WatchGuard Technologies FS2E5W Wireless Access Point User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1613316
Application ID	+Cm1kno4g7Lce53ENVTqlg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	275.59kB (3444893 bits)
Date Submitted	2012-01-03 00:00:00
Date Available	2012-01-03 00:00:00
Creation Date	2011-08-15 09:39:36
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2011-10-12 10:12:16
Document Title	User Manual
Document Creator	Adobe InDesign CS4 (6.0)

Quick Start Guide
WatchGuard® XTM 33
WatchGuard® XTM 33 Wireless
Guide de démarrage rapide
Kurzanleitung
Guida introduttiva
Guía Rápida
WatchGuard® Technologies, Inc.
1
Next Steps
Connect your WatchGuard XTM 3 Series Device and Power it On
Internet
Eth 0
Eth 1
Router / DSL Modem
Congratulations! You have finished basic setup of your WatchGuard XTM device. You
can use the Web UI to continue basic configuration and management tasks. Before you
begin, we strongly recommend that you use the instructions below to upgrade your XTM
device to the latest Fireware XTM OS.
Download latest software
• Go to www.watchguard.com/archive/softwarecenter.asp
• Find and download the latest version of Fireware XTM OS.
Upgrade your XTM 3 Series device with latest Fireware XTM OS
• M
 ake sure your computer is configured to use DHCP. When you connect it to the XTM 3
Series device, make sure your computer gets an IP address on the 10.0.1.0/24 network.
Run the Web Setup Wizard
• Open a web browser and type https://10.0.1.1:8080 to start the Web Setup Wizard.
NOTE: Because the XTM device uses a self-signed certificate, you may see a certificate warning in your
browser. It is safe to ignore the warning (Internet Explorer) or to add a certificate exception (Mozilla Firefox).
• On
 the computer you use to connect to the XTM device, find and run the Fireware XTM
OS installation package you downloaded from the WatchGuard web site.
• Connect to your XTM device with the Fireware XTM Web UI using the user name admin
and the passphrase you set in the wizard.
• Select System > Upgrade OS.
NOTE: The default location for the upgrade file is C:\Program Files\Common Files\WatchGuard\resources\
FirewareXTM\[version number\model]. The file name is xtm3_aa.sysa-dl.
About WatchGuard System Manager (WSM)
To extend the feature set and management capabilities of your XTM 3 Series device, you
can download and install WatchGuard System Manager client and server software tools.
WSM is available to you at no additional cost. It gives you access to additional features
for your device:
• L og in with the user name admin and the passphrase readwrite.
• Follow the instructions on the screen and complete the Wizard.
NOTE: Your WatchGuard XTM device now has a basic configuration that allows outbound TCP, UDP, and ping
traffic, and blocks all unrequested traffic from the external network.
• L og in to the Fireware XTM Web UI with the user name admin and the configuration
passphrase you set in the Wizard.
• Flexible,

on- or off-line configuration editing with Policy Manager
• A full suite of monitoring tools for your XTM device
• WatchGuard Server Center
- Log and Report Server - Use together with WSM for full-featured logging and
reporting options
- Quarantine Server - Use with spamBlocker to collect and isolate spam email
- WebBlocker Server - Configure a local WebBlocker Server to control web site access
- Management Server - Manage multiple Firebox and XTM devices from one UI
To download the latest WatchGuard System Manager (WSM) software, go to
www.watchguard.com/archive/softwarecenter.asp.
For more information about how to configure your WatchGuard XTM 3 Series device, go
to www.watchguard.com/help/documentation and open the current help system.
English
Getting Started
Eth 0
Eth 1
/ 调制解调器
Guide de démarrage rapide
Étapes suivantes
Connectez votre appareil WatchGuard XTM 3 Series et allumez-le
Internet
Eth 1
Routeur/modem DSL
• Assurez-vous que votre ordinateur est configuré de façon à utiliser DHCP. Lors de la
connexion de votre appareil XTM 3 Series, vérifiez que votre ordinateur dispose d’une
adresse IP sur le réseau 10.0.1.0/24.
Lancez l’assistant d’installation Web
• O
 uvrez un navigateur Internet et tapez https://10.0.1.1:8080 pour démarrer l’assistant
d’installation Web.
REMARQUE : comme l’appareil XTM utilise un certificat auto-signé, un avertissement sur ce certificat peut
s’afficher dans votre navigateur. Vous pouvez ignorer cet avertissement (Internet Explorer) ou ajouter une
exception (Mozilla Firefox).
