Weiyang Electric Wire and Cable WYSSS Wireless Home Security System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	268318
Application ID	dIu2kqk+oNaZxbd58In+FQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	319.62kB (3995278 bits)
Date Submitted	2002-09-05 00:00:00
Date Available	2002-09-05 00:00:00
Creation Date	2002-08-23 19:49:50
Producing Software	Acrobat 5.0 Scan Plug-in for Windows
Document Lastmod	2002-08-30 14:40:56
Document Title	User Manual
Document Creator	Acrobat 5.0 Scan Plug-in for Windows

System Overview
The WeiYang Security Surveillance System (WY SSS) has two application modes, which
comply with the Plug-and-Play function of the Microsofi Windows operation systems.
0 RF Video Mode:
The video signals of one to four cameras are transmitted with radio frequency. A RX
MODULE receiver near the PC circularly captures the video signals of the cameras
by changing the RF channel in sequence. These video signals are then sent to the PC
through a USB connector. At the same time, the PC is also informed the
corresponding RF channel of the video signal.
TV “1
0 Sensor mode:
The sensor signals of one to four sets are transmitted with radio frequency and
then sent to PC through RX MODULE, and the user will be immediately
informed by the e-mail when an alarm occurs
l Remit: u
(PIR serum or window lemon or shock “more.“ ...)
The WYSSS has the following specifications
The user can monitor the camera videos on the sewer PC
The camera videos can be monitored through Internet and simply using IE or
Netscape web-browser. The alarm recorder is also dynamically shown in the
browser
The Internet transmission of the image is in JPEG format The compression rate of
IPEG is adjustable, so that the user can uses high compression rate in sacrifice of
some image quality when Internet is jam
The system can detect the moving objects and generate alarm signalsf
The user will be immediately informed by an email when an alarm occurs
An alarm record file saves the alarm events
Videos are recorded as AVI files in a compression form and can be accessed by
Intemet
Each AVI file records the video of a fixed time interval The time interval can be
selected, so that the size of an AVI file is not too large and then suitable for Internet
access
One to four sensors are transmitted with radio frequency, and a ball sign will appear
in the PC screen when a sensor is tricked.
Afl‘right fimction
The sensor system automatically generates a 110 dB alarm sound to afl'right ingoing
persons
UPS function
Uninterruptible power supply is provided for the main transmitter, so that the system
still works even if the AC power supply system is shut down,
Night-viewing function
Video signals can be captured by day as well as by night
System Requirements
Pentium II CPU or above
Operation system Windows 98, ME, 2000
64MB Dram
IZMB hard disk space for the programs
10GB hard disk space for video recording
One USB pon
CD Rom player
Install and Remove
0 Install the WYSSS sofiwarc
lnsen the sofiware CD in the CD Rom and always click [NEXT] to finish the
installation ofthe WYSSS application sofiware.
0 Remove the WYSSS sofiware
Use [Add/Remove Programs] under [Control Panel] to select the program WYSSS.
and then click [Remove] to remove the application program.
Hardware Drive Installation
0 If you never istall multimedia program, you need install it by Windows 98 CD driver
in advance.
0 Windows 98/Md2000 Hardware Dn've are installed the same step.
It is very important to know the following points before using the WYSSS soflware. If
the user does not follow the below rules, the WYSSS software may work abnormally.
OAfier installation of the WYSSS hardware, please click right button of the mouse at
[start]>[action]>[open]>[revies] click[revicw], go to CD»R index and designate
installation index:
X : \PV321C\DRIVER\W1N98 $2 WINZK (X : represent CD-R) install setupexe
"Note"
Please install the driver of PV321 in advance. and then restart computer“ Plug-in
USB to interface of computer , and then computer can detect PV32|C Capture
correctly.
Afler restarting company. the system can be automatic research for SPCASOGA,
Sunplus Video Capture.
You also can go to [My Computer] and select [Properties], and then [Device
Manager], finally check if there are [HID-compliant device] and [SPCA506A, Sunplus
Video Capture], If they do not appear. you should repeat the hardware setup.
N elwovk udafilet:
' mm" rhviees
Pom (can a LPI]
5mm, video and game mam
System device:
Uri-veld Sand Bus name-u.
0 Do not use monitor screen saver. Always let the computer on. Set [Display
Properties] as follows.
