Waxess DM1200E 2.4 GHz FHSS cordless phone User Manual D mode EVDO draft 1

Waxess Inc. 2.4 GHz FHSS cordless phone D mode EVDO draft 1

Users Manual

Dual ModeCommunication TerminalDM1200E/DM1250E(CDMA-EVDO) User GuideD mode EVDO draft 1.book Page i Friday, January 12, 2007 8:18 PM
D Mode CT User Guide ii Copyright © 2007 WaxessHandset 10 Antenna2 Betlclip attachment3 Speaker for Ringer4 Handset battery compartment5 New Message LED6 Handset Earpiece7LCD Display8Function Keys9Up/Down keys10 Menu and Off keys11 * Scroll Left12 Flash/Delete key13 Redial/Pause key14 Headset Jack15 # Scroll Right16 Intercom17 Handset Microphone18 Handset Charging ContactsD mode EVDO draft 1.book Page ii Friday, January 12, 2007 8:18 PM
D Mode CT User Guide iii Copyright © 2007 WaxessBase19 Base Speaker/Ringer20 LCD Display21 Function Keys22 Up/Down Keys23 Menu and Off Keys24 Intercom Key25 Speaker Phone Key26 Speaker Phone ON LED27 Redial/Pause Key28 New Message LED29 Flash Key30 DC IN 9V Jack31 TEL LINE Jack32 Corded Handset Jack33 Battery cover34 Data Access Port (for use withDM120UB DataAccessory Kit)34D mode EVDO draft 1.book Page iii Friday, January 12, 2007 8:18 PM
D Mode CT User Guide i Copyright © 2007 WaxessContentsGet ready . . . . . . . . . . . . . . . . . . . . . . 1Choose Location . . . . . . . . . . . . . . . . . . . . . 1Get set . . . . . . . . . . . . . . . . . . . . . . . 11Dialing mode . . . . . . . . . . . . . . . . . . . . . . 11Time and date . . . . . . . . . . . . . . . . . . . . . 12Set the ringer tone . . . . . . . . . . . . . . . . . . 14Key beep . . . . . . . . . . . . . . . . . . . . . . . . . 16Area codes . . . . . . . . . . . . . . . . . . . . . . . . 16Language . . . . . . . . . . . . . . . . . . . . . . . . . 18LCD contrast . . . . . . . . . . . . . . . . . . . . . . 19Name . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Handset registration . . . . . . . . . . . . . . . . . 19GO! . . . . . . . . . . . . . . . . . . . . . . . . . 22Make a wireless call . . . . . . . . . . . . . . . . . 22Make a landline call . . . . . . . . . . . . . . . . . . 23Calling options . . . . . . . . . . . . . . . . . . . . . 24Answer a wireless call . . . . . . . . . . . . . . . . 25Answer a landline call . . . . . . . . . . . . . . . . 26In-Call operations . . . . . . . . . . . . . . . . . . . 27Phone book . . . . . . . . . . . . . . . . . . . . . . . 30Messages . . . . . . . . . . . . . . . . . . . . . . . . . 35More features . . . . . . . . . . . . . . . . . . 43Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . 43Page and Intercom . . . . . . . . . . . . . . . . . . 47Two-line calling . . . . . . . . . . . . . . . . . . . . . 49Barge-in . . . . . . . . . . . . . . . . . . . . . . . . . 52Cellular only . . . . . . . . . . . . . . . . . . . . . . . 56CEL Phone Number . . . . . . . . . . . . . . . . . . 57Power back-up . . . . . . . . . . . . . . . . . . . . . 57D mode EVDO draft 1.book Page i Friday, January 12, 2007 8:18 PM
D Mode CT User Guide ii Copyright © 2007 WaxessPrecautions . . . . . . . . . . . . . . . . . . . . 59Important safety instructions . . . . . . . . . . . 60I.C. Notice . . . . . . . . . . . . . . . . . . . . . . . . 71General information . . . . . . . . . . . . . . 73D Mode CT Menu map . . . . . . . . . . . . 75Index . . . . . . . . . . . . . . . . . . . . . . . . 76D mode EVDO draft 1.book Page ii Friday, January 12, 2007 8:18 PM
D Mode CT User Guide iii Copyright © 2007 Waxess NotesD mode EVDO draft 1.book Page iii Friday, January 12, 2007 8:18 PM
Get readyD Mode CT User Guide 1 Copyright © 2007 Waxess11Get readyOptional: Data Accessory Kit (DM120UB, sold separately) available to connect with your PC for data communication. •Choose LocationSome important considerations:• Charge the handset for 12–15 hours before use it. • Locate the base near both a phone jack and a power outlet which is not controlled by a switch.• Keep the base and handset away from sources of electrical noise, such as motors and fluorescent lighting.• Leave enough room to raise both base antennas fully vertical.Included items• Base • Belt clip• Cordless handset • Wall mount bracket• AC adaptor for base • Telephone cord• AC adaptor for cordless handset •User guide• Rechargeable battery for cordless handsetD mode EVDO draft 1.book Page 1 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 2 Copyright © 2007 Waxess 1Desk or Table1Connect the telephone line cord to the TEL LINE jack and to a telephone jack.2Set the base on a desk or table and place the handset on the base.3Connect the handset cord to the jacks on the handset and the base, then set the handset in the cradle.4Raise both antennas to a vertical position.5Find the base AC adaptor (the larger adaptor, Model number AD-48091000), and connect it to the DC IN 9V jack and to a standard 120V AC. D mode EVDO draft 1.book Page 2 Friday, January 12, 2007 8:18 PM
Get readyD Mode CT User Guide 3 Copyright © 2007 Waxess1Wall mount1Attach the wall mount adaptor to the base.2Find the base AC adaptor (the larger adaptor, Model number 48091000), plug the connector into the DC IN 9V jack, then plug the telephone line cord to the TEL LINE jack.3Wrap the AC adaptor inside the molded wiring channel, then wrap the cord around the strain relief notch.4Raise the antennas to a vertical position.5Align the mounting slots on the base with the mounting posts on the wall plate. Then push in and down until the phone is firmly seated.6Connect the handset cord to the jacks on the handset and base, then set the corded handset in the cradle.7On the base, remove the handset retainer, flip it over, then replace it.D mode EVDO draft 1.book Page 3 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 4 Copyright © 2007 Waxess 1Base power onWhen powered on for the first time, the base goes through an initialization sequence.Note: Do not use the phone until the initialization sequence is complete.Power backup batteries (Optional)The optional back-up batteries provide a reserve power supply so the base can operate for up to 30 minutes (depending on battery condition) in case of power outages or if power is cut off to the base for any reason. Backup power activates immediately when the normal power supply to the base is cut off.1Verify power is disconnected from the base.2Open the battery cover on the bottom of the base.D mode EVDO draft 1.book Page 4 Friday, January 12, 2007 8:18 PM
Get readyD Mode CT User Guide 5 Copyright © 2007 Waxess13Insert five AA alkaline batteries with the polarity (+ and -) aligned as marked in the compartment.4Replace the cover.Note:• Batteries are not included• Batteries are not required to operate the product• There is no indication that shows when the base is operating with normal power or back-up power • If you choose to install back-up batteries, check the power level frequently (see “Power back-up” on page 57). Replace the batteries when the power level is less than half of maximum • After any power outage, check the battery power level and replace batteries as needed• The battery power comes on automatically when current from the AC adaptor is interrupted; unplugging the AC adaptor does not turn off power to the phone• Be sure to remove at least one battery when disconnecting power•The Battery Level indicator on the base menu screen may not show true battery condition unless all five batteries are installedD mode EVDO draft 1.book Page 5 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 6 Copyright © 2007 Waxess 1Caution: Use only AA alkaline batteries for power backup. Do not use rechargeable batteries. The battery compartment circuitry is not designed to recharge batteries.Standby ScreenWhen the sequence is complete, the Standby Screen appears. This screen appears on both the base and the handset, and is always visible when the phone is idle. At the bottom of the screen, the text indicates which service lines are active. CEL is wireless service, and TEL is landline service.The CEL indicator may take up to two minutes to appear, depending on cellular signal conditions in your area.If you have connected with your cellular service provider, the date and time may be set automatically. If not, see “Time and date” on page 12 to set the date and time manually.D mode EVDO draft 1.book Page 6 Friday, January 12, 2007 8:18 PM