Téléchargez les derniers logiciels
• Allez sur https://www.watchguard.com/archive/softwarecenter.asp.
• Téléchargez la dernière version du système d’exploitation Fireware XTM et du logiciel WSM.
Mettez à jour votre appareil XTM 3 Series avec le système
d’exploitation Fireware XTM le plus récent.
• Lancez,

sur l’ordinateur sur lequel est branché votre appareil XTM, le package
d’installation du système d’exploitation Fireware XTM que vous avez téléchargé depuis
le site Internet de WatchGuard.
• Connectez-vous à votre appareil XTM avec l’interface utilisateur Web du Fireware XTM avec
le nom d’utilisateur « admin » et le mot de passe de configuration entré lors de l’installation.
• Sélectionnez  System > Upgrade OS.
REMARQUE : l’emplacement par défaut du fichier de mise à jour est C:\Program Files\Common Files\
WatchGuard\resources\FirewareXTM\[numéro de la version\modèle]. Le nom du fichier est xtm3_aa.sysa-dl.
À propos de WatchGuard System Manager (WSM)
Pour accroître les fonctions et les capacités de gestion de votre appareil XTM 3 Series,
vous pouvez télécharger et installer le client WatchGuard System Manager et les outils
logiciels des serveurs. WSM est disponible sans supplément de prix. Il vous donne accès à
des fonctions additionnelles pour votre appareil :
• C
 onnectez-vous avec le nom d’utilisateur « admin » et le mot de passe « readwrite ».
• Suivez les instructions affichées à l’écran et terminez l’assistant.
REMARQUE : votre appareil WatchGuard XTM dispose maintenant d’une configuration de base autorisant
tout le trafic sortant TCP, UDP et ping, et bloque tout le trafic indésirable du réseau externe.
• C
 onnectez-vous à l’interface utilisateur Web du Fireware XTM en utilisant le nom
d’utilisateur « admin » et le mot de passe de configuration entré lors de l’installation.
• Modification flexible de la configuration en ligne ou hors ligne avec Policy Manager
• Série complète d’outils de contrôle pour votre appareil XTM
• Centre de serveurs WatchGuard
- Serveur pour la  production de journaux : à utiliser avec WSM pour avoir toutes les
options de production de journaux et de rapports
- Serveur de mise en quarantaine : à utiliser avec spamBlocker pour recueillir et isoler
le spam
- Serveur WebBlocker : configurez un serveur WebBlocker local afin de contrôler
l’accès aux sites Internet
- Serveur de gestion : gère de multiples appareils Firebox et XTM à partir d’une seule
interface utilisateur
Pour télécharger le tout dernier logiciel WatchGuard System Manager (WSM), rendezvous sur www.watchguard.com/archive/softwarecenter.asp.
Pour de plus amples informations sur la façon de configurer votre appareil WatchGuard
XTM 3 Series, rendez-vous sur www.watchguard.com/help/documentation et ouvrez le
système d’aide.
Français
Eth 0
Bravo ! L’installation de base de votre appareil WatchGuard XTM est terminée. Vous
pouvez maintenant utiliser l’interface utilisateur Web pour poursuivre les tâches de
configuration et de gestion. Avant de démarrer, nous vous recommandons fortement de
suivre les instructions indiquées ci-dessous pour mettre à jour votre appareil XTM avec le
système d’exploitation Fireware XTM le plus récent.
Kurzanleitung
Weitere Schritte
Anschließen/Starten Ihrer XTM 3 Series Appliance
Herzlichen Glückwunsch! Das Setup für Ihr WatchGuard-XTM-Gerät ist abgeschlossen.
Weitere Konfigurations- und Verwaltungsaufgaben können Sie über die Webschnittstelle
erledigen. Bevor Sie beginnen, führen Sie mit Hilfe der Anweisungen auf dieser Seite
zunächst ein Upgrade Ihrer Appliance auf das aktuelle Fireware-XTM-Betriebssystem durch.
Internet
Eth 0
• Gehen Sie zu www.watchguard.com/archive/softwarecenter.asp.
• Laden Sie von dort die aktuellen Softwareversionen für Fireware XTM und den WSM herunter.
Router / DSL Modem
• I hr PC muss auf die Verwendung von DHCP konfiguriert sein, um bei der Verbindung zur
XTM 3 Series Appliance eine IP-Adresse vom 10.0.1.0/24-Netzwerk beziehen zu können.
