Weslo Cadence C62 Wltl39323 Users Manual

Weslo-Wltl39323-Owners-Manual weslo-wltl39323-owners-manual

WESLO-Treadmill-Cadence_C62

WLTL39323 to the manual 860509b0-8145-4d91-a5cd-dbdd0a8ded91

: Weslo Weslo-Cadence-C62-Wltl39323-Users-Manual-360623 weslo-cadence-c62-wltl39323-users-manual-360623 weslo pdf

Open the PDF directly: View PDF .
Page Count: 30

USER'S MANUAL

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

Patent Pending

Serial

Number

Decal

Model No. WLTL39323

Serial No.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

QUESTIONS?

If you have questions, or if there

are missing or damaged parts,

we will guarantee complete sat-

isfaction through direct assis-

tance from our factory.

TO AVOID DELAYS, PLEASE

CALL DIRECT TO OUR TOLL-

FREE CUSTOMER HOT LINE.

The trained technicians on our

Customer Hot Line will provide

immediate assistance, free of

charge to you.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.–Fri., 6 a.m.–6 p.m. MST

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual.

WESLO is a registered trademark of ICON Health & Fitness, Inc.

2

3

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described.

3. Place the treadmill on a level surface, with at

least eight feet of clearance behind it and two

feet on each side. Do not place the treadmill

on any surface that blocks air openings. To

protect the floor or carpet from damage, place

a mat under the treadmill.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

6. Keep children under the age of 12 and pets

away from the treadmill at all times.

7. The treadmill should not be used by persons

weighing more than 250 pounds.

8. Never allow more than one person on the

treadmill at a time.

9. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women. Always wear athletic

shoes. Never use the treadmill with bare feet,

wearing only stockings, or in sandals.

10. When connecting the power cord (see page 9),

plug the power cord into a surge suppressor

(not included) and plug the surge suppressor

into a grounded circuit capable of carrying 15

or more amps. No other appliance should be on

the same circuit. Do not use an extension cord.

11. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 9. To purchase a surge suppressor, see

your local WESLO dealer or call 1-800-806-

3651 and order part number 146148.

12. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may change

speed or stop unexpectedly, which may result

in a fall and serious injury.

13. Keep the power cord and the surge suppres-

sor away from heated surfaces.

14. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See

BEFORE YOU BEGIN on page 5 if the tread-

mill is not working properly.)

15. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

16. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

17. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

18. Never leave the treadmill unattended while it

is running. Always remove the key, and un-

plug the power cord when the treadmill is not

in use.

19. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6, and HOW TO FOLD

AND MOVE THE TREADMILL on page 20.) You

must be able to safely lift 45 pounds (20 kg) in

order to raise, lower, or move the treadmill.

20. Do not change the incline of the treadmill by

placing objects under the treadmill.

21. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

22. When using iFIT.com CDs and videos, an

electronic “chirping” sound will alert you

when the speed of the treadmill is about to

change. Always listen for the “chirp” and be

prepared for speed changes. In some in-

stances, the speed may change before the

personal trainer describes the change.

23. When using iFIT.com CDs and videos, you

can manually override the speed setting at

any time by pressing the speed buttons.

However, when the next “chirp” is heard, the

speed will change to the next settings for the

CD or video program.

24. Always remove iFIT.com CDs and videos from

your CD player or VCR when you are not

using them.

25. Inspect and properly tighten all parts of the

treadmill regularly.

26. Never insert or drop any object into any

opening.

27. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the main-

tenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized service

representative only.

28. This treadmill is intended for in-home use

only. Do not use this treadmill in any commer-

cial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown have been placed on your treadmill. If a decal is missing, or if

it is not legible, please call our Customer Service Department, toll-free, to order

a free replacement decal (see the front cover of this manual). Apply the decal in

the location shown. Note: The decals are not all shown at actual size.