Get readyD Mode CT User Guide 7 Copyright © 2007 Waxess1Signal levelThe Signal Level feature helps you find your strongest cellular service signal. Move the base around your location to find the strongest signal level.Be sure the CEL indicator is shown in the display before checking the signal level.Optional antenna removalThe base unit’s cellular antenna can be removed to allow attachment of an external antenna.Locate the three screws attaching the antenna to the base unit. Use a small Philips head screw driver to remove the three screws. Store the antenna and screws in a safe place.D mode EVDO draft 1.book Page 7 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 8 Copyright © 2007 Waxess 1Ready the cordless handsetINSTALL THE BATTERY1Open the cover.2Verify that the connector is properly aligned with the jack and connect the battery.Note: The connector is designed to easily fit the jack in only one direction. Do not use excessive force. 3Close the cover.D mode EVDO draft 1.book Page 8 Friday, January 12, 2007 8:18 PM
Get readyD Mode CT User Guide 9 Copyright © 2007 Waxess1CHARGE THE BATTERY1Find the cordless handset AC Adaptor (the smaller adaptor, Model number RGD41090500). Connect the AC adaptor to the DC 9V IN jack on the charger and to a standard 120V AC wall outlet.2Set the charger on a desk or table, then set the handset in the charger with the keypad facing forward.3Allow the battery to charge for 12–15 hours.Note: Charge the battery frequently. Leaving the battery uncharged for a prolonged period can adversely affect battery charging capacity. If this happens, replace the battery.D mode EVDO draft 1.book Page 9 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 10 Copyright © 2007 Waxess2A power indicator in the upper right corner of the LCD shows how much battery life remains.Full chargeLow chargeNote: Use only the rechargeable battery pack supplied with your cordless handset.D mode EVDO draft 1.book Page 10 Friday, January 12, 2007 8:18 PM
Get setD Mode CT User Guide 11 Copyright © 2007 Waxess22Get set•Dialing mode1Press the MENU key on the base.The Menu appears.2Press the  key so the highlight bar moves to Setup.This action is called “scrolling” throughout this guide.3Press F1 to “select” this menu item.This action is called “Press Select” throughout this guide.Another menu list appears.4Press the  key and scroll to Tone/Pulse.5Press F1 to select this item and this screen appears.Highlight the correct setting for your phone system, then press F1 to enter the setting in memory. A beep confirms the setting, and the Setup menu appears.D mode EVDO draft 1.book Page 11 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 12 Copyright © 2007 Waxess26Press EXIT to return to the main menu screen.ORPress EXIT twice or OFF to return to Standby. The following steps apply to both the base and the handset.•Time and dateThe time and date automatically synchronizes with the cellular network once when the base is powered on (if supported by your service provider). The time and date do not automatically synchronize with the network afterward and must be set manually. 1Press MENU.2Use the / keys and scroll to Time and Date.3Press Select.A cursor blinks on the hour number.4Use the keypad to enter the correct hour.The cursor moves to the right for the minute numbers.5Enter the correct minutes, and press OK.The AM/PM screen appears.6Use the  or  key to set AM or PM and press D mode EVDO draft 1.book Page 12 Friday, January 12, 2007 8:18 PM
Get setD Mode CT User Guide 13 Copyright © 2007 Waxess2OK.The time format setting appears.7Use the  or  key to set the time format and press OK.The date screen appears with months showing.8Use the keypad to enter the correct month.After entering the month, the cursor moves to the day.9Enter the correct day then press OK.The cursor appears on the first digit of the current year setting.10Use the keypad to enter the four digits for the correct year and press OKThe date format appears. 11Press  or  to select a format and press OK.You hear a confirmation tone and the Main menu appears.When the time and date are set on the base or on one of the cordless handsets, the time and date for all other components (handset or base) automatically synchronize after a few minutes. If a new cordless handset is added and properly registered, the time and date for the new handset will automatically synchronize.D mode EVDO draft 1.book Page 13 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 14 Copyright © 2007 Waxess2•Set the ringer toneYou can set different ring tones for CEL (wireless) calls and TEL (landline) calls.1Press MENU. 2Scroll to Ringer/Key Beep, and press Select.3Scroll to Ringer Tone, and press Select.The ringer tone menu for CEL calls appears first. The current ringer tone is highlighted. The base has three ring tones available. The handset has six rings available—three tones and three melodies. Note: Melodies are only available on the cordless handset.4Scroll through the list of tones.Pause on a tone name to hear a short sample of the tone. The sample plays two seconds for a ring tone and 10 seconds for a melody.5Press Select.The TEL Ring Tone setting appears.ORPress Exit to cancel without saving changes.6Follow steps 1–4 above to choose a tone, and press Select.A confirmation tone plays.D mode EVDO draft 1.book Page 14 Friday, January 12, 2007 8:18 PM
Get setD Mode CT User Guide 15 Copyright © 2007 Waxess2Set the ringer volumeYou can set the ringer volume from menu. The choices are Off-Low-Medium-High.1Press MENU, scroll to Ringer/Key Beep, and press Select.2Scroll to Ringer volume, and press Select.The current ring volume setting is highlighted.3Scroll to a volume setting. Each time you stop on a setting a sample plays briefly.4Scroll to the ring volume you want and press Select.A confirmation tone plays and the Ringer/Key beep menu appears.5Press Exit or OFF to return to the Standby screen.NIGHT VOLUMEYou can set the volume for the ringer to a lower level for night time between 9 p.m. and 6 a.m. based on the phone’s internal clock. 1Press MENU, scroll to Ringer/Key Beep, and press Select.2Scroll to Night Volume and press Select.3Use the  or  key to change the volume setting.D mode EVDO draft 1.book Page 15 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 16 Copyright © 2007 Waxess2A sample of the volume level plays when you move the cursor. The sample plays two seconds for each ringer tone and 10 seconds for each melody.4Press Select to set the ringer. A tone confirms the setting.•Key beepSet the phone so that you hear a beep each time you press a button, or turn off the beep feature.1Press MENU, scroll to Ringer/Key Beep, and press Select.2Scroll to Key beep, press Select, then choose On or Off.3Press OK to enter the setting.A tone confirms the setting and the Ringer/Key beep menu appears.•Area codesEnter up to three area codes. With local area codes stored, the phone can distinguish between local and long distance calls.1Press MENU.2Scroll to Setup, then press Select.3Scroll to Area Code, and press Select.D mode EVDO draft 1.book Page 16 Friday, January 12, 2007 8:18 PM
Get setD Mode CT User Guide 17 Copyright © 2007 Waxess24Use the keypad to enter the area code number, then press OK.If you make a mistake, press FLASH/DEL to erase the last digit entered.5Press OK to set the code.A beep confirms the setting and the Setup menu appears.6Press Exit or OFF to return to the Standby screen.Add/remove a 1With area codes stored in memory, the and keys have a unique function in phone memory dialing.If you need to add a 1 to a 10–digit phone number for proper dialing in your area, press . Press again to remove the number 1. When retireving a number from the Caller ID log, use the key to add or remove a 1. This feature is not available when using Redial.D mode EVDO draft 1.book Page 17 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 18 Copyright © 2007 Waxess2Add/remove area codeIf you need to add the area code to a 7–digit number, press to display the area code list. Scroll to the correct area code, and press OK. At this point you can also press to add the number 1, if needed. To remove the area code, press to remove the number 1 (if present), then press .Note: When dialing numbers from the Caller ID log, area codes stored in the phone are not accessible. Press and use the keypad to add the area code. This feature is not available when using Redial. •Language1Press MENU, scroll to Setup, and press Select.2Scroll to Language, and press Select.The highlight bar shows the current language setting.3Scroll to the language you want, and press Select.A beep confirms the setting and the Setup menu appears. The menu appears in the language you selected.D mode EVDO draft 1.book Page 18 Friday, January 12, 2007 8:18 PM
