes Items # F114 & F277)
17 8787 Deck Cover Knob 3
18 8786-10 Rubber Mat (6 x 10-1/2) 2
Gearbox and Dolly Wheel Components
19 6206 Pressure Relief Valve 1
20 8745-25 Dolly Wheel/PTO Guard Assembly *
(Includes Items # 23, 24, 26, 29, 30, 33,
F012, F013, F046, F047, F052, F168,
F226, F339 & F355)
21 8285-20 U-Joint Shaft Assy, T-Scope 1
(Includes Items # 22, F076 & F277)
22 5830-3 Grease Fitting (45 Degree) 2
23 5103-4 Pivot Bushing (3/8 ID) 2
24 8788 Rubber Bumper (Self-Adhesive Mount) 1
25 8745-14 Retract Lever 1
26 5850-1 Handle Grip 1
27 8745-12 Actuator Link 1
28 8745-13 Dolly Wheel Mount 1
(Includes Item # 10)
29 6715 Roller Wheel (3-7/8) 1
30 8745-15 Axle Spacer Tube 1
31 5229 Extension Spring (1/2 x 2-1/4) 1
32 8745-20 Mount Bracket 1
(Includes Items # 24, F052, F068 & F339)
33 8745-40 PTO Cover Plate 1
34 8051-10 Right Angle Gearbox (Includes Item # 19) 1
Deck Housing Components
35 8790 Rubber Cushion Strip 3
36 8727 Washer Shim (13/16 x 1/4) 4
37 8775 Hitch Pin (#219) 4
38 8735-10 Rubber Mat (5 x 6) 2
39 8720-30 Anti-Scalp Wheel Mount 3
40 8745-30 Axle Spacer Tube 3
41 6715-1 Roller Wheel (5") 3
42 NS Deck Serial Number Plate 1
43 8910-10 62 SD Deck Housing 1
(Includes Items # 35 & 38)
44 8052 Blade Spindle (Includes Item # 13) 3
45 8739 Spindle Shield 3
46 5705-3 Blade, 22" (RH Rotation) 3
5705-13 62 SD Blade Set *
47 8728 Machine Bushing (1/2 x 1-1/2) 3
48 8910-5 Tie-Down Strap 2
(Used to secure deck in tilt-up position
during transport)
49 8707 52/62 SD Skid Bar 1
50 8709 52/62 SD Discharge Shield 1
51 5052-3 1.375 x .750 x .187 Washer 12
52 8670-10 Tilt-Up Hook 1
Fasteners
F004 1/4-20 Keps Nut 6
F009 5/16-18 Whiz Locknut 3
F012 3/8-16 Keps Nut 11
F013 3/8-16 Whiz Locknut 14
F014 3/8-16 ESNA Nut 3
F020 5/16-18 ESNA Nut 2
F023 10-24 ESNA Nut 2
F032 1/4-20 x 3/4 Hex Bolt 2
F034 5/16-18 x 3/4 Hex Bolt 1
F038 3/8-16 x 1 Hex Bolt 6
F039 3/8-16 x 1-1/4 Hex Bolt 2
F040 3/8-16 x 1-1/2 Hex Bolt 12
F041 3/8-16 x 1-3/4 Hex Bolt 3
F045 3/16 x 3/16 x 3/4 Key 3
F046 3/8-16 x 3-1/2 Hex Bolt 4
F051 3/8 SAE Washer 6
F052 5/16 External Star Lock Washer 2
F055 5/8 SAE Washer 3
F059 3/8 Wave Spring Washer 2
F068 1/8 x 1 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw 1
F108 3/8-16 x 2 Hex Bolt 1
F114 5/16-18 x 5/8 SQH Set Screw 2
F134 AN960816L Washer 1
F168 5/16 Split Lock Washer 8
F206 #2 x 3/16 Drive Pin 2
F226 5/16-18 x 7/8 Hex Bolt 8
F241 .375 x .875 x .10 Washer 6
F246 1/4-20 x 7/8 PTHMS 2
F252 10-24 x 3/4 PFHMS 2
F265 1/2-20 x 1-1/2 Hex Bolt 3
F276 5/8-11 Jam Nut 3
F277 3/16 x 5/8 Woodruff Key (#605) 2
F339 5/16-18 x 3/4 Self-Tapping Bolt 2
F354 Knurled Thread Insert 5/16 2
F355 3/8 x 16 x 4 Hex Bolt 1
F356 1/4-20 x 5/8 PTHMS 2
*Service Part Only
DSD62 DECK ASSEMBLY (P/N 8910)
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
15
F034 F009
F013
35
38
F252
43
F168
20
F277 F076 21