Ausführen des Installationsassistenten
• Öffnen Sie Ihren Webbrowser. Geben Sie als URL https://10.0.1.1:8080 ein, um den
Installationsassistenten zu starten.
HINWEIS: Da die XTM Appliance ein selbstsigniertes Zertifikat benutzt, kann es sein, dass der Browser eine
Warnmeldung anzeigt. Beim Internet Explorer können Sie diese ignorieren, bei Mozilla Firefox müssen Sie
eine Ausnahme hinzufügen.
• M
 elden Sie sich mit dem Benutzernamen admin und der Passphrase readwrite an.
• Folgen Sie den Bildschirmanweisungen, um die Installation abzuschließen.
HINWEIS: Ihre WatchGuard XTM Appliance ist jetzt so konfiguriert, dass sie abgehenden TCP-, UDP- und PingVerkehr zulässt und unerwünschte Daten von externen Netzwerken blockiert.
• Melden Sie sich mit dem Benutzernamen admin und der konfigurierten Passphrase bei
    der Fireware-XTM-Webschnittstelle an.
Upgrade Ihrer XTM 3 Series auf das aktuelle Fireware-XTM-Betriebssystem
• Führen

Sie auf dem für die XTM Appliance zu verwendenden PC das Fireware-XTMInstallationspaket aus, das Sie von der WatchGuard-Website heruntergeladen haben.
• Stellen Sie über die Fireware-XTM-Webschnittstelle mit dem Benutzernamen admin
und der konfigurierten Passphrase eine Verbindung zu Ihrer XTM Appliance her.
• Wählen Sie dann System > Upgrade OS.
HINWEIS: Die Upgrade-Datei xtm3_aa.sysa-dl finden Sie im Standardverzeichnis C:\Programme\
Gemeinsame Dateien\WatchGuard\resources\FirewareXTM\[Version\Modell].
Über den WatchGuard System Manager (WSM)
Um sich kostenlos zusätzliche Funktionen und Verwaltungsoptionen für Ihr XTM 3 Series
Gerät zu sichern, laden Sie den WatchGuard System Manager Client sowie die ServerSoftware-Tools herunter und installieren Sie sie. Sie erhalten dadurch:
• Flexible Online-/Offline-Konfiguration mit dem Policy Manager
• Eine vollständige Suite mit Überwachungstools
• WatchGuard Server Center
- Log- und Report-Server – umfassende Protokollierungs- und Reporting-Funktionen
mit dem WSM
- Quarantäne-Server – zur Erkennung und Isolierung von Malware mit spamBlocker
- WebBlocker-Server – zur Konfiguration eines lokalen WebBlocker-Servers für die
Überwachung des Internetzugangs
- Management-Server – zur Verwaltung mehrerer Firebox- und XTM-ApplianceFunktionen über eine Schnittstelle
Die aktuelle Software für den WatchGuard System Manager (WSM) können Sie unter
www.watchguard.com/archive/softwarecenter.asp herunterladen.
Weitere Infos zur Konfiguration Ihrer WatchGuard XTM 3 Series Appliance finden Sie im
aktuellen Hilfe-System unter www.watchguard.com/help/documentation.
Deutsch
Eth 1
Download aktueller Software
Guida introduttiva
Passaggi successivi
Collegare e accendere WatchGuard XTM 3 Series
Congratulazioni! La configurazione di base del dispositivo WatchGuard XTM 3 è
completata. È ora possibile utilizzare l’interfaccia Web per le altre attività di configurazione
e gestione di base. Prima di iniziare, raccomandiamo di seguire le istruzioni di seguito per
aggiornare il dispositivo XTM al più recente sistema operativo Fireware XTM.
Internet
Eth 0
Eth 1
Router / DSL Modem
• A
 ssicurarsi che il computer sia configurato per utilizzare DHCP. Quando si esegue il
collegamento al dispositivo XTM 3 Series, assicurarsi che il computer utilizzato ottenga
un indirizzo IP sulla rete 10.0.1.0/24.
Eseguire la configurazione guidata Web
• A
 prire un browser Web e digitare https://10.0.1.1:8080 per avviare la configurazione
guidata Web.
• E seguire l’accesso con il nome utente admin e la password readwrite.
• Seguire le istruzioni visualizzate e completare la procedura guidata.
