| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1410740 |
| Application ID | eeRRPDHzFEU2wUU3xlmD7A== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 257.26kB (3215762 bits) |
| Date Submitted | 2011-01-28 00:00:00 |
| Date Available | 2011-03-14 00:00:00 |
| Creation Date | 0000-00-00 00:00:00 |
| Producing Software | Adobe PDF Library 1.0 |
| Document Lastmod | 2011-01-27 12:30:49 |
| Document Title | Users Manual |
1541 WHVE-TEK
WM150 RFID Module
Hardware Datasheet
235 éjt‘l’i‘i’iflfi‘i’iflfi 903K ISfizZ
Te\:+886-2-2228-9111 amass-242217751
15F-z., No.903, Jhungjheng Rd., handle City, Taipei County 235, Taiwan (R.O.C.)
$WFIVE-TEK aaamaafiufia} a
Product Overview
1. 1 General Description
The “111150 is a “F RFID read/write module for use with industry standard 13. 56111112 RFID
tags and smart labels. The 11111150 supports 15014443A/B, 1S015693, 15018000f3 modefl
standard protocoll The device can be to a PC or other host system easily The built
in bootfloader enables firmware field upgrades.
l. 2 Technical Specifications:
13. 50111112 i7l\'llz
1S0144431\/B‘ 1S015693, 1801800073 modefl‘
NKP Mifare (S50/570) 8; SOVY Feliea Card 1110 Only
Integrated
USB or UART
2 LED (Green 2 active, Red 2 reading)
Up to 30mm
(depend on the transponder and reader antenna size)
\'DC +5V NXP Mifare Ultrilight
<> NXP 550/570 Ull) Only
Support 15014443
ST SR14K
ST SR1X4'
1\tmel ATBSRFUZU
1\tmel ATBSSC3210CRF
18015693
NXP lfCO E SL1
Tagfit 113—1 Standard
Tagfit 113—1 Pro
Tag t —1 Plus
Fujitsu TerVIDm family MB89R118
Fujitsu TerVIDm family MB89R119
M5tar M5 3200 Lyra
MWlEO Re\f*3.l Hardware Datasheet 2011/01/26 Ver. 142 page 1
rflmeE-TEK fi Efi H 5 HQ 19} 15 BF: 1} a]
2. Dimensions Description
2. 1 Dimensions
Unirsi mm
Tolerance 3 to. 3
Rad'us: 1 (mm)
,25.7 (mm)
4(m)
Radius: 1 (mm)
G" 2, 4. 2 (mm)
"_30 (mm)
1 (mm)
if; WFIVE-TEK
FCC ID : Y4V-WM150
{3
:1>
WM150 F0
SIN 1000001
v Elev—3.1
lop Layer Bottom Layer
11111150 Re\*3.1 Hardware Denasheet 2011/01/26 Ver. 1? page 2
r’QIWHVE-TEK a; at a a a a e BR a} a
3.Host Interface
USB Specification 2.[) compliant; fullespeed (12Mbps) data rates
OR
UlRT
Baud Rates: 115200 bits/sec, N, 8, 1
ps. l\o Parity BIL 8 Data Bits. 1 Stop Bit,
4.1nterface Connector Pin Define
Top Lager
Pinfl Gnd Digital Ground
VDC +51: Digital Power Supply
UART Serial Data lnput (TTL Level)
UART Serial Data Output (TTL Level)
Reserved for future use
Digital Ground
VBus Power USB Digital Power Supply (VDC +5V)
USB De Data Line
USB D+ Data Line
Digital Ground
Green Device Link Success
Red Device Link Read TM} Success
M\1150 Re\*3.1 Hardware Datasheet 2011/01/26 Yer. 112 page 3
chWHVE-TEK 11211351 514 15 HQ m 75 BF: a a
5. Block Diagram
13. 50111112 Crystal
llost Device
USB (‘ah I e
Host Interface
MCU & Rl‘ Control Chip
Note 2
The buyer of the module who will incorportate this module into his host must submit
the final product to the manufacturer or the module, and the ll:\\1L1FlC'l‘URER 01‘ T1112
MODULE WILL VERIFY that the product is incorporated in the host equipment in a way
that is represented by the testing as shown in the test report,
11111150 Rev311 Hardware Datasheet 2011/01/07 Yer. 111 page 11
4'WHVE-TEK a at a a a a a m a a
To OEM installer:
11 FCC 1D label on the final system must be labeled with ” Contains FCC llD: Y4V—Wll50”
or ” Contains transmitter module FCC 1D: 1141141111150
Z [n the user manual, final system integrator must ensure that there is no instruction
provided in the user manual to install or remove the transmitter module
3, Transmitter module must be installed and used in strict accordance with the
manufacturer is instructions as descrihed in the user documentation that comes with
the product.
The user manual of the final host system must contain the following statements:
USilfFederal Conmiunication Commission (FCC):
This deVice complies With Part 15 of the FCC Rules. Operation is SUlJJCCt to the
fol lowing two conditions: (1) this device may not cause harmful interference. and (2)
this device must accept any interference received, including interference that may
cause undes1red operation,
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’ 5 authority to operate the equipment.
To comply with the FCC R1” exposure compliance requirements this deVice and its antenna
must not he c
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.2
Linearized : No
Modify Date : 2011:01:27 12:30:49
Producer : Adobe PDF Library 1.0
Page Count : 7
EXIF Metadata provided by EXIF.tools