F046
F241
41
40
F241
F012
39
F038
46
45
44
10
48
46
45
44
10
F265
47
46
45
44
10
9
34
F277
19
F226
36 37
35
38
35
F032
F004
49
50
F039
F059 F014
F009
8
F051
7
8
51 F004 52
F356
F023
11
F009
10
12
13
14
F108
F040
42
F206
F045
6
F055
F276
5
F012 6
5
16
F114
F041
F041
F041
6
Refer to 62 INCH
CARRIER FRAME ASSEMBLY,
Page 34
18
F354
4
3
F004 1
2
F246
17
F051 F051
F051
Secure to Vehicle
According to 8653-1
Transport Warning Decal
22
23
F355
F020
28
31
F014
F020 F226
F168
10 F134
F068
F046 30 29 F012
25 26
F339
F052
F013
32
F013
23
33
24
27
37
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
38
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
74 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 7803)
Spring and Pivot Mount Components
1 5744-1 Spring Clip Bracket 1
2 5975-3 Cable Tie (50# x 7") 4
3 5743-1 Spring Cover 2
4 8667-10 Pivot Mount, LH/Adj. 1
5 5830-3 Grease Fitting (45 Degree) 4
6 8667-20 Pivot Mount, RH/Adj. 1
7 5743-4 Eyebolt (3/8-16 x 2-3/4) 2
8 5743-6 Extension Spring (1-1/2 x 7-3/4) 2
(Includes Items # 2, F117 & 166)
Carrier Frame Components
9 8674-11 Lever, Deck Lock, LH 1
10 7406-1 Handle Grip (Red) 2
11 7803-1 74 SD Carrier Frame 1
(Includes Item # 15)
12 5850-5 Handle Grip (1 x 1 x 3-3/4) 1
13 8811-25 Tilt Bar with Grip (35") 1
(Includes Item # 12)
14 7775-5 Lock Pin (5/16) 1
15 5748-10 Rubber Mat (1-1/2 x 6) 2
16 8674-10 Lever, Deck Lock, RH 1
17 8740 Deck Pin Bushing (3/4 ID) 4
18 5830 Grease Fitting 6
Caster Wheel Components
19 8766 Axle Nut (3/4-16) 2
20 8768-2 Seal, Reverse Lip 4
21 8037 Bearing Cone (3/4 ID) 4
22 8037-2 Bearing Race 4
23 8768 Caster Wheel, Pneumatic (11 x 4.00-5) 2
(Includes Items # 5 & 21)
8768-3 Tire, Pneumatic (11 x 4.00-5) *
8768-5 Caster Wheel (5 x 3) *
24 8767 Axle, Caster Wheel (5-1/8) 2
25 8765-10 Caster Wheel Fork 2
26 8769-7 Seal 2
27 8769-6 Bearing Cone (1" ID) 4
28 8769-5 Bearing Cup 4
29 8769-8 Dust Cap 2
Fasteners
F014 3/8-16 ESNA Nut 2
F117 Retainer Ring 2
F140 7/16-14 x 1 Hex Bolt 4
F166 Retainer Ring 2
F218 7/16 Split Lock Washer 4
F263 1-1/4 External Snap Ring 4
F317 3/16 x 1 Split Spring Pin 4
F335 3/8-16 x 7/8 Set Screw, SS 2
F336 3/8-16 Jam Nut 2
F344 3/4-16 Slotted Hex Nut 2
F347 3/4 SAE Washer 2
F348 1/8 x 1-1/2 Cotter Pin 2
*Service Part Only
NOTE: The E-Z Pin Puller P/N 8770 can be ordered to assist
removing and installing height adjustment hitch pins on
larger decks. This item stows on tractor when not in use.
39
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
74 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 7803)
18
28
27
26
24
5
F014
8
Refer to DSD74
DECK ASSEMBLY,
Page 40
1
F166
F117
F335
F336
7
7
3
2
2
18
F317
6
4
F317
F317
9
10
28
27
F347
F344
29
F348
17
10
16 F317
F263
14
13
12
11
5
23
22 22
21 21
20
20 19
24
3
15
25
F140
F218
F218
F140
ORDER AS P/N 8770
Refer to LUBRICATION POINTS, Page 48.