NOTA: il dispositivo WatchGuard XTM dispone ora di una configurazione di base che consente il traffico TCP,
UDP e ping in uscita e blocca tutto il traffico non richiesto dalla rete esterna.
• E seguire l’accesso all’interfaccia Web di Fireware XTM utilizzando il nome utente admin
e la password di configurazione impostata durante la procedura guidata.
• Visitare

www.watchguard.com/archive/softwarecenter.asp.
• Individuare e scaricare la versione più recente del sistema operativo Fireware XTM e il
software WSM.
Aggiornare il dispositivo XTM 3 Series all’ultimo sistema operativo
Fireware XTM
• Sul
 computer utilizzato per connettersi al dispositivo XTM, individuare ed eseguire il pacchetto
di installazione del sistema operativo Fireware XTM scaricato dal sito Web di WatchGuard.
• Connettere il dispositivo XTM con l’interfaccia Web di Fireware XTM utilizzando il nome
utente admin e la password impostata nella configurazione guidata.
• Selezionare System > Upgrade OS (Sistema > Aggiorna OS).
NOTA: il percorso predefinito del file di aggiornamento è  C:\Program Files\Common Files\WatchGuard\
resources\FirewareXTM\[numero versione\modello]. Il nome file è xtm3_aa.sysa-dl.
Informazioni su WatchGuard System Manager (WSM)
Sul computer utilizzato per connettersi al dispositivo XTM, individuare ed eseguire il
pacchetto di installazione del sistema operativo Fireware XTM scaricato dal sito Web di
WatchGuard. Per i requisiti di sistema minimi di WSM, vedere le note di rilascio del prodotto.
Per estendere il set di funzioni e le funzionalità di gestione del dispositivo XTM 3 Series,
è possibile scaricare e installare gli strumenti software server e client di WatchGuard
System Manager. WSM è disponibile senza alcun costo aggiuntivo e fornisce accesso a
funzionalità aggiuntive del dispositivo.
• Flessibile modifica della configurazione online/offline con Policy Manager
• Una suite completa di strumenti di monitoraggio per il dispositivo XTM
• WatchGuard Server Center
- Log and Report Server – Utilizzare con WSM per opzioni complete di logging e reporting
- Quarantine Server – Utilizzare con spamBlocker per raccogliere e isolare i messaggi
email di spamming
- WebBlocker Server – Configurare un WebBlocker Server locale per controllare
l’accesso ai siti Web
- Management Server – È possibile gestire più dispositivi Firebox e XTM da una
singola interfaccia
Per scaricare il software WatchGuard System Manager (WSM) più recente, visitare www.
watchguard.com/archive/softwarecenter.asp.
Per ulteriori informazioni sulla modalità di configurazione di WatchGuard XTM 3 Series,
visitare www.watchguard.com/help/documentation e aprire la guida.
Italiano
NOTA: il dispositivo XTM utilizza un certificato self-signed, il browser può pertanto visualizzare un avviso
di certificato. Ignorare l’avviso (Internet Explorer) oppure aggiungere un’eccezione di certificato (Mozilla
Firefox).
Scaricare il software più aggiornato
Eth 0
Eth 1
/ DSL Modem
Eth 0
Eth 1
Router / DSL Modem
Para Comenzar
Pasos Siguientes
Conectar el dispositivo WatchGuard XTM Serie 3 y encenderlo
Internet
Eth 0
Eth 1
Router / Módem DSL
¡Felicitaciones! Usted ha finalizado la configuración básica de su dispositivo WatchGuard
XTM. Ahora puede usar la interfaz Web para continuar la configuración básica y las tareas
de administración. Antes de empezar, le recomendamos enfáticamente que utilice las
instrucciones que siguen para actualizar su dispositivo XTM con el último Fireware XTM OS.
Descargue el último software
• Vaya a www.watchguard.com/archive/softwarecenter.asp
• Encuentre y descargue la última versión del software Fireware XTM OS y WSM.
Actualice su dispositivo XTM 3 Series con el último Fireware XTM OS
Ejecute el Web Setup Wizard
• En
 la computadora que usa para conectarse al dispositivo XTM, encuentre y ejecute el
paquete de instalación del Fireware XTM OS que descargó del sitio de WatchGuard.
• Conéctese con su dispositivo XTM con la interfaz Web de usuario del Fireware XTM
usando el nombre admin y la contraseña que puso en el Wizard.
• Seleccione System > Upgrade OS.
