Wedge it com HHR1 AP router User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2447222
Application ID	ZRWOffW51yCc454NOrdbLQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	244.78kB (3059748 bits)
Date Submitted	2014-11-18 00:00:00
Date Available	2015-01-02 00:00:00
Creation Date	2014-08-26 15:09:45
Producing Software	Acrobat Distiller 10.1.8 (Windows)
Document Lastmod	2014-11-14 11:31:47
Document Title	Microsoft Word - Manual_STD_RE300R4-2T2R-V13_Eng_1408191335.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Candy

11n AP Router User’s Manual
802.11n WLAN
AP Router
User’s Manual
11n AP Router User’s Manual
Table of Contents
Introduction...........................................................6
Features ................................................................................. 6
Device Requirements ............................................................ 6
Using this Document.............................................................. 7
Notational conventions .................................................. 7
Typographical conventions ............................................ 7
Special messages .......................................................... 7
Getting Support ...................................................................... 7
Getting to know the device...................................8
Computer / System requirements ......................................... 8
Package Contents.................................................................. 8
LED meanings & activations.................................................. 8
Top Side ......................................................................... 8
Rear and Left Panel and bottom Side ........................... 9
Computer configurations under
different OS, to obtain IP address
automatically ......................................................10
For Windows 98SE / ME / 2000 / XP ..................................10
For Windows Vista-32/64 ....................................................14
For Windows 7-32/64...........................................................19
For Windows 8-32/64...........................................................24
Connecting your device .....................................29
Connecting the Hardware ....................................................29
Advanced Configuration.....................................31
Advanced Configuration with Router Mode ........................31
Wireless Connection ............................................................35
What the Internet/WAN access of your
own Network now is ...........................................38
Internet/WAN access is the DHCP client ............................40
Internet/WAN access is the Static IP...................................41
Internet/WAN access is the PPPoE client...........................43
Getting Started with the Web pages ..................44
Accessing the Web pages ...................................................44
Testing your Setup ...............................................................46
Default device settings .........................................................46
Quick Setup........................................................48
Static IP ........................................................................49
11n AP Router User’s Manual
Dynamic IP ...................................................................50
PPPoE ..........................................................................51
Wireless Basic Setup ...........................................................52
Finish the Quick Setup.........................................................53
LAN Interface .....................................................54
LAN Interface Setup.............................................................54
Changing the LAN IP address and subnet
mask ..................................................................................56
DHCP Static IP Configuration..............................................59
10
Internet Setup .....................................................61
Configuring Static IP connection .........................................64
Configuring DHCP Client connection ..................................65
Configuring PPPoE connection ...........................................66
Clone MAC Address ............................................................67
11
IPv6 ....................................................................68
Wireless Basics ....................................................................68
12
Wireless Network ...............................................69
Wireless Basics ....................................................................69
Wireless Multiple BSSID Settings .......................................71
WPS Setup...........................................................................73
Wireless Advanced Settings ................................................74
Wireless Access Control Mode ...........................................75
Allow Listed ..................................................................76
Wireless Repeater ...............................................................78
13
Access Control List Configuration ......................81
Access Control List Config...................................................81
14
Port Triggering....................................................82
Port Triggering Config ..........................................................82
15
URL Blocking .....................................................83
URL Blocking for specified URL Address ...........................84
16
Dynamic DNS.....................................................86
Configure DynDNS ..............................................................89
Configure TZO .....................................................................91
17
QoS ....................................................................93
18
UPnP ..................................................................94
19
Virtual Server......................................................95
Configuring Virtual Server....................................................95
Configuring custom applications .........................................96
Virtual Server for FTP ..................................................97
11n AP Router User’s Manual
Port Forwarding for HTTP ...........................................99
Deleting custom applications .....................................101
20
Reboot/Reset ...................................................102
Reboot/Reset .....................................................................102
21
Firmware Upgrade ...........................................103
About firmware versions ....................................................103
Manually updating firmware...............................................103
22
Backup/Restore Settings .................................105
Save Settings to File ..........................................................105
Load Settings from File ......................................................106
23
Password .........................................................108
Setting your username and password ..............................108
24
Time and Date..................................................110
Time and Date Configuration settings ...............................110
25
Status ...............................................................112
26
Active Client Table ...........................................113
27
Statistics ...........................................................114
28
IPV6..................................................................115
Configuring your Computers ............................116
Configuring Ethernet PCs ..................................................116
Before you begin ........................................................116
Windows® XP PCs ....................................................116
Windows 2000 PCs ...................................................116
Windows Me PCs ......................................................118
Windows 95, 98 PCs .................................................118
Windows NT 4.0 workstations ...................................119
Assigning static Internet information to
your PCs .................................................................120
IP Addresses, Network Masks, and
Subnets ............................................................121
IP Addresses ......................................................................121
Structure of an IP address .........................................121
Network classes .........................................................121
Subnet masks ....................................................................122
UPnP Control Point Software on
Windows ME/XP ..............................................124
UPnP Control Point Software on Windows ME ................124
UPnP Control Point Software on Windows XP
with Firewall .....................................................................125
11n AP Router User’s Manual
SSDP requirements ...................................................125
Troubleshooting ...............................................128
Troubleshooting Suggestions ............................................128
Diagnosing Problem using IP Utilities ...............................130
ping .............................................................................130
nslookup .....................................................................130
Glossary ...........................................................132
11n AP Router User’s Manual
Introduction
Congratulations on becoming the owner of the Wireless
Gateway. You will now be able to access the Internet using your
high-speed xDSL/Cable modem connection.
This User Guide will show you how to connect your Wireless
Gateway, and how to customize its configuration to get the most
out of your new product.
Features
The list below contains the main features of the device and may
be useful to users with knowledge of networking protocols. If
you are not an experienced user, the chapters throughout this
guide will provide you with enough information to get the most
out of your device.
Features include:
•
10/100Base-T Ethernet router to provide Internet
connectivity to all computers on your LAN
•
Network address translation (NAT) functions to provide
security for your LAN
•
Network configuration through DHCP Server and DHCP
Client
•
Services including IP route and DNS configuration, RIP,
and IP
•
Supports remote software upgrades
•
User-friendly configuration program accessed via a web
browser
The Wireless Gateway has the internal Ethernet switch
allows for a direct connection to a 10/100BASE-T Ethernet
network via an RJ-45 interface, with LAN connectivity for
both the Wireless Gateway and a co-located PC or other
Ethernet-based device.
Device Requirements
In order to use the Wireless Gateway, you must have the
following:
•
One RJ-45 Broadband Internet connection via cable
modem or xDSL modem
•
Instructions from your ISP on what type of Internet access
you will be using, and the addresses needed to set up access
•
One or more computers each containing an Ethernet card
(10Base-T/100Base-T network interface card (NIC))
•
TCP/IP protocol for each PC
•
For system configuration using the supplied
a. web-based program: a web browser such as Internet
Explorer v4 or later, or Netscape v4 or later. Note that
version 4 of each browser is the minimum version
11n AP Router User’s Manual
requirement – for optimum display quality, use Internet
Explorer v5, or Netscape v6.1
You do not need to use a hub or switch in order to connect more
than one Ethernet PC to your device. Instead, you can connect
up to four Ethernet PCs directly to your device using the ports
labeled Ethernet on the rear panel.
Note
Using this Document
Notational conventions
•
Acronyms are defined the first time they appear in the text
and also in the glossary.
•
For brevity, the Wireless Gateway is referred to as “the device”.
•
The term LAN refers to a group of Ethernet-connected
computers at one site.
Typographical conventions
•
Italic text is used for items you select from menus and dropdown lists and the names of displayed web pages.
•
Bold text is used for text strings that you type when prompted
by the program, and to emphasize important points.
Special messages
This document uses the following icons to draw your attention to
specific instructions or explanations.
Note
Definition
WARNING
Provides clarifying or non-essential information on the current
topic.
Explains terms or acronyms that may be unfamiliar to many
readers. These terms are also included in the Glossary.
Provides messages of high importance, including messages
relating to personal safety or system integrity.
Getting Support
Supplied by:
Helpdesk Number:
Website:
11n AP Router User’s Manual
Getting to know the device
Computer / System requirements
•
1. Pentium 200MHZ processor or above
•
2. Windows 98SE, Windows Me, Windows 2000, Windows
XP, Windows Vista, Windows 7 and Windows 8
•
3. 64MB of RAM or above
•
4. 25MB free disk space
Package Contents
1. 11n AP Router
2. CD-ROM (Software & Manual)
3. Quick Installation Guide
4. Ethernet Cable (RJ-45)
5. Power Adapter
LED meanings & activations
Top Side
The Top Side contains lights called Light Emitting Diodes (LEDs)
that indicate the status of the unit.
Figure 1:
Top Side and LEDs
Label
Color
Function
POWER
green
On: device is powered on
Off: device is powered off
WAN
green
On: WAN link established and active
Off: No LAN link
Blink: Valid Ethernet packet being transferred
WLAN
green
On: WLAN link established and active
Blink: Valid Wireless packet being transferred
WPS
green
Off: WPS link isn’t established and active
Blink: Valid WPS packet being transferred
LAN
green
On: LAN link established and active
Off: No LAN link
Blink: Valid Ethernet packet being transferred
11n AP Router User’s Manual
Rear and Left Panel and bottom Side
The rear and right panel and bottom side contains a Restore
Defaults button, the ports for the unit's data and power
connections.
Label
Function
DC 9V
Connects to the supplied power adaptor
LAN
Connects the device via LAN Ethernet to a PC
WAN
Connects the device via WAN Ethernet to xDSL /
Cable Modem
WLAN
Press this button for at least two full second to turn
off/on wireless signals
WPS
WPS
Press this button for 3,4,5, or 6 full seconds
and the WPS LED will flash to start WPS.
Now go to the wireless adapter or device and
press its WPS button. Make sure to press the
button within 120 seconds (2 minutes) after
pressing the router's WPS button.
RESET
RESET
Reset button. RESET the 11n AP Router to its default
settings.
Press this button for at least 7 full seconds
to RESET device to its default settings.
11n AP Router User’s Manual
Computer configurations under different OS,
to obtain IP address automatically
Before starting the 11n AP Router configuration, please kindly
configure the PC computer as below, to have automatic IP
address / DNS Server.
For Windows 98SE / ME / 2000 / XP
1. Click on "Start" -> "Control Panel" (in Classic View). In
the Control Panel, double click on "Network Connections"
to continue.
10
11n AP Router User’s Manual
2. Single RIGHT click on "Local Area connection", then click
"Properties".
11
11n AP Router User’s Manual
3. Double click on "Internet Protocol (TCP/IP)".
12
11n AP Router User’s Manual
4. Check "Obtain an IP address automatically" and "Obtain
DNS server address automatically" then click on "OK" to
continue.
5. Click "Show icon in notification area when connected"
(see screen image in 3. above) then Click on "OK" to
complete the setup procedures.
13
11n AP Router User’s Manual
For Windows Vista-32/64
1. Click on “Start” -> “Control Panel” -> “View network
status and tasks”.
14
11n AP Router User’s Manual
2. In the Manage network connections, click on “Manage
network connections” to continue.
15
11n AP Router User’s Manual
3. Single RIGHT click on "Local Area connection", then click
"Properties".
16
11n AP Router User’s Manual
4. The screen will display the information "User Account
Control" and click "Continue" to continue.
5. Double click on "Internet Protocol Version 4 (TCP/IPv4)".
17
11n AP Router User’s Manual
6. Check "Obtain an IP address automatically" and "Obtain
DNS server address automatically" then click on "OK" to
continue.
18
11n AP Router User’s Manual
For Windows 7-32/64
7. Click on “Start” -> “Control Panel” (in Category View) ->
“View network status and tasks”.
19
11n AP Router User’s Manual
8. In the Control Panel Home, click on “Change adapter
settings” to continue.
20
11n AP Router User’s Manual
9. Single RIGHT click on “Local Area Connection”, then click
“Properties”.
21
11n AP Router User’s Manual
10. Double click on "Internet Protocol Version 4 (TCP/IPv4)".
22
11n AP Router User’s Manual
11. Check "Obtain an IP address automatically" and "Obtain
DNS server address automatically" then click on "OK" to
continue.
23
11n AP Router User’s Manual
For Windows 8-32/64
1. Move the mouse or tap to the upper right corner and click
on “Settings”.