40
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
DSD74 DECK ASSEMBLY (P/N 7803-2)
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619 PTO Shaft Guard 1
8618 PTO Shaft Guard Assembly *
(Includes Items # 1, 2, F002 & F025)
3 7275-16 U-Joint Tube Assy, Spline 1
4 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # F069 & F295)
5 7865-6 74 SD Gearbox Cover/RH 1
(Includes Items # 6 & 8)
6 5747-10 Rubber Mat, No-Hole (3 x 6) 2
7 7865-5 74 SD Gearbox Cover/LH 1
(Includes Items # 6 & 8)
8 8790 Rubber Cushion Strip 2
9 8067-13 Shear Pin w/Cotter (Set of 5) 1
(Includes Item # F069)
10 5830 Grease Fitting 1
11 5052-3 1.375 x .750 x .187 Washer 8
Heavy Duty Drive Components
12 5053-6 Blade Drive Gearbox/RH (1:1.2) Cast Iron 1
13 P007 Gasket, Cap (P#788030) 8
14 5058-6 Tee Gearbox Blade Drive (1:1.2) Cast Iron 2
15 5051-6 Tee Gearbox, Shear Cast Iron 1
16 5052-6 Blade Drive Gearbox/LH (1:1.2) Cast Iron 1
17 5704-1 Gearbox Cover Support 3
18 6054 Spline Coupling 7
19 5069 Connector Tube (14-1/2) 2
20 6732-9 Connecting Shaft (12-1/8) 2
21 5063 Connector Tube (8-5/8) 1
22 6732-3 Connecting Shaft (6-1/4) 1
23 5060 Connector Tube (2-5/16) 1
Deck Housing Components
24 8786-10 Rubber Mat (6 x 10-1/2) 4
25 8670-8 Tilt-Up Hook 1
26 7803-3 74 SD Deck Housing 1
(Includes Items # 24 & 42)
27 NS Deck Serial Number Plate 1
28 7866-1 Lock Lever, Rear Caster 2
29 7775-5 Lock Pin (5/16) 2
30 5683 Pivot Bearing 4
31 7866 74 SD Rear Fork Mount 2
(Includes Item # 30)
32 7870 74 SD Rear Fork 2
33 5714-3 Axle Spacer Tube 2
34 7868 74 SD Caster Wheel/Rear 2
35 6715 Roller Wheel (3-7/8) 2
36 7807-1 74 SD Skid Bar 1
37 7809-1 74 SD Discharge Shield 1
38 5706 Blade Hub & Trash Guard 4
39 5705-0 Blade 20” (RH Rotation) 4
5705-16 74 SD Blade Set with Hubs *
(Includes Items # 38, 39, F002 & F202)
40 8775 Hitch Pin (#219) 4
41 8727 Washer Shim (13/16 x 1/4) 4
42 8788-1 Rubber Mat (1 x 2) 1
43 5704-32 74 GB-Tube Assembly/Cast Iron 1
(Includes Items # 5-8, 12-23 & F229)
Fasteners
F002 10-24 Keps Nut 10
F004 1/4-20 Keps Nut 4
F012 3/8-16 Keps Nut 2
F014 3/8-16 ESNA Nut 2
F016 1/2-13 Self-Locking Nut 2
F018 5/8-18 Hex Nut 4
F020 5/16-18 ESNA Nut 1
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F031 1/4-20 x 5/8 Hex Bolt 2
F038 3/8-16 x 1 Hex Bolt 10
F039 3/8-16 x 1-1/4 Hex Bolt 2
F047 3/8-16 x 4-1/2 Hex Bolt 2
F050 1/4 SAE Washer 5
F055 5/8 SAE Washer 4
F056 5/8 Split Lock Washer 4
F059 3/8 Wave Spring Washer 2
F063 3/8 Int. Star Lock 2
F069 3/32 x 1/2 Cotter Pin 1
F119 Rear Caster Spacer 4
F136 AN960C416L Washer 32
F179 1/4-20 x 1 Hex Bolt 6
F191 3/8 x 1-1/2 x 3/16 Washer 2
F202 10-24 x 5/8 SHC Screw, GR5 SS 8
F206 #2 x 3/16 Drive Pin 2
F208 5/16-18 x 2-1/4 Hex Bolt 1
F211 1/4-20 x 7/8 Hex Bolt 24
F229 C-Clip (13/16) 6
F246 1/4-20 x 1/2 PTHMS 3
F278 3/8 Split Lock Washer 8
F295 3/16 x 1-1/2 Split Spring Pin 1
F399 1/2-13 x 3-1/4 Hex Bolt 2
*Service Part Only
41
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
DSD74 DECK ASSEMBLY (P/N 7803-2)
F029
F002 F050
F025 2
1
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
