Welldy Technology OZX3 Bluetooth Speaker User Manual OZ X3 A

Shenzhen Welldy Technology Co., Limited Bluetooth Speaker OZ X3 A

15_OZ-X3 UserMan

RF warning statement:60.0 mm90.0 mmUser ManualOnly charge with devices rated and marked with 5V to avoid damage to the speaker. Do not open up the speaker, it voids the warranty and may damage the product. Rechargeable baeries have a limited number of charge cycles. Baery life and number of charge cycles varies by use and sengs.Never place the speaker close to high temperature heat sources.To keep the warranty valid, never try to repair the product yourself.SAFETY INSTRUCTIONSRead all instruconsCHARGINGConnect the supplied charging cable to the charge input and to a USB port on your computer or a USB charger. The charging LED is lit red during charging. The LED turns off when fully charged.It is recommended to charge 10 minutes before power on if you 7 days unused, then you can connue to use while charging.THE SPEAKER’S BATTERYA built-in rechargeable baery powers the speaker.POWER ON/OFFPower on: Long press power on the speaker, then the Bluetooth indicator light is on and you can connect Bluetooth devices.Power off: Long press power on the speaker, and then Bluetooth indicator will turn off.CONNECT THE SPEAKEROn your device search for Bluetooth devices. Select the speaker from the list. The speaker will give an indicaon sound when the connecon is successful.Only one Bluetooth device can be connected at the same me.If you want to connect another device to the speaker, then first disconnect the current one.DISCONNECT THE SPEAKEROn your device, disconnect the Bluetooth connecon with the speaker.RECONNECT THE SPEAKERSome Bluetooth devices support automac reconnecon, with those devices the speaker will automacally reconnect.The speaker will not automacally reconnect on devices that does not support automac reconnecon.1. Connect your phone via Bluetooth, the speaker will play ringtones while a call coming.2. Short press the mulfuncon key to answer the call on the speaker, you can talk to each other through the microphone hole, aer call ended, it will connue to play music.3. Long press the mulfuncon key on the speaker to reject an incoming call.4. When you connect your phone, press twice in rapid mulfuncon key to call back the last call by telephone.HANDS-FREE FUNCTIONALITYDURING A CALLIncrease volume: Long press on the “+” buon.Decrease volume: Long press on the “- “ buon.AUDIO CABLE CONNECTIONPower the speaker on.Connect a 3.5 mm audio cable to the speaker and your device.The speaker is now connected to your device.THE MF BUTTON’S FUNCTIONALITYPlay / pause / answer incoming call / end call = short press on the MF-buon.CHANGE VOLUME AND SONGWhen listening to musicIncrease volume: Short press on the “+” buon.Decrease volume: Short press on the “- “ buon.Previous song: Long press on the “-” buon.Next song: Long press on the “+” buon.360.0 mmTECHNICAL PARAMTERSPACKAGE INCLUDING● 1pcs* X3 wireless speaker ● 1pcs* Product manual ● 1pcs* Micro USB cable● Model: OZ-X3● Speaker: Ø52mm 4Ω 5W*1● Charging me: 1.5 hours● Input: 5.0V 1.0A● Product Weight: 224g● Bluetooth: 4.2+EDR compliant● Built-in rechargeable baery: Li-on, 3.7V, 600mAh● Playing me: 5 hours● Product Size: 100*100*43mm● Range: Up to 10m IP67TWS CONNECTION1: Turn on both speakers2: Press and hold the Play/Pause-buon on one of the speakers for about 2 seconds unl you hear a “beep”sound.3: Release Play/Pause buon. It can take a few more seconds before speakers connect to each other.4: Go into the Bluetooth menu on your smartphone and pair the speakers with your phone by selecng the speaker model number . (it will only display 1 number which is both combined in to one)NOTEWhen speakers are previously paired with each other: If they do not automacally pair with each other when you turn them on, press and hold the Play/Pause buon on one of the speakers for about 2 seconds. It can take a few more seconds before the speakers connect to each other. If you are connected to both speakers without the TWS connecon between them, then you have to disconnect from one of the speakers.TWS DISCONNECTION1. Press and hold the Play/Pause-buon on one of the speakers for about 2 seconds unl you hear a “beep”soundFCC STATEMENT:This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operaon. NOTES BEFORE USEThis product is designed with full aenon for safety performance. To ensure safe operaon, please follow the following rules:1. Place the speakers in a stable posion avoid fall and cause damage or personal injury.2. Do not drop, disassemble, open, crush, bend, puncture, burn speaker.3. Do not close to any heat source (such as radiators, heang equipment, stoves, or other heat-generang equipment) where the use of speakers.4. Please send professional maintenance staff to repair for any reason damage.5. Before wiping with a dry cloth to clean the speakers, set the power switch to the off posion and unplug the power cord from the power outlet.6. Health consideraons, please adjust the sound to a suitable level.WARNING:NOTEChanges or modificaons not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the in strucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving an tenna. Increase the separaon between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.FAULT AND MAINTENANCEFirst fault: connecon failed.Soluon:(1) Please check whether the mulfuncon indicator light flashes blue. Please power on your speakers if the light isn’t on. Please charge the speaker if the light is sll not on.(2) Please turn off the other Bluetooth devices, if there are many Bluetooth devices surrounding. This may result in search difficules.(3) Restart wireless speaker on devices for Bluetooth search funcon.Second problem: The music player appears sound breaks.Soluon:(1) View the distance between the player and the speaker has not been exceeded offecve Bluetooth connecon distance 8-12meters.(2) Ensure there is not any obstacle between the play device and speakers.(3) Check the playback device or whether the speaker is in a low power state.EXPLANATION1. the symbol indicates: The product is only suitable for the safe non-tropical climates.2. Note: Please use the same type or equivalent type of baery to replace if the baery is scrapped. Otherwise maybe explosion occurs.3. The lithium baery may be exposed such as fire or excessive heat.Adjust the volume.Make sure that your Bluetooth device is within range.Ensure there is no obstacles in the way that can block/disturb the signal.Check via the device’s Bluetooth connecon if the speaker is connected with the device.There is no sound?Move the device closer to the speaker or try removingobstacles between them.There is poor sound quality?Disconnect other connected devices and then try again.You can force a disconnecon by moving out ofBluetooth range (10 m).Cannot connect the device with the speaker?Recharge your speaker.Reset your speaker.TROUBLESHOOTINGThe speaker does not turn on ?The speaker does not turn off or does not respond ?WATERRESISTANTTRATINGIP67OZ-X31. Leather Lanyard2. The mul-funcon buons:play/pause/answer call3. +: The mul-funcon buons: Long press to next song, short press to increase the volume.4. -: The mul-funcon buons: Long press to previous song, short press to decrease the volume.5. power buon: Long press to power on/off, short press to transfer the playing mode.6. USB charging holeI7. AUX IN cable connecon interface8. Microphone hole9. Charge / Bluetooth indicatorPARTSAND FUNCTIONSProduct Name: Bluetooth SpeakerModel No.: OZ-X3FCC ID: 2AL7B-OZX3Bluetooth SpeakerThe device has been evaluated to meet general RF exposurerequirement. The device can be used in portable exposure condition without restriction.

Navigation menu