24
11n AP Router User’s Manual
2. Click on “Control Panel”.
25
11n AP Router User’s Manual
3. Click on “View network status and tasks”.
4. In the Control Panel Home, click on “Change adapter
settings” to continue.
26
11n AP Router User’s Manual
5. Single RIGHT click on “Ethernet", then click "Properties".
6. Double click on "Internet Protocol Version 4 (TCP/IPv4)".
27
11n AP Router User’s Manual
7. Check "Obtain an IP address automatically" and “Obtain
DNS server address automatically” then click on "OK" to
continue.
28
11n AP Router User’s Manual
Connecting your device
This chapter provides basic instructions for connecting the
Wireless Gateway to a computer or LAN and to the Internet.
In addition to configuring the device, you need to configure the
Internet properties of your computer(s). For more details, see
the following sections:
•
Configuring Ethernet PCs
This chapter assumes that you have already established a
DSL/Cable service with your Internet service provider (ISP).
These instructions provide a basic configuration that should be
compatible with your home or small office network setup. Refer
to the subsequent chapters for additional configuration
instructions.
Connecting the Hardware
This section describes how to connect the device to the wall
phone port, the power outlet and your computer(s) or network.
WARNING
Before you begin, turn the power off for all devices. These
include your computer(s), your LAN hub/switch (if applicable),
and the Wireless Gateway.
The diagram below illustrates the hardware connections. The
layout of the ports on your device may vary from the layout
shown. Refer to the steps that follow for specific instructions.
29
11n AP Router User’s Manual
Step 1. Connect the Ethernet cable to WAN Port
Connect the RJ45 Ethernet cable from your xDSL/Cable
Modem's Ethernet port to 11n AP Router 's WAN Port.
Step 2. Connect the Ethernet cable to LAN Port
Connect the supplied RJ45 Ethernet cable from your PC's
Ethernet port to any of the 11n AP Router Router's LAN
Port.
Step 3. Attach the power connector
Connect the power adapter to the power inlet POWER of
your 11n AP Router.
30
11n AP Router User’s Manual
Advanced Configuration
Advanced Configuration with Router Mode
1. From any of the LAN computers connected to , launch your
web browser, type the following URL in the web address (or
location) box, and press [Enter] on your keyboard:
http://10.0.0.2
2. Select the Connect type DHCP, Static or PPPoE and enter
related parameters that your ISP (Internet Services Provider)
or Network Administrator provided.
3. Please enter the “SSID” if you want to change (the default
settings SSID = 11n_APxxxx which could be found on
the bottom side of the device).
4. Please enter your own wireless password at least 8
characters for example 12345678 in the Key field /
Network key field (the Encryption type = WPA/WPA2PSK AES).
5. Click on “Save” button.
31
11n AP Router User’s Manual
Examples
DHCP (Dynamic IP)
Select DHCP
Please enter the SSID if you want to change (the default
settings SSID = 11n_APxxxx which could be found on the
bottom side of the device).
Please enter your own wireless password at least 8 characters
for example 12345678 in the Key field / Network key field (the
Encryption type = WPA/WPA2-PSK AES).
Click on Save button
32
11n AP Router User’s Manual
PPPoE
Select PPPoE Mode
Enter Username and Password offered by the ISP
Please enter the SSID if you want to change (the default
settings SSID = 11n_APxxxx which could be found on the
bottom side of the device).
Please enter your own wireless password at least 8 characters
for example 12345678 in the Key field / Network key field (the
Encryption type = WPA/WPA2-PSK AES).
Click on Save button
33
11n AP Router User’s Manual
Static IP
Select Static IP
Config IP Address, Subnet mask, Default Gateway and DNS
Server offered by ISP (Internet Services Provider) or Network
Administrator
Please enter the SSID if you want to change (the default
settings SSID = 11n_APxxxx which could be found on the
bottom side of the device).
Please enter your own wireless password at least 8 characters
for example 12345678 in the Key field / Network key field (the
Encryption type = WPA/WPA2-PSK AES).
Click on Save button
34
11n AP Router User’s Manual
6. Please enter the Login User Name: admin and Login
Password: administrator and then click on Login button.
7. Now, the 11n AP Router has been configured completed,
and suitable for Wireless and Internet Connections.
Wireless Connection
For easy installation it is saved to keep the settings. You can
later change the wireless settings via the wireless configuration
menu. (see user manual on the CD – Chapter 12).
8. Double click on the wireless icon on your computer and
search for the wireless network that you enter SSID name.
35
11n AP Router User’s Manual
9. Click on the wireless network that you enter SSID name
(the default settings SSID = 11n_APxxxx which could
be found on the bottom side of the device) to connect.
10. If the wireless network isn’t encrypted, click on "Connect
Anyway" to connect.
36
11n AP Router User’s Manual
11. If the wireless network is encrypted, enter your own
wireless password at least 8 characters for example
12345678 in the key field / Network key field / Confirm
Network key field (the default settings Security Mode =
None). You can later change this network key via the
wireless configuration menu. (see user manual on the CD –
Chapter 12).
12. Click on "Connect" or "Apply".
13. Now you are ready to use the Wireless Network to Internet
or intranet.
37
11n AP Router User’s Manual
What the Internet/WAN access of your own
Network now is
Now you could check what the Internet/WAN access of your
network is to know how to configure the WAN port of Wireless
Gateway.
Please follow steps below to check what the Internet/WAN
access if your own Network is DHCP Client, Static IP or PPPoE
Client.
1. Click Start -> Control Panel
38
11n AP Router User’s Manual
2. Double click Network Connections
39
11n AP Router User’s Manual
Internet/WAN access is the DHCP client
If you cannot see any Broadband Adapter in the Network
Connections, your Internet/WAN access is DHCP Client or
Static IP.
3. Click Local Area Connection in LAN or High-Speed
Internet and you could see string Assigned by DHCP in
Details.
40
11n AP Router User’s Manual
Internet/WAN access is the Static IP
If you cannot see any Broadband Adapter in the Network
Connections, your Internet/WAN access is DHCP Client or
Static IP.
4. Click Local Area Connection in LAN or High-Speed
Internet and you could see string Manually Configured in
Details.
41
11n AP Router User’s Manual
5. Right click Local Area Connection and click Properties
and then you could get the IP settings in detail and write
down the IP settings as follow:
IP Address: 192.168.10.110
Subnet mask: 255.255.255.0
Default gateway: 192.168.10.100
Preferred DNS server: 192.168.10.100
Alternate DNS Server: If you have it, please also write it
down.
42
11n AP Router User’s Manual
Internet/WAN access is the PPPoE client
If you can see any Broadband Adapter in the Network
Connections, your Internet/WAN access is PPPoE Client.
6. Click Broadband Adapter in Broadband and you could
see string Assigned by Service Provider in Details.
For PPPoE configuration on Wireless Gateway, you’ll need
following information that you could get from your Telecom, or
by your Internet Service Provider.
Username of PPPoE: 1234 for example
Password of PPPoE: 1234 for example
43
11n AP Router User’s Manual
Getting Started with the Web pages
The Wireless Gateway includes a series of Web pages that
provide an interface to the software installed on the device. It
enables you to configure the device settings to meet the needs
of your network. You can access it through your web browser
from any PC connected to the device via the LAN ports.
Accessing the Web pages
To access the Web pages, you need the following:
•
A PC or laptop connected to the LAN port on the device.
•
A web browser installed on the PC. The minimum browser
version requirement is Internet Explorer v4 or Netscape v4.
For the best display quality, use latest version of Internet
Explorer, Netscape or Mozilla Fire fox. From any of the LAN
computers, launch your web browser, type the following
URL in the web address (or location) box, and press [Enter]
on your keyboard:
http://10.0.0.2
The Status homepage for the web pages is displayed:
Figure 2:
Homepage
The first time that you click on an entry from the lefthand menu, a login box is displayed. You must enter
your username and password to access the pages.
44
11n AP Router User’s Manual
A login screen is displayed:
Figure 3:
Login screen
1. Enter your user name and password. The first time you log
into the program, use these defaults:
Note
User Name:
admin
Password:
administrator
You can change the password at any time or you can configure your
device so that you do not need to enter a password. See Password.
2. Click on OK. You are now ready to configure your device.
This is the first page displayed each time you log in to the Web
pages.
Note
If you receive an error message or the Welcome page is not
displayed, see Troubleshooting Suggestions.
45
11n AP Router User’s Manual
Testing your Setup
Once you have connected your hardware and configured your
PCs, any computer on your LAN should be able to use the DSL
/Cable connection to access the Internet.
To test the connection, turn on the device, wait for 30 seconds
and then verify that the LEDs are illuminated as follows:
Table 1. LED Indicators
Label
Color
Function
POWER
green
On: device is powered on
Off: device is powered off
WLAN
green
On: WLAN link established and active
Blink: Valid Wireless packet being transferred
WAN
green
On: WAN link established and active
Off: No LAN link
Blink: Valid Ethernet packet being transferred
LAN
green
On: LAN link established and active
Off: No LAN link
Blink: Valid Ethernet packet being transferred
If the LEDs illuminate as expected, test your Internet connection
from a LAN computer. To do this, open your web browser, and
type the URL of any external website (such as
http://www.yahoo.com). The LED labeled WAN should blink
rapidly and then appear solid as the device connects to the site.
If the LEDs do not illuminate as expected, you may need to
configure your Internet access settings using the information
provided by your ISP. For details, see Internet Access. If the
LEDs still do not illuminate as expected or the web page is not
displayed, see Troubleshooting Suggestions or contact your
ISP for assistance.
Default device settings
In addition to handling the xDSL / Cable modem connection to
your ISP, the Wireless Gateway can provide a variety of
services to your network. The device is preconfigured with
default settings for use with a typical home or small office
network.
The table below lists some of the most important default settings;
these and other features are described fully in the subsequent
chapters. If you are familiar with network configuration, review
these settings to verify that they meet the needs of your network.
Follow the instructions to change them if necessary. If you are
unfamiliar with these settings, try using the device without
modification, or contact your ISP for assistance.
WARNING
We strongly recommend that you contact your ISP prior to
changing the default configuration.
46
11n AP Router User’s Manual
Option
Default Setting
Explanation/Instructions
WAN Port IP
Address
DHCP Client
This is the temporary public IP address of the WAN
port on the device. It is an unnumbered interface that
is replaced as soon as your ISP assigns a ‘real’ IP
address. See Network Settings -> WAN Interface.
LAN Port
IP Address
Assigned static IP address:
10.0.0.2
This is the IP address of the LAN port on the device.
The LAN port connects the device to your Ethernet
network. Typically, you will not need to change this
address. See Network Settings -> LAN Interface.
Subnet mask:
255.255.255.0
DHCP (Dynamic
Host Configuration
Protocol)
DHCP server enabled with the
following pool of addresses:
10.0.0.2
through
10.0.0.254
The Wireless Gateway maintains a pool of private IP
addresses for dynamic assignment to your LAN
computers. To use this service, you must have set up
your computers to accept IP information dynamically,
as described in Configuring Ethernet PCs.
47
11n AP Router User’s Manual
Quick Setup
The Quick Setup page displays useful information about the
setup of your device, including:
•
details of the device’s Internet access settings
•
details of the device’s VoIP settings
•
details of the device’s Wireless settings
To display this page:
From the head menu, click on Setup. The following page is
displayed:
Figure 4:
Quick Setup page
WAN Connection Type
This page is used to configure the parameters for Internet
network which connects to the WAN port of your Access Point.
Here you may change the access method to static IP, Dynamic
IP or PPPoE by click the item value of WAN Connection Type.
To change the WAN Connection Type:
3. From the WAN Connection Type, select static IP, Dynamic
IP or PPPoE setting determined by your Network
Administrator or ISP.
4. Click Next.
48
11n AP Router User’s Manual
Static IP
In this mode, the device is supposed to connect to internet via
ADSL/Cable Modem. The NAT is enabled and PC in
LAN/WLAN port share the same IP to ISP through WAN port.
The connection type can be setup in WAN page by using static
IP.
1. From the WAN Connection Type, select Static IP setting
determined by your Network Administrator or ISP.
2. Click Next.
3.
4.
5.
6.
7.
Enter IP Address for example 172.1.1.1.
Enter Subnet Mask for example 255.255.255.0.
Enter Default Gateway for example 172.1.1.254.
