Weccan WECCAN-CAMERA 2.4G 4.5CH drone with camera User Manual
Weccan Industrial Limited 2.4G 4.5CH drone with camera Users Manual
Weccan >
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3031837 |
| Application ID | 6rMEKHrqIm7bNvjrNxx2qA== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 292.35kB (3654315 bits) |
| Date Submitted | 2016-06-17 00:00:00 |
| Date Available | 2016-06-17 00:00:00 |
| Creation Date | 2016-05-18 11:24:52 |
| Producing Software | Adobe Photoshop for Windows -- Image Conversion Plug-in |
| Document Lastmod | 2016-06-07 16:43:29 |
| Document Title | Users Manual |
| Document Creator | Adobe Illustrator CS6 (Windows) |
US_F1 6_FL_994_IM_A Size: A5 ( 1 C ) FLX SKY-l DHUNE'" COMORMS l0 ltff SAFETY 8+ limUlRtMrNTs 0r ASIM i963 917‘ 5’16 mm law no: mm mm 1075‘] as Introduction This Drone is an easy-to-fly. multifunction remote-control model that can hover. flip and fly in all directions and under different flight modes (Beginner. lntennediate and Advanced).Please read this manual carefully before operating this product. 1.Contents Drone with camera it 1 Remote control it 1 Requires 6 x AA batteries - not included) 4.3" LCD screen lor FPV x 1 USB cable for battery charging it 1 Data cable for SD card reading 0 LCD screen charging x 1 463 SD card it 1 Screwdriver x 1 Blades x 4 2.Transmitter necrwm mummy swan... Ml 7 7 # nuoirss woos \ ‘ mom nous wiser ’i 7, recur HUMMER Mom: 7 max rmwm Auro RFVURN oinscriou CONTROL Shot momma .. | . I: tumsrrrnrwen man RIGHT “Irwin L r ‘ i tun mom mwzn vowsn swrlcn Battery installation emf? Ii Irrtrlt 2.lnsta|| 6xAA batteries. following the correct polarities. 1.0pen the cover 3.0Iose the cover using screwdriver, Note: -Non-rechargeable batteries should not be recharged. -Only batteries of the same or equivalent type as recommended should be used. -Batteries should be inserted with the correct polarity. ‘Exhausted batteries should be removed from the toy. Do not mix the old and new batteries. -Please remove batteries when they are not in use. 3.Battery Charging of the Drone 1.Push the Drone's switch to "OFF". 2.Unscrew the screw of battery lid with the screwdriver (included in the accessory bag) 3.Press the battery lid of Drone; 4.Puil out the battery push it backwards and then wire from the power open the battery lid. port. 4.Connect the battery plug to the matching plug on the " included USB charger. then connect the USB charger to a USB power source. such as poweredon computer. When battery is charging. LED light is “ON": when fully charged. LED light is “OFF“. Charging time is about 100420 minutes. Caution: - Do not use or leave the battery near a heat source such as fire. This could cause damage. - The battery can only be charged with the included USB cable. - Do not disassemble the battery. - Never leave the battery unattended during charging. 4. Battery charging of the LCD screen Charge the LCD screen using the matching included USB cable. The indicator light on the LCD will turn red when charging and turn off when fully charged. Charging time is about 30-40 minutes. Note: Indicator light on LCD will flash when LCD is low on battery. user should turn off LCD before charging. 5. Ready to fly 1.0pen the battery lid and insert the 2.Rescrew the battery lid and turn "ON' 3.Tum on power switch of remote and battery connector the Drone's switch. push the left throttle into power port of Next, make sure to stick up and down. the Drone. place the Drone in Once frequency has a horizontal position. Do not move the Drone when indicator light is flashing. successfully paired. it will “beep" twice and the LED lights will stop flashing. Drone is now ready to fly. TIPS: 1. Keep the Drone in the horizontal position before flight. 2. Indoor flight: Please select spacious areas without obstacles, pets. or people. 3. Outdoor flight: Please select a warm. sunny day with no wind or breeze. Note: 1. Don‘t fly in extreme heat or cold. this could affect flight or damage the model. 2. Don't fly in strong wind. this could limit your flight or hinder flight control. In the case of strong wind. your Drone could become lost or damaged. 6. Taking off and auto hovering/landing 1) Taking off and auto hovering Upon pairing. press the taking off/landing button to make the blades rotate. then raise the left throttle/control stick to a certain position. causing the Drone to hover in the air. You do not need to control the throttle once it stabilizes. 2) Landing: Press the taking off/landing button and wait 2 seconds to allow the Drone to slowly auto drop for landing. 7. Control method 1 UP , A m ““9“"?