F018
F056
F055
F202 F016
F016
F002
39
39
38
35
35
F399
F399
42
38
43
38
38
F012
F119
33
F119 F047
34
39
39
11 F038
F031
41
40
37
13
21
13
22
23
13
13
18
18
18
13
18 18
20
13
19
13 18
26
14
15
6
14
16
F278
10
9
F295
7
5
F069
3
4
8
17
10
12
17
27
24
24
28
F206
F208
25
F020
F004
F014
F059
F039
F211 36
F004
29 F038
F063
F191
30
31
30
32
24
Refer to 74 INCH
CARRIER FRAME ASSEMBLY,
Page 38
F246
F050
F246
F050
F246
F050
F136 F211
F136
F136
F229
F229
F229
F229
F229
F229
F136
19
13
20
18
6
F136
F179
F211
F211
F211
42
Use only genuine Walker® replacement parts. Effective Date 07-01-06
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
OPTIONAL BREAK-AWAY BLADES
DSD 42" Break-Away Blade Kit (5705-33)
1 5706 Blade Hub & Trash Guard 2
2 5706-27 Blade Hub, 42" 2
3 5705-30 Break Away Blade 4
4 5705-17 Special Bolt (1/2-13 x 1-7/16) 4
DSD 48" Break-Away Blade Kit (7705-8)
1 5706 Blade Hub & Trash Guard 2
2 5706-25 Blade Hub, 48" 2
3 5705-30 Break Away Blade 4
4 5705-17 Special Bolt (1/2-13 x 1-7/16) 4
DSD 56" Break-Away Blade Kit (5705-32)
1 5706 Blade Hub & Trash Guard 3
2 5706-26 Blade Hub, 36, 56 & 74 3
3 5705-30 Break Away Blade 3
4 5705-17 Special Bolt (1/2-13 x 1-7/16) 6
DSD 74" Break-Away Blade Kit (5705-34)
1 5706 Blade Hub & Trash Guard 4
2 5706-26 Blade Hub, 36, 56 & 74 4
3 5705-30 Break Away Blade 4
4 5705-17 Special Bolt (1/2-13 x 1-7/16) 8
Fasteners
F002 10-24 Keps Nut *
F016 1/2-13 Self-Locking Nut *
F048 1/2 SAE Washer *
F202 10-24 x 5/8 SHC Screw, GR5 SS *
F382 Belleville Washer (.650 x 1.36) *
*Quantities vary
NOTE: Optional blade kit featuring blades mounted on a break-
away hub, for use in mowing applications with lots of
ground and debris contact, to minimize impact and shock
loading.
NOTE: Break-Away blades are designed for use on Side-Dis-
charge decks only.
1
3
3
44
2
F202
F016
F202
F016
F382
F002
F382
F002
Refer to DSD56
DECK ASSEMBLY,
Page 32
F048 F048
43
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
BLADE USAGE CHART
Right hand and left hand orientated with operator on seat
All blade sets include 5706 (Blade Hub & Trash Guard), F002 & F202 unless otherwise specified
* Blade set consists of three (3) blades
TWO BLADE DECKS RH BLADE LH BLADE BLADE SET
DGHS36 5705-2 5705-0 5705-6
DSD36 5705-1 5705-1 5705-5
DGHS42 5705-4 5705-3 5705-8
DSD42 5705-3 5705-3 5705-7
DML42A 5705-28 5705-28 5705-19
DGHS48 7705-2 7705-1 7705-3
DSD48 7705-1 7705-1 7705-5
THREE & FOUR BLADE DECKS SINGLE BLADE BLADE SET
DSD52 5705-14 8738-7*
DSD52 MULCHING
UPPER BLADE 5705-15 8738-7*
DSD52 MULCHING
LOWER BLADE 5705-14 8738-8*
DSD56 5705-0 5705-9
DSD62 5705-3 5705-13
DSD74 5705-0 5705-16
F018
F056
F055
F202
Right-Hand Blade
Left-Hand Blade
F002
Refer to DGHS48
DECK ASSEMBLY,
Page 20
Use only genuine Walker® replacement parts. Effective Date 07-01-06
44
I T E M P A R T D E S C R I P T I O N L O C AT I O N N O .
NO. NO. REQ’D
DECK WELDMENT REPLACEMENT PARTS
NOTE: All parts listed in this section are for Weld-On Repair; Cutting, Grinding, and Welding are required to replace these parts.