Enter Primary DNS for example 172.1.1.254.
Click Next.
49
11n AP Router User’s Manual
Dynamic IP
In this mode, the device is supposed to connect to internet via
ADSL/Cable Modem. The NAT is enabled and PCs in
LAN/WLAN port share the same IP to ISP through WAN port.
The connection type can be setup in WAN page by using
Dynamic IP.
1. From the WAN Connection Type, select Dynamic IP setting
determined by your Network Administrator or ISP.
2. Click Next.
50
11n AP Router User’s Manual
PPPoE
In this mode, the device is supposed to connect to internet via
ADSL/Cable Modem. The NAT is enabled and PCs in four LAN
ports share the same IP to ISP through WAN port. The
connection type can be setup in WAN page by using PPPoE.
1. From the WAN Connection Type drop-down list, select
PPPoE setting determined by your Network Administrator
or ISP.
2. Click Next.
3.
4.
5.
6.
Enter User Name for example 1234.
Enter Password for example 1234.
Enter Confirm Password for example 1234.
Click Next.
51
11n AP Router User’s Manual
Wireless Basic Setup
This page is used to configure the parameters for wireless LAN
clients which may connect to your Access Point.
7.
8.
9.
10.
Enter SSID for example 11n_AP_Router.
From the Channel drop-down list, select a Channel.
From the Mode drop-down list, select a Mode.
From the Channel Width drop-down list, select a Channel
Width.
11. From the Wireless Security, select a Security and enter the
key if any.
12. Click Next.
52
11n AP Router User’s Manual
Finish the Quick Setup
This page is used to finish the all the settings of Quick Setup.
13. Click Finish.
53
11n AP Router User’s Manual
LAN Interface
This chapter is to configure the parameters for local area
network which connects to the LAN port of your Access Point.
Here you may change the setting for IP address, subnet mask,
DHCP, etc...
Note
You should only change the addressing details if your ISP asks
you to, or if you are familiar with network configuration. In most
cases, you will not need to make any changes to this
configuration.
LAN Interface Setup
To check the configuration of LAN Interface:
1. From the Setup menu, click on Local Network. The
following page is displayed:
54
11n AP Router User’s Manual
Field
IP Address
Description
The IP address of your router on the local area network. Your local
area network settings are based on the address assigned here.
Subnet Mask
The subnet mask of your router on the local area network.
DHCP Mode
Once your router is properly configured and DHCP Server is
enabled, the DHCP Server will manage the IP addresses and other
network configuration information for computers and other devices
connected to your Local Area Network. There is no need for you to
do this yourself.
The computers (and other devices) connected to your LAN also
need to have their TCP/IP configuration set to "DHCP" or "Obtain an
IP address automatically".
IP Pool Range
These two IP values (from and to) define a range of IP addresses
that the DHCP Server uses when assigning addresses to computers
and devices on your Local Area Network. Any addresses that are
outside of this range are not managed by the DHCP Server; these
could, therefore, be used for manually configured devices or
devices that cannot use DHCP to obtain network address details
automatically.
Your router, by default, has a static IP address of 192.168.0.1. This
means that addresses 192.168.0.2 to 192.168.0.254 can be made
available for allocation by the DHCP Server.
Max Lease Time
The amount of time that a computer may have an IP address before
it is required to renew the lease. The lease functions just as a lease
on an apartment would. The initial lease designates the amount of
time before the lease expires. If the tenant wishes to retain the
address when the lease is expired then a new lease is established. If
the lease expires and the address is no longer needed then another
tenant may use the address.
Domain Name
Domain name for the dhcp server scope.
DNS Servers
DNS Server address for the dhcp server scope.
IP Address
Mac Address
The IP address to be configured for your computer or device on the
local area network.For example, 192.168.0.2.
The mac address of your computer or device on the local area
network.
55
11n AP Router User’s Manual
Changing the LAN IP address and subnet mask
To Change the configuration of LAN Interface:
1. From the Setup menu, click on Local Network. The
following page is displayed:
56
11n AP Router User’s Manual
2. Change the IP Address and Subnet Mask.
3. Click Apply Changes.
4. Click OK.
5. Type IP Address and Change default LAN port IP address.
6. Click in the IP Address and Subnet Mask box and type a
new IP Address and Subnet Mask.
7. Change the default DHCP Client Range.
8. Click Apply Changes.
57
11n AP Router User’s Manual
You may also need to renew your DHCP lease:
Windows 95/98
a. Select Run... from the Start menu.
b. Enter winipcfg and click OK.
c. Select your ethernet adaptor from the pull-down menu
d. Click Release All and then Renew All.
e. Exit the winipcfg dialog.
Windows NT/Windows 2000/Windows XP
a. Bring up a command window.
b. Type ipconfig /release in the command window.
c. Type ipconfig /renew.
d. Type exit to close the command window.
Linux
a. Bring up a shell.
b. Type pump -r to release the lease.
c. Type pump to renew the lease.
Note
If you change the LAN IP address of the device while connected
through your Web browser, you will be disconnected. You must
open a new connection by entering your new LAN IP address as
the URL.
58
11n AP Router User’s Manual
DHCP Static IP Configuration
If you need to assign static ip for your computer or device on the
local area network, configure static ip with the mac address.:
1. From the Setup menu, click on Local Network. The
following page is displayed:
59
11n AP Router User’s Manual
2. Enter the IP Address.
3. Enter the Mac Address.
4. Click Add.
5. The DHCP Static IP Configuration that you created has
been added in the DHCP Static IP Table.
60
11n AP Router User’s Manual
10
Internet Setup
This chapter describes how to configure the way that your
device connects to the Internet. Your ISP determines what type
of Internet access you should use and provides you with any
information that you need in order to configure the Internet
access to your device.
Wireless Gateway supports 3 methods of obtaining the WAN IP
address:
Option
Description
Static IP
Choose this option if you are a leased line user with a fixed IP address.
DHCP Client
Choose this option if you are connected to the Internet through a Cable
modem line.
PPPoE
Choose this option if you are connected to the Internet through a DSL line
61
11n AP Router User’s Manual
1. From the Setup menu, click on Internet Setup. The
following page is displayed:
62
11n AP Router User’s Manual
Option
WAN
Access
Type
Description
Static IP
Choose this option if you are a leased line user with a
fixed IP address.
DHCP Client
Choose this option if you are connected to the Internet
through a Cable modem line.
PPPoE
Choose this option if you are connected to the Internet
through a DSL line
Host Name
The name of the DHCP host
IP Address
Check with your ISP provider
Subnet Mask
Check with your ISP provider
Default Gateway
Check with your ISP provider
User Name
User name for PPPoE registration recognized by the
Internet service provider
Password
Password for PPPoE registration recognized by the
Internet service provider
Service Name
Service Name for PPPoE registration recognized by the
Internet service provider
Connection
Type
Continuous
The connection is always on
Connect on
Demand
Enter the minutes after which the session must be
disconnected, if no activity takes place
Manual
Manually connect
Idle Time
Enter the minutes after which the session must be
disconnected
MTU Size
Specify the network MTU rate
Attain DNS Automatically
Obtain DNS server address automatically
DNS 1 (Primary DNS Server)
Check with your ISP provider
DNS 2 (Secondary DNS Server)
Check with your ISP provider
DNS 3 (Third DNS Server)
Check with your ISP provider
MAC Clone
Clone MAC lets the device identify itself as another
computer or device
63
11n AP Router User’s Manual
Configuring Static IP connection
If you are a leased line user with a fixed IP address, enter in the
IP address, subnet mask, gateway address, and DNS (domain
name server) address(es) provided to you by your ISP.
If your ISP wants you to connect to the Internet using Static IP,
follow the instructions below.
1. From the Setup menu, click on Internet Setup. The
following page is displayed:
2. From the WAN Access Type drop-down list, select Static IP
setting.
3. Enter WAN IP Address, WAN Subnet Mask, Default
Gateway and DNS which was given by Telecom or by your
Internet Service Provider (ISP).
4. Click Apply Changes.
64
11n AP Router User’s Manual
Configuring DHCP Client connection
Dynamic Host Configuration Protocol (DHCP), Dynamic IP (Get
WAN IP Address automatically). If you are connected to the
Internet through a Cable modem line, then a dynamic IP will be
assigned.
If your ISP wants you to connect to the Internet using DHCP
Client, follow the instructions below.
1. From the Setup menu, click on Internet Setup. The
following page is displayed:
2. From the WAN Access Type drop-down list, select DHCP
Client setting.
3. Click Apply Changes.
65
11n AP Router User’s Manual
Configuring PPPoE connection
If your ISP’s Internet service uses PPPoE you need to set up a
PPP login account. The first time that you login to the Internet,
your ISP will ask you to enter a username and password so
they can check that you are a legitimate, registered Internet
service user. Your device stores these authentication details, so
you will not have to enter this username and password every
time you login.
If your ISP wants you to connect to the Internet using PPP,
follow the instructions below.
1. From the Setup menu, click on Internet Setup. The
following page is displayed:
2. From the WAN Access Type drop-down list, select PPPoE
setting.
3. Enter User Name/Password provided by your ISP. Type
them in the relevant boxes.
4. Click Apply Changes.
66
11n AP Router User’s Manual
Clone MAC Address
Some particularly ISPs do not want you to have a home
network and have a DSL/Cable modem that allows only 1 MAC
to talk on the internet. If you change network cards, you have to
call them up to change the MAC. The Wireless Gateway can it’s
MAC to computer's one that was originally set up for such an
ISP.
This page allows you to enable or disable Clone MAC Address
option.
1. From the Setup menu, click on Internet Setup. The
following page is displayed:
2. Click MAC manual ratio.
3. Enter the MAC for example 88:69:52:72:64:09 that you
want to be instead of in the Clone MAC Address field.
4. Click Apply Changes.
67
11n AP Router User’s Manual
11
IPv6
Use this section to configure your IPv6 Connection type. If you
are unsure of your connection method, please contact your
Internet Service Provider.
Wireless Basics
The Wireless Network page allows you to configure the
Wireless features of your device. To access the Wireless Basics
page:
From the Setup menu, click on IPv6. The following page is
displayed:
68
11n AP Router User’s Manual
12
Wireless Network
This chapter assumes that you have already set up your
Wireless PCs and installed a compatible Wireless card on your
device. See Configuring Wireless PCs.
Wireless Basics
The Wireless Network page allows you to configure the
Wireless features of your device. To access the Wireless Basics
page:
From the Wireless menu, click on Wireless Basics. The
following page is displayed:
Figure 5:
Wireless Network page
69
11n AP Router User’s Manual
Field
Description
Enable SSID
Broadcast
Broadcast or Hide SSID to your Network.
Enable Wireless
Isolation
Isolate your Network.
SSID
Specify the network name.
Default: Enabled
Default: Disabled
Each Wireless LAN network uses a unique Network Name to identify
the network. This name is called the Service Set Identifier (SSID). When
you set up your wireless adapter, you specify the SSID. If you want to
connect to an existing network, you must use the name for that
network. If you are setting up your own network you can make up your
own name and use it on each computer. The name can be up to 20
characters long and contain letters and numbers.
Mode
Specify the WLAN Mode to 802.11b mode, 802.11g mode, 802.11b/g
mode, 802.11n mode, 802.11n/g mode or 802.11b/g/n mode
Channel
Choose a Channel from the pull-down menu.
Band Width
Choose a Band Width from the pull-down menu.
Max
Transmission
Rate
Select the Max Transmission Rate from the drop-down list
Security Options
Configure the Encryption to None, WEP, WPA-PSK[TKIP] , WPA2PSK[AES] or WPA-PSK/WPA2-PSK AES
Security
Encryption(WEP)
Authentication Type: Automatic or Shared Keys
Security
Encryption(WEP)
Key
Select and configure Key 1, Key 2, Key 3 or Key 4
Security
Options(WPAPSK)
Enter the Pre-Shared Key
Security
Options(WPA2PSK)
Enter the Pre-Shared Key
Security
Options(WPAPSK+WPA2PSK)
Enter the Pre-Shared Key
Encryption Strength: 64 bits or 128 bits
70
11n AP Router User’s Manual
Wireless Multiple BSSID Settings
Here we provide several guest networks for your guests to use
your router to surf the Internet temporary. You can configure
your SSID, security options and so on. Guests can only access
to your router if you enable your guest network.