• A
 bra una ventana en el navegador y escriba https://10.0.1.1:8080 para iniciar el Web
Setup Wizard.
NOTA: la ubicación por defecto para el archivo de actualización es: C:\Archivos de Programa\Archivos
Comunes\WatchGuard\Recursos\FirewareXTM\[número de versión\modelo]. El nombre del archivo es
xtm3_aa.sysa-dl.
• A
 segúrese de que su computadora esté configurada para usar DHCP. Cuando la conecte al
dispositivo XTM 3 Series, asegúrese de que obtenga una dirección IP sobre la red 10.0.1.0/24.
NOTA: Dado que el dispositivo XTM usa un certificado auto firmado, usted puede ver una advertencia sobre el
certificado en su navegador. Es seguro ignorarla (en Internet Explorer) o añadir una excepción de certificado (en
Mozilla Firefox).
• L oguéese con el nombre de usuario admin y la contraseña readwrite.
• Siga las instrucciones en pantalla y complete el Wizard.
NOTA: Su dispositivo WatchGuard XTM ahora tiene una configuración básica que permite tráfico TCP y UDP
saliente, así como ping, y bloquea todo el tráfico no solicitado de la red externa.
• Loguéese en la interfaz de usuario del Fireware XTM usando el nombre admin y la
contraseña de configuración que puso en el Wizard.
Acerca del WatchGuard System Manager (WSM)
Para extender el conjunto de de características y capacidades de administración de su
dispositivo XTM 3 Series, usted puede descargar e instalar el cliente WatchGuard System
Manager y las herramientas de software de servidor. WSM está disponible para usted sin
costo añadido. Le brinda acceso a características adicionales para su dispositivo:
• Edición flexible, on y off-line de la configuración con Policy Manager
• Una suite completa de herramientas de monitorie para su dispositivo XTM
• WatchGuard Server Center
- Log and Report Server – Úselo junto con el WSM para tener opciones completas de 	
registros y reportes
- Quarantine Server – Úselo con spamBlocker para recolectar y aislar el correo 		
electrónico con spam
- WebBlocker Server – Configure un WebBlocker Server local para controlar el acceso 	
a sitios web
- Management Server – Administre múltiples dispositivos Firebox y XTM desde una 		
sola interfaz de usuario
Para descargar el último software WatchGuard System Manager (WSM), vaya a
www.watchguard.com/archive/softwarecenter.asp.
Para más información sobre cómo configurar su dispositivo WatchGuard XTM 3 Series,
vaya a www.watchguard.com/help/documentation y abra el sistema de ayuda vigente.
WatchGuard® XTM 3 Series Quick Start Guide
WatchGuard® XTM 3 Series Quick Start Guide
WATCHGUARD TECHNICAL SUPPORT
1.877.232.3531		
(U.S. and Canada)		
+1.206.613.0456		
(all other countries)		
www.watchguard.com/support
ADDRESS: 505 Fifth Avenue South, Suite 500, Seattle, WA 98104
WEB: www.watchguard.com  •  U.S. SALES: 1.800.734.9905  •  INTERNATIONAL SALES: +1.206.613.0895
© 2011 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Firebox, Fireware,
Core, Peak, and LiveSecurity are either trademarks or registered trademarks of WatchGuard Technologies, Inc.