4

5

Thank you for selecting the new WESLO®CADENCE

C62 treadmill. The CADENCE C62 treadmill combines

advanced technology with innovative design to help

you get the most from your exercise program in the

convenience of your home. And when you’re not exer-

cising, the unique CADENCE C62 can be folded up, re-

quiring less than half the floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have questions after read-

ing this manual, please call our Customer Service

Department toll-free at 1-800-999-3756, Monday

through Friday, 6 a.m. until 6 p.m. Mountain Time (ex-

cluding holidays). To help us assist you, please note

the product model number and serial number before

calling. The model number of the treadmill is

WLTL39323. The serial number can be found on a

decal attached to the treadmill (see the front cover of

this manual for the location).

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Console

Latch Knob

Thumb Pulse Sensor

Book Holder

Key/Clip

Circuit Breaker

Walking Belt

Cushioned Walking Platform

Front Wheel

Foot Rail

Power Cord

Rear Roller

Adjustment Bolts

Water Bottle

Holder (Bottle

not included)

RIGHT SIDE

LEFT SIDE

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Assembly requires your own Phillips screw-

driver , adjustable wrench , wire cutters , and needlenose

pliers .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a

small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal

condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off

the lubricant with a soft cloth and a mild, non-abrasive cleaner.

To identify small parts during assembly, use the part identification drawings below.

1. Make sure that the power cord is not plugged in.

With the help of a second person, carefully tip the

treadmill onto its left side. Partially fold the Frame (12) so

that the treadmill will be more stable. Do not fully fold

the treadmill until it is completely assembled.

Attach two Base Pads (97) to the bottom of the Base (82)

with two 3/4” Tek Screws (101). Attach a Wheel (95) to

the outside of the Base with a Wheel Bolt (86) and a

Wheel Nut (15).

82

15

86

97

1101

95

101

97

12

6

3/4” Tek Screw

(101)–5

Wheel Bolt (86)–2

Wheel Nut (15)–2

Washer (29)–8

Silver Screw

(107)–1

3” Bolt (47)–4

1 1/2” Screw (79)–4

4” Bolt (89)–4

3/4” Screw (68)–2

2. Identify the Right Upright (10), which has a large rectan-

gular hole near the upper end (see drawing 2b). Have a

second person hold the Right Upright near the Wire

Harness (17). Insert the end of the Wire Harness into the

Right Upright and out of the rectangular hole near the

upper end as shown. If necessary, use needlenose pliers

to pull the Wire Harness out of the hole.

See drawing 2b. Locate the Left Upright (9). If the Latch

Housing (77) is not attached to the Left Upright, remove

the two Screws (76) from the Left Upright. Attach the

Latch Housing as shown with the two Screws. Firmly

tighten—but do not overtighten—the Screws.

2a 10

17

2b 17

76

77

910

Rectangular

Hole

Large

Hole

3. Make sure that the Right Upright (10) is turned so it

bends in the direction shown. Insert two 3” Bolts (47) with

Washers (29) through the Base (82) and hand tighten

the Bolts into the lower end of the Right Upright.

With the help of a second person, tip the treadmill onto

its other side and repeat steps 1 through 3. Note: There

is not a wire harness in the Left Upright (not shown). An

extra Base Pad may be included.

47

29

82

Bend

10

3

4. With the help of a second person, set the treadmill flat on

the floor so that the Right Upright (10) and the Left

Upright (not shown) are vertical.

Hold one of the Handrails (85) near the Right Upright

(10). Insert the end of the Wire Harness (17) into the bot-

tom of the Handrail and out of the indicated hole. Using the

Silver Screw (107), attach the end of the ground wire to

the small hole in the side of the Handrail.

10

85

17

107

4

Hole

Ground

Wire

5. Have a second person hold the Console Base (87) and

the Handrail (85) in the position shown. Touch the Right

Upright (10) to discharge any static. Insert the Wire

Harness (17) through the two Plastic Ties (108) on the

Console Base. Find the 3-wire connector on the end of

the Wire Harness. Insert the connector into the red

socket beneath the Console Base. The connector

should slide easily into the socket and “snap” into

place. If the connector does not slide easily and snap

into place, turn the connector and then insert it. If the

connectors are not inserted properly, the Console

may be damaged when the power is turned on.

Insert the 5-wire connector into the black socket beneath

the Console in the same way. Make sure that the connec-

tors and wires appear as shown in the inset drawing. Insert

the excess Wire Harness (17) down through the Handrail.