To access the MBSSID Settings page:
From the WLAN menu, click on MBSSID. The following page is
displayed:
Field
Description
Network
Profiles
You can click radio button of each profile to check detail info or change
settings of each profile. The table is a brief summary of how many
profiles you can create, it provides profile number, SSID of this profile,
Security type of this profile, this guest wireless network is Enabled or
Not, and the SSID will be displayed or not.
Enable Guest
Network
If this check box is checked, then this guest network is enabled. You
and your visitors can connect to your network via the SSID of this
profile.
Enable SSID
Broadcast
If Enabled, the Wireless Access Point will broadcast its name (SSID)
to all Wireless Stations. Stations which have no SSID (or a null value)
can then adopt the correct SSID for connections to this Access Point.
Allow Guest to
access My
Local Network
If Unchecked, any user connects to this SSID can only access internet,
but can not access gateway's management UI, such as Web Server,
Telnet, etc. . All clients in this SSID are not allowed to access clients of
other SSIDs and Ethernet network.
71
11n AP Router User’s Manual
If Checked, any user who connects to this SSID can access not only
internet but also local networks of this wireless router like users in
primary SSID.
Enable Wireless
Isolation
If checked, the wireless client under this SSID can`t access other
wireless clients under the same SSID.
If unchecked, the wireless client under this SSID can access other
wireless clients under the same SSID.
Guest Wireless
Network
Name(SSID)
Enter a value of up to 32 alphanumeric characters. The same Name
(SSID) must be assigned to all wireless devices in your network. The
default SSID is SSID_N, N is profile number, but we strongly
recommend that you change your network`s Name (SSID) to a different
value. This value is also case-sensitive. For example, SSID is not the
same as SSId.
Security
Options
None - no data encryption
WEP - Wired Equivalent Privacy, use WEP 64- or 128-bit data encryption
Note: Wi-Fi Protected Setup function is disabled when the security
setting is WEP with Shared-Key authentication
WPA-PSK [TKIP] - Wi-Fi Protected Access with Pre-Shared Key, use
WPA-PSK standard encryption with TKIP encryption type
WPA2-PSK [AES] - Wi-Fi Protected Access version 2 with Pre-Shared
Key, use WPA2-PSK standard encryption with the AES encryption type
WPA-PSK [AES] + WPA2-PSK [AES] - Allow clients using either WPAPSK [AES] or WPA2-PSK [AES]
To achieve the best performance with 11N wireless adapters under
robust security network, we recommends that you change your
network`s security option to WPA2-PSK.
72
11n AP Router User’s Manual
WPS Setup
Through this process, You can easily add wireless clients to the
network without the need for any specific configuration, such as
SSID, security mode or password.
From the Wireless menu, click on WPS. The following page is
displayed:
You can add wireless client by PIN mode. If you use PIN mode,
you should input client PIN code. Meanwhile you should start
client WPS process. You can find client PIN code on client
manager.
73
11n AP Router User’s Manual
Wireless Advanced Settings
This page helps you to setup advanced wireless features,
include Fragment Threshold etc.
From the Wireless menu, click on Wireless Advanced. The
following page is displayed:
Field
Fragment
Threshold
Description
When transmitting a packet over a network medium, sometimes the
packet is broken into several segments, if the size of packet exceeds
that allowed by the network medium.
The Fragmentation Threshold defines the number of bytes used for the
fragmentation boundary for directed messages.
RTS Threshold
RTS stands for “Request to Send”. This parameter controls what size
data packet the low level RF protocol issues to an RTS packet. The
default is 2347.
Preamble Type
This is the length of the CRC (Cyclic Redundancy Check) block for
communication between the router and wireless clients. High network
traffic areas should select Short preamble type.
Radio Power
(Percent)
TX Power measurement.
HT20/40
Disable or Enable 20/40MHz Coexist
74
11n AP Router User’s Manual
Coexistence
Enable WPS
Disable or Enable WPS
Disable PIN
Disable or Enable PIN
Keep current
configuration
Disable or Enable current configuration
Wireless Access Control Mode
For security reason, using MAC ACL's (MAC Address Access
List) creates another level of difficulty to hacking a network. A
MAC ACL is created and distributed to AP so that only
authorized NIC's can connect to the network. While MAC
address spoofing is a proven means to hacking a network this
can be used in conjunction with additional security measures to
increase the level of complexity of the network security
decreasing the chance of a breach.
MAC addresses can be add/delete/edit from the ACL list
depending on the MAC Access Policy.
If you choose 'Allowed Listed', only those clients whose wireless
MAC addresses are in the access control list will be able to
connect to your Access Point. When 'Deny Listed' is selected,
these wireless clients on the list will not be able to connect the
Access Point. To access the Wireless Network Access Control
page:
From the Wireless menu, click on Access Control and then click
on ACL Setup button. The following page is displayed:
75
11n AP Router User’s Manual
Allow Listed
If you Enable Wireless Access Control Mode, only those clients
whose wireless MAC addresses are in the access control list
will be able to connect to your Access Point.
1. Enable Wireless Access Control Mode.
2. Click Apply button.
3. Click OK button.
4. Enter the MAC Address.
5. Click Add button.
76
11n AP Router User’s Manual
6. The MAC Address that you created has been added in the
Access Control List.
77
11n AP Router User’s Manual
Wireless Repeater
This page provides tool to scan the wireless network. If any
Access Point or IBSS is found, you could choose to connect it
manually. To access the Wireless Repeater settings page:
From the Wireless menu, click on Wireless Repeater. The
following page is displayed:
1. Enable Repeater Enabled.
2. Click Site Survey button.
3. Click OK button.
78
11n AP Router User’s Manual
4. Surveying, do not interrupt, 30s left.
5. Now you could see the APs that scanned by the Wireless
Gateway were listed below.
6. Click on the ratio of AP’s SSID under the item Select that
you want the Wireless Gateway to connect to.
7. Click Next button.
79
11n AP Router User’s Manual
8. Setup Wireless Security Settings.
9. Click Apply button.
10. We strongly recommend that you modify IP address of the
local gateway to avoid IP address conflicts with the center
of the AP. (ex. if IP address of AP is 192.168.1.1, you can
modify IP address of the local gateway to 192.168.1.2).
11. Click Finish button.
12. Click Apply button.
80
11n AP Router User’s Manual
13
Access Control List Configuration
You can specify which services are accessable form WAN side.
Entries in this ACL table are used to permit certain types of data
packets from your local network or Internet network to the
Gateway.
Using of such access control can be helpful in securing or
restricting the Gateway management.
Access Control List Config
1. From the Advanced menu, click on Access Control List.
The following page is displayed:
Figure 6:
ACL Configuration page
81
11n AP Router User’s Manual
14
Port Triggering
Port Triggering is a special form of Port Forwarding in which it
requires an outgoing connection before allowing incoming
connections on a single or multiple port. Port Triggering is
mostly used when your computer is behind a NAT router.
For example, if a gaming application sends outgoing data on
ports 5000-6000 but receives the incoming data on port 111,
typically behind a NAT router the router simply drops the data
because it does not know which computer it should send
requests to. But with port triggering you can tell the router to
allow incoming data on port 111 when an outgoing data sends it
through ports 5000-6000. It gives more flexibility than static port
forwarding because you don't need to set it up for a specific
computer.
Port Triggering Config
2. From the Advanced menu, click on Port Triggering. The
following page is displayed:
82
11n AP Router User’s Manual
15
URL Blocking
URL Blocking is used to deny LAN users from accessing the
internet. Block those URLs which contain keywords listed below.
1. From the Advanced -> URL Blocking menu. The following
page is displayed:
83
11n AP Router User’s Manual
URL Blocking for specified URL Address
Please follow example below to deny LAN users from accessing
the Internet.
2. From the Advanced -> URL Blocking menu. The following
page is displayed:
3. Enable URL Blocking Capability.
4. Click Apply Changes.
5. Enter the URL Address that you want to be denied for LAN
user.
6. Click AddKeyword.
84
11n AP Router User’s Manual
7. Now the URL Filter that you created has been added and
listed in the Current Filter Table.
8. Now the URL Address in the Current Filter Table cannot be
visited.
85
11n AP Router User’s Manual
16
Dynamic DNS
When you want your internal server to be accessed by using
DNS name rather than using the dynamic IP address, you can
use the DDNS service. The DDNS server allows to alias a
dynamic IP address to a static hostname.
This chapter provides you an overview of the Dynamic DNS
feature of the modem and configuration details related to it.
Overview
If some host has a dynamic IP address that keeps changing
frequently, it is difficult to keep updating the IP record that is
associated with the domain name of this host in the zone files.
This will result in non-accessibility of this host on the Internet.
Dynamic DNS service allows to keep mapping of a dynamic IP
address of such host to a static hostname. Dynamic DNS
services are provided by many websites. The host needs to
register with some website and get a domain name. When the
IP address of the host changes, it just needs to send a message
to the website that's providing dynamic DNS service to this host.
For this to work, an automated update client needs to be
implemented. These update clients send update messages to
the servers whenever there is some change in the IP address of
that host. Then, the server updates the entries for that host and
replies back with some return code.
Above Figure explains one such scenario in which a host gets a
dynamic IP address for itself from a DHCP server. As the host
has registered with one of the dynamic DNS service providers
on the Internet, it sends an update message to the service
provider with host name and changed IP address. The service
provider updates the new IP address of the host in the zone
files that have entry for that host name and replies back with
some return code. The return code communicates the success
or failure of the update message. This process is repeated
every time the host's IP address changes.
86
11n AP Router User’s Manual
If the dynamic DNS service provider is notified of the same IP
address again and again, then it considers it an abuse and
might block the host name. To avoid this scenario, the IP
address that was successfully updated to the ISP is stored on
the unit. Whenever we receive an IP address change
notification, the new IP address is compared with the IP address
that was stored on the last update. If they differ, then only an
update request is sent. However, when the system comes up
there is no way of knowing what was the IP address on last
successful update before the system went down. You need to
give the command “system config save“ periodically to save this
IP address on Flash.
Registering With Dynamic DNS Service Provider
Currently, Wireless Gateway supports two Dynamic DNS
service providers, www.tzo.com and www.dyndns.com. To use
their Dynamic DNS service, you first need to visit the Web site
of a service provider and register. While registering, you need to
provide your username, password, and hostname as mandatory
parameters. A service provider may also prompt you to fill some
optional parameters.
Configuring IP Interfaces
You need to create a Dynamic DNS interface per IP interface
and can only create one Dynamic DNS interface service on one
IP interface. For more information on creating IP interfaces,
refer to section Creating IP interfaces.
Note
www.dyndns.org provides three kinds of services - Dynamic DNS,
Custom DNS and Static DNS. You can create different domains in
these systems. Custom DNS service is a full DNS solution for
newly purchased domains or domains you already own. A webbased interface provides complete control over resource records
and your entire domain, including support for dynamic IPs and
automated updates. Static DNS service points a DNS hostname
in some domain owned by dyndns.org to the user's ISP-assigned
static or pseudo-static IP address.
DynDNS service points a fixed hostname in some domain owned
by dyndns.org to the user's ISP-assigned dynamic IP address.
This allows more frequent update of IP addresses, than allowed
by Static DNS.
87
11n AP Router User’s Manual
1. From the Advanced -> Dynamic DNS menu. The following
page is displayed:
88
11n AP Router User’s Manual
Configure DynDNS
2. From the Advanced -> Dynamic DNS menu. The following
page is displayed:
89
11n AP Router User’s Manual
3. Enable DDNS
4. Select the DynDNS.org from the Service Provider dropdown list.
5. Type your own unique User Name, Password and Domain
Name which you applied from www.dyndns.com in the
relevant boxes. They can be any combination of letters or
numbers with a maximum of 20 characters.
6. Click Add.
7. Now the Dynamic DNS that you created has been added
and listed in the Dynamic DDNS Table.
90
11n AP Router User’s Manual
Configure TZO
1. From the Advanced -> Dynamic DNS menu. The following
page is displayed:
91
11n AP Router User’s Manual
2. Enable DDNS
3. Select the TZO from the Service Provider drop-down list.
4. Type your own unique Email, Key and Domain Name which
you applied from
http://www.tzo.com/MainPageWebClient/clientsignup.html
in the relevant boxes. They can be any combination of
letters or numbers with a maximum of 20 characters.
