Wanlida Group NS-CNV43 Car GPS with Bluetooth Hand-free User Manual 090814

Download:
Mirror Download [FCC.gov]
Document ID	1165397
Application ID	pY8F+Fr+O+kMK0JpEjtcAw==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.91kB (173914 bits)
Date Submitted	2009-09-07 00:00:00
Date Available	2009-09-07 00:00:00
Creation Date	2009-09-03 11:16:09
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2009-09-03 11:16:09
Document Title	Microsoft Word - user manual 090814.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	wonderic

Important Safety
Instructions
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE.
POWER SUPPLY:
Connect the supplied adapter to the side of the unit in the USB port. Plug the two-prong
end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug,
turn it over and reinsert it. If the unit will not the used for a long time, disconnect the plug
from the outlet.
NOTE:
Before plugging the power cord into an AC outlet, make sure that all the connections
have been made.
CAUTION: These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
Important Safety
Instructions
Refer to service manual for servicing instructions. To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or moisture.
NOTES
1)
Read these instructions.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
5)
Do not use this apparatus near water.
6)
Clean only with a damp cloth.
7)
Do not block any of the ventilation openings.
manufacturer's instructions.
8)
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9)
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Install in accordance with the
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of
time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
Important Safety
Instructions
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
Warning
Failure to avoid the following potentially hazardous situations may result in injury or
property damage.
The unit is designed to provide you with route suggestions. It does not reflect road
closures or road conditions, traffic congestion, weather conditions, or other factors that
may affect safety or timing while driving.
Use the unit only as a navigational aid. Do not attempt to use the unit for any purpose
requiring precise measurement of direction, distance, location, or topography. This
product should not be used to determine ground proximity for aircraft navigation.
CAUTION:
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
The batteries (or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.
Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the
Global Positioning System (“GPS”) hardware, operating software or other aspects of this
product. UL has only tested for fire, shock or casualty hazards as outlined in UL’s
Standard(s) for Safety [Note-Consider referencing specific UL standard].
UL Certification does not cover the performance or reliability of the GPS hardware and
GPS operating software.
UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS
WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY GPS
RELATED FUNCTIONS OF THIS PRODUCT.
Important Safety
Instructions
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1)
This device may not cause harmful interference.
(2)
This device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with limits for Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
1.
Reorient or relocate the receiving antenna.
2.
Increase the separation between the equipment and the receiver. Connect the
equipment into an outlet on a circuit different from that to which the receiver is
connected.
3.
Consult the dealer or an experience radio/TV technician for help.
The images in this manual are only for reference and they may be
different from the actual ones.
FCC Information:
Caution:
1. Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this equipment.
2. At least a 20 cm separation between the antenna and the user’s body
shall be maintained to meet FCC RF exposure requirement. The
transmitter must not be co-located or operated with any other antenna or
transmitter, except for the antenna or transmitter/module has been
certified by FCC under the configuration of this device..
Accessories List
The following items are included with your GPS unit.
ITEM
NAME
Car Adaptor
Mounting Bracket
Mounting Cradle
USB Cable
Micro SD Memory Card (with
Maping Data)
User Guide
Quick Start Guide
NOTE
The Micro SD Memory Card may be shipped installed in the GPS unit.
Accessories and their parts numbers are subject to modification without prior notice due
to improvements.
Contents
Important Safety Instructions
…………………………………..……..…..1
Accessories
……………………………….……….…....5
View of Main Unit
……………………………….………..…...7
System Connections
………………………………..…………....9
Power supply Preparation
……………………………….…….……11
Use of the Mount Accessories
…………………………….…….….…….12
Troubleshooting
……………………………….……….…..13
Specifications
…………………………….……………...15
View of Main Unit
1.
POWER Button
2.
Charge Indicator
Press for a longer time to turn the unit on or off.
LED lights red when your GPS is charging, green when it is fully charged.
3.
LCD Screen
4.
Volume Control
4.3 inch touch-sensitive screen. Touch with your fingertip.
Used to adjust the volume of the speaker.
5.
USB Port
6.
Reset Button
Press this button to reset the GPS.
Connect to the supplied car adapter to charge the unit.
7.
Microphone
Used in the Bluetooth handfree function.
The unit is designed with handfree via bluetooth function. Lets you use your GPS as
an in-vehicle hands-free device. Pair your Bluetooth enabled cell phone with your
GPS Bluetooth connection, and then use the GPS to receive calls while in your
vehicle.
View of Main Unit
8.
9.
Speaker
Micro SD Card & SIM Card Slot Cover
Open the cover, the Micro SD Card slot and SIM Card slot appear.
System
Connections