Get setD Mode CT User Guide 19 Copyright © 2007 Waxess2•LCD contrast1Press MENU, scroll to Setup, and press Select.2Scroll to LCD Contrast, and press Select.3Pressto darken the display orto lighten the display.4Press OK to set the contrast. •Name Your phone arrives with the name “Base” preassigned to the base. Each handset receives a number (1–4) in the order of registration. You can assign a unique name to the base and even change the number and name assigned to a handset. 1Press MENU, scroll to Setup, and press Select.2Scroll to Name the Unit and press Select.3Enter the name and press Select. See “Enter names and characters” on page 31.A tone confirms the setting.•Handset registrationRegisterYou can register up to three more handsets with the base. Each new cordless handset must be electronically registered with the base. The cordless handset D mode EVDO draft 1.book Page 19 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 20 Copyright © 2007 Waxess2included in this package is preregistered at the factory with the base. If it somehow becomes deregistered, use this procedure to reregister the handset.1On the handset, press MENU, scroll to Setup and press Select.2Scroll to Register and press Select.The display shows “Press and hold Intercom on base, then OK.”3Press and hold Intercom (at least two seconds) on the base until you hear a beep.4Then, press OK on the handset.Registration takes only a few seconds.When registration completes, you hear a tone and this message appears on the LCD screen.Deregister1Press MENU, scroll to Setup, and press Select.2Scroll to Deregister and press Select.A list of registered cordless handsets appears.3Scroll to the handset you want to deregister and press Select.The confirmation message “Delete registration?” appears.4Press Yes to confirm, or press No to return to the previous screen.D mode EVDO draft 1.book Page 20 Friday, January 12, 2007 8:18 PM
Get setD Mode CT User Guide 21 Copyright © 2007 Waxess2When deregistration is complete, the confirmation message “Handset 1 is deregistered” appears. D mode EVDO draft 1.book Page 21 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 22 Copyright © 2007 Waxess33GO!•Make a wireless callNote: When making a wireless call, no dial tone is generated until the phone connects to the cellular network.Cordless handset Speakerphone on base Corded handset on base•Press CEL•Enter number•Press CELOR•Enter number•Press CEL•Enter number•Press CEL •Lift handset off base•Enter number•Press CEL•To end the call, Press OFF •To end the call, press SP-PHONE or OFF•To end the call, replace the handsetD mode EVDO draft 1.book Page 22 Friday, January 12, 2007 8:18 PM
GO!D Mode CT User Guide 23 Copyright © 2007 Waxess3•Make a landline callSet earpiece volumeON CORDED HANDSETDuring a call, move the selector switch to L, M, or H.ON BASE SPEAKER PHONEDuring a call, press  for louder or  for softer.Cordless handset Speakerphone on base Corded handset on base•Press TEL•Enter numberOR•Enter number•Press TEL•Enter number•Press TEL •Lift handset off base•Enter number•Press TEL•To end the call, Press OFF •To end the call, press SP-PHONE or OFF•To end the call, replace the handsetD mode EVDO draft 1.book Page 23 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 24 Copyright © 2007 Waxess3ON CORDLESS HANDSET DURING A CALLPress  for louder or  for softer. •Calling optionsSpeed dial1Set up keys 0–9 with numbers in the phone book for speed dial. See “Enter numbers directly” on page 32.2Press and hold the appropriate number key, then press CEL or TEL. If you need to add or remove the number 1 or the area code for proper dialing in your area, see “Add/remove a 1” on page 17, or “Add/remove area code” on page 18.RedialThe phone memory holds the last five numbers dialed. Each number can have up to 32 digits.1Press REDIAL/P to search through the numbers.In the upper left corner, the LCD shows a C if the call was on the cellular line or a T if the call was on the landline. 2Press CEL or TEL to redial the number.D mode EVDO draft 1.book Page 24 Friday, January 12, 2007 8:18 PM
GO!D Mode CT User Guide 25 Copyright © 2007 Waxess3Pause (for TEL line use only)While entering a phone number, press REDIAL/P to add a two second pause. The pause is added as the digits are transmitted when dialing. Press REDIAL/P again to make the pause longer. The letter P appears in the number each time you enter the pause.Note:• Pause is available only when using the TEL line. Pause may not be recognized as a valid number on the cellular network and calls may not connect.• Pause is disabled when dialing on the TEL line as a second line, such as while the cellular line is connected to another call. Pause is also disabled during conference calls.•Answer a wireless callWhen the phone receives a wireless call:• The base and all registered cordless handsets ring.•The F1 key on the handset flashes green.• The caller ID, if available, appears on the LCD screen.D mode EVDO draft 1.book Page 25 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 26 Copyright © 2007 Waxess3 •Answer a landline callWhen the phone receives a landline call• The base and all registered cordless handsets ring.•The F2 key on the handset flashes green.• Caller ID, if available, appears on the LCD screen. Cordless handset Speakerphone on base Corded handset on base•Press CEL •Press CELOR•Press SP-PHONE•Lift handset off base•To end the call, press OFF twice•To end the call, press SP-PHONE or OFF•To end the call, replace the handsetCordless handset Speakerphone on base Corded handset on base•Press TEL •Press TELOR•Press SP-PHONE•Lift handset off base•To end the call, press OFF twice•To end the call, press SP-PHONE or OFF•To end the call, replace the handsetD mode EVDO draft 1.book Page 26 Friday, January 12, 2007 8:18 PM
GO!D Mode CT User Guide 27 Copyright © 2007 Waxess3•In-Call operationsPlace a call on Hold• Press Hold to place a call on hold.• Press Exit to return to the call. Mute a call• Press Mute to temporarily cut off the microphone.• Press Unmute to return to the callTransfer a callYou can transfer calls between the base and the handsets, and from handset to handset. This function works for both cellular and landline calls.BASE TO HANDSET TRANSFER1Press Intercom, scroll to the handset (or base) that you want and press Page. The base and the handset involved in the transfer operation begin beeping (a different tone than with the Intercom function), and a message appears on the LCD.If there is no answer within 60 seconds, the D mode EVDO draft 1.book Page 27 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 28 Copyright © 2007 Waxess3page and the transfer are cancelled and you return to the call. You can press Exit to return to the call immediately.2Press Answer to take the transfer, or press Exit to reject the transfer. The call returns to the device that started the transfer - handset or base.Note: When transferring between base and a handset, the caller is transferred immediately and is not put on hold.3Press OFF to end the call.ORFollow the steps above to transfer the call back to the base.You can also use the HOLD function to start a transfer. During a call, press HOLD, select Transfer, then follow the steps above.HANDSET TO HANDSET TRANSFER1During a call, press Intercom, scroll to the handset you want, and press Page. The handset involved in the transfer operation begins beeping (a different tone than with the Intercom D mode EVDO draft 1.book Page 28 Friday, January 12, 2007 8:18 PM