5. Click Add.
6. Now the Dynamic DNS that you created has been added
and listed in the Dynamic DDNS Table.
92
11n AP Router User’s Manual
17
QoS
QoS is a pro-active measures to adjust the output rate of flow.
The role is to limit the outflow of a network traffic of a connection
with sudden, so that such packets to send out a uniform rate.
You can add traffic shaping rules.
1. From the Advanced -> QoS Setup menu. The following
page is displayed:
93
11n AP Router User’s Manual
18
UPnP
UPnP is short for Universal Plug and Play, which is a
networking architecture that provides compatibility among
networking equipment, software, and peripherals. This router
has optional UPnP capability, and can work with other UPnP
devices and software.
1. From the Advanced -> UPnP menu. The following page is
displayed:
94
11n AP Router User’s Manual
19
Virtual Server
Your device has built in advanced Security features that protect
your network by blocking unwanted traffic from the Internet.
If you simply want to connect from your local network to the
Internet, you do not need to make any changes to the default
Security configuration. You only need to edit the configuration if
you wish to do one or both of the following:
•
allow Internet users to browse the user pages on your local
network (for example, by providing an FTP or HTTP server)
•
play certain games which require accessibility from the
Internet
This chapter describes how to configure Security to suit the
needs of your network.
By default, the IP addresses of your LAN PCs are hidden from
the Internet. All data sent from your LAN PCs to a PC on the
Internet appears to come from the IP address of your device.
In this way, details about your LAN PCs remain private. This
security feature is called Port Forwarding.
Configuring Virtual Server
Certain network games, chat or file sharing software do not
work with your default Port Forwarding setting. Your device
knows the port, protocol and trigger information needed to allow
access to the common applications listed below, but by default,
access to them is disabled.
Application
TCP
port
number
UDP
port
number
Trigger
required?
E-mail
110, 25
N/A
false
News
119
N/A
false
MSN Messenger
1863
N/A
false
Yahoo! Instant Messenger
5050
5055
5100
N/A
false
AOL Instant Messenger
5190
N/A
false
Internet Relay Chat (IRC)
194
194
false
1720
N/A
true
N/A
1719
true
1731
522
N/A
false
544
7070
544
6770
false
Ping
N/A
(ICMP)
N/A
(ICMP)
false
Web connections (HTTP,
HTTPS)
80, 443
N/A
false
DialPad
51210
N/A
true
Netmeeting (h323)
Real Audio
95
11n AP Router User’s Manual
Application
TCP
port
number
UDP
port
number
Trigger
required?
N/A
51200
51201
true
FTP
21
N/A
false
Telnet
23
N/A
false
Secure shell (SSH)
22
N/A
false
Windows Media Services
1755
1755
false
Gnutella
6346
N/A
false
Kazaa
1214
N/A
false
Windows Terminal Server
3389
N/A
false
DNS
N/A
53
false
PPTP
1723
1723
false
Internet Key Exchange
N/A
500
false
LDAP
389
N/A
false
GRE
N/A
(GRE)
N/A
(GRE)
false
Databeam (T.120)
1503
N/A
false
You can enable access to a common application from a specific
PC on your network.
If you want to allow access to an application that is not included
on the above list of common applications, you can create and
enable a custom application.
Configuring custom applications
If you want to enable access to an application that does not
appear on your device’s default list of common applications you
can create a custom application.
In order to create a custom application, you must know:
1. the protocol used by the application (e.g., TCP, UDP and so
on)
2. the primary port or range of ports used by the application
3. whether the application requires a trigger, and if so, the
secondary port or range of ports used by the application
4. the address translation type used by the trigger
Your application provider or games manufacturer should
provide you with these details.
96
11n AP Router User’s Manual
Virtual Server for FTP
In this example configuration, a custom application called FTP
Server using TCP port 21 is created.
5. From the Advanced -> Virtual Server menu. The following
page is displayed:
97
11n AP Router User’s Manual
6.
7.
8.
9.
Select FTP from the Usual Service Name drop-down list.
Select TCP from the Protocol drop-down list.
Type the Local IP Address for your FTP Server.
Click Apply Changes
Fields on the
first setting
block
Description
Usual Service
Name
The usual Service is listed here.
User-defined
Service Name
To define the Service Name manually.
Protocol
There are 2 options available: TCP, UDP.
WAN Port
The destination port number that is made open for this
application on the WAN-side
LAN Open Port
The destination port number that is made open for this
application on the LAN-side.
LAN Ip Address
IP address of your local server that will be accessed by
Internet.
Function Button Description
Apply Changes
Click to change the setting of default actions to the
configuration.
Delete
Delete the selected port forwarding rules from the
forwarding table. You can click the checkbox at the
Select column to select the forwarding rule.
Disable
Disable forwarding rules from the forwarding table.
98
11n AP Router User’s Manual
10. Configure Virtual Server setting successfully!
Port Forwarding for HTTP
In this example configuration, a custom application called HTTP
Server using TCP port 80 is created.
1. From the Advanced -> Virtual Server menu. The following
page is displayed:
99
11n AP Router User’s Manual
2.
3.
4.
5.
Select WEB from the Usual Service Name drop-down list.
Select TCP from the Protocol drop-down list.
Type the Local IP Address for your HTTP Server.
Click Apply Changes
Fields on the
first setting
block
Description
Usual Service
Name
The usual Service is listed here.
User-defined
Service Name
To define the Service Name manually.
Protocol
There are 2 options available: TCP, UDP.
WAN Port
The destination port number that is made open for this
application on the WAN-side
LAN Open Port
The destination port number that is made open for this
application on the LAN-side.
LAN Ip Address
IP address of your local server that will be accessed by
Internet.
Function Button Description
Apply Changes
Click to change the setting of default actions to the
configuration.
Delete
Delete the selected port forwarding rules from the
forwarding table. You can click the checkbox at the
Select column to select the forwarding rule.
Disable
Disable forwarding rules from the forwarding table.
100
11n AP Router User’s Manual
6. Configure Virtual Server setting successfully!
Deleting custom applications
1. From the Advanced -> Virtual Server menu. The following
page is displayed:
2. Click Delete.
3. The Port Forwarding setting has been deleted completely.
101
11n AP Router User’s Manual
20
Reboot/Reset
Restarts the router with current setting or default setting.
Reboot/Reset
1. From the Maintenance -> Reboot menu. The following page
is displayed:
Fields on the
first setting
block
Description
Reboot
Restarts the router for the settings to take effect.
Reset
Restarts the router with factory default setting.
102
11n AP Router User’s Manual
21
Firmware Upgrade
About firmware versions
Firmware is a software program. It is stored as read-only
memory on your device.
Your device can check whether there are later firmware
versions available. If there is a later version, you can download
it via the Internet and install it on your device.
Note
If there is a firmware update available you are strongly advised to
install it on your device to ensure that you take full advantage of
any new feature developments.
Manually updating firmware
You can manually download the latest firmware version from
provider’s website to your PC’s file directory.
Once you have downloaded the latest firmware version to your
PC, you can manually select and install it as follows:
1. From the Maintenance -> Firmware Upgrade menu. The
following page is displayed:
2. Click on the Browse… button.
3. Once you have selected the file to be installed, click Open.
The file’s directory path is displayed in the New Firmware
Image: text box.
4. Click Automatically reset default after firmware upgraded.
5. Click Upload.
Figure 7:
Manual Update Installation section
(Note that if you are using certain browsers (such as Opera
7) the Browse button is labeled Choose.)
Use the Choose file box to navigate to the relevant directory
where the firmware version is saved.
103
11n AP Router User’s Manual
6. Click OK.
7. The device checks that the selected file contains an
updated version of firmware. A status screen pops up,
please wait for a while…….
8. The device checks that the selected file contains an
updated version of firmware. A status screen pops up,
please wait for a while…….
104
11n AP Router User’s Manual
22
Backup/Restore Settings
This page allows you save current settings to a file or reload the
settings from the file which was saved previously.
Besides, you could reset the current configuration to factory
default.
If you do make changes to the default configuration but then
wish to revert back to the original factory configuration, you can
do so by resetting the device to factory defaults.
Save Settings to File
It allows you save current settings to a file.
1. From the Maintenance -> Backup/Restore menu. The
following page is displayed:
Figure 8:
Option
Reset to Defaults page
Description
Save Settings
to File
Save the Settings to a File
Load Settings
from File
Load Settings from a File
2. Click on Save….
105
11n AP Router User’s Manual
3. If you are happy with this, click Save and then browse to
where the file to be saved. Or click Cancel to cancel it.
Load Settings from File
It allows you to reload the settings from the file which was saved
previously.
4. From the Maintenance -> Backup/Restore menu. The
following page is displayed:
5. Click on Browse….to browse to where the config.img is.
106
11n AP Router User’s Manual
6. If you are happy with this, click Upload to start to load
settings from file.
7. If you are happy with this, click Upload to start to load
settings from file.
8. please wait for a while…….
107
11n AP Router User’s Manual
23
Password
You can restrict access to your device’s web pages using
password protection. With password protection enabled, users
must enter a username and password before gaining access to
the web pages.
By default, password protection is enabled on your device, and
the username and password set are as follows:
Username: admin
Password: administrator
Setting your username and password
Note
Non-authorized users may try to access your system by guessing
your username and password. We recommend that you change
the default username and password to your own unique settings.
To change the default password:
1. From the Maintenance -> Password menu. The following
page is displayed:
108
11n AP Router User’s Manual
2. This page displays the current username and password
settings. Change your own unique password in the relevant
boxes. They can be any combination of letters or numbers
with a maximum of 30 characters. The default setting uses
admin for the username and administrator for password.
3. If you are happy with these settings, click Modify. You will
see following page that the new user has been displayed on
the Currently Defined Users. You need to login to the web
pages using your new username and new password.
4. Click on the ratio of admin from User Account Table.
5.
6.
7.
8.
Enter the Old Password.
Enter the New Password.
Enter the Confirm Password.
Click on Modify.
109
11n AP Router User’s Manual
24
Time and Date
Certain systems may not have a date or time mechanism or
may be using inaccurate time/day information. the Simple
Network Time Protocol feature provides a way to synchronize
the device’s own time of day setting with a remote time server
as described in RFC 2030 (SNTP) and RFC 1305 (NTP).
Time and Date Configuration settings
1. From the Maintenance -> Time and Date menu. The
following page is displayed:
110
11n AP Router User’s Manual
2. Check the option State.
3. Configure the Server.
4. From the Time Zone drop-down list, select Your Own Time
Zone.
5. Click Apply Changes.
111
11n AP Router User’s Manual
25
Status
This page displays the current information for the device. It will
display the LAN, WAN, and system firmware information. This
page will display different information, according to WAN setting
(Static IP, DHCP, or PPPoE).
1. From the Status -> Device Info menu. The following page is
displayed:
112
11n AP Router User’s Manual
26
Active Client Table
This page shows the computers, identified by the name and
MAC address that have acquired IP addresses by the DHCP
server with the time that the lease for the IP address is up
1. From the Status -> Active Client Table menu. The following
page is displayed:
113
11n AP Router User’s Manual
27
Statistics
This page shows the packet statistics for transmission and
reception regarding to network interface.
1. From the Status -> Statistics menu. The following page is
displayed:
114
11n AP Router User’s Manual
28
IPV6
All of your IPv6 Internet and network connection details are
displayed on this page.
2. From the Status -> IPv6 menu. The following page is
displayed:
115
11n AP Router User’s Manual
Configuring your Computers
This appendix provides instructions for configuring the Internet
settings on your computers to work with the Wireless Gateway.
Configuring Ethernet PCs
Before you begin
By default, the Wireless Gateway automatically assigns the
required Internet settings to your PCs. You need to configure
the PCs to accept this information when it is assigned.
Note
In some cases, you may want to assign Internet information
manually to some or all of your computers rather than allow the
Wireless Gateway to do so. See Assigning static Internet
information to your PCs for instructions.
•
If you have connected your LAN PCs via Ethernet to the
Wireless Gateway, follow the instructions that correspond to
the operating system installed on your PC:
•
Windows® XP PCs
•
Windows 2000 PCs
•
Windows Me PCs
•
Windows 95, 98 PCs
•
Windows NT 4.0 workstations
Windows® XP PCs
1. In the Windows task bar, click the Start button, and then
click Control Panel.