0 If you have installed an antivirus sofiware, you should delete all scheduled tasks and
close the live update.
0 Close all application sofiware. if you want to select the no-stop recording.
0 If the WYSSS sofiware is suspended and has no response, please restart the
computer and rum ofi‘ and then turn on the power of the receiver box of the WYSSS
system Otherwise‘ the WYSSS may not work normally.
0 Test video.
Use the execution file CAPTESTEXE in the CD to test the video signal. Double
click CAPTESTEXE. it will prompt the window as follows. Select
[Options]—)[Compression], and then see if there is the Intel Indeo® Video R32 in
the video compression window. If there is no, the user should select
[Options]-)[Video Source] and adjust any item in the [Camera Controls] in the
video source window. This should be done repeatedly until the Intel Indeo® V|deo
R32 is in the video compression window.
User’s Guide and Settings
The application soflware of WYSSS has a setting wizard to guide the user to easily
make all settings. All setting parameters except [Recording Compression Format] can be
saved in a user‘s assigned file, which can be directly recalled at the next time.
ln the following, Click the Button means to move the mouse pointer to the Button
and click the lefl button of the mouse
0 First Step
Remove all USB type web cam from the computer and plug in the WYSSS receiver
to the computer. The WYSSS will capture the other video source if there is any web
cam plugged in
0 Setting Wizard
Once the application sofiware is executed, the setting wizard is automatically
prompted on the screen. which guide the user to make the following settings in
sequence [Home Page Setting]. [E-mail Setting], [Recording Mode Setting],
[Moving Object Detection Setting], and [Save Parameters].
55 9¥lom§5l3§tsie5§ettin g
The window of the [Home Page Setting] is shown as follows.
F Default
6“ Setting File Illserl ' g]
”tux."
{a
[Default]: Use the system default values for the setting parameters.
[Setting File]: Call a file that previously saved the setting parameters The sofiware
provides four files (Userl, User2, Uscr3, and User4). However, the user can still
choose [Other] option and click the icon of [Open File] to find a special file that
previously saved the parameters. As was mentioned above, [Selection of Camera]
and [Recording Compression Format] cannot be saved, so the user still should
make these two settings
[IP]: The Internet protocol address of the server computer, which is automatically found
out by the software.
[Home Page]: The web site address of the soflware, which is also automatically
generated by the soflware. Indeed, it is the [P address plus “lindexhtm”.
[User’s Name]: The 1D to enter the web site. it can be any combination of the alphabetic
and Arabic number. The number ofletters is not restricted.
[Password]: The password to enter the web site, It can be any combination of the
alphabetic and Arabic numbers. The number of letters is not restricted.
[LOGO] The user can select any image file in JPG or BMP with the size of I60x120
pixels as the home page logo. The default is the trade mark of Wei Yang Co.
[Compression Rate]: The compression rate of the video to be send by web sewer.
lligher compression rate requires less transmission time but has worse picture
quality.
As the user has filled out all settings of this window, the button of [Next] is then
prompted, It is suggested to press [Next] If [Main] is chosen, the setting wizard will be
immediately closed and the main window appears. However, a warning window of [Setting
is not completed] will appear before go to the main window
0 E-mail Setting
The second setting is the [E-mail Setting], which is shown in the following figure.
When a moving is detected, an alarm is triggered. At this moment, an alarm
notification will be sent out by email.
SMTP zm—————
Outgoing Port lief—MM“-
Aocount zfiW—
Sender Name ' PM
Sender Add v W
nng®weryang com M
test
[SMTP]: The outgoing mail (SMTP) sewer. Please refer to the usage of Outlook
Express (open [Outlook Express] and click [Tools] -> [Accounts] -> [Mail]
-> [Propenies] -> [Servers]).
[Account]: The user’s account name in the SMTP server (see [Servers] under [Outlook
Express]).
10
[Outgoing Port]: The sewer port number for the outgoing mail. Nomally it is 25. Please
refer to the usage of Outlook Express (open [Outlook Express] and click
[Tools] -> [Accounts] -_> [Mail] -> [Properties] -> [Advanced]).
w“
Wflmflhnatm
[Sender Name]: The name of the sender (see [General] under [Outlook Express]).
