Weider Mini Stepper Weemsm1793 Users Manual *WEEMSM1793O 204317(UK)

Weider-Weemsm17930-Owner-S-Manual weider-weemsm17930-owner-s-manual

2015-05-18

: Weider Weider-Mini-Stepper-Weemsm1793-Users-Manual-733612 weider-mini-stepper-weemsm1793-users-manual-733612 weider pdf

Open the PDF directly: View PDF PDF.
Page Count: 4

DownloadWeider Weider-Mini-Stepper-Weemsm1793-Users-Manual- *WEEMSM1793O-204317(UK) Weider-mini-stepper-weemsm1793-users-manual
Open PDF In BrowserView PDF
Model No. WEEMSM17930

USER’S MANUAL

QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, please call:

08457 089 009
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Leeds
LS11, 8JG
Great Britain (GB)
csuk@iconeurope.com

CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.

Visit our website at
www.iconeurope.com

Important Precautions
WARNING:

To reduce the risk of serious injury, read the following precautions and all
instructions in this manual before using the WEIDER® Mini Stepper.
1. It is the responsibility of the owner to ensure
that all users of the stepper are adequately
informed of all precautions.

8. Always wear appropriate clothes, including
athletic shoes for foot protection, when using
the stepper.

2. Use the stepper only as described.

9. Always keep your feet on the pedals when
stepping and be careful not to lose your balance. It is recommended that you place the
stepper near a wall or a chair for support.

3. The stepper is intended for home use only.
Do not use the stepper in a commercial,
rental, or institutional setting.

10. The resistance cylinders become very hot
during use. Allow the resistance cylinders to
cool before touching them.

4. Place the stepper on a level surface. Cover
the floor beneath the stepper to protect the
floor or carpet.
5. Inspect and properly tighten all parts often.
Replace any worn parts immediately.

11. Make sure that the cable remains on the pulley. If the cable binds, stop exercising and
make sure that the cable is on the pulley.

6. Keep children under the age of 12 and pets
away from the stepper at all times.

12. If you feel pain or dizziness at any time whilst
exercising, stop immediately and cool down.

7. Keep hands and feet away from moving parts.

WARNING:

Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

Before You Begin
For your benefit, read this manual carefully before
using the Mini Stepper. If you have questions after
reading this manual, please call our Customer Service
Department at 0845 7089 009. To help us assist you,
please mention the product model number
(WEEMSM17930) when calling.

Thank you for selecting the new WEIDER® Mini
Stepper. Stepping is one of the most effective exercises for increasing cardiovascular fitness, building
endurance, and toning the body. The compact WEIDER® Mini Stepper lets you enjoy this exercise in the
convenience of your own home.

WEIDER is a registered trademark of ICON Health & Fitness, Inc.

2

Assembly

Using the Stepper
INSTALLING BATTERY

1. Plug the Reed Switch Wire (8) into the jack on the
back of the Monitor (7). Push the excess Reed
Switch Wire down into the Mounting Cap (17).
Slide the Monitor onto the tab on the Mounting
Cap, being careful to avoid pinching the Reed
Switch Wire. IMPORTANT: If there is a sheet of
clear plastic on the Monitor, remove it. Make
sure to keep liquids away from the Monitor and
keep the Monitor out of direct sunlight.

The monitor requires one 1.5V “AAA” battery. Slide
the monitor off the mounting tab (see drawing 1 at the
left). Remove the battery cover from the back of the
monitor. Insert the battery into the monitor, with the
negative (–) ends of the battery touching the springs.
Reattach the battery cover. Make sure that the reed
switch wire is plugged into the jack on the back of the
monitor, and carefully slide the monitor back onto the
mounting tab. IMPORTANT: Make sure to remove
the battery when storing the stepper.

1
8
Tab

7
17

2. Raise both Pedal Arms (12, 13) to the position
shown. Insert the shaft on the U-bracket (24) into
the round tube on the Base (1). Route the Cable
(22) around the Pulley (23). Push down the Pedal
Arms, making sure that the Cable remains around
the Pulley.

MONITOR OPERATION
1. To turn on the monitor, press either of the buttons
on the monitor or begin stepping.
2. To start the monitor, press the ST/STOP button.
The STOP indicator will disappear from the display. As you step, the monitor will display the total
number of steps you have completed and the
elapsed time. To stop the monitor, press the
ST/STOP button again. The STOP indicator will
reappear.

2

12
13
24

3. To reset the monitor, press the RESET button.
23

22

4. To turn off the monitor, simply stop exercising. If
the pedals are not moved and the buttons are not
pressed for a few minutes, the monitor will turn off
to conserve the batteries.

3

Ordering Replacement Parts
If you encounter any problems with the stepper, or if replacement parts are needed, contact the ICON Health &
Fitness, Ltd. office at the numbers listed below or write to the address on the front cover of this manual.
Tel: 0845 7089 009
Outside the UK: +44 0113 3877 133
Fax: +44 0113 3877 125
When ordering parts, please mention:
• the model number of the product (WEEMSM17930)
• the name of the product (WEIDER® Mini Stepper)
• the key number and description of the needed part(s) (see the PART LIST and EXPLODED DRAWING below)

Part List and Exploded Drawing
Key
No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22

1
2
1
1
4
4
1
1
2
8
4
1
1
2
4
2
1
4
2
2
2
1

Key
No. Qty.

Description
Base
Front Base Cap
Pulley Bushing
3/8” x 40mm Bolt
M8 x 38mm Bolt
M8 Nylon Locknut
Monitor
Reed Switch/Wire
Resistance Cylinder
Cylinder Bushing
Screw
Right Pedal Arm
Left Pedal Arm
Pedal
Pedal Arm Cap
Bumper
Mounting Cap
M6 x 38mm Screw
M8 x 16mm Screw
Small Axle Washer
13
Split Washer
15
Cable
21

23
24
25
26
27
28
*

Pulley
U-bracket
Magnet
Bolt Cap
Rear Base Cap
3/8” Nylon Locknut
User’s Manual (not illustrated)

7

15
11

17

14

12

8
10 5
25

5

18
15
16
11

6

2

2

6

10

18

9

27 10

14

4

1

3
22

20

6

6

15
5

24

10

18
18
5 16
11

Part No. 204317 R0905A

1
1
1
2
2
1
1

19 26
20 21

19
26

Description

28

27

23

10

10
9

10

Printed in China © 2005 ICON Health & Fitness, Inc.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2007:12:20 14:31:27Z
Creator Tool                    : QuarkXPress(tm) 6.5
Modify Date                     : 2007:12:20 14:32:57-07:00
Metadata Date                   : 2007:12:20 14:32:57-07:00
Producer                        : QuarkXPress(tm) 6.5
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%DocumentCustomColors: (PANTONE 485 C).%%CMYKCustomColor: 0 .95 1 0 (PANTONE 485 C).%%EndComments
Format                          : application/pdf
Title                           : *WEEMSM1793O-204317(UK)
Document ID                     : uuid:21b8a00c-af43-11dc-9589-000a95c4125e
Instance ID                     : uuid:21b8a598-af43-11dc-9589-000a95c4125e
Page Count                      : 4
Creator                         : QuarkXPress(tm) 6.5
EXIF Metadata provided by EXIF.tools

Navigation menu