2. Double-click the Network Connections icon.
3. In the LAN or High-Speed Internet window, right-click on
the icon corresponding to your network interface card (NIC)
and select Properties. (Often, this icon is labeled Local Area
Connection).
The Local Area Connection dialog box is displayed with a
list of currently installed network items.
4. Ensure that the check box to the left of the item labeled
Internet Protocol TCP/IP is checked and click Properties.
5. In the Internet Protocol (TCP/IP) Properties dialog box, click
the radio button labeled Obtain an IP address automatically.
Also click the radio button labeled Obtain DNS server
address automatically.
6. Click OK twice to confirm your changes, and then close the
Control Panel.
Windows 2000 PCs
First, check for the IP protocol and, if necessary, install it:
1. In the Windows task bar, click the Start button, point to
Settings, and then click Control Panel.
2. Double-click the Network and Dial-up Connections icon.
116
11n AP Router User’s Manual
3. In the Network and Dial-up Connections window, right-click
the Local Area Connection icon, and then select Properties.
The Local Area Connection Properties dialog box is
displayed with a list of currently installed network
components. If the list includes Internet Protocol (TCP/IP),
then the protocol has already been enabled. Skip to step 10.
4. If Internet Protocol (TCP/IP) does not display as an installed
component, click Install…
5. In the Select Network Component Type dialog box, select
Protocol, and then click Add…
6. Select Internet Protocol (TCP/IP) in the Network Protocols
list, and then click OK.
You may be prompted to install files from your Windows
2000 installation CD or other media. Follow the instructions
to install the files.
7. If prompted, click OK to restart your computer with the new
settings.
Next, configure the PCs to accept IP information assigned by
the Wireless Gateway:
8. In the Control Panel, double-click the Network and Dial-up
Connections icon.
9. In the Network and Dial-up Connections window, right-click
the Local Area Connection icon, and then select Properties.
10. In the Local Area Connection Properties dialog box, select
Internet Protocol (TCP/IP), and then click Properties.
11. In the Internet Protocol (TCP/IP) Properties dialog box, click
the radio button labeled Obtain an IP address automatically.
Also click the radio button labeled Obtain DNS server
address automatically.
12. Click OK twice to confirm and save your changes, and then
close the Control Panel.
117
11n AP Router User’s Manual
Windows Me PCs
1. In the Windows task bar, click the Start button, point to
Settings, and then click Control Panel.
2. Double-click the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click
the Network icon, and then select Properties.
The Network Properties dialog box displays with a list of
currently installed network components. If the list includes
Internet Protocol (TCP/IP), then the protocol has already
been enabled. Skip to step 11.
4. If Internet Protocol (TCP/IP) does not display as an installed
component, click Add…
5. In the Select Network Component Type dialog box, select
Protocol, and then click Add…
6. Select Microsoft in the Manufacturers box.
7. Select Internet Protocol (TCP/IP) in the Network Protocols
list, and then click OK.
You may be prompted to install files from your Windows Me
installation CD or other media. Follow the instructions to
install the files.
8. If prompted, click OK to restart your computer with the new
settings.
Next, configure the PCs to accept IP information assigned by
the Wireless Gateway:
9. In the Control Panel, double-click the Network and Dial-up
Connections icon.
10. In Network and Dial-up Connections window, right-click the
Network icon, and then select Properties.
11. In the Network Properties dialog box, select TCP/IP, and
then click Properties.
12. In the TCP/IP Settings dialog box, click the radio button
labeled Server assigned IP address. Also click the radio
button labeled Server assigned name server address.
13. Click OK twice to confirm and save your changes, and then
close the Control Panel.
Windows 95, 98 PCs
First, check for the IP protocol and, if necessary, install it:
1. In the Windows task bar, click the Start button, point to
Settings, and then click Control Panel.
2. Double-click the Network icon.
The Network dialog box displays with a list of currently
installed network components. If the list includes TCP/IP,
and then the protocol has already been enabled. Skip to
step 9.
3. If TCP/IP does not display as an installed component, click
Add…
The Select Network Component Type dialog box displays.
4. Select Protocol, and then click Add…
The Select Network Protocol dialog box displays.
118
11n AP Router User’s Manual
5. Click on Microsoft in the Manufacturers list box, and then
click TCP/IP in the Network Protocols list box.
6. Click OK to return to the Network dialog box, and then click
OK again.
You may be prompted to install files from your Windows
95/98 installation CD. Follow the instructions to install the
files.
7. Click OK to restart the PC and complete the TCP/IP
installation.
Next, configure the PCs to accept IP information assigned by
the Wireless Gateway:
8. Open the Control Panel window, and then click the Network
icon.
9. Select the network component labeled TCP/IP, and then
click Properties.
If you have multiple TCP/IP listings, select the listing
associated with your network card or adapter.
10. In the TCP/IP Properties dialog box, click the IP Address
tab.
11. Click the radio button labeled Obtain an IP address
automatically.
12. Click the DNS Configuration tab, and then click the radio
button labeled Obtain an IP address automatically.
13. Click OK twice to confirm and save your changes.
You will be prompted to restart Windows.
14. Click Yes.
Windows NT 4.0 workstations
First, check for the IP protocol and, if necessary, install it:
1. In the Windows NT task bar, click the Start button, point to
Settings, and then click Control Panel.
2. In the Control Panel window, double click the Network icon.
3. In the Network dialog box, click the Protocols tab.
The Protocols tab displays a list of currently installed
network protocols. If the list includes TCP/IP, then the
protocol has already been enabled. Skip to step 9.
4. If TCP/IP does not display as an installed component, click
Add…
5. In the Select Network Protocol dialog box, select TCP/IP,
and then click OK.
You may be prompted to install files from your Windows NT
installation CD or other media. Follow the instructions to
install the files.
After all files are installed, a window displays to inform you
that a TCP/IP service called DHCP can be set up to
dynamically assign IP information.
6. Click Yes to continue, and then click OK if prompted to
restart your computer.
Next, configure the PCs to accept IP information assigned by
the Wireless Gateway:
119
11n AP Router User’s Manual
7. Open the Control Panel window, and then double-click the
Network icon.
8. In the Network dialog box, click the Protocols tab.
9. In the Protocols tab, select TCP/IP, and then click
Properties.
10. In the Microsoft TCP/IP Properties dialog box, click the
radio button labeled Obtain an IP address from a DHCP
server.
11. Click OK twice to confirm and save your changes, and then
close the Control Panel.
Assigning static Internet information to your PCs
If you are a typical user, you will not need to assign static
Internet information to your LAN PCs because your ISP
automatically assigns this information for you.
In some cases however, you may want to assign Internet
information to some or all of your PCs directly (often called
“statically”), rather than allowing the Wireless Gateway to assign
it. This option may be desirable (but not required) if:
•
You have obtained one or more public IP addresses that
you want to always associate with specific computers (for
example, if you are using a computer as a public web
server).
•
You maintain different subnets on your LAN (subnets are
described in Appendix B).
Before you begin, you must have the following information
available:
•
The IP address and subnet mask of each PC
•
The IP address of the default gateway for your LAN. In
most cases, this is the address assigned to the LAN port on
the Wireless Gateway. By default, the LAN port is assigned
the IP address 10.0.0.2. (You can change this number or
another number can be assigned by your ISP. See
Addressing for more information.)
•
The IP address of your ISP’s Domain Name System (DNS)
server.
On each PC to which you want to assign static information,
follow the instructions relating only to checking for and/or
installing the IP protocol. Once it is installed, continue to follow
the instructions for displaying each of the Internet Protocol
(TCP/IP) properties. Instead of enabling dynamic assignment of
the IP addresses for the computer, DNS server and default
gateway, click the radio buttons that enable you to enter the
information manually.
Note
Your PCs must have IP addresses that place them in the same
subnet as the Wireless Gateway’s LAN port. If you manually assign
IP information to all your LAN PCs, you can follow the instructions in
Addressing to change the LAN port IP address accordingly.
120
11n AP Router User’s Manual
IP Addresses, Network Masks, and
Subnets
IP Addresses
This section refers only to IP addresses for IPv4 (version 4 of the
Internet Protocol). IPv6 addresses are not covered.
Note
This section assumes basic knowledge of binary numbers, bits,
and bytes.
IP addresses, the Internet's version of telephone numbers, are
used to identify individual nodes (computers or devices) on the
Internet. Every IP address contains four numbers, each from 0
to 255 and separated by dots (periods), e.g. 20.56.0.211. These
numbers are called, from left to right, field1, field2, field3, and
field4.
This style of writing IP addresses as decimal numbers
separated by dots is called dotted decimal notation. The IP
address 20.56.0.211 is read "twenty dot fifty-six dot zero dot
two-eleven."
Structure of an IP address
IP addresses have a hierarchical design similar to that of
telephone numbers. For example, a 7-digit telephone number
starts with a 3-digit prefix that identifies a group of thousands of
telephone lines, and ends with four digits that identify one
specific line in that group.
Similarly, IP addresses contain two kinds of information:
•
Network ID
Identifies a particular network within the Internet or intranet
•
Host ID
Identifies a particular computer or device on the network
The first part of every IP address contains the network ID, and
the rest of the address contains the host ID. The length of the
network ID depends on the network's class (see following
section). The table below shows the structure of an IP address.
Field1
Class A
Class B
Field2
Network ID
Field4
Host ID
Network ID
Class C
Field3
Host ID
Network ID
Host ID
Here are some examples of valid IP addresses:
Class A: 10.30.6.125 (network = 10, host = 30.6.125)
Class B: 129.88.16.49 (network = 129.88, host = 16.49)
Class C: 192.60.201.11 (network = 192.60.201, host = 11)
Network classes
The three commonly used network classes are A, B, and C.
(There is also a class D but it has a special use beyond the
121
11n AP Router User’s Manual
scope of this discussion.) These classes have different uses
and characteristics.
Class A networks are the Internet's largest networks, each with
room for over 16 million hosts. Up to 126 of these huge
networks can exist, for a total of over 2 billion hosts. Because of
their huge size, these networks are used for WANs and by
organizations at the infrastructure level of the Internet, such as
your ISP.
Class B networks are smaller but still quite large, each able to
hold over 65,000 hosts. There can be up to 16,384 class B
networks in existence. A class B network might be appropriate
for a large organization such as a business or government
agency.
Class C networks are the smallest, only able to hold 254 hosts
at most, but the total possible number of class C networks
exceeds 2 million (2,097,152 to be exact). LANs connected to
the Internet are usually class C networks.
Some important notes regarding IP addresses:
•
The class can be determined easily from field1:
field1 = 1-126:
Class A
field1 = 128-191:
Class B
field1 = 192-223:
Class C
(field1 values not shown are reserved for special uses)
•
A host ID can have any value except all fields set to 0 or all
fields set to 255, as those values are reserved for special
uses.
Subnet masks
Definition
mask
A mask looks like a regular IP address, but contains a pattern of
bits that tells what parts of an IP address are the network ID and
what parts are the host ID: bits set to 1 mean "this bit is part of the
network ID" and bits set to 0 mean "this bit is part of the host ID."
Subnet masks are used to define subnets (what you get after
dividing a network into smaller pieces). A subnet's network ID is
created by "borrowing" one or more bits from the host ID portion
of the address. The subnet mask identifies these host ID bits.
For example, consider a class C network 192.168.1. To split this
into two subnets, you would use the subnet mask:
255.255.255.128
It's easier to see what's happening if we write this in binary:
11111111. 11111111. 11111111.10000000
As with any class C address, all of the bits in field1 through
field3 are part of the network ID, but note how the mask
specifies that the first bit in field4 is also included. Since this
extra bit has only two values (0 and 1), this means there are two
subnets. Each subnet uses the remaining 7 bits in field4 for its
host IDs, which range from 1 to 126 hosts (instead of the usual
0 to 255 for a class C address).
Similarly, to split a class C network into four subnets, the mask
is:
122
11n AP Router User’s Manual
255.255.255.192 or
11111111.11000000
11111111. 11111111.
The two extra bits in field4 can have four values (00, 01, 10, 11),
so there are four subnets. Each subnet uses the remaining six
bits in field4 for its host IDs, ranging from 1 to 62.
Sometimes a subnet mask does not specify any additional
network ID bits, and thus no subnets. Such a mask is called a
default subnet mask. These masks are:
Note
Class A:
Class B:
Class C:
255.0.0.0
255.255.0.0
255.255.255.0
These are called default because they are used when a network is
initially configured, at which time it has no subnets.