DSD52 & DSD62 Weldments
1 8733-3 Rim Rod, RH Rear (20-3/4) DSD52 1
8751-2 Rim Rod, RH Rear (28-3/8) DSD62 1
2 8760-2 Rear Deck Pin (3/4 x 5-3/4) DSD52, DSD62 & DSD74 2
3 8733-63 Rim Rod, LH Rear (28-3/4) DSD52 1
8751-3 Rim Rod, LH Rear (34-3/8) DSD62 1
4 8733-5 Rim Rod, LH Front (22-7/8) DSD52 1
8751-4 Rim Rod, LH Front (28-5/16) DSD62 1
5 8760-1 Front Deck Pin (3/4 x 7-5/8) DSD52 & DSD62 2
6 8733-61 Rim Rod, Front Center (26-5/8) DSD52 1
8751-5 Rim Rod, Front Center (29-1/4) DSD62 1
7 8733-10 Rim Rod, RH Front (16-1/4) DSD52 1
8751-6 Rim Rod, RH Front (19-1/4) DSD62 1
DSD56 Weldments
8 6752-1 Deck Cap Strip, 56SD Rear (33-5/16) DSD56 1
9 5760-4 Rear Deck Pin (5/8 x 5-3/8) All Decks Except DSD52, DSD62 & DSD74 2
10 6752-6 Deck Cap Strip, 56SD LH (39") DSD56 & DSD74 1
11 5760-7 Front Deck Pin (5/8 x 5-3/4) DSD56 2
12 6752-4 Deck Cap Strip, 56SD Front (42") DSD56 1
DSD74 Weldments
9 8760-2 Rear Deck Pin (3/4 x 5-3/4) DSD52, DSD62 & DSD74 2
11 7865-18 Front Deck Pin (3/4 x 6-5/8) DSD74 2
13 8751-7 Rim Rod, LH DSD74 1
14 8751-8 Rim Rod, Front (13-1/2) DSD74 1
DGHS Weldments
9 5760-4 Rear Deck Pin (5/8 x 5-3/8) All Decks Except DSD52, DSD62 & DSD74 2
11 5760-3 Front Deck Pin (5/8 x 5-3/4) All Decks Except DSD52, DSD56, DSD62 & DSD74 2
15 5751-3 Deck Cap Strip, GHS LH (43-3/4) DGHS36 1
5751-1 Deck Cap Strip, GHS LH (49-3/8) DGHS42 1
7701-10 Edge Stiffener, Side (42-3/8) DGHS48 2
16 7701-11 Edge Stiffener, Front (21-7/8) DGHS48 1
17 5751-4 Deck Cap Strip, GHS RH (47-5/8) DGHS36 1
5751-2 Deck Cap Strip, GHS RH (49-3/8) DGHS42 1
DSD & DML Weldments
9 5760-4 Rear Deck Pin (5/8 x 5-3/8) All Decks Except DSD52, DSD62 & DSD74 2
11 5760-3 Front Deck Pin (5/8 x 5-3/4) All Decks Except DSD52, DSD56, DSD62 & DSD74 2
18 5702-6 Deck Cap Strip, (47") DSD36 1
5751-5 Deck Cap Strip, 42" SD LH (47") DSD42 1
19 5751-6 Deck Cap Strip, 42" SD Front (3-9/16) DSD42 1
20 5751-11 DML42A Edge Stiffener DML42A 2
21 5751-12 DML42A Front Stiffener DML42A 1
22 5751-14 DML42A Deck Cap Strip/RH DML42A 1
23 5751-13 DML42A Deck Cap Strip/LH DML42A 1
45
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
DECK WELDMENT REPLACEMENT PARTS
DSD36, DSD42 & DML42A
Deck & Carrier Frame Assemblies
11
19
20
11
99
18
14
9
9
8
11
11
13
17 9
11
16
11
9
15
DSD52 & DSD62
Deck & Carrier Frame Assemblies
DGHS36, DGHS42 & DGHS48
Deck & Carrier Frame Assemblies DSD56 & DSD74 Deck
& Carrier Frame Assembly
(DSD74 Outline Shown)
12
10
2
1
5
6
4
7
3
2
5
20
21
22
23
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker® replacement parts. Effective Date 07-01-06
46
DECK HEIGHT ADJUSTER KIT
8639 36" Deck Height Adjuster Kit (Shown)
1NA
2 8640-2 Chain Guide 4
3 8640-4 Joining Link 8
4 8640-7 Knob, Deck Height Adjuster 1
5 8640-8 Handle 1
8 8640-3 Bushing 2
9 8640-6 Mount Block 4
10 8640-5 Chain Anchor, Front 4
11 8640-13 Front Chain (19 Links) 2
13 8640-9 Compression Spring 1
14 8641-10 Extension Spring, (6-1/4") 1
(48" Carrier Frame)
8640 42" Deck Height Adjuster Kit
1 8640-12 Rear Chain 2
2 8640-2 Chain Guide 4
3 8640-4 Joining Link 8
4 8640-7 Knob, Deck Height Adjuster 1
5 8640-8 Handle 1