in the United States and/or other countries. All other trademarks and tradenames are the property of their
respective owners. P.N. 352-4132-001 Rev
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-21:37:19
Instance ID                     : uuid:4136ac9c-5ee1-d94c-9cab-b23c89278d94
Document ID                     : xmp.did:0480117407206811B8B18FCE7ABC9212
Original Document ID            : adobe:docid:indd:65ce3074-aaa7-11de-b397-ad131245b430
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:0380117407206811B8B18FCE7ABC9212
Derived From Document ID        : xmp.did:0280117407206811B8B18FCE7ABC9212
Derived From Original Document ID: adobe:docid:indd:65ce3074-aaa7-11de-b397-ad131245b430
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:01801174072068118EF1CC56768496A3, xmp.iid:02801174072068118EF1CC56768496A3, xmp.iid:03801174072068118EF1CC56768496A3, xmp.iid:04801174072068118EF1CC56768496A3, xmp.iid:05801174072068118EF1CC56768496A3, xmp.iid:06801174072068118EF1CC56768496A3, xmp.iid:07801174072068118EF1CC56768496A3, xmp.iid:08801174072068118EF1CC56768496A3, xmp.iid:018011740720681197A5BC2FC6E41702, xmp.iid:028011740720681197A5BC2FC6E41702, xmp.iid:0180117407206811B8B18FCE7ABC9212, xmp.iid:0280117407206811B8B18FCE7ABC9212, xmp.iid:0380117407206811B8B18FCE7ABC9212, xmp.iid:0480117407206811B8B18FCE7ABC9212, xmp.iid:0780117407206811B8B18FCE7ABC9212, xmp.iid:0880117407206811B8B18FCE7ABC9212, xmp.iid:083F58A40F206811B8B18FCE7ABC9212, xmp.iid:093F58A40F206811B8B18FCE7ABC9212, xmp.iid:0A3F58A40F206811B8B18FCE7ABC9212, xmp.iid:0080117407206811AB08D1CFB0E32A34, xmp.iid:72454AD84B206811AB08D1CFB0E32A34, xmp.iid:F77F11740720681195FEF1F33F393AB4, xmp.iid:02801174072068118B6C9C3592179745, xmp.iid:F77F1174072068119AD9AB7DACF93D65, xmp.iid:F87F1174072068119AD9AB7DACF93D65, xmp.iid:F97F1174072068119AD9AB7DACF93D65, xmp.iid:A2E700292C206811B699AD0AEECD26C5, xmp.iid:08801174072068118FFDBFCEB710638A, xmp.iid:0780117407206811AE71FBA0C46B53B2, xmp.iid:0880117407206811AE71FBA0C46B53B2, xmp.iid:0980117407206811AE71FBA0C46B53B2, xmp.iid:0A80117407206811AE71FBA0C46B53B2, xmp.iid:12CBAF1F1A206811AE71FBA0C46B53B2, xmp.iid:6084F3DB35206811AF27E21D1F526C04, xmp.iid:6184F3DB35206811AF27E21D1F526C04, xmp.iid:6284F3DB35206811AF27E21D1F526C04, xmp.iid:6384F3DB35206811AF27E21D1F526C04, xmp.iid:6484F3DB35206811AF27E21D1F526C04, xmp.iid:6584F3DB35206811AF27E21D1F526C04, xmp.iid:6684F3DB35206811AF27E21D1F526C04, xmp.iid:0280117407206811965E81955A28A951, xmp.iid:0380117407206811965E81955A28A951, xmp.iid:0480117407206811965E81955A28A951, xmp.iid:0580117407206811965E81955A28A951, xmp.iid:F77F117407206811994CAB7CC900706F
History When                    : 2009:11:22 17:26:37-08:00, 2009:11:22 17:26:37-08:00, 2009:11:22 17:37:36-08:00, 2009:11:22 19:36:38-08:00, 2009:11:22 19:37:33-08:00, 2009:11:22 19:37:33-08:00, 2009:11:22 21:20:27-08:00, 2009:11:23 08:17:40-08:00, 2009:11:25 09:58:26-08:00, 2009:11:25 09:58:26-08:00, 2009:11:29 21:26:39-08:00, 2009:11:29 21:26:39-08:00, 2009:11:29 21:26:56-08:00, 2009:11:29 21:26:56-08:00, 2009:11:29 22:17:41-08:00, 2009:11:29 22:23:29-08:00, 2009:11:29 22:30:09-08:00, 2009:11:29 22:38:04-08:00, 2009:11:29 22:45:13-08:00, 2009:12:10 14:16:24-08:00, 2009:12:10 16:57:38-08:00, 2010:01:19 21:34:44-08:00, 2010:02:07 21:49:42-08:00, 2010:08:02 12:55:36-07:00, 2010:08:02 12:56:47-07:00, 2010:08:02 