123
11n AP Router User’s Manual
UPnP Control Point Software on
Windows ME/XP
This appendix provides instructions for configuring the UPnP on
your computers to work with the Wireless Gateway.
UPnP is an architecture for pervasive peer-to-peer network
connectivity of intelligent appliances, Wireless devices, and PCs
of all form factors. It is designed to bring easy-to-use, flexible,
standards-based connectivity to ad-hoc or unmanaged
networks whether in the home, in a small business, public
spaces, or attached to the Internet. UPnP is a distributed, open
networking architecture that leverages TCP/IP and the Web
technologies to enable seamless proximity networking in
addition to control and data transfer among networked devices
in the home, office, and public spaces.
UPnP is more than just a simple extension of the plug and play
peripheral model. It is designed to support zero-configuration,
"invisible" networking, and automatic discovery for a breadth of
device categories from a wide range of vendors. This means a
device can dynamically join a network, obtain an IP address,
convey its capabilities, and learn about the presence and
capabilities of other devices. DHCP and DNS servers are
optional and are used only if available on the network. Finally, a
device can leave a network smoothly and automatically without
leaving any unwanted state behind.
UPnP Control Point Software on Windows ME
To install the control point software on Windows ME:
1. In the Control Panel, select "Add/Remove Programs".
2. In the "Add/Remove Programs Properties" dialog box, select
the "Windows Setup" tab. In the "Components" list, double click
on the "Communications" entry.
3. In the "Communications" dialog box, scroll down the
"Components" list to display the UPnP entry. Select the entry,
click "OK".
4. Click "OK" to finish the "Add/Remove Programs" dialog.
5. Reboot your system.
Once you have installed the UPnP software and you have
rebooted (and your network includes the IGD system), you
should be able to see the IGD controlled device on your network.
124
11n AP Router User’s Manual
UPnP Control Point Software on Windows XP with
Firewall
On Windows XP versions earlier than SP2, Firewall support is
provided by the Windows XP Internet Connection Firewall. You
cannot use the Windows XP Internet Connection Firewall
support on a system that you intend to use as a UPnP control
point. If this feature is enabled, although the control point
system may display controlled devices in the list of network
devices, the control point system cannot participate in UPnP
communication. (This restriction also applies to controlled
devices running on Windows XP systems earlier than SP2.)
On Windows XP SP2 and later, Firewall support is provided by
Windows Firewall. Unlike earlier versions, Windows XP SP2
can be used on a system that you intend to use as a UPnP
control point.
To turn off the Firewall capability on any version of Windows XP,
follow the steps below:
1. In the Control Panel, select "Network and Internet
Connections".
2. In the "Network and Internet Connections" dialog box, select
"Network Connections".
3. In the "Network Connections" dialog box, right-click on the
local area connection entry for your network; this will display a
menu. Select the "Properties" menu entry.
4. In the "Local Area Connection Properties" dialog box, select
the "Advanced" tab. Disable the Internet Connection Firewall by
de-selecting the entry with the following label:
"Protect my computer and network by limiting or preventing
access to the computer from the Internet".
5. Click "OK".
SSDP requirements
You must have SSDP Discovery Service enabled on your
Windows XP system to use the UPnP Control point software.
SSDP Discovery Service is enabled on a default installation of
Windows XP. To check if it is enabled on your system, look in
Control Panel > Administrative Tools > Services).
Installation procedure
To install the Control point software on Windows XP, follow the
steps below:
1. In the Control Panel, select "Add/Remove Programs".
2. In the "Add or Remove Programs" dialog box, click the "Add /
Remove Windows Components" button.
3. In the "Windows Component Wizard" dialog box, scroll down
the list to display the "Networking Services" entry. Highlight
(select) the entry, and click on the "Details" button.
125
11n AP Router User’s Manual
4. The “Networking Services” window is displayed.
The subcomponents shown in the Networking Services window
will be different depending on if you are using Windows XP,
Windows XP (SP1), or Windows XP (SP2).
If you are using Windows XP SP2, the Networking Services
window will display the following list of sub-components:
5. Select the following entries from the “Networking Services”
window and then click "OK":
If you are using Windows XP, select:
• "Universal Plug and Play".
If you are using Windows XP SP1, select:
• "Internet Gateway Device discovery and Control Client".
• "Universal Plug and Play".
If you are using Windows XP SP2, select:
• "Internet Gateway Device discovery and Control Client".
• "UPnP User Interface".
6. Reboot your system.
Once you have installed the UPnP software and you have
rebooted (and your network includes the IGD system), you
should be able to see the IGD controlled device on your network.
126
11n AP Router User’s Manual
For example, from the Network Connections window you should
see the Internet Gateway Device:
127
錯誤! 使用 [常用] 索引標籤將 Title 套用到您想要在此處顯示的文字。 User’s Guide
Troubleshooting
Troubleshooting
This appendix suggests solutions for problems you may
encounter in installing or using the Wireless Gateway, and
provides instructions for using several IP utilities to diagnose
problems.
Contact Customer Support if these suggestions do not resolve
the problem.
Troubleshooting Suggestions
Problem
Troubleshooting Suggestion
LEDs
Power LED does not
illuminate after
product is turned on.
LINK LAN LED does
not illuminate after
Ethernet cable is
attached.
Verify that you are using the power cable
provided with the device and that it is
securely connected to the Wireless
Gateway and a wall socket/power strip.
Verify that the Ethernet cable is securely
connected to your LAN hub or PC and to
the Wireless Gateway. Make sure the PC
and/or hub is turned on.
Verify that your cable is sufficient for your
network requirements. A 100 Mbit/sec
network (10BaseTx) should use cables
labeled CAT 5. A 10Mbit/sec network may
tolerate lower quality cables.
Internet Access
My PC cannot access
the Internet
My LAN PCs cannot
display web pages
on the Internet.
Web pages
Use the ping utility (discussed in the
following section) to check whether your PC
can communicate with the device’s LAN IP
address (by default 10.0.0.2). If it cannot,
check the Ethernet cabling.
If you statically assigned a private IP
address to the computer, (not a registered
public address), verify the following:
•
Check that the gateway IP address
on the computer is your public IP
address (see Current Status for
instructions on viewing the IP
information.) If it is not, correct the
address or configure the PC to
receive IP information
automatically.
•
Verify with your ISP that the DNS
server specified for the PC is valid.
Correct the address or configure
the PC to receive this information
automatically.
Verify that the DNS server IP address
specified on the PCs is correct for your ISP,
as discussed in the item above. If you
specified that the DNS server be assigned
dynamically from a server, then verify with
your ISP that the address configured on the
Wireless Gateway is correct, then You can
use the ping utility, to test connectivity with
your ISP’s DNS server.
11n AP Router User’s Manual
Problem
Troubleshooting Suggestion
I forgot/lost my user
ID or password.
If you have not changed the password from
the default, try using “admin” the user ID
and “administrator“ as password. Otherwise,
you can reset the device to the default
configuration by pressing the Reset Default
button on the Rare panel of the device (see
Rare Panel). Then, type the default User ID
and password shown above. WARNING:
Resetting the device removes any custom
settings and returns all settings to their
default values.
Use the ping utility, discussed in the
following section, to check whether your PC
can communicate with the device’s LAN IP
address (by default 10.0.0.2). If it cannot,
check the Ethernet cabling.
Verify that you are using Internet Explorer or
Netscape Navigator v4.0 or later.
Verify that the PC’s IP address is defined as
being on the same subnet as the IP address
assigned to the LAN port on the Wireless
Gateway.
I cannot access the
web pages from my
browser.
My changes to the
web pages are not
being retained.
Be sure to use the Confirm Changes/Apply
function after any changes.
129
11n AP Router User’s Manual
Diagnosing Problem using IP Utilities
ping
Ping is a command you can use to check whether your PC can
recognize other computers on your network and the Internet. A
ping command sends a message to the computer you specify. If
the computer receives the message, it sends messages in reply.
To use it, you must know the IP address of the computer with
which you are trying to communicate.
On Windows-based computers, you can execute a ping
command from the Start menu. Click the Start button, and then
click Run. In the Open text box, type a statement such as the
following:
ping 10.0.0.2
Click OK. You can substitute any private IP address on your
LAN or a public IP address for an Internet site, if known.
If the target computer receives the message, a Command
Prompt window is displayed:
Figure 9:
Using the ping Utility
If the target computer cannot be located, you will receive the
message Request timed out.
Using the ping command, you can test whether the path to the
Wireless Gateway is working (using the preconfigured default
LAN IP address 10.0.0.2) or another address you assigned.
You can also test whether access to the Internet is working by
typing an external address, such as that for www.yahoo.com
(216.115.108.243). If you do not know the IP address of a
particular Internet location, you can use the nslookup command,
as explained in the following section.
From most other IP-enabled operating systems, you can
execute the same command at a command prompt or through a
system administration utility.
nslookup
You can use the nslookup command to determine the IP
address associated with an Internet site name. You specify the
common name, and the nslookup command looks up the name
in on your DNS server (usually located with your ISP). If that
130
11n AP Router User’s Manual
name is not an entry in your ISP’s DNS table, the request is
then referred to another higher-level server, and so on, until the
entry is found. The server then returns the associated IP
address.
On Windows-based computers, you can execute the nslookup
command from the Start menu. Click the Start button, and then
click Run. In the Open text box, type the following:
Nslookup
Click OK. A Command Prompt window displays with a bracket
prompt (>). At the prompt, type the name of the Internet address
that you are interested in, such as www.microsoft.com.
The window will display the associate IP address, if known, as
shown below:
Figure 10:
Using the nslookup Utility
There may be several addresses associated with an Internet
name. This is common for web sites that receive heavy traffic;
they use multiple, redundant servers to carry the same
information.
To exit from the nslookup utility, type exit and press [Enter] at
the command prompt.
131
11n AP Router User’s Manual
Glossary
10BASE-T
A designation for the type of wiring used by Ethernet
networks with a data rate of 10 Mbps. Also known as
Category 3 (CAT 3) wiring. See data rate, Ethernet.
100BASE-T
A designation for the type of wiring used by Ethernet
networks with a data rate of 100 Mbps. Also known as
Category 5 (CAT 5) wiring. See data rate, Ethernet.
ADSL
Asymmetric Digital Subscriber Line
The most commonly deployed "flavor" of DSL for home users
is asymmetrical DSL. The term asymmetrical refers to its
unequal data rates for downloading and uploading (the
download rate is higher than the upload rate). The
asymmetrical rates benefit home users because they
typically download much more data from the Internet than
they upload.
analog
An analog signal is a signal that has had its frequency
modified in some way, such as by amplifying its strength or
varying its frequency, in order to add information to the signal.
The voice component in DSL is an analog signal. See digital.
ATM
Asynchronous Transfer Mode
A standard for high-speed transmission of data, text, voice,
and video, widely used within the Internet. ATM data rates
range from 45 Mbps to 2.5 Gbps. See data rate.
authenticate
To verify a user’s identity, such as by prompting for a
password.
binary
The "base two" system of numbers, that uses only two digits,
0 and 1, to represent all numbers. In binary, the number 1 is
written as 1, 2 as 10, 3 as 11, 4 as 100, etc. Although
expressed as decimal numbers for convenience, IP
addresses in actual use are binary numbers; e.g., the IP
address 209.191.4.240 is
11010001.10111111.00000100.11110000 in binary. See bit,
IP address, network mask.
bit
Short for "binary digit," a bit is a number that can have two
values, 0 or 1. See binary.
bps
bits per second
bridging
Passing data from your network to your ISP and vice versa
using the hardware addresses of the devices at each location.
Bridging contrasts with routing, which can add more
intelligence to data transfers by using network addresses
instead. The Wireless Gateway can perform both routing and
bridging. Typically, when both functions are enabled, the
device routes IP data and bridges all other types of data. See
routing.
broadband
A telecommunications technology that can send different
types of data over the same medium. DSL is a broadband
technology.
broadcast
To send data to all computers on a network.
DHCP
Dynamic Host Configuration Protocol
DHCP automates address assignment and management.
132
11n AP Router User’s Manual
When a computer connects to the LAN, DHCP assigns it an
IP address from a shared pool of IP addresses; after a
specified time limit, DHCP returns the address to the pool.