GO!D Mode CT User Guide 29 Copyright © 2007 Waxess3function) and a message appears on the LCD.If there is no answer within 60 seconds, the page and the transfer are cancelled and you return to the call. You can press Exit to return to the call immediately.2Press Answer on the handset receiving the page.The call is now on hold, and the parties with the handsets can speak.3Press Exit on the handset that started the transfer.The call is now transferred to the receiving handset.On the receiving handset, you can press OFF or Exit to reject the transfer. Then, the call returns to the handset that started the transfer.4Press OFF to end the call.You can also use the HOLD function to start a transfer. During a call, press HOLD, select Transfer, then follow the steps above.D mode EVDO draft 1.book Page 29 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 30 Copyright © 2007 Waxess3Set up a conference callConference calling lets you make a call with two other participants. The phone places the third call with the service (cellular or landline) that is not being used. The Conference feature is available only with the cordless handset.1Make a normal call to the first participant.2Press Hold, scroll to Initiate a call, and press Select.3Enter the number of the next participant, and press CEL (or TEL).When the other participant answers, you can speak privately without the other participant. Press FLIP to change between the participants. The LCD shows which line (CEL or TEL) is in use.4 Press CONF to connect all participants.5To drop a participant from the conference call press CEL DROP or TEL DROP.Press OFF to drop all participants and end the call. •Phone bookUse the phone book to store up to 50 names and numbers. D mode EVDO draft 1.book Page 30 Friday, January 12, 2007 8:18 PM
GO!D Mode CT User Guide 31 Copyright © 2007 Waxess3Enter names and charactersUse the keypad to choose the characters you want. Each time you press a key, the letters on that key appear first as capital letters, then as lower case letters, then the number corresponding to that key. Number of times key pressedkeys1234567891!“*#$%& ‘()<>+,-./:;?@\=^_‘~ABCabc2DEFdef 3GH I gh i 4JKLjkl5MNOmno6PQRSpqr s7TUVtuv8WXYZwxyz90SpaceD mode EVDO draft 1.book Page 31 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 32 Copyright © 2007 Waxess3• Use and to scroll left or right. • Press Clear to erase a character.Enter numbers directly1Press MENU, scroll to Memory, and press Select.2Scroll to Phone book, and press Select.3Scroll to Add new entry, and press Select.“Name?” appears in the display.4Use the letters on the keypad to enter the name (up to 16 characters) and press OK.Press OK to leave Name blank.“Number?” appears in the display.5Use the keypad to enter the number with area code and press OK.The Distinctive ring setting appears.This feature lets you add a special ring tone to phone numbers that you store in memory. During an incoming call, the phone compares the number to the distinctive ring list, and when it finds a match, the distinctive ring plays. Then, you can recognize a caller just from the type of ring tone you hear. 6Scroll to Ringer 1, 2, or 3, Melody 1, 2, or 3, or No setting and press OK.Melody tones are only available on the handset.The Speed Dial screen appears.7Choose an empty Speed Dial key number and D mode EVDO draft 1.book Page 32 Friday, January 12, 2007 8:18 PM
GO!D Mode CT User Guide 33 Copyright © 2007 Waxess3press OK.A beep confirms the entry and the Standby screen appears. Press Skip to complete the entry without registering it in Speed Dial.Edit names or numbers1While in the phone book, scroll to Find name and press Select.2Scroll to the name you want to edit and press Select.Call/Dial, Edit, Delete, and Delete all appear.3Use the  or  key to highlight Edit and press Select.4Edit the name.ORPress OK to skip to the number.5Edit the number if needed and press OK.You hear a tone, Complete appears in the LCD and the list of names appears. Enter numbers from Caller ID1While in the Caller ID log, scroll to the name/number you want to enter in the phone book and press Select.Call/Dial, Edit, and Delete appear.D mode EVDO draft 1.book Page 33 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 34 Copyright © 2007 Waxess32Scroll to Save and press Select.“Name?” appears.3If the Caller ID shows a name, press OK to continue, or use the keypad to enter the name, then press OK to continue.4If the Caller ID shows a number, press OK.You can also use the keypad to enter a number, then press OK.The Distinctive ring settings appear.5Scroll to the ringer tone or melody you want, and press OK.The Speed dial setting appears.6Choose an empty Speed Dial key number, and press OK.A beep confirms the entry and the Standby screen appears. OR7Press Skip to complete the entry without registering it in Speed Dial.A tone confirms the entry and Complete appears in the LCD. After a brief pause, the name and number you just entered appears. 8Press CEL or TEL to make the call.Press OFF to return to Standby.Use the and keys to enter a 1 or area codes if needed for proper dialing in your area. See “Add/remove a 1” on page 17., or “Add/D mode EVDO draft 1.book Page 34 Friday, January 12, 2007 8:18 PM
GO!D Mode CT User Guide 35 Copyright © 2007 Waxess3remove area code” on page 18.Call from phone book1Press MENU, scroll to Memory, and press Select.2Scroll to Phone Book, and press Select.3Scroll to Find Name, and press Select.4Scroll to the name you want to dial and press Select.Four options appear on the LCD.5Scroll to Call/Dial and press Select.The name and number appear in the LCD.6Press CEL or TEL to make the call.Speed dialFor quick, one-button dialing, you can store up to 10 numbers in Speed Dial memory. See “Speed dial” on page 24.•MessagesNote: You must have a subscription to use these message services. Check with your service provider for details.D mode EVDO draft 1.book Page 35 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 36 Copyright © 2007 Waxess3Voice messagesThe D Mode CT works with both cellular and landline voicemail. SET UP VOICEMAIL1Press MENU, scroll to Setup, and press Select.2Scroll to Messages, and press Select.3Scroll to Voicemail setup, and press Select.The message VM Number (CEL)? appears.4Use the keypad to enter the voicemail number for your cellular service provider, then press OK.The message VM number (TEL)? appears.5Use the keypad to enter the voicemail number for your landline service, then press OK.A beep confirms your entry.CHECK VOICEMAIL MESSAGESWhen new messages are waiting, the message LEDs on the base and the handset blink.D mode EVDO draft 1.book Page 36 Friday, January 12, 2007 8:18 PM
GO!D Mode CT User Guide 37 Copyright © 2007 Waxess3The LED blinks faster for a landline voicemail, slower for a cellular voicemail, and equally if there are messages for both landline and cellular.1Press MENU, scroll to Messages, and press Select.2Scroll to Voicemail and press Select.3Scroll to the voicemail–CEL Voicemail or TEL Voicemail–with the message waiting and press Select.To manage messages (such as saving, deleting, or forwarding), follow the commands for your specific voicemail system.Short Message Service (SMS)This feature–available only with cellular service–lets you send and receive text messages to other SMS enabled cellular phones through the CEL connection at the base or the cordless handset. Check with your service provider for availability.The options available in SMS are:•Write new•Saved•In Box•Storage statusD mode EVDO draft 1.book Page 37 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 38 Copyright © 2007 Waxess3Note: Due to the data access process in the D Mode CT, the phone may not respond instantly when keys are pressed. This is normal operation, and any delay is no more than one or two seconds.WRITE A NEW MESSAGE1Press MENU, scroll to Messages, and press Select.2Scroll to SMS, and press Select. Write new is highlighted.3Press Select.4Use the keypad to write a message up to 160 characters long, including spaces and special characters. See “Enter names and characters” on page 31.)5When you finish writing, press OK. The new message submenu appears with Send, Edit, Save.If the phone receives a call or someone initiates a call on another handset while you are writing a message, the message is automatically stored in Saved messages. You can access the message later, edit the message, if needed, then send the message by following the steps below.D mode EVDO draft 1.book Page 38 Friday, January 12, 2007 8:18 PM
GO!D Mode CT User Guide 39 Copyright © 2007 Waxess3SEND A NEW MESSAGE1Write a message, then press OK.Send, Edit, and Save appear.2Scroll to Send, and press Select.Recipient No.? appears.3Enter the phone number of the recipient and press OK.To send a message to a number that is stored in the phone book, press MENU, scroll to the entry you want, and press Select.Note: Verify that the CEL line is not in use before sending the message.A confirmation message appears. Then, the SMS menu appears. Press EXIT to return to the SMS main menu.4To save the message before exiting, follow the steps in “Save a new message.” The message is stored in Saved messages for easy viewing later. ORPress No to exit.SAVE A NEW MESSAGE1After writing a message, press OK.2Scroll to Save, and press Select. The message is stored in Saved messages for easy viewing later. Press EXIT to return to the SMS main menu.D mode EVDO draft 1.book Page 39 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 40 Copyright © 2007 Waxess3VIEW SAVED MESSAGES1Press MENU, scroll to Messages, press Select.2Scroll to SMS, and press Select.3Scroll to Saved, and press Select.4Scroll to the message you want to read, and press Select. RECEIVE A MESSAGEWhen the D Mode CT receives a text message, you hear a distinctive ring tone and an envelope icon appears in the display. The message goes to the Inbox.CHECK THE INBOX FOR READ AND UNREAD (NEW) MESSAGES1Press MENU, scroll to Messages, and press Select.2Scroll to SMS, and press Select.3Scroll to Inbox, and press Select.4Scroll to UnRead Messages, and press Select.If you have no unread messages, an error tone sounds.OR5Scroll to Read messages, and press Select.6Scroll to the message you want to read, and press Select.D mode EVDO draft 1.book Page 40 Friday, January 12, 2007 8:18 PM
GO!D Mode CT User Guide 41 Copyright © 2007 Waxess3When you exit the Unread Messages list, any messages that have not been viewed are automatically stored in the Read Messages list. Be sure to view all unread messages before exiting the Unread Message list.REPLY TO A MESSAGE1While reading a message, press Select.2Scroll to Reply, and press Select.Write a reply the same way as you write a new message, press OK, then Select to send the message.FORWARD A MESSAGE1While reading a message, press Select.2Scroll to Forward and press Select.3Enter the recipient’s number and press OK.To send to a number from the phone book, press MENU, scroll to the entry you want, and press Select.Note: Forwarding a message can only be done through a CEL connection.DELETE A MESSAGEWhile reading a message, press Select, scroll to Delete, and press OK. D mode EVDO draft 1.book Page 41 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 42 Copyright © 2007 Waxess3CALL THE MESSAGE SENDERWhile viewing a message, press Select, scroll to Call, and press Select. The phone dials the number automatically on the cellular service.CHECK SMS STORAGE STATUS1Press MENU, scroll to Messages, and press Select.2Scroll to SMS, and press Select.3Scroll to Storage Status and press Select.The storage status appears.The Storage status feature shows how many SMS messages are saved in memory or stored in the inbox. Storage capacity is limited, and there is no indication that the memory is full. When the message memory gets full, no more SMS messages can be received, so it is important to clear the memory frequently. D mode EVDO draft 1.book Page 42 Friday, January 12, 2007 8:18 PM
More featuresD Mode CT User Guide 43 Copyright © 2007 Waxess44 More features•Caller IDThis feature helps identify incoming calls and requires subscription through your service provider. When Caller ID is active, your phone may display the caller’s name and phone number if the landline or cellular service supports it.Note: Caller ID and Call Waiting are usually included with cellular calling plans, but landlines may require a separate subscription. Check with your service provider for details.Caller ID informationSINGLE CEL OR TEL CALLIn Standby, the Caller ID normally shows new and total calls received.On a single incoming call, Caller ID shows the time and date, the caller’s name, and the number. CEL or TEL blinks depending on the type of call–cellular service or landline. D mode EVDO draft 1.book Page 43 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 44 Copyright © 2007 Waxess4SIMULTANEOUS CEL AND TEL CALLWhen both landline and cellular services are active, the phone can receive both types of calls at the same time or very close together. When that happens, Caller ID information for both calls appears in the display and the call arriving first is on top.CALL WAITINGIf you receive another call during a call in progress, information for both calls appears in the displays Press FLASH/DEL to answer the new call. Press FLASH/DEL again to return to the first call.If the current call is on the CEL line and another call arrives also on the CEL line, a “C” blinks in the display. If the current call is on a CEL line and the new call is on the TEL line, the “C” remains solid, and the “T” indicator blinks.If you receive a call waiting signal during the conference call, press FLASH to answer the call. Call in progressNew callD mode EVDO draft 1.book Page 44 Friday, January 12, 2007 8:18 PM
More featuresD Mode CT User Guide 45 Copyright © 2007 Waxess4Check the logThe Caller ID log lists the name associated with the Caller ID data. If the data received does not have proper name data, the phone number is listed instead.Press  to scroll through the log from newest to oldest. Press  to scroll through the log from oldest to newest. The log holds up to 50 entries. Dial a number1Scroll to a name/number displayed, and press Select twice.The number appears in the display.If the number’s area code is the same as an area code stored in the phone memory (see “Area codes” on page 16), the area code may not appear. If the area code is required for dialing, press # to add the area code to the number. If the number 1 is also required for dialing, press * to add 1 to the beginning of the number.2Press CEL or TEL to make the call.Save a number1Scroll to a name/number displayed, and press Select.D mode EVDO draft 1.book Page 45 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 46 Copyright © 2007 Waxess42Scroll to Save, and press Select.3Enter a name if needed (see “Enter names and characters” on page 31) and press OK.4Edit the number if needed and press OK.The Distinctive Ring menu appears.5Scroll to the setting you want and press OK.The Speed Dial menu appears.6Scroll to the speed dial number that you want for this new entry and press OK.ORPress Skip to exit. A tone confirms that the entry is stored in the phone book, and the name and number appear in the display.7Press OFF twice to return to Standby.Delete a numberONE BY ONE1Press  to scroll through the log from newest to oldest. Press  to scroll through the log from oldest to newest. 2Stop on the number you want, press Select.3Scroll to Delete, and press Select.A confirmation message appears.4Press Yes to delete the number.A tone confirms your choice and the Caller ID log appears.D mode EVDO draft 1.book Page 46 Friday, January 12, 2007 8:18 PM
More featuresD Mode CT User Guide 47 Copyright © 2007 Waxess4ORPress NO and the Caller ID menu appears.DELETE ALL1Press , then press Select.2Scroll to Delete ALL and press Select.A confirmation message appears.3Press Yes to delete all data from the Caller ID log.ORPress NO and the Caller ID menu appears.•Page and IntercomPageThe Page feature lets you locate the handset if it is misplaced, but it also can be answered by the handset. Page can be initiated by the base or the cordless handset.1Press INTERCOM on the base, scroll to the handset you want to page, and press PAGE.ORTo send a page to all registered handsets, select All and press PAGE.The Page All feature is only available at the base.D mode EVDO draft 1.book Page 47 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 48 Copyright © 2007 Waxess4The handset beeps up to 60 seconds, and Paging Base appears in the display.2On the handset receiving the page, press ANSWER to connect with the base.On Intercom appears in the display.3Press Exit to stop the page without connecting to the paging party through the Intercom.For Page All, the page stops when any handset responds to the page. Intercom is not available for Page All.IntercomThe Intercom feature is available on the handset and the base.1Press INTERCOM, scroll to the handset you want (or base), and press PAGE.The handset or base beeps up to 60 seconds and Paging Handset 1 (or 2, 3, or 4) appears in the display.2To answer:• On the handset, press ANSWER to connect with Intercom.• On the base, lift the corded handset, press ANSWER, or press SP-PHONE to connect with the Intercom.D mode EVDO draft 1.book Page 48 Friday, January 12, 2007 8:18 PM
More featuresD Mode CT User Guide 49 Copyright © 2007 Waxess4During an Intercom connection, use Mute to turn off the microphone at the base or on the handset.Note: While using INTERCOM, an incoming call from the CEL line automatically terminates the INTERCOM connection. An incoming call from the TEL line will not terminate the INTERCOM connection unless the call is answered by the base or any handset. •Two-line callingThe Dual Mode Communication Terminal is a two-line phone that offers unique calling features because it can be used to make or receive two separate calls at the same time; one call on the landline (TEL) service and the other on the cellular (CEL) service.D mode EVDO draft 1.book Page 49 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 50 Copyright © 2007 Waxess4Quick reference chartWhen calling on: Line Second call can be made: Using Line:Base Cellular Any cordless handsetLandlineCordless handset Cellular Base LandlineCordless handset Cellular Any remaining cordless handsetLandlineBase Landline Any remaining cordless handsetCellularCordless handset Landline Base CellularCordless handset Landline Any remaining cordless handsetCellularD mode EVDO draft 1.book Page 50 Friday, January 12, 2007 8:18 PM
More featuresD Mode CT User Guide 51 Copyright © 2007 Waxess4Make two separate calls1Use the base (corded handset or speakerphone) to place a call–for example, a landline (TEL) call (see “Make a landline call” on page 23).2Place a cellular (CEL) call, for example, with a handset that is not in use (see “Make a wireless call” on page 22).• The display on any handset or base not in use shows XXX in use; XXX means base or handset in this case.• The two calls are completely separate and cannot be conferenced.• If Barge-In is on (see “Barge-in” on page 52), and the first call is made from a cordless handset on a landline, other handsets can join the call by pressing TEL; but the base can not join the call.Receive two separate calls1When a call comes in–for example, a landline (TEL) call, answer it normally. In this example, use the corded handset on the base. See “Answer a landline call” on page 26.2If a cellular (CEL) call comes in, use a cordless handset and press CEL to answer it.D mode EVDO draft 1.book Page 51 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 52 Copyright © 2007 Waxess4Remember that the corded handset and the speakerphone on the base cannot be used at the same time.Call waiting with two calls1While a call is in progress (as in the above example) and the landline (TEL) receives another call, Call waiting appears in the display and any other cordless handsets not in use will ring.2To answer the call, press FLASH/DEL on the base, or TEL on any handset not in use.If the new call comes in on a different line, press the appropriate key (CEL or TEL) regardless of whether you are using the base or a handset.•Barge-inAfter placing a landline (TEL) call with a cordless handset, this feature allows up to three other registered cordless handsets to join the call. Before using the Barge-In feature, read the following information.• The D-Mode CT comes with the Barge-In feature set to off–it must be activated before use.• If power to the base is interrupted, Barge-In must be reactivated.• The first cordless handset to place the call is the D mode EVDO draft 1.book Page 52 Friday, January 12, 2007 8:18 PM
More featuresD Mode CT User Guide 53 Copyright © 2007 Waxess4“master” and fully controls the call. Other registered handsets that join the call are “slaves” and can only join or exit the call.• Barge-In works only for cordless handsets during a landline (TEL) call and is not operable on the base. Note: Remember that with Barge-In activated, privacy may be compromised. Any registered handset can join the call, but there is no indication that another handset joined the call.D mode EVDO draft 1.book Page 53 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 54 Copyright © 2007 Waxess4Quick reference chartNotes: See next page.When calling on: Line Second call can be made: Using: Line:Base1Cellular •1 or more cordless handsetsLandline2,41 cordless handset Cellular •Up to 3 cordless handsets•baseLandline2,3,42 or more cordless handsetsCellular Not available 5Base Landline • 1 cordless handset Cellular2,41 cordless handset Landline • 1 cordless handset•baseCellular2,42 or more cordless handsetsLandline • 1 cordless handset•baseCellular2,4D mode EVDO draft 1.book Page 54 Friday, January 12, 2007 8:18 PM
More featuresD Mode CT User Guide 55 Copyright © 2007 Waxess41 Base includes the speakerphone and corded handset.2 In Barge-In mode, Page/Intercom between base and cordless is disabled during a call.3 Conference call feature disabled for CEL and TEL4 Call transfer disabled5 Use of two or more cordless handsets on cellular line is only available in Cellular Only mode.Set up Barge-In1Press MENU, scroll to Setup, and press Select.2Scroll to Barge-In and press Select.3Scroll to ON, and press OK.A tone confirms the choice and the Setup menu appears. 4Press Exit twice to return to Standby.Use Barge-In1Verify that Barge-In is activated, then use one handset to place a call.2After the call is answered, press TEL on any handset to join the call.D mode EVDO draft 1.book Page 55 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 56 Copyright © 2007 Waxess4•Cellular onlyWhen activated on the base, the Cellular Only mode enables up to four cordless handsets to join in a conference call on the cellular line (CEL) call. Activating Cellular Only automatically deactivates the landline, so the TEL icon on the LCD does not appear. Set up Cellular only1Disconnect the telephone cord from the base.2Press MENU, scroll to Setup, and press Select.3Scroll to Cellular Only, and press Select.4Scroll to On, and press Select.A tone confirms the choice, and the Setup menu appears.Note: With Cellular Only activated, privacy may be compromised. Any registered cordless handset can join the call, but there is no indication that another handset has joined the call.Turn off Cellular onlyIf landline services are needed, deactivate this feature first.1Press MENU, scroll to Setup, and press Select.D mode EVDO draft 1.book Page 56 Friday, January 12, 2007 8:18 PM
More featuresD Mode CT User Guide 57 Copyright © 2007 Waxess42Scroll to Cellular Only, and press Select.3Scroll to Off, and press Select.4Connect the telephone cord.A tone confirms the choice, and the Setup menu appears.•CEL Phone NumberUse this feature to see your CEL telephone number.1From the Stand-by mode, check the display to ensure that the CEL mode is active.CEL should appear in the lower left corner of the display.2Press MENU, scroll to Setup, and press Select.3Scroll to Setup and press Select4Scroll to CEL Phone Number and press Select.The cellular number appears on the screen.5To exit, press Exit or Off.•Power back-upPower back-up for the base is an optional feature (not required to operate this product) that allows the base to operate for up 30 minutes even (depending on battery condition) if AC power is disrupted. If you install batteries for the Power Back-up feature you can check the condition of the batteries while they are installed.D mode EVDO draft 1.book Page 57 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 58 Copyright © 2007 Waxess41On the base, press MENU, scroll to Setup, and press Select.2Scroll to Battery Level, and press Select.Current power level for the batteries appears.If no batteries are installed, the level indicates “Replace.” OKReplace3Press Exit to return to the Setup menu.Notes about Power Back-up• Use new batteries.• There are no indicators to inform you when the phone is operating under regular power or backup power. • If you disconnect the AC power adaptor, Power Back-up starts automatically. • Check battery levels frequently, and replace the batteries if the charge level drops below one half of fully charged.• After every power outage, check the batteries and replace them as needed.• Actual operating time using Power Back-up varies depending on the condition of the batteries.D mode EVDO draft 1.book Page 58 Friday, January 12, 2007 8:18 PM