6 8640-15 Sprocket, LH (972) 1
7 8640-11 Chain Anchor, Rear 2
8 8640-3 Bushing 2
9 8640-6 Mount Block 4
10 8640-5 Chain Anchor, Front 2
11 8640-13 Front Chain (19 Links) 2
12 8640-14 Sprocket, RH (973) 1
13 8640-9 Compression Spring (2-3/4) 1
14 8640-10 Extension Spring (1 x 5-3/8) 1
(42" Carrier Frame)
8641 48" Deck Height Adjuster Kit
1 8641-12 Rear Chain 2
(48" Carrier Frame - 41 Links)
2 8640-2 Chain Guide 4
3 8640-4 Joining Link 8
4 8640-7 Knob, Deck Height Adjuster 1
5 8640-8 Handle 1
6 8640-15 Sprocket, LH (972) 1
7 8640-11 Chain Anchor, Rear 2
8 8640-3 Bushing 2
9 8640-6 Mount Block 4
10 8640-5 Chain Anchor, Front 2
11 8640-13 Front Chain (19 Links) 2
12 8640-14 Sprocket, RH (973) 1
13 8640-9 Compression Spring (2-3/4) 1
14 8641-10 Extension Spring (6-1/4) 1
(48" Carrier Frame)
8643 52" Deck Height Adjuster Kit (Shown)
15 8643-8 Height Location Pin/Rope 1
16 8643-10 Height Locator Block 1
17 8643-2 Gas Spring 2
18 8643-1 Connecting Rod 2
19 8643-3 Shackle 8
20 8643-4 Chain (5 Links) 4
21 8643-5 Chain Anchor Bracket 4
22 8643-6 Chain Anchor Spacer 4
23 8643-7 Chain Anchor Doubler 4
8644 62" Deck Height Adjuster Kit
15 8643-8 Height Location Pin/Rope 1
16 8643-10 Height Locator Block 1
17 8643-2 Gas Spring 2
18 8643-1 Connecting Rod 2
19 8643-3 Shackle 8
20 8643-4 Chain (5 Links) 4
21 8643-5 Chain Anchor Bracket 4
22 8643-6 Chain Anchor Spacer 4
23 8643-7 Chain Anchor Doubler 4
NOTE: DML42A Mulching Deck uses the 48" Deck Height Adjuster
Kit (P/N 8641).
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
47
DECK HEIGHT ADJUSTER KIT
Refer to GHS42
DECK ASSEMBLY,
Page 14
Refer to DSD52
DECK ASSEMBLY,
Page 26
1
15
17 18
19
19
20
19 19
21
21
22
23
23
23
23
20
19 19
21
22
20
19 19
21
22
20
18 17
16
245
21
3
7
8
10
3
2
9
14
9
99
10
32
11
11
8
7
3
13
6
12
48
Use only genuine Walker® replacement parts. Effective Date 07-01-06
ITEM LOCATION LUBRICATION NO.
NO. TYPE PLACES ITEM LOCATION LUBRICATION NO.
NO. TYPE PLACES
LUBRICATION POINTS
36", 42", 48" & 56" Assemblies
1 Deck Caster Wheel Fork Pivot Grease 2
2 Blade Drive Gearbox Oil*2
3 Tee Gearbox, Deck Oil*1
4 Deck Caster Wheel Bearing Grease 2
5 Universal Joint Shaft Assembly Grease** 1
6 Pivot Assembly, Tilt-Up Deck Grease 4
7 Deck Support Arm Socket Grease 2
DSD52 & DSD62 Assemblies
1 Deck Caster Wheel Fork Pivot Grease 2
4 Deck Caster Wheel Bearing Grease 2
5 Universal Joint Shaft Assembly Grease** 2
6 Pivot Assembly, Tilt-Up Deck Grease 4
7 Deck Support Arm Socket Grease 2
8 Idler Arm, 2-Hole Grease 1
9 Blade Spindle Grease 3
10 Right Angle Gearbox Oil*** 1
11 Dolly Wheel Retract Oil 1
Lever and Linkage
12 Dolly Wheel Pivot Grease 1
DSD74 Assemblies
1 Deck Caster Wheel Fork Pivot Grease 2
2 Blade Drive Gearbox Oil*4
3 Tee Gearbox, Deck Oil*1
4 Deck Caster Wheel Bearing Grease 2
5 Universal Joint Shaft Assembly Grease** 1
6 Pivot Assembly, Tilt-Up Deck Grease 4
7 Deck Support Arm Socket Grease 2
14 Rear Deck Caster Wheel Axle Grease 2
*Gearboxes are permanently lubricated and sealed requiring
no scheduled lubrication. Oil level should be checked only
when an oil leak is noted.
