Well Shin Technology WS533A Cloud Smart Hub User Manual WS 533A ai

Well Shin Technology Co., Ltd. Cloud Smart Hub WS 533A ai

User manual

無線連接方式開啟 Wi-Fi 並且搜尋基地台Wi-Fi Connection點選連接基地台(無需輸入密碼)Press the hot spot (no password required)如使用網路線連接 請跳過此步驟If you connect to the internet by network cable, please ignore this step. Turn on Wi-Fi and search the hot spotPress to set up / 點選設定點選Wi-Fi設定如果欲使用有線網路連接可略過此步驟Wi-Fi Setting / 無線設定Press Wi-Fi ConfigPress the advanced ConfigPress the Wi-Fi hot spot of your home點選高級設定點選重啟 IP Camera 重啟約耗時 90 秒請耐心等候Press the Reboot the IPC and wait 90 seconds to re-start the IP Camera選擇家中Wi-Fi並輸入密碼6Press / 點選 Add camera / 添加攝影機1.有線連接設定需使用 RJ45 連接Wi-Fi 路由器2.無線連接設定需先在手機 / 平板搜尋無線 AP 的 SSID (WXXXXXXX) 並連接1.Wired connection setting, use RJ45 to connect IPCAM and Wi-Fi Router2.Wireless connection setting, please have the smart phone/pad to connect to IPCAM Wi-Fi AP, to search SSID (Wxxxxxxxx) and make connection.Enter the IP Camera ID# (18 digits) of the sticker輸入IP攝影機編號（18位數）WFLY000XXXXXXXXXXDefault password密碼 1234Default password密碼 1234Press QR-Code buttonto scan the QR code of the Sticker掃描產品貼紙 上的QR-CodePress Search button to search the nearby IP Camera搜索附近的網絡攝影機IPCAM and Smart Phone/Pad mustbe the same Wi-Fi network主機需與手機 / 平板在同一個網域If using wired connection, plesae ignore this stepEnter the Smart Hub that you want to controlPress the 6 categories to control devices, for detailed installation and instruction, please scan the QR code 詳細的設定及使用方式請掃描QR-Code下載使用說明書WXXXXXXXWi-FiPressPressPressPressPressPressPress掃描 QR Code 下載 Smartbears APPScan the QR Code to download Smartbears APP7Support IOS 7/8/9(iPad/iPhone/iPod)Support Android4.1.2 and above支援 Android 4.1.2 以上版本支援 IOS 7/8/9 (iPad/iPhone/iPod)FCC statementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution : Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:●Reorient or relocate the receiving antenna.●Increase the separation between the equipment and receiver.●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.●Consult the dealer or an experienced radio / TV technician for help.Notice for Taiwan低功率電波輻射性電機管理辦法第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。Taiwan ChinaWellShin Store+安裝支架在牆壁上並調整好角度1將變壓器插上插座並接上電源Connect to power transformerScrew the wall mount bracket onto the wall and adjust the angle 3啟動電源3分鐘後 LED 指示燈變成藍色3 minutes to activate after power onthen the LED indicator turns to blue5將主機連接到 Wi-Fi 路由器Connect IP CAM to Wi-Fi Router4Screw the wall mount bracketinto IP CAM將主機旋上支架請妥善安裝避免主機掉落發生危險Please make sure everything fixedfor avoiding the IP CAM drop downMounting holes安裝孔2Installation Instructions安裝說明智能中心Cloud Smart HubWi-Fi Router RJ45or或WS-533A

Navigation menu