PrecautionsD Mode CT User Guide 59 Copyright © 2007 Waxess55 PrecautionsBefore you read anything else, please observe the following precautions.Warning!Waxess Inc. DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture.Rechargeable Nickel-Metal-Hydride Battery Warning• This equipment contains a rechargeable Nickel-Metal-Hydride battery.• Nickel is a chemical known to state of California to cause cancer.• The rechargeable Nickel-Metal-Hydride battery contained in this equipment may explode if disposed of in a fire.• Do not short-circuit the battery.• Do not charge the rechargeable Nickel-Metal-Hydride battery used in his equipment in any charger other than the one designed to charge this battery as specified in the owner's manual. Using another charger may damage the battery or cause the battery to explode.D mode EVDO draft 1.book Page 59 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 60 Copyright © 2007 Waxess5Rechargeable Nickel-Metal-Hydride Batteries Must Be Recycled or Disposed of Properly •Important safety instructionsWhen using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons:1Read and understand all instructions.2Follow all warnings and instructions marked on the product.3Unplug this product from the wall outlet before cleaning. Use a dry cloth for cleaning without liquid or aerosol cleaners.4Do not use this product near water; for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.5Do not place this product on an unstable cart, D mode EVDO draft 1.book Page 60 Friday, January 12, 2007 8:18 PM
PrecautionsD Mode CT User Guide 61 Copyright © 2007 Waxess5stand, or table. The telephone may fall, causing serious damage to the unit.6Slots and openings in the cabinet and the back or bottom are provided for ventilation. To protect the product from overheating, these openings must not be blocked or covered. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided.7This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.8Do not allow anything to rest on the power cord. Do not locate this product where the cord will be damaged by persons walking on it.9Do not overload wall outlets and extension cords, as this can result in the risk of fire or electrical shock.10Never push objects of any kind into this product through cabinet slots, as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. 11To reduce the risk of electric shock, do not disassemble this product. Take it to qualified service personnel when service or repair work is required. Opening or removing covers may D mode EVDO draft 1.book Page 61 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 62 Copyright © 2007 Waxess5expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used.12Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:A When the power supply cord is damaged or frayed.B If liquid has been spilled into the product.C If the product has been exposed to rain or water.D If the product does not operate normally when following the operating instructions. (Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive repair work by a qualified technician.)E If the product has been dropped or the cabinet has been damaged.F If the product exhibits a distinct change in performance.13Do not use the telephone to report a gas leak in the vicinity of the leak.D mode EVDO draft 1.book Page 62 Friday, January 12, 2007 8:18 PM
PrecautionsD Mode CT User Guide 63 Copyright © 2007 Waxess5ADDITIONAL BATTERY SAFETY PRECAUTIONSCaution: To reduce the risk of fire or injury to persons by the battery, read and follow these instructions:1Use only the battery pack specified in the owner's manual.2Do not dispose of the battery pack in a fire. The cell may explode. Check the Nickel Metal Hydride battery disposal package insert for disposal instructions.3Do not open or mutilate the battery pack. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.4Exercise care in handling the battery in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.5Charge the battery pack provided with or identified for use with this product only in accordance with the instructions and limitations specified in the owners manual provided for this product.6Observe proper polarity orientation between the battery pack and battery charger.SAVE THESE INSTRUCTIONS!D mode EVDO draft 1.book Page 63 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 64 Copyright © 2007 Waxess5Important Electrical ConsiderationsUnplug all electrical appliances when you know an electrical storm is approaching. Lightning can pass through your household wiring and damage any device connected to it. This phone is no exception.The FCC Wants You To KnowChanges or modifications to this product not expressly approved by Waxess, or operation of this product in any way other than as detailed by the owner's manual, could void your authority to operate this product. our telephone complies with Part 68 of FCC Rules. You must, upon request, provide the FCC registration number and the REN to your telephone company. Both numbers are on the base unit.Note: You must not connect your phone to: • coin-operated systems• most electronic key telephone systemsThis device complies with Part 15, 22 (850 MHz GSM), 24 (1900 MHz GSM), and 68 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that D mode EVDO draft 1.book Page 64 Friday, January 12, 2007 8:18 PM
PrecautionsD Mode CT User Guide 65 Copyright © 2007 Waxess5may cause undesired operation. Privacy of communications, may not be ensured when using this phone.To insure the safety of users, the FCC has established criteria for the amount of radio frequency energy various products may produce depending on their intended usage. This product has been tested and found to comply with the FCC's exposure criteria. For body worn operation, the FCC RF exposure guidelines were also met when used with the accessories supplied or designed for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided.RangeYour new phone is designed to achieve the maximum possible range by transmitting and receiving according to the highest specifications set forth by the FCC. We have rated this phone to operate at a maximum distance with the qualification that the range depends upon the environment in which the telephone is used. Many factors limit range, and it would be impossible to include all the variables in our rating. The Maximum Range rating of this phone is meant to be used as a means of comparison against other range claims.D mode EVDO draft 1.book Page 65 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 66 Copyright © 2007 Waxess5Telephone Line ProblemsThe FCC has granted the telephone company the right to disconnect service in the event that your phone causes problems on the telephone line. Also, the telephone company may make changes in facilities and services which may affect the operation of your unit. However, your telephone company must give adequate notice in writing prior to such actions to allow you time for making necessary arrangements to continue uninterrupted service. If you are having trouble with your telephone service, you must first disconnect your phone to determine if it is the cause of your problem. If you determine that it is the cause, you must leave it disconnected until the trouble has been corrected.Radio InterferenceRadio interference may occasionally cause buzzing and humming in your cordless handset, or clicking noises in the base. This interference is caused by external sources such as TV, refrigerator, vacuum cleaner, fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and are too distracting, please check around your home to see what appliances may be causing the problem. In addition, we recommend that the base not be plugged into a circuit that also D mode EVDO draft 1.book Page 66 Friday, January 12, 2007 8:18 PM
