Wavenet Technology BM29001 Wireless OEM Modem Module User Manual Revised pages Re CRN 24593

Download:
Mirror Download [FCC.gov]
Document ID	293654
Application ID	fodO6R8vgG//7u+3+4qR6Q==
Document Description	Revised pages Re CRN 24593
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.21kB (127586 bits)
Date Submitted	2003-01-03 00:00:00
Date Available	2003-01-21 00:00:00
Creation Date	2002-12-30 16:00:23
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2003-01-03 14:00:14
Document Title	Microsoft Word - Boomer II Integrators Guide _Rev 2.7_.doc
Document Creator	ADOBEPS4.DRV Version 4.31
Document Author:	davids

© Wavenet Technology Pty Ltd
ACN 079 965 003
Publication No. BM210012WT27
Published November 2002
This publication is copyright and no part may be reproduced or copied without the prior consent of:
Wavenet Technology Pty Ltd.
140 Burswood Rd
Burswood, 6100
Western Australia
Telephone:
Facsimile:
E-mail:
Web Site:
+61 8 9262 0200
+61 8 9355 5622
wavenet@wavenet.com.au
www.wavenet.com.au
This manual is intended to be used for the operation of Wavenet Technology equipment. Performance
figures quoted are typical values and subject to normal manufacturing and service tolerances.
Wavenet Technology Pty Ltd reserves the right to alter, without notice, the equipment, software or
specification to meet technological advancement.
Microsoft, Windows and the Windows logo are registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries. Other product and company names herein may be
the trademarks of their respective owners.
Whilst every precaution has been taken in the preparation of this document, neither Wavenet
Technology Pty Ltd nor any of its representatives shall have any liability to any person or entity with
respect to any liability, loss or damage caused or alleged to be caused directly or indirectly by the
information contained in this book.
Published by Wavenet Technology Pty Ltd.
This product contains a transmitter approved under the FCC rules.
800MHz Modem Module FCC ID: PQS-BM28001
900MHz Modem Module FCC ID: PQS-BM29001
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received including interference that may cause undesired
operation.
Introduction ________________________________________________ Boomer II User Manual & Integrator’s Guide
Compliance Statement
The Wavenet Boomer-II OEM Modem Module has been tested and
found to comply with the limits for a class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation.
Output is specified at the antenna terminal of this module. This
modular transmitter is only approved for OEM integration into final
products that satisfy mobile operating requirements of 2.1091 of the
FCC rules. The final product and its antenna must operate with a
minimum separation distance of 20 cm or more from all persons using
the antenna with maximum average gain not exceeding 1 dBi to satisfy
MPE compliance. Separate approval is required for this module to
operate in portable products with respect to 2.1093 of FCC rules.
Wavenet has obtained certificates of Technical Acceptability for use in
Canada in accordance with the Radio Standards Procedure RSP-100
and Radio Standards Specification RSS119, Issue 3.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the manufacturer’s
instructions, may cause interference harmful to radio communications.
There is no guarantee however, that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult your supplier or an experienced radio/TV technician
for assistance.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s
authority to operate this equipment.
Wavenet Technology
12
BM210012WT27

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:12:30 16:00:23
Producer                        : Acrobat Distiller 4.05 for Windows
Author                          : davids
Creator                         : ADOBEPS4.DRV Version 4.31
Title                           : Microsoft Word - Boomer II Integrators Guide _Rev 2.7_.doc
Modify Date                     : 2003:01:03 14:00:14-05:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools