Weider 831159641 User Manual WEIGHT SYSTEM Manuals And Guides 1712327L
User Manual: Weider 831159641 831159641 WEIDER WEIGHT SYSTEM - Manuals and Guides View the owners manual for your WEIDER WEIGHT SYSTEM #831159641. Home:WEIDER:/ Weight System Parts:WEIDER weight system parts:#831159641 WEIDER weight system parts:#831159641 WEIDER weight system manual
Open the PDF directly: View PDF 
.
Page Count: 20
| Download | |
| Open PDF In Browser | View PDF |
Model No. 831.15964.1 Serial No. Write the serial number in the space above for reference. Serial Number Decal (under frame) • Assembly • Operation • Maintenance • Part List and Drawing Sears, Roebuck and Co. Hoffman Estates, IL 60179 CAUTION Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference. WEIGHT BENCH EXERCISER User’s Manual TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover 90 DAY FULL WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover WARNING DECAL PLACEMENT This drawing shows the location(s) of the warning decal(s). If a decal is missing or illegible, call 1-877-992-5999 and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. 2 IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your weight bench before using your weight bench. Sears assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. It is the responsibility of the owner to ensure that all users of the weight bench are adequately informed of all precautions. 10. Keep hands and feet away from moving parts. 11. Always wear athletic shoes for foot protection while using the weight bench. 2. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems. 12. The weight bench is designed to support a maximum user weight of 300 lbs. (136 kg), and a maximum total weight of 510 lbs. (231 kg). Do not place more than 210 lbs. (95 kg), including a barbell and weights (not included), on the weight rests. Do not place more than 130 lbs. (59 kg) on the leg lever. 3. The weight bench is not intended for use by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless they are given supervision or instruction about use of the weight bench by someone responsible for their safety. 13. Always place the same amount of weight on both ends of your barbell. While adding or removing weights, always keep some weight on both ends of your barbell to prevent the barbell from tipping. Always secure weights with your spring collars. 4. Use the weight bench only as described in this manual. 5. The weight bench is intended for home use only. Do not use the weight bench in any commercial, rental, or institutional setting. 14. Before you use the weight rests, make sure that the weight rests are properly attached to the uprights. In addition, make sure that the spotters are properly attached to the uprights. 6. Keep the weight bench indoors, away from moisture and dust. Do not put the weight bench in a garage or covered patio, or near water. 15. Always make sure that the locking pin is fully inserted into the seat frame and into the pivot bracket before you use the weight bench 7. Place the weight bench on a level surface, with enough clearance around the weight bench to mount, dismount, and use the weight bench. To protect the floor or carpet from damage, place a mat under the weight bench. 16. Always exercise with a partner. Your partner should be ready to catch your barbell if you cannot complete a repetition 8. Inspect and properly tighten all parts each time the weight bench is used. Replace any worn parts immediately. 17. Over exercising may result in serious injury or death. If you feel faint, if you become short of breath, or if you experience pain while exercising, stop immediately and cool down. 9. Keep children under age 13 and pets away from the weight bench at all times. 3 BEFORE YOU BEGIN Thank you for selecting the WEIDER® PRO 345 weight bench. The versatile PRO 345 weight bench is designed to develop every major muscle group of the body. Whether your goal is to have a shapely figure, dramatic muscle size and strength, or a healthier cardiovascular system, the weight bench will help you to achieve the specific results you want. reading this manual, please see the back cover of this manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual. Before reading further, please review the drawing below and familiarize yourself with the labeled parts. For your benefit, read this manual carefully before using the weight bench. If you have questions after Length: 6 ft. 8 in. (203 cm) Width: 3 ft. 7 in. (110 cm) Weight Rest Spotter Upright Olympic Adapter/Weight Storage Tube Backrest Seat Leg Lever Adjustment Knob Olympic Adapter/ Weight Tube Locking Pin Pivot Bracket Note: The terms “right side” and “left side” are determined relative to a person sitting on the weight bench; the terms do not correspond to right and left in the drawings in this manual. 4 PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in the hardware kit, check to see if it has been preassembled. Extra hardware may be included. If a part is missing, call 1-877-992-5999. M6 Washer (26) M8 Locknut (17) M4 x 19mm Screw (22) M8 Washer (16) M10 Washer (50) M10 Locknut (33) M6 x 40mm Screw (30) M12 Locknut (49) M8 x 45mm Screw (48) M8 x 20mm Screw (37) M8 x 80mm Bolt (43) M10 x 20mm Screw (47) M10 x 75mm Bolt (32) M10 x 70mm Bolt (34) M10 x 95mm Carriage Bolt (18) M12 x 88mm Bolt (40) 5 ASSEMBLY • Assembly requires two persons. • To identify small parts, see page 5. • Because of its weight and size, assemble the weight bench in the location where it will be used. Make sure that there is enough clearance to walk around the weight bench as you assemble it. • In addition to the included tool(s), assembly requires the following tools: one adjustable wrench one Phillips screwdriver • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.weiderservice.com/registration on your computer and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Care • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call 1-877-992-5999 and register your product. 2. Identify the Left and Right Stabilizers (13, 38). 2 Attach the Crossbar (3) and the Left Stabilizer (13) to an Upright (1) with four M10 x 95mm Carriage Bolts (18) and four M10 Locknuts (33); do not tighten the Locknuts yet. 1 Attach the Crossbar (3) and the Right Stabilizer (38) to the other Upright (1) in the same way. 1 38 3 18 6 33 33 13 33 18 3. Attach the Seat Frame (2) to the Lower Front Leg (8) with three M10 x 20mm Screws (47) and three M10 Washers (50); do not tighten the Screws yet. 3 47 2 47 50 50 8 4. Attach the Brace (44) to the Seat Frame (2) and the Lower Front Leg (8) with two M8 x 20mm Screws (37); do not tighten the Screws yet. 4 47 2 8 44 37 37 5. Attach the Seat Frame (2) to the Crossbar (3) with two M10 x 70mm Bolts (34) and two M10 Locknuts (33). 5 See steps 2–4. Tighten the M10 Locknuts (33), the M10 x 20mm Screws (47), and the M8 x 20mm Screws (37). 34 2 3 33 7 6. Insert a Pad Tube (10) into a hole in the Leg Lever (4). Slide a Foam Pad (23) onto each side of the Pad Tube. 6 Then, press a Foam Pad Cap (41) into each Foam Pad (23). 41 23 4 41 41 23 Attach the other Pad Tube (not shown), Foam Pads (23), and Foam Pad Caps (41) in the same way. 10 23 7. Using a plastic bag to keep your fingers clean, apply a generous amount of the included grease to an M10 x 75mm Bolt (32). 7 33 27 4 Attach the Leg Lever (4) to the Upper Front Leg (27) with the M10 x 75mm Bolt (32) and an M10 Locknut (33). Do not overtighten the Locknut; the Leg Lever must pivot easily. Grease 32 8. Loosen and pull the Adjustment Knob (31) outward and insert the Upper Front Leg (27) into the Lower Front Leg (8). 8 27 Move the Upper Front Leg (27) to the desired position, release the Adjustment Knob (31) into an adjustment hole in the Upper Front Leg, and then tighten the Adjustment Knob. 8 8 31 41 9. Attach the tether on the Locking Pin (36) to the Seat Frame (2) with an M4 x 19mm Screw (22). 9 2 22 36 10. Orient the Backrest Frame (5) so that the pivot tube is in the location shown. Make sure that there is a Backrest Frame Bushing (28) in each side of the pivot tube. If necessary, press a Backrest Frame Bushing into each side of the pivot tube. 10 5 Attach the Pivot Bracket (7) to the Backrest Frame (5) with two M8 x 80mm Bolts (43) and two M8 Locknuts (17); do not tighten the Locknuts yet. 28 Pivot Tube 11. Apply a small amount of grease to an M12 x 88mm Bolt (40). 17 43 28 7 11 Insert the Pivot Bracket (7) into the slot in the Seat Frame (2). 5 Next, attach the Backrest Frame (5) to the bracket on the Seat Frame (2) with the M12 x 88mm Bolt (40) and an M12 Locknut (49). Do not overtighten the Locknut; the Backrest Frame must pivot easily. Then, insert the Locking Pin (36) through the Seat Frame (2) and into one of the adjustment holes in the Pivot Bracket (7). 49 See step 10. Tighten the M8 Locknuts (17). 2 7 Grease 40 9 36 12. Attach an M10 x 20mm Bolt (47) and an M10 Locknut (33) to the hole in the end of the Pivot Bracket (7). 12 5 6 Then, attach the Backrest (6) to the Backrest Frame (5) with two M8 x 45mm Screws (48) and two M8 Washers (16). 16 48 16 33 13. Attach the Seat (11) to the Seat Frame (2) with four M6 x 40mm Screws (30) and four M6 Washers (26); start all the Screws, and then tighten them. 48 47 7 13 11 2 26 26 30 10 14. Insert a Weight Rest (29) into one of the adjustment holes into an Upright (1). Repeat this action for the other Weight Rest. Make sure that the Weight Rests are at the same height. 14 29 Then, insert a Spotter (24) into one of the adjustment holes in an Upright (1). Repeat this action for the other Spotter. Make sure that the Spotters are at the same height. 1 29 24 1 24 15. If you plan to use Olympic weights (not included) with the weight bench, perform this assembly step. 15 39 See the upper drawing. Slide an Olympic Adapter (25) onto the weight storage tube on the Left Stabilizer (13), and tighten the Set Screw (39) in the Olympic Adapter. Repeat this action for the Right Stabilizer (not shown). 25 13 See the lower drawing. Slide an Olympic Adapter (25) onto the weight tube on the Leg Lever (4), and tighten the Set Screw (39) in the Olympic Adapter. 25 39 4 16. Make sure that all parts are properly tightened before you use the weight bench. Extra parts may be included. The use of all remaining parts will be explained in ADJUSTMENT, beginning on page 12. 11 ADJUSTMENT The steps below explain how the weight bench can be adjusted. See the accompanying exercise guide to see the correct form for several exercises. Make sure that all parts are properly tightened each time you use the weight bench. Replace any worn parts immediately. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent; do not use solvents. ADJUSTING THE WEIGHT RESTS AND THE SPOTTERS 29 To adjust the height of the Weight Rests (29), first remove the Weight Rests from the Uprights (1), and then insert them into the desired adjustment holes in the Uprights. Make sure that the Weight Rests are at the same height. 1 29 24 To adjust the height of the Spotters (24), first remove the Spotters from the Uprights (1), and then insert them into the desired adjustment holes in the Uprights. Make sure that the Spotters are at the same height. 1 24 WARNING: Do not place more than 210 lbs. (92 kg) on the Weight Rests (29). Always place both Weight Rests at the same height and both Spotters (24) at the same height. ADJUSTING THE BACKREST The Backrest (6) can be used in several positions. To adjust the position of the Backrest, remove the Locking Pin (36), move the Backrest to the desired position, and then insert the Locking Pin through the Seat Frame (2) into an adjustment hole in the Pivot Bracket (7). 6 36 7 12 2 ADJUSTING THE UPPER FRONT LEG To adjust the height of the Upper Front Leg (27), first loosen and pull the Adjustment Knob (31) outward. Move the Upper Front Leg (27) to the desired position, release the Adjustment Knob (31) into an adjustment hole in the Upper Front Leg, and then tighten the Adjustment Knob. 27 4 When the Leg Lever (4) is not in use, remove the Upper Front Leg (27) and store it away from the weight bench. 31 ATTACHING WEIGHTS TO THE LEG LEVER If you plan to use Olympic weights (not included) with the weight bench, see assembly step 15 and attach the three Olympic Adapters (25) to the weight bench. To use the Leg Lever (4), slide the desired weights (not included) onto the weight tube on the Leg Lever. Secure the weights with the Spring Collar (45) or the Olympic Spring Collar (46). 25 4 WARNING: Do not place more than 130 lbs. (59 kg) on the Leg Lever (4). 25 Weight Tube 45, 46 Weight STORING WEIGHTS If you plan to use Olympic weights (not included) with the weight bench, see assembly step 15 and attach the three Olympic Adapters (25) to the weight bench. 38 25 Store weights (not included) by placing them on the weight storage tubes on the Left and Right Stabilizers (13, 38). 13 13 Weight Storage Tube EXERCISE GUIDELINES FOUR TYPES OF STRENGTH WORKOUTS workout, and the numbers of repetitions and sets to complete. Progress at your own pace and be sensitive to your body’s signals. Follow each workout with at least one day of rest. Note: A “repetition” is one complete cycle of an exercise, such as one sit-up. A “set” is a series of repetitions. Warming Up—Start with 5 to 10 minutes of stretching and light exercise. A warm-up increases your body temperature, heart rate, and circulation in preparation for exercise. Muscle Building—Work your muscles near their maximum capacity and progressively increase the intensity of your exercise. Adjust the intensity level of an individual exercise as follows: • Change the amount of resistance used. • Change the number of repetitions or sets performed. Working Out—Include 6 to 10 different exercises in each workout. Select exercises for every major muscle group, emphasizing areas that you want to develop. To give balance and variety to your workouts, vary the exercises from workout to workout. Use your own judgment to determine the amount of resistance that is right for you. Begin with 3 sets of 8 repetitions for each exercise you perform. Rest for 3 minutes after each set. When you can complete 3 sets of 12 repetitions without difficulty, increase the amount of resistance. Cooling Down—Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles and helps to prevent post-exercise problems. Toning—Tone your muscles by working them to a moderate percentage of their capacity. Select a moderate amount of resistance and increase the number of repetitions in each set. Complete as many sets of 15 to 20 repetitions as possible without discomfort. Rest for 1 minute after each set. Work your muscles by completing more sets rather than by using high amounts of resistance. EXERCISE FORM Move through the full range of motion for each exercise and move only the appropriate parts of the body. Perform the repetitions in each set smoothly and without pausing. The exertion stage of each repetition should last about half as long as the return stage. Exhale during the exertion stage of each repetition and inhale during the return stroke. Never hold your breath. Weight Loss—To lose weight, use a low amount of resistance and increase the number of repetitions in each set. Exercise for 20 to 30 minutes, resting for a maximum of 30 seconds between sets. Rest for a short period of time after each set: • Muscle Building—Rest for three minutes after each set. • Toning—Rest for one minute after each set. • Weight Loss—Rest for 30 seconds after each set. Cross Training—Combine strength training and aerobic exercise by following this type of program: • Strength training workouts on Monday, Wednesday, and Friday. • 20 to 30 minutes of aerobic exercise on Tuesday and Thursday. • One full day of rest each week to give your body time to regenerate. STAYING MOTIVATED For motivation, keep a record of each workout. Write the date, the exercises performed, the resistance used, and the numbers of sets and repetitions completed. Record your weight and key body measurements once a month. To achieve good results, make exercise a regular and enjoyable part of your life. WORKOUT GUIDELINES Familiarize yourself with the equipment and learn the proper form for each exercise. Use your own judgment to determine the appropriate length of time for each 14 EXERCISE LOG Make copies of this page, and use the copies to schedule and record your strength and aerobic workouts. Scheduling and recording your workouts will help you to make exercise a regular and enjoyable part of your life. Strength Date: Exercise 6. 2. 7. 3. 8. 4. 9. 5. 10. Exercise Strength Date: Exercise Time Lbs. Sets Reps 6. 2. 7. 3. 8. 4. 9. 5. 10. Exercise Strength Date: Exercise Time Lbs. Sets Reps 6. 2. 7. 3. 8. 4. 9. 5. 10. Exercise Time 15 Speed Distance Speed Lbs. Sets Reps Exercise 1. Distance Lbs. Sets Reps Exercise 1. Aerobic Date: Lbs. Sets Reps Exercise 1. Aerobic Date: Aerobic Date: Lbs. Sets Reps Distance Speed NOTES 16 NOTES 17 PART LIST Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 2 1 1 1 1 1 1 1 2 2 1 1 1 2 2 2 2 8 1 1 3 1 4 2 3 4 1 Model No. 831.15964.1 R1215A Description Key No. Qty. Upright Seat Frame Crossbar Leg Lever Backrest Frame Backrest Pivot Bracket Lower Front Leg Round Cap Pad Tube Seat Front Leg Cap Left Stabilizer Storage Tube Cap Upright Cap M8 Washer M8 Locknut M10 x 95mm Carriage Bolt Backrest Frame Cap Post Bushing Leg Lever Cap M4 x 19mm Screw Foam Pad Spotter Olympic Adapter M6 Washer Upper Front Leg 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 * * * 2 2 4 1 1 12 2 6 1 2 1 3 1 4 4 2 1 1 1 4 2 1 3 – – – Description Backrest Frame Bushing Weight Rest M6 x 40mm Screw Adjustment Knob M10 x 75mm Bolt M10 Locknut M10 x 70mm Bolt Frame Cap Locking Pin/Tether M8 x 20mm Screw Right Stabilizer Set Screw M12 x 88mm Bolt Foam Pad Cap Plug M8 x 80mm Bolt Brace Spring Collar Olympic Spring Collar M10 x 20mm Bolt/Screw M8 x 45mm Screw M12 Locknut M10 Washer User’s Manual Exercise Guide Grease Packet Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. If a part is missing, call 1-877-992-5999. *These parts are not illustrated. 18 19 25 39 21 23 23 9 4 21 10 23 9 8 20 27 21 33 12 47 50 41 44 26 31 35 32 50 30 47 11 28 5 6 37 30 49 26 47 35 2 48 33 50 28 16 17 40 47 17 7 43 48 22 34 16 19 33 36 1 45 18 3 38 25 46 33 33 24 29 1 15 42 33 33 14 39 42 13 18 25 EXPLODED DRAWING Model No. 831.15964.1 R1215A 90 DAY FULL WARRANTY If this Sears Weight Bench Exerciser fails due to a defect in material or workmanship within 90 days of the date of purchase, call 1-800-4-MY-HOME® (1-800-469-4663) to arrange for free repair (or replacement if repair proves impossible). This warranty does not apply when the Weight Bench Exerciser is used commercially or for rental purposes. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., Hoffman Estates, IL 60179 Part 380176 R1215A Printed in China © 2015 ICON Health & Fitness, Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 20 Producer : Mac OS X 10.9.5 Quartz PDFContext Create Date : 2015:12:09 15:46:20Z Modify Date : 2015:12:09 15:46:20ZEXIF Metadata provided by EXIF.tools