13:00:21-07:00, 2010:11:24 15:09:28-08:00, 2010:12:06 14:30:41-08:00, 2011:07:06 14:19:11-07:00, 2011:07:06 14:48:38-07:00, 2011:07:06 14:56:28-07:00, 2011:07:06 15:04:48-07:00, 2011:07:06 15:11:30-07:00, 2011:07:11 16:35:37-07:00, 2011:07:11 16:36:07-07:00, 2011:07:11 16:36:23-07:00, 2011:07:11 16:36:48-07:00, 2011:07:11 16:40:31-07:00, 2011:07:11 16:41:17-07:00, 2011:07:11 17:00:45-07:00, 2011:08:10 15:53:56-07:00, 2011:08:10 15:54:26-07:00, 2011:08:10 15:59:45-07:00, 2011:08:10 16:22:40-07:00, 2011:08:15 09:39:06-07:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /metadata, /, /, /, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00
Manifest Placed Y Resolution    : 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : xmp.iid:80BE2181302068118F2E98142CC34A33, uuid:0C40F2809862E01199C1943F182E5451, uuid:0856971EAE2111DC84F0E484D22EFEC9, uuid:08569718AE2111DC84F0E484D22EFEC9, xmp.iid:25CB5DEA14206811A163EDC5270B179D, xmp.iid:20CB5DEA14206811A163EDC5270B179D, xmp.iid:26CB5DEA14206811A163EDC5270B179D, uuid:17488BE7AE2111DC84F0E484D22EFEC9, uuid:F7A6B7D4AF0B11DCA62BC316D0DD9377, xmp.iid:4D06A6241820681181A2C4EFA6771237, uuid:363E8294991EDE11AE31ECFCE9D93A35, uuid:BE65FE3BBE1EDE11AE31ECFCE9D93A35, uuid:363E8294991EDE11AE31ECFCE9D93A35, uuid:BE65FE3BBE1EDE11AE31ECFCE9D93A35, uuid:363E8294991EDE11AE31ECFCE9D93A35, uuid:BE65FE3BBE1EDE11AE31ECFCE9D93A35, uuid:363E8294991EDE11AE31ECFCE9D93A35, uuid:BE65FE3BBE1EDE11AE31ECFCE9D93A35, uuid:363E8294991EDE11AE31ECFCE9D93A35, uuid:BE65FE3BBE1EDE11AE31ECFCE9D93A35, uuid:363E8294991EDE11AE31ECFCE9D93A35, uuid:BE65FE3BBE1EDE11AE31ECFCE9D93A35, uuid:363E8294991EDE11AE31ECFCE9D93A35, uuid:BE65FE3BBE1EDE11AE31ECFCE9D93A35, uuid:363E8294991EDE11AE31ECFCE9D93A35, uuid:BE65FE3BBE1EDE11AE31ECFCE9D93A35
Manifest Reference Document ID  : uuid:41C46F4BCE0A11DDA66895840F2599D9, uuid:7E6F1DB09762E01199C1943F182E5451, uuid:560ACF21AE1F11DC84F0E484D22EFEC9, uuid:770787BCAE1F11DC84F0E484D22EFEC9, uuid:FAC62425993F11DEAE2DAED8534749A3, uuid:D8E11BCA994111DEAE2DAED8534749A3, uuid:D0BE0BE2994911DEAE2DAED8534749A3, uuid:CFE41341AE1E11DC84F0E484D22EFEC9, uuid:F7A6B7D3AF0B11DCA62BC316D0DD9377, uuid:E27AAF29A9C311DEB44388BB880596DE, uuid:69B3A5CC971EDE1197B694730B88EE41, uuid:BD65FE3BBE1EDE11AE31ECFCE9D93A35, uuid:69B3A5CC971EDE1197B694730B88EE41, uuid:BD65FE3BBE1EDE11AE31ECFCE9D93A35, uuid:69B3A5CC971EDE1197B694730B88EE41, uuid:BD65FE3BBE1EDE11AE31ECFCE9D93A35, uuid:69B3A5CC971EDE1197B694730B88EE41, uuid:BD65FE3BBE1EDE11AE31ECFCE9D93A35, uuid:69B3A5CC971EDE1197B694730B88EE41, uuid:BD65FE3BBE1EDE11AE31ECFCE9D93A35, uuid:69B3A5CC971EDE1197B694730B88EE41, uuid:BD65FE3BBE1EDE11AE31ECFCE9D93A35, uuid:69B3A5CC971EDE1197B694730B88EE41, uuid:BD65FE3BBE1EDE11AE31ECFCE9D93A35, uuid:69B3A5CC971EDE1197B694730B88EE41, uuid:BD65FE3BBE1EDE11AE31ECFCE9D93A35
Create Date                     : 2011:08:15 09:39:36-07:00
Modify Date                     : 2011:10:12 10:12:16-07:00
Metadata Date                   : 2011:10:12 10:12:16-07:00
Creator Tool                    : Adobe InDesign CS4 (6.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 10528 bytes, use -b option to extract)
Doc Change Count                : 346
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Count                      : 11
Creator                         : Adobe InDesign CS4 (6.0)

EXIF Metadata provided by EXIF.tools