[Sender Add]: The e-mail address of the sender (see [General] under [Outlook
Express]).
[Receiver Add]: The e-mail address of the receiver.
[Cc]: The receivers of the mail copies.
[Subject]: The subject of the email. The default is “Alarm!”..
[Attached File]: The default file is “alann-letterjpg”. which is the image file captured
just afier the alarm is alerted. Usually, it is recommended not to attach a file for
the high priority to send out the email.
[Context]: The default is “Alarm!!!”. It is suggested as short as possible.
As the user has filled out all settings of this window, the button of [Next] is then
prompted, It is suggested to press [Next]. lf [Main] is chosen, the setting wizard will be
immediately closed and the main window appears. However, a warning window of [Setting
is not completed] will appear before go to the main window,
Il
0 Recording Mode Setting
The fourth step is the [Recording mode Setting],
Recording Mode
all
e m
B Program rm
@ rsss
Imallndeolfilvm F112
[File Length]: The maximum length of each video recording file. The unit is second,
This is fixed 1010 see and cannot be changed
[Folder]: The folder to save the video recording files. The default is the subfolder
“Video“ under the execution folder of the sofiware. The name of the recording
file is Vn-haur_min_sec(momh.dayycar).avi. For example,
“V2-l5_4_0(l,3l2002).avi" is the video of Camera 2 at [5:04:00 on January
3", 2002,
[Mode]: For no-stop recording from the start please select [Continuous Recording], The
option of [Alarm Period] means that the video only in the alarming interval will
be recorded and the recording stops once the alarm is released It" [After an
Alarm] is selected, the no-stop recording starts afier the first alarm event
happens. [No recording] disables the recording ability.
[Lack of Disk Space]: The recording will be stopped when the free space of the hard
12
disk to record the video is less than the amount MB that the user specifies.
[Compression Format]: It is recommended to select “Intel lndeo (R) Video R32". which
is though not the best compression format, but can be played in all operation
system of PC. If no compression format is selected, the size of the video file will
he very large, and not suitable for the Internet transmission. Note also that it is
suggested to set the key frame every “1“ frame.
As the user has filled out all settings of this window, the button of [Next] is then
prompted It is suggested to press [Next] If [Main] is chosen, the setting wizard will be
immediately closed and the main window appears However, a warning window oflSetting
is not completed] will appear before so to the main window
I]
0 Moving Object Detection Setting
The fifth step is the [Moving Object Detection Setting
[On/Off]: To turn on or off the detection function for moving object. When a moving
object is detected, an alarm event is generated, which will be shown on the main
window and saved is a file named “alarm-recorded” in the same directory as that
for video recording files.
[Sampling Rate]: The soflware analyzes the video very n frames. If n=l, then every
frame is taken into account for the moving object detection.
[Detection Parameters]: These two parameters are used as the criterion for triggering the
alarm. An alarm event is generated when the [Ratio of Moving
Pixels] over the total pixels is over the specified value. The
difference of the brightness of a pixel in the sequential frames is
over the [Optic Tolerance], this pixel is seen as a moving pixel.
I4
[Alarm Siren]. Select [Mute] to disable the siren. In the [Siren] option, there are five
default siren files to be selected, However, the user can also select his
own sound file for the siren by select [Others] and clicking the icon of
[Open File].
[Event & E—mail Intervals] The [Event Interval] is used to restrict the next alarm event
to be generated in the time interval afier the present alarm is released. The
[E-mail Interval] asks the minimum time required to send the next email. if the
[E—mail Interval] is greater than [Event Interval], some email of the notification of
the alarm event will not be sent. It is then recommended to select the
[Synchronization] mode. which ensures that every alarm event generates an
email.
[Disable]: This will disable the function to send e-mails ifthis is selected.
As the user has filled out all settings of this window, the button of [Finish] is then
prompted. It is suggested to press [Finish]. If [Main] is chosen, the setting wizard will be
immediately closed and the main window appears. However, a warning window of [Setting
is not completed] will appear before go to the main window.
When click [Finish], a [Save Settings] window is prompted. The user can save the
setting parameters just filled in a specified file. The software provides live default files:
User], UserZ, User}. User4, User5. Of course, the user can click [Cancel] to abort saving.