** Grease every eight (8) hours.
*** Check oil level every 100 hours. Refer to OWNER’S
MANUAL for Lubrication Instructions.
NOTE: Exact location of some Lubrication Points may vary slightly
from those shown in the illustration. Decks shown in the
illustration are for reference only; for further information on
location of parts not shown here, refer to the parts listings
for individual Carrier Frames and Deck Assemblies.
49
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
LUBRICATION POINTS
DSD52 and
DSD62
Assemblies
9
611
127 510 76
1
9414
9
411232
4
5
8
67
7
6
36", 42", 48" and 56"
Assemblies
DSD74 Assembly
412222
341
5
6
7
67
14 14
50
ITEM DESCRIPTION
NO. ITEM DESCRIPTION
NO.
Use only genuine Walker® replacement parts. Effective Date 07-01-06
FASTENER LOCTITE® APPLICATION & TORQUE INSTRUCTIONS
Heavy Duty Gear Drive Assemblies DSD, DGHS, DML42A
Item # 1 applies to all Heavy Duty deck models EXCEPT DSD52
and DSD62.
1 Apply Loctite® Threadlocker # 277 (Red) to Item # 1 used
on Heavy Duty Gearbox Connector Tubes. Torque to 115
in-lb (34.7 N·m).
DGHS & DSD Deck Assemblies
Items # 2 & 3 apply to all deck models EXCEPT DSD52 and
DSD62.
2 Apply Loctite® Threadlocker # 242 (Blue) to P/N F211
(1/4-20 x 7/8 Hex Bolt, used on Gearbox Connector Tubes)
prior to assembly. Torque to 90 in-lb (10.2 N·m).
3 Torque P/N F018 (5/8-18 Hex Nut, used on underside of
blades) to 60 ft-lb (81.4 N·m). DO NOT apply Loctite®.
DSD52 & DSD62 Deck Assemblies
4 Apply Loctite® Threadlocker # 242 (Blue) to P/N F114
(5/16-18 x 5/8 SQH Set Screw, used on Drive Pulley) prior
to assembly. Torque to 190 in-lb (21.5 N·m).
5 Apply Loctite® Threadlocker # 242 (Blue) to P/N F076
(3/8-16 x 5/8 SQH Set Screw, used on U-Joint Shaft Assy,
T-Scope) prior to assembly. Torque to 400 in-lb (45.2 N·m).
6 Torque P/N F339 (5/16-18 x 3/4 Self-Tapping Bolt, used
on Mount Braket & PTO Guard) to 200 in-lb (22.6 N·m).
DO NOT apply Loctite®.
7 Apply Loctite® Threadlocker # 242 (Blue) to P/N F226
(5/16-18 x 7/8 Hex Bolt, used on Right Angle Gearbox)
prior to assembly. Torque to 18 ft-lb (24.4 N·m).
NOTE: Models DGHS48 and DSD52 are shown here. Refer to
individual deck assemblies for exact locations and quanti-
ties of items listed above.