- . . r94: 5 K: 4} Down Pushing the left control stick forward or backward will move the Drone up or down. Left rotation (fik Right rotation Pushing the left control stick to the left or right will make the Drone rotate left or right. AF“r r“ Backward IX” Pushing the right wntrol stick forward and backward will move the Drone forward or backward. c: -t _ __ Right movement Left movement Pushing the right control stick to the left or right will make the Drone lean left or right. Trim Adjustment Even after the Drone is calibrated, it may show a tendency to drift while airborne. Adjusting the trim will counter this effect and allow the unit to hover in place. Adjust the trim while flying in control and as low to the ground as possible. If the trim adjustments do not seem to be helping, or seem to be making the problem worse. press the Reset Button to the right of the Left Control Stick to reset the trim to tactory~default settings and try again. Lean Trimmer When the Drone loans to the left or right side during flight. you can adjust it by pressing the LEAN L/ R trimming buttons on the remote. Note: If Drone leans to the right. you must press the L LEAN button and if Drone loans to the left. you must press the R LEAN button. c: -t Left movement Right movement Turn Trimmer When the Drone rotates left or right during flight. you can adjust by pressing the TURN UR trimming buttons on the remote. Note: If Drone rotates to the right, you must press the L TURN button and if Drone rotates to the left. you must press the R TURN button. r—"l Left rotation ,J’V T ,\ Right rotation ‘ \ / .. .l, M ,, jg, ~ u 5/ A? 4 Forward and Backward Trimmer. When the Drone flies forward or backward. you can adjust by pressing the FRONT/ BACK trimming buttons. Note: If Drone flies forward. you must press the BACK button and if Drone flies backward. you must press the FRONT button. 77 I" Fonflard 2? ,l 2. Backward ‘g 8. Flight Mode The Drone has three flight modes: 30%. 60%. and 100%. The higher settings allow faster and more precise control inputs. It is recommended to start with the lowest setting. and as you become more skilled at flying. increase the sensitivity as you wish. - 30%: Intended for beginner pilots. This gives a smooth. more relaxed control feel. - 60%: Intended for intermediate pilots. The Drone will move and respond much faster to all control inputs. - 100%: Intended for advanced pilots. The Drone will be the fastest and most sensitive to all inputs. 9. Flips To set the Drone into flip mode. press down the right control stick until it beeps. Operate the right control stick forward. backward, left or right, to flip the Drone in each of these directions. Do not attempt to do a flip unless the Drone is 4 feet (1.2 meters) high. to avoid any potential damage. Left flip To make the Drone flip one full circle to the left, press down the right control stick until it beeps. then push the stick to the left. Right flip To make the Drone flip one full circle to the right. press down the right control stick until it beeps. then push the stick to the right. Forward flip To make the Drone flip one full circle forward. press down the right control stick until it beeps. then push the stick forward. Backward flip To make the Drone flip one full circle backward. press down the right control slick until it beeps. then push the slick backward. 10. Reset function To set the Drone back to its default factory setting. press the reset button. 11. Headless mode 1). Turning on headless mode: In headless mode. the Drone has the ability to fly from your viewpoint regardless of its orientation. Upon pairing. place the Drone on the ground or keep it hovering in the air. then press the headless mode button. The Drone will go into headless mode. now you can fly it toward you by pulling down the right lever and fly it away from you by pushing up the right lever. Turning off headless mode: Press the headless mode button again to exit out of this function. 12. Auto Return: [“1 Press the auto return button and the Drone will return ..... to you automatically. but make sure not to move. Once the drone is close to you. press the auto return button once again to stop the Drone in its place. 1O 13. LCD Screen and Camera Use , Connect the camera underneath the Drone and ensure the camera plug is secure to its body. (4GB Micro SD Card must be placed in the camera slot). Next, turn on the Drone and LCD screen. Once the Drone and LCD screen have paired you will be able to watch the Video on screen in real time. 1). Recording videos or pictures: , Install SD card into the slot on the back of the camera. - Turn on LCD screen and Drone. - Press the “REC" button to record your video. Note: The word “REC" word Will flicker in red on the screen. This indicates that it is recording a video. Press “REC" again to stop recording. - Press the ”SNAP" button to take a picture Note: The word “JPG” will appear on the screen. This indicates that it is taking a picture. 