Always ensure that the unit and any other external device connected to the unit are
switched off and unplugged from the power supply before you attempt to connect
the unit to any external device
Installing the Micro SD Memory Card and an SIM Card
The unit is designed with micro SD and SIM Card slot which allows you to insert the
micro SD and SIM card into the GPS unit.
Working based on existing GPRS network, the unit installed with an SIM card can
receiving real-time text message sent by a fixed emitting source and display it on the
LCD screen.
Note: you should power off the unit when installing these cards.
Follow these steps:
1)
Slide the SIM Card Cover latch following arrow “OPEN” to open the SIM Card slot.
2)
Slide the Micro SD Card cover latch following arrow “OUT” to open the micro SD
Card slot.
3)
Insert the Micro SD Card into the micro SD Card slot with its gold contacts facing
down (the cut-off corner of the micro SD card should match the cut-off corner in the
slot).
4)
Gently slide the micro SD Card latch following the “IN” direction to lock it into place.
5)
Insert the SIM Card into the SIM Card slot, also with its gold contacts facing down.
6)
Gently slide the SIM Card latch following the “LOCK” direction to lock it into place.
System
Connections
10
Power Supply
Preparation
Using the Car Adaptor
The unit is supplied with a Car Adaptor for powering while in a vehicle.
Connect the Car Adaptor Power Plug to the unit’s USB charging port and plug the other
end to the vehicle’s 12-24V accessory cigarette socket, as shown below.
Attention:



Place the unit in a proper position for viewing.
Disconnect the unit from the Car Adaptor when starting the vehicle.
When connected with adaptor, the LCD screen will be brighter than when it's not
charging.
About the battery
Your GPS device comes with a built-in rechargeable battery. Charge the battery fully
before initial use. Charging time is normally about 3 hours. A fully charged battery
delivers about 2 hours of use.
11
Working conditions and precautions for the rechargeable battery

Battery should only be used and charged when temperatures are between
32-100F.

Maintain well-ventilated conditions around the product to avoid overheating. Don’t
Use
ofproduct
the onMounting
put the
a bed, sofa or anything that may block ventilation to the product.
Accessories

When
the battery is weak, an indication symbol will appear on the LCD screen and
the unit will power off automatically after a while.
When using the unit in vehicle, you can use the supplied mount accessories (mounting
bracket and mounting cradle) to mount the unit in the vehicle. Take the following steps to
operate:
1.
See Fig. 1, slide the mounting cradle onto the end of the mounting bracket to fix it.
2.
See Fig. 2. Set the bottom edge of the unit onto the mounting cradle. Then push the
tap at the top of the mounting cradle in arrow 1 direction to mount the unit to the
mounting cradle. To remove the unit, push the tap at the top of the mount cradle in
arrow 1 opposite direction.
Lift the suction cup lever and then press the suction cup to the windshield. Then
12
press down the suction cup lever in arrow 2 direction to fix the bracket to the
windshield.
At the end, rotate the knob to adjust the unit to proper position.
Warning:
Troubleshooting
The device must not be mounted so that it impairs the driver’s view of the road. Please
take extra precaution to ensure the airbags are not obstructed by the device.
Take steps described in the tables below to solve simple problems before contacting
customer service.
If you suspect something wrong with this unit, immediately turn the power off and
disconnect the power connector from the unit. Never try to repair the unit yourself
because it is dangerous to do so.
PROBLEM
Users can’t turn
the unit on.
POSSIBLE CAUSE
POSSIBLE SOLUTION
The adaptor doesn’t
connect well.
Connect the adaptor
correctly.
The built-in rechargeable
battery is weak.
Use the adaptor to supply
power or charge the
battery.
Unit will not
activate after
pressing and
holding the stand
by button when
connected to the
adaptor for
charging.
The unit had not been
used for a long time and
built-in battery was overly
discharged
Press Reset to turn the
unit on.
There is no sound.
The volume may be turned
down or mute.
Turn up the volume or
turn on the sound output.
13
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Dark screen.
The brightness may be
turned down.
Adjust the brightness of
the LCD.
The unit can’t
receive satellite
signals or can’t
orient.
The unit may be
obstructed by buildings or
metal block.
Make sure to use the unit
out of room.
Troubleshooting
PROBLEM
The unit can
receive signals
now but can’t then
or signals received
are not stable.
POSSIBLE CAUSE
POSSIBLE SOLUTION
The built-in rechargeable
battery is weak.
Use the adaptor to supply
power or charge the
battery.
The unit may be
obstructed by veil, such as
heat insulation paper.
Remove the veil.
Swing of the unit is too
great.
Avoid great swing of the
unit.
System software of the
unit fails to function after a
change.
Turn the unit on again.
Other possibilities:
Static or other external interference may cause the unit to function abnormally. In order to
recover normal status, please unplug the power supply cord and then plug it into the
outlet again to reset the unit. If the problems still exist, please cut off the power supply
and consult your service center or a qualified technician.
14
Specifications
TFT screen size
4.3 inches
Frequency Response
20Hz - 20kHz
Audio Signal-to-noise Rate
≥65dB
Audio distortion+noise
≤-20dB (1kHz)
Channel Separation
≥70dB (1kHz)
Dynamic Range
≥80dB (1kHz)
Power
DC 5V
Power Consumption
< 8W
Dimensions
121mmX82mmX19mm (L*W*D)
Weight
About 0.19Kg
15
Design and specifications are subject to change without notice.
16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : wonderic
Create Date                     : 2009:09:03 11:16:09+08:00
Modify Date                     : 2009:09:03 11:16:09+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - user manual 090814.doc
Creator                         : wonderic
Document ID                     : uuid:fda8bc59-7d8b-4289-93b7-33706982f7d4
Instance ID                     : uuid:cb8dba32-c93c-4c25-bb34-818d73e11d3b
Page Count                      : 16

EXIF Metadata provided by EXIF.tools