51
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
FASTENER LOCTITE® APPLICATION & TORQUE INSTRUCTIONS
5
4
7
7
6
DSD52 & DSD62
Deck Assemblies
2
2
3
DGHS, DSD &
DML Deck Assemblies
Refer to Heavy Duty
Gear Drive Components
(GHS, SD and DML42A Models)
Refer to
Gear Drive Components
(GHS and SD Models)
1
1
52
DATE SERVICE ENGINE
ITEM HOURS
Use only genuine Walker® replacement parts. Effective Date 07-01-06
MAINTENANCE AND SERVICE RECORD SHEET
______________________________________________________________________________________________________________
______________________________________________________________________________________________________________
______________________________________________________________________________________________________________
______________________________________________________________________________________________________________
______________________________________________________________________________________________________________
______________________________________________________________________________________________________________
______________________________________________________________________________________________________________
______________________________________________________________________________________________________________
______________________________________________________________________________________________________________
______________________________________________________________________________________________________________
______________________________________________________________________________________________________________
______________________________________________________________________________________________________________
DECK / TRACTOR COMPATIBILITY CHART
MB MW MS
SD MS
GHS MC
SD MC
GHS MT
SD MT
GHS MTEFI
SD MTEFI
GHS MTL
SD MTL
GHS
MTL
EFI
GHS
MTL
EFI
SD
MD
SD MD
GHS
DGHS36 XXXXXX X
DSD36 XXX *X*X*X*X**XX*
DGHS42 XXXXXX X
DSD42 XXX *X*X*X*X**XX*
DML42A XXX X X *X*X*X** X*
DGHS48 XXXXX X
DSD48 XX X *X*X*X**XX*
DSD52 X*X*X**XX*
DSD56 XX X *X*X*X**XX*
DSD62 X*X*X**XX*
DSD74 ** * ** XXXXXXX*
X Deck and tractor are fully compatible.
*When using this deck on GHS tractors, installation of P/N 7541 (Blower Lockout Kit) is recommended.
Contact your Walker dealer.
** Using the DSD74 Deck with Model MT-20 is not recommended in all conditions. In certain conditions (tall, wet grass), the
performance of the deck may be marginal due to a limit of horsepower with the 20-hp engine.
53
LIMITED WARRANTY
FOR
WALKER
COMMERCIAL RIDER MOWER
1. WHAT THIS WARRANTY COVERS, AND FOR HOW LONG:
Walker Manufacturing company will, at its option, repair or replace, without charge, any part covered by this warranty which is found to
be defective in material and/or workmanship within one (1) year* after date of sale to the original retail purchaser unless the product is
used for rental purposes, in which case this warranty is limited to ninety (90) days. At Walker's request, customer will make the defec-
tive part available for inspection by Walker and/or return the defective part to Walker, transportation charges prepaid. All parts and
components of the Walker Mower are covered by this warranty except the following components which are warranted separately by
their respective manufacturers:
Kohler Engine
Kubota Engine
Kawasaki Engine
Eaton Hydraulic Transmission
Peerless Gearboxes
Battery
Tires
The available warranties covering these items are furnished with each mower. Walker does not assume any warranty obligation, lia-
bility or modification for these items, which are covered exclusively by the stated warranty of the respective manufacturers noted
above.
* An extended three (3) year warranty is offered on the Walker P/N 6200-9 Gear Axle Assembly.
2. WHAT THIS WARRANTY DOES NOT COVER:
A. This warranty does not cover defects caused by depreciation or damage caused by normal wear, accidents, improper
maintenance, improper use or abuse of the product, alterations, or failure to follow the instructions contained in the Owner’s
Manual for operation and maintenance.
B. The customer shall pay any charges for making service calls and/or for transporting the mower to and from the place where the
inspection and/or warranty work is performed.
3. HOW TO OBTAIN SERVICE UNDER THIS WARRANTY:
Warranty service can be arranged by contacting the dealer where you purchased the mower or by contacting Walker Manufacturing
Company, 5925 East Harmony Road, Ft. Collins, CO 80528. Proof of the date of purchase may be required to verify warranty cover-
age.
4. WARRANTY LIMITATION:
A. THERE IS NO OTHER EXPRESS WARRANTY. ANY WARRANTY THAT MAY BE IMPLIED FROM THIS PURCHASE
INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IS HEREBY LIMITED TO THE
DURATION OF THIS WARRANTY AND TO THE EXTENT PERMITTED BY LAW ANY AND ALL IMPLIED WARRANTIES
ARE EXCLUDED. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not
apply to you.
B. WALKER WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES AND/OR
EXPENSES IN CONNECTION WITH THE PURCHASE OR USE OF THE MOWER. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation(s) or exclusion(s) may not apply to you.
C. Only the warranty expressed in this limited warranty shall apply and no dealer, distributor, or individual is authorized to amend,
modify, or extend this warranty in any way. Accordingly, additional statements such as dealer advertising or presentations,
whether oral or written, do not constitute warranties by Walker, and should not be relied upon.
D. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
WALKER MFG. CO. • 5925 E. HARMONY ROAD, FORT COLLINS, CO 80528 • (970) 221-5614
FORM NO. 070106 PRINTED IN USA www.walkermowers.com ©2006 WALKER MFG. CO
TM

Navigation menu