2). Viewing videos and pictures on LCD screen: - Remove SD card from the camera and insert into the card slot on the LCD screen, noting the correct direction. Do not force it in; it will not fit in the opposite direction. - Turn on the screen, then press “VlEW” to View videos and pictures. 3). Uploading Images and Videos to computer - When SD card is inserted in the camera under Drone, you can upload images and videos to your computer by connecting USB cable to micro port in camera ( see image 1) - When SD card is inserted in the LCD slot. you can upload images and videos to your computer by connecting USB cable to micro port in LCD. (see image 2) 14. Troubleshooting 1.Transmitter cannot control the Drone. Solution: Make sure that pairing is successful. 11 2.Gyro doesn't work well. Solution 1): Battery voltage is too low. Replace the batten! with a new one. 2): Re-pair 3): Make sure the Drone is in the horizontal position. 3.Unable to flip. Solution: check if battery power is too low and needs to be recharged. 4.Drone is shacking with noise. Solution: Check to make sure the motors, shell, case and propellers are all properly installed. 5.Drone doesn’t take off. Solution 1): check whether the installation of blades is correct or not. 2): Make sure Drone's shell is not loose. 3): Make sure Drone’s battery is fully charged. 6.Blades get damaged after a crash Solution: replace them with the spare blades in the accessories bag. To replace a blade, use a small Phillipsahead screwdriver (included in the Accesa sories bag) and remove the screw connecting the blade to the electric motor shaft. Remove the damaged blade and replace With a new one, then screw it back into place on the motor shaft. REMINDER: It is extremely important to use the correct blade (A or a) ror replacement. Using the incorrect blade will cause the drone's flight to be erratic and impossible to control. Follow the marking on the top of the blade. See image below From Warning: Please fly away trom obstructions such as people, buildings, high-voltage power lines, etc.. Also avoid flying during extreme weather conditions such as rain, hail, sleet, snow, thunder or heavy winds. mam. wllvltuwm m t5 arm rcc mu. ou-m. Indira-om lotto-mu com-an. alumna my not an; arm. manna ... U)». a..- mat-am, mum... a... mating Irmflu-mx m nan... mid-ind coir-Itch CAJTlON changesuimodificationsrio'expiesslyappiwed wrapam 'espurisaelc'm'ripliarim cm vac l'euss‘szuihairt)"ucpera'e'heequipmerrl i"! rurinrrs may cusnnzmnti inlerirwrree lbraflinznn'riuriica inns new nm S rogue hami'uliri'zflemric:'l7radicni'elevisinhreceplo' nnic- m- beae'eirr 'mh - tdlwrirrn measures Rcvhcril vr inhale the mummy antenna lhcizas: lh: sanmtmnuman lh: zuuivr‘ieh'and mam Enmectthe equipmen-in-aan aulle'cri arnui-tnanenmon thatwnuntha iezeiveiiswririezled cansunmc teal vr cincncncct radio w 'nmniniah ‘ni nnin 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2016:05:18 11:24:52+09:00 Creator : Adobe Illustrator CS6 (Windows) Modify Date : 2016:06:07 16:43:29+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : 网络版说名书22222 Metadata Date : 2016:06:07 16:43:29+08:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Format : JPEG Thumbnail Height : 256 Thumbnail Width : 75 Thumbnail Image : (Binary data 7546 bytes, use -b option to extract) Instance ID : uuid:3f099120-f6e6-43e4-a587-b8eafd73e137 Document ID : xmp.did:1D7E5520981CE611BE19EE65D2C8483C Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:ef89aaea-a67d-4764-940f-779264fbd717 Derived From Document ID : xmp.did:1D7E5520981CE611BE19EE65D2C8483C Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved, converted, derived, saved, saved History Instance ID : xmp.iid:167E5520981CE611BE19EE65D2C8483C, xmp.iid:1D7E5520981CE611BE19EE65D2C8483C, xmp.iid:CE30F2A0A71CE61185DBB6B410F3565C, xmp.iid:CF30F2A0A71CE61185DBB6B410F3565C History When : 2016:05:18 10:25:37+08:00, 2016:05:18 11:24:32+08:00, 2016:05:18 11:26+08:00, 2016:05:18 11:26:43+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows), Adobe Photoshop CS6 (Windows), Adobe Photoshop CS6 (Windows) History Changed : /, /, /, / History Parameters : from application/pdf to application/vnd.adobe.photoshop, converted from application/vnd.adobe.photoshop to application/pdf Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : False N Pages : 1 Max Page Size W : 364.066667 Max Page Size H : 1248.444899 Max Page Size Unit : Millimeters Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 明亮 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe Photoshop for Windows -- Image Conversion Plug-in Color Mode : RGB Page Count : 2 Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)EXIF Metadata provided by EXIF.tools