15
Main Window
09 59 26 (2
09'59 53 (2
09 5958 (2
100004 (2
100011 (2
. 10003512
0 The box of alarm events will show at least 10 latest alarm events. Click [Pictures] to
see the captured images of the moments at which the latest 10 events happened.
0 The pull—down menu [Setting] provides the way to reset the parameters, while the
[Web] is used to switch on and 06" the web site,
0 There are three icons in the bottom bar to indicate the current status about recording,
e-mail, and web-site. The message of [Fail to send mail] denotes that there is some
problem to send e-mails, and the user should check the e-mail setting parameters.
0 Tomb-figure is meaning that how many e-mail send out sucessful successfully , Fail
is meaning e-mail send out unsuccessfully.
0 There are four balls with number l~4. The appearance of each ball in the main
window denotes the corresponding sensor being triggered and the happening time
will also be recorded in the alarm events box and the alarm record file.
0 Click [ Exit] escape main window.
16
Important Safety Instructions
humuuhlmmdmwwidom-uham‘iwmmdm
product In order tn mduco (M risk 01 p-noml injury ma may
Ion. rh- lollvntnu symbol. in and In mm inmmiom:
hams tor
Improper us- may
cause some harm
dam-g. and injury. w and dlngen
Items for
lmpmpsl use may
came serious
Aim-mu
Pay attention to some abnnrmal sums.
Ommwumldnqlmlmllyfldnrnmly
maytunnuiuumnm oreloctncwodr. mm on
@ m-mrMEnimmodan-tymmmm
mam from th- curl-L
Do not anempt ta dlsammblo or nudity the product.
® omumusuninm-rukoinmovmlcm
Tunlfmunltwimm.
0 N m. pm in «opp-a m1 film-gun. unplug m.
Ac Idlpt-r Irrwmilllsiy.
Bad: Information at Installation
Ominuwmyunm-uuetuwvwmmrghnu
tummy. which in unlbl- in ma hulking m,
& ow-mnum-ponsuorormyaunmuhwy
msmnywwm
Z______
mm Read the Safety Instruction carefull
before installation
5me Notice during Oporlllon
ommmwmmwwmmmm
umunmdhwwammgmmm.
.w-mnummwmnyitmnm4mmu
MInhMerth-uuolwlmml
. imam-m-mummwmu-m
mnmaumnmhwmmn
numannnunnnm
moan: Q mmmnmnmmmmmmnn
mummmumnmmuwu
Q rummmmmn-ammn-‘l
Surety Instruction cl'AC adapter
0 wmwmwmtuMaa-hq
@ mem.mmnnmurmmnwm
. mmmnnummmymmnmmmu
Mm
ummnuum-«nwumw
A c mmmmnmmmmryummm.
Uummmmmmmmmmm
on.mm,umemm=
. lnmmmwwm.mmmmm
Wmmrmflxm unwmumm
mumuwmmmmmmm
. DOMNMWACWINMMIWWDM
woman-4mm
Sahty Instmalcn of power source am! vonage
Q Dnnuul-mynm-b'ymd vow. anqm-
mmmmwhnuxmmmmmxofh
mun-memo;
mummhnuflmflwmeMWhAQu-m,m. ,
Alma-um. _
THIS DEVICE COMPLIES WITH PART IS OF THE FCC RULES, OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS:
(I)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED. INCLUDING
INTERFERENCE THAT MAY CAUSE IINDESIRED OPERATION.
Caution:
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
5121
WEIYANG ELECTRIC WIRE & CABLE C0., LTD.
No.13, Da Tung SL, Tu Chang Industrial District. Taipei Hsien, Taiwan
TEL: (586-2)2269-3323.2268-5265 FAX: (886-2)2269-3325
E-mailzwyfiweiyangtcomiw
han/wvmweiyangcomtw

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2002:08:30 14:40:56+08:00
Create Date                     : 2002:08:23 19:49:50+08:00
Creator                         : Acrobat 5.0 Scan Plug-in for Windows
Page Count                      : 17
Mod Date                        : 2002:08:30 14:40:56+08:00
Creation Date                   : 2002:08:23 19:49:50+08:00
Producer                        : Acrobat 5.0 Scan Plug-in for Windows
Metadata Date                   : 2002:08:30 14:40:56+08:00

EXIF Metadata provided by EXIF.tools