PrecautionsD Mode CT User Guide 67 Copyright © 2007 Waxess5powers a major appliance because of the potential for interference. Be certain that the antenna on the unit is fully extended when needed. In the unlikely event that you consistently hear other voices or distracting transmissions on your phone, you may be receiving radio signals from another cordless telephone or other source of interference. If you cannot eliminate this type of interference, you need to change to a different channel. Finally, it should be noted that some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference.More than One Cordless TelephoneIf you want to use more than one cordless telephone in your home, they must operate on different channels. Press the channel key to select a channel that provides the clearest communication.D mode EVDO draft 1.book Page 67 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 68 Copyright © 2007 Waxess5Cordless Telephone PrivacyCordless telephones are radio devices. Communications between the handset and base of your cordless telephone are accomplished by means of radio waves which are broadcast over the open airways. Because of the inherent physical properties of radio waves, your communications can be received by radio receiving devices other than your own cordless telephone unit. Consequently, any communications using your cordless telephone may not be private.Installation ConsiderationsSELECTING A LOCATIONBefore choosing a location for your new phone, there are some important guidelines you should consider:• The location should be close to both a phone jack and continuous power outlet. (A continuous power outlet is an AC outlet which does not have a switch to interrupt its power.) • Keep the base and handset away from sources of electrical noise such as motors or fluorescent lighting.• Be sure there is sufficient space to fully extend the base antenna.• The base can be placed on a desk or tabletop or D mode EVDO draft 1.book Page 68 Friday, January 12, 2007 8:18 PM
PrecautionsD Mode CT User Guide 69 Copyright © 2007 Waxess5mounted on a standard telephone wall plate.• You should charge your new phone for 12–15 hours before completing the installation or using the handset.Telephone Line OutletsThere are two types of phone outlets:Modular JackMost phone equipment available now uses modular jacks. Phone cords are fitted with a molded plastic connector which plugs into this type of jack. If you do not have modular phone jacks, contact your local telephone company for information about their installation.Hardwired JackSome equipment is wired directly to a phone jack, and these types of installations require a modular jack converter. This type of installation is not difficult; however, you should contact your telephone dealer or a telephone supply store for advice about the proper adapter or converter for your particular situation.D mode EVDO draft 1.book Page 69 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 70 Copyright © 2007 Waxess5Connecting the Telephone CordsConsider these safety guidelines before connecting the telephone cords:Caution:• Never install telephone wiring during a lightning storm.• Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected.• Use caution when installing or modifying telephone lines.Applying Power to the baseThis phone requires an AC outlet, without a switch to interrupt power, and the included AC adapter. To relieve strain on the DC plug when the phone is placed on a desk or table, wrap the power cord around the strain relief notch on the bottom of the base.Note: Place the power cord so that it does not create a trip hazard, or where it could become chafed and create a fire or other electrical hazards.D mode EVDO draft 1.book Page 70 Friday, January 12, 2007 8:18 PM
PrecautionsD Mode CT User Guide 71 Copyright © 2007 Waxess5•I.C. NoticeTERMINAL EQUIPMENTNotice:This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.Notice:The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five.D mode EVDO draft 1.book Page 71 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 72 Copyright © 2007 Waxess5RADIO EQUIPMENTThe term "IC" before the radio certification number only signifies that Industry Canada technical specifications were met.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. “Privacy of communications may not be ensured when using this telephone.”D mode EVDO draft 1.book Page 72 Friday, January 12, 2007 8:18 PM
General informationD Mode CT User Guide 73 Copyright © 2007 Waxess66 General informationThis phone complies with FCC Parts 15 and 68.AC Adaptor Information:BaseModel AD-48091000Input voltage 120V AC, 60Hz. 0.3AOutput voltage 9V DC, 1000 mAChargerModel RGD41090500Input voltage 120V AC, 60 Hz, 0.15AOutput voltage 9V DC, 500 mABattery Information:Ni-MH, 3.6V, 1300mAFrequency:CDMA 800/1900 MHz EV-DOHandset/ Base 2.4GHzWeight:Handset 4.9 oz. (without battery)7.3 oz. (with battery)Base 1 lb., 13.7 oz. with corded handsetD mode EVDO draft 1.book Page 73 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 74 Copyright © 2007 Waxess6Dimensions:Handset 6-3/4” x 2” x 1-1/4” (height, width,depth) Base 3-1/4” x 7-3/4” x 7-7/8” (height, width, depth)FCC ID Number SNBDM1200ESpecifications, features, and availability of optional accessories are all subject to change without prior notice.Approved patents: 6,766,175. Patents pending: 09/991,296 and 10/156,439D mode EVDO draft 1.book Page 74 Friday, January 12, 2007 8:18 PM
D Mode CT Menu mapD Mode CT User Guide 75 Copyright © 2007 Waxess77D Mode CT Menu mapBASEMessagesVoicemailVoicemail SetupSMSWrite NewSavedIn BoxStorage StatusMemoryPhone bookFind nameAdd new entryCopy from SIMCaller IDRinger/Key BeepRinger toneRinger VolumeNight VolumeKey BeepSetupDistinctive RingArea CodeLanguageName the UnitTone/PulseBarge-InSignal LevelBattery LevelCellular OnlyLCD ContrastCEL Phone NumberTime and DateCORDLESS HANDSETMessagesVoicemailVoicemail SetupSMSWrite NewSavedIn BoxStorage StatusMemoryPhone bookFind nameAdd new entryCaller IDRinger/Key BeepRinger toneRinger VolumeNight VolumeKey BeepSetupDistinctive RingArea CodeLanguageName the UnitRegisterDeregisterLCD ContrastTime and DateD mode EVDO draft 1.book Page 75 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 76 Copyright © 2007 WaxessIndexbarge-in .................. 52quick reference chart ..................... 54set up................... 55use........................ 55base unit batteries ..... 4Ccallanswer landline ..... 26answer wireless..... 25conference call....... 30make landline call.. 23make wireless call.. 22caller ID................... 43delete number....... 46dial number........... 45information............ 43save number ......... 45CEL phone number... 57cellular only ............. 56set up.................... 56turn off.................. 56cordless handset .........8battery indicator.... 10charge the battery... 9install batteries........ 8Ddistinctive ring .. 32, 34Hhold..........................27Iincluded items ............1intercom...................48Llocation.......................1desk or tabletop .......2wall mount .............. 3MmessagesSMS ......................35check inbox........ 40delete a message.......... 41forward .............. 41memory status ... 42receive............... 40reply .................. 41save a new message............. 39send................... 39send a new message............. 39write .................. 38voice messages ..... 36check voicemail.. 36set up................. 36D mode EVDO draft 1.book Page 76 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 77 Copyright © 2007 Waxessmute....................... 27Ppage ....................... 47pause...................... 25phone book............. 30call from phonebook ........... 35enter characters ... 31enter numbers...... 32phonebookdistinctive ring...... 32edit names and numbers............... 33enter Caller ID numbers............... 33enter speed dial number ................ 35power on................... 4precautions............. 59Rredial...................... 24Ssafety instructions... 60set area codes............ 16dialing mode......... 11earpiece volume ... 23corded handset... 23cordless handset. 24speaker phone.... 23handset registration ........... 19deregister........... 20register .............. 19language............... 18ringer tone............ 14night volume ...... 15volume............... 15time and date........ 12unit name.............. 19signal level ................ 7specifications ........... 73speed dial................ 24standby screen .......... 6Ttext messages ......... 35transfer ................... 27two-line calling......... 49call waiting............ 52make calls............. 51quick reference chart..................... 50receive calls .......... 51D mode EVDO draft 1.book Page 77 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 78 Copyright © 2007 Waxess NotesD mode EVDO draft 1.book Page 78 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide 79 Copyright © 2007 Waxess NotesD mode EVDO draft 1.book Page 79 Friday, January 12, 2007 8:18 PM
D Mode CT User Guide Copyright © 2007 WaxessD mode EVDO draft 1.book Page 80 Friday, January 12, 2007 8:18 PM

Navigation menu