DHCP relay
Dynamic Host Configuration Protocol relay
A DHCP relay is a computer that forwards DHCP data
between computers that request IP addresses and the DHCP
server that assigns the addresses. Each of the Wireless
Gateway's interfaces can be configured as a DHCP relay.
See DHCP.
DHCP server
Dynamic Host Configuration Protocol server
A DHCP server is a computer that is responsible for
assigning IP addresses to the computers on a LAN. See
DHCP.
digital
Of data, having a form based on discrete values expressed
as binary numbers (0's and 1's). The data component in DSL
is a digital signal. See analog.
DNS
Domain Name System
The DNS maps domain names into IP addresses. DNS
information is distributed hierarchically throughout the
Internet among computers called DNS servers. For example,
www.yahoo.com is the domain name associated with IP
address 216.115.108.243. When you start to access a web
site, a DNS server looks up the requested domain name to
find its corresponding IP address. If the DNS server cannot
find the IP address, it communicates with higher-level DNS
servers to determine the IP address. See domain name.
domain name
A domain name is a user-friendly name used in place of its
associated IP address. Domain names must be unique; their
assignment is controlled by the Internet Corporation for
Assigned Names and Numbers (ICANN). Domain names are
a key element of URLs, which identify a specific file at a web
site. See DNS.
download
To transfer data in the downstream direction, i.e., from the
Internet to the user.
DSL
Digital Subscriber Line
A technology that allows both digital data and analog voice
signals to travel over existing copper telephone lines.
encryption keys
See network keys
Ethernet
The most commonly installed computer network technology,
usually using twisted pair wiring. Ethernet data rates are 10
Mbps and 100 Mbps. See also 10BASE-T, 100BASE-T,
twisted pair.
FTP
File Transfer Protocol
A program used to transfer files between computers
connected to the Internet. Common uses include uploading
new or updated files to a web server, and downloading files
from a web server.
Gbps
Abbreviation of Gigabits per second, or one billion bits per
second. Internet data rates are often expressed in Gbps.
host
A device (usually a computer) connected to a network.
HTTP
Hyper-Text Transfer Protocol
HTTP is the main protocol used to transfer data from web
133
11n AP Router User’s Manual
sites so that it can be displayed by web browsers. See web
browser, web site.
Hub
A hub is a place of convergence where data arrives from one
or more directions and is forwarded out in one or more
directions. It connects an Ethernet bridge/router to a group of
PCs on a LAN and allows communication to pass between
the networked devices.
ICMP
Internet Control Message Protocol
An Internet protocol used to report errors and other networkrelated information. The ping command makes use of ICMP.
IEEE
The Institute of Electrical and Electronics Engineers is a
technical professional society that fosters the development of
standards that often become national and international
standards.
Internet
The global collection of interconnected networks used for
both private and business communications.
intranet
A private, company-internal network that looks like part of the
Internet (users access information using web browsers), but
is accessible only by employees.
IP
See TCP/IP.
IP address
Internet Protocol address
The address of a host (computer) on the Internet, consisting
of four numbers, each from 0 to 255, separated by periods,
e.g., 209.191.4.240. An IP address consists of a network ID
that identifies the particular network the host belongs to, and
a host ID uniquely identifying the host itself on that network.
A network mask is used to define the network ID and the
host ID. Because IP addresses are difficult to remember,
they usually have an associated domain name that can be
specified instead. See domain name, network mask.
ISP
Internet Service Provider
A company that provides Internet access to its customers,
usually for a fee.
LAN
Local Area Network
A network limited to a small geographic area, such as a
home or small office.
LED
Light Emitting Diode
An electronic light-emitting device. The indicator lights on the
front of the Wireless Gateway are LEDs.
MAC address
Media Access Control address
The permanent hardware address of a device, assigned by
its manufacturer. MAC addresses are expressed as six pairs
of hex characters, with each pair separated by colons. For
example; NN:NN:NN:NN:NN:NN.
mask
See network mask.
Mbps
Abbreviation for Megabits per second, or one million bits per
second. Network data rates are often expressed in Mbps.
NAT
Network Address Translation
A service performed by many routers that translates your
network’s publicly known IP address into a private IP address
for each computer on your LAN. Only your router and your
LAN know these addresses; the outside world sees only the
public IP address when talking to a computer on your LAN.
134
11n AP Router User’s Manual
network
A group of computers that are connected together, allowing
them to communicate with each other and share resources,
such as software, files, etc. A network can be small, such as
a LAN, or very large, such as the Internet.
network mask
A network mask is a sequence of bits applied to an IP
address to select the network ID while ignoring the host ID.
Bits set to 1 mean "select this bit" while bits set to 0 mean
"ignore this bit." For example, if the network mask
255.255.255.0 is applied to the IP address 100.10.50.1, the
network ID is 100.10.50, and the host ID is 1. See binary, IP
address, subnet.
NIC
Network Interface Card
An adapter card that plugs into your computer and provides
the physical interface to your network cabling. For Ethernet
NICs this is typically an RJ-45 connector. See Ethernet, RJ45.
packet
Data transmitted on a network consists of units called
packets. Each packet contains a payload (the data), plus
overhead information such as where it came from (source
address) and where it should go (destination address).
ping
Packet Internet (or Inter-Network) Groper
A program used to verify whether the host associated with an
IP address is online. It can also be used to reveal the IP
address for a given domain name.
port
A physical access point to a device such as a computer or
router, through which data flows into and out of the device.
PPP
Point-to-Point Protocol
A protocol for serial data transmission that is used to carry IP
(and other protocol) data between your ISP and your
computer. The WAN interface on the Wireless Gateway uses
two forms of PPP called PPPoA and PPPoE. See PPPoA,
PPPoE.
PPPoA
Point-to-Point Protocol over ATM
One of the two types of PPP interfaces you can define for a
Virtual Circuit (VC), the other type being PPPoE. You can
define only one PPPoA interface per VC.
PPPoE
Point-to-Point Protocol over Ethernet
One of the two types of PPP interfaces you can define for a
Virtual Circuit (VC), the other type being PPPoA. You can
define one or more PPPoE interfaces per VC.
protocol
A set of rules governing the transmission of data. In order for
a data transmission to work, both ends of the connection
have to follow the rules of the protocol.
remote
In a physically separate location. For example, an employee
away on travel who logs in to the company’s intranet is a
remote user.
RIP
Routing Information Protocol
The original TCP/IP routing protocol. There are two versions
of RIP: version I and version II.
RJ-11
Registered Jack Standard-11
The standard plug used to connect telephones, fax machines,
modems, etc. to a telephone port. It is a 6-pin connector
usually containing four wires.
135
11n AP Router User’s Manual
RJ-45
Registered Jack Standard-45
The 8-pin plug used in transmitting data over phone lines.
Ethernet cabling usually uses this type of connector.
routing
Forwarding data between your network and the Internet on
the most efficient route, based on the data’s destination IP
address and current network conditions. A device that
performs routing is called a router.
SDNS
Secondary Domain Name System (server)
A DNS server that can be used if the primary DSN server is
not available. See DNS.
subnet
A subnet is a portion of a network. The subnet is
distinguished from the larger network by a subnet mask that
selects some of the computers of the network and excludes
all others. The subnet's computers remain physically
connected to the rest of the parent network, but they are
treated as though they were on a separate network. See
network mask.
subnet mask
A mask that defines a subnet. See network mask.
TCP
See TCP/IP.
TCP/IP
Transmission Control Protocol/Internet Protocol
The basic protocols used on the Internet. TCP is responsible
for dividing data up into packets for delivery and
reassembling them at the destination, while IP is responsible
for delivering the packets from source to destination. When
TCP and IP are bundled with higher-level applications such
as HTTP, FTP, Telnet, etc., TCP/IP refers to this whole suite
of protocols.
Telnet
An interactive, character-based program used to access a
remote computer. While HTTP (the web protocol) and FTP
only allow you to download files from a remote computer,
Telnet allows you to log into and use a computer from a
remote location.
TFTP
Trivial File Transfer Protocol
A protocol for file transfers, TFTP is easier to use than File
Transfer Protocol (FTP) but not as capable or secure.
TKIP
Temporal Key Integrity Protocol (TKIP) provides WPA with a
data encryption function. It ensures that a unique master key is
generated for each packet, supports message integrity and
sequencing rules and supports re-keying mechanisms.
triggers
Triggers are used to deal with application protocols that create
separate sessions. Some applications, such as NetMeeting,
open secondary connections during normal operations, for
example, a connection to a server is established using one port,
but data transfers are performed on a separate connection. A
trigger tells the device to expect these secondary sessions and
how to handle them.
Once you set a trigger, the embedded IP address of each
incoming packet is replaced by the correct host address so that
NAT can translate packets to the correct destination. You can
specify whether you want to carry out address replacement, and
if so, whether to replace addresses on TCP packets only, UDP
packets only, or both.
twisted pair
The ordinary copper telephone wiring used by telephone
companies. It contains one or more wire pairs twisted
136
11n AP Router User’s Manual
together to reduce inductance and noise. Each telephone
line uses one pair. In homes, it is most often installed with
two pairs. For Ethernet LANs, a higher grade called Category
3 (CAT 3) is used for 10BASE-T networks, and an even
higher grade called Category 5 (CAT 5) is used for
100BASE-T networks. See 10BASE-T, 100BASE-T, Ethernet.
unnumbered interfaces
An unnumbered interface is an IP interface that does not
have a local subnet associated with it. Instead, it uses a
router-id that serves as the source and destination address
of packets sent to and from the router. Unlike the IP address
of a normal interface, the router-id of an unnumbered
interface is allowed to be the same as the IP address of
another interface. For example, the WAN unnumbered
interface of your device uses the same IP address of the
LAN interface (10.0.0.2).
The unnumbered interface is temporary – PPP or DHCP will
assign a ‘real’ IP address automatically.
upstream
The direction of data transmission from the user to the
Internet.
VC
Virtual Circuit
A connection from your DSL router to your ISP.
VCI
Virtual Circuit Identifier
Together with the Virtual Path Identifier (VPI), the VCI
uniquely identifies a VC. Your ISP will tell you the VCI for
each VC they provide. See VC.
VPI
Virtual Path Identifier
Together with the Virtual Circuit Identifier (VCI), the VPI
uniquely identifies a VC. Your ISP will tell you the VPI for
each VC they provide. See VC.
WAN
Wide Area Network
Any network spread over a large geographical area, such as
a country or continent. With respect to the Wireless Gateway,
WAN refers to the Internet.
Web browser
A software program that uses Hyper-Text Transfer Protocol
(HTTP) to download information from (and upload to) web
sites, and displays the information, which may consist of text,
graphic images, audio, or video, to the user. Web browsers
use Hyper-Text Transfer Protocol (HTTP). Popular web
browsers include Netscape Navigator and Microsoft Internet
Explorer. See HTTP, web site, WWW.
Web page
A web site file typically containing text, graphics and
hyperlinks (cross-references) to the other pages on that web
site, as well as to pages on other web sites. When a user
accesses a web site, the first page that is displayed is called
the home page. See hyperlink, web site.
Web site
A computer on the Internet that distributes information to
(and gets information from) remote users through web
browsers. A web site typically consists of web pages that
contain text, graphics, and hyperlinks. See hyperlink, web
page.
WWW
World Wide Web
137
11n AP Router User’s Manual
Also called (the) Web. Collective term for all web sites
anywhere in the world that can be accessed via the Internet.
138
Warning
Notice:
Any changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Notice:
1. This Transmitter must not be colocated or operating in conjunction with any other antenna
or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. Thisequipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
Label Requirement:This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Format                          : application/pdf
Title                           : Microsoft Word - Manual_STD_RE300R4-2T2R-V13_Eng_1408191335.doc
Creator                         : Candy
Create Date                     : 2014:08:26 15:09:45+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2014:11:14 11:31:47+08:00
Metadata Date                   : 2014:11:14 11:31:47+08:00
Producer                        : Acrobat Distiller 10.1.8 (Windows)
Document ID                     : uuid:04bb0abe-fcef-41bb-b6dc-67ca16364083
Instance ID                     : uuid:b64c76a4-69a4-451c-9668-1c9dea287afd
Has XFA                         : No
Page Count                      : 139
Author                          : Candy

EXIF Metadata provided by EXIF.tools