Wavenet Technology BM28001 Wireless OEM Modem Module User Manual 2 6

Download:
Mirror Download [FCC.gov]
Document ID	284523
Application ID	t+rZ6qyRrcst1AFN9oHVRw==
Document Description	crn24348 compliance
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.63kB (20349 bits)
Date Submitted	2002-11-20 00:00:00
Date Available	2002-12-02 00:00:00
Creation Date	2002-11-20 14:38:23
Producing Software	Acrobat PDFWriter 4.05 for Windows
Document Lastmod	2002-11-20 13:35:26
Document Title	2.6_.doc
Document Creator	Microsoft Word
Document Author:	davids

Introduction _______________________________________________ Boomer II User Manual & Integrator’s Guide
Compliance Statement
The Wavenet Boomer-II OEM Modem Module has been tested and
found to comply with the limits for a class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation.
Output is specified at the antenna terminal of this module. This
modular transmitter is only approved for OEM integration into final
products that satisfy mobile operating requirements of 2.1091 of the
FCC rules. The final product and its antenna must operate with a
minimum separation distance of 20 cm or more from all persons using
the antenna with maximum average gain not exceeding 1 dBi to satisfy
MPE compliance. Separate approval is required for this module to
operate in portable products with respect to 2.1093 of FCC rules.
Wavenet has obtained certificates of Technical Acceptability for use in
Canada in accordance with the Radio Standards Procedure RSP-100
and Radio Standards Specification RSS119, Issue 3.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the manufacturer’s
instructions, may cause interference harmful to radio communications.
There is no guarantee however, that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult your supplier or an experienced radio/TV technician
for assistance.
Warning : Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s
authority to operate this equipment.
Wavenet Technology
12
BM210012WT26

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Creator                         : Microsoft Word
Create Date                     : 2002:11:20 14:38:23
Title                           : 2.6_.doc
Author                          : davids
Producer                        : Acrobat PDFWriter 4.05 for Windows
Modify Date                     : 2002:11:20 13:35:26-05:00
Page Count                      : 1

EXIF Metadata provided by EXIF.tools