Securely tighten the Plastic Ties (108) to prevent the

Wire Harness (17) from slipping. Then, cut off the ends

of the Plastic Ties.

17

87

85

10

5

108

7

5-wire

17

3-wire

7. Hold the Connector Cover (110) on the Console Base

(87) in the position shown. Attach the Connector Cover

to the Console Base with two 3/4” Screws (68).

68

110

87

8. Remove the Lock Knob (105) from the Lock Pin (11).

Make sure that the Lock Pin Collar (14) and the Spring

(56) are on the Lock Pin as shown. Insert the Lock Pin

into the Storage Latch (77) and tighten the Lock Knob

onto the Lock Pin.

77

9

85

14

56

11

8

7

105

6. Attach the Handrail (85) to the Console Base (87) with

two 1 1/2” Screws (79) as shown. Attach the other

Handrail (not shown) to the other side of the Console

Base in the same way.

Insert the excess Wire Harness (17) down into the Right

Upright (10) as you set the right Handrail (85) on the Right

Upright. Hand tighten two 4” Bolts (89) with Washers (29)

through the Right Upright into the right Handrail. Be careful

not to pinch the Wire Harness. Do not tighten the Bolts

yet.

Attach the left Handrail to the Left Upright (not shown) in

the same way. Note: There is not a wire harness in the

Left Upright.

89

29

10

87

79

85

17

6

10.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may

be included. Keep the included allen wrench in a secure place; the allen wrench is used to adjust the walking

belt (see page 23). To protect the floor or carpet from damage, place a mat under the treadmill.

9. Lower the Uprights (9, 10) until the Handrails (not shown)

are touching the floor. Make sure that the treadmill

Frame (12) is centered between the Uprights. Refer to

step 3. Firmly tighten the four 3” Bolts (47). Refer to step

6. Firmly tighten the four 4” Bolts (89). Raise the Uprights

back to the vertical position.

Make sure the two Cup Holders (118) are pressed into

the round holes on top of the Console Base (87). 9

10 12

Top View

9

8

87

118

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBETM WALKING BELT

Your treadmill features a walking belt coated with

PERFORMANT LUBETM, a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other

substances to the walking belt or the walking plat-

form. Such substances will deteriorate the walking

belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like any other type of sophisticated

electronic equipment, can be seriously damaged by

sudden voltage changes in your home’s power.

Voltage surges, spikes, and noise interference can

result from weather conditions or from other appli-

ances being turned on or off. To decrease the pos-

sibility of your treadmill being damaged, always

use a surge suppressor with your treadmill (see

drawing 1 at the right). To purchase a surge sup-

pressor, see your local WESLO dealer or call 1-800-

806-3651 and order part number 146148.

Use only a single-outlet surge suppressor that is

UL 1449 listed as a transient voltage surge sup-

pressor (TVSS). The surge suppressor must have a

UL suppressed voltage rating of 400 volts or less

and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated

for 120 volts AC and 15 amps. There must be a

monitoring light on the surge suppressor to indi-

cate whether it is functioning properly. Failure to

use a properly functioning surge suppressor could

result in damage to the control system of the

treadmill. If the control system is damaged, the

walking belt may change speed or stop unexpect-

edly, which may result in a fall and serious injury.

This product must be grounded. If it should malfunc-

tion or break down, grounding provides a path of least

resistance for electric current to reduce the risk of elec-

tric shock. This product is equipped with a cord having

an equipment-grounding conductor and a grounding

plug. Plug the power cord into a surge suppressor,

and plug the surge suppressor into an appropriate

outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

Important: The treadmill is not compatible with

GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit,

and has a grounding plug that looks like the plug illus-

trated in drawing 1 below. A temporary adapter that

looks like the adapter illustrated in drawing 2 may be

used to connect the surge suppressor to a 2-pole

receptacle as shown in drawing 2 if a properly

grounded outlet is not available.

The temporary adapter should be used only until a

properly grounded outlet (drawing 1) can be installed

by a qualified electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet box

covers are not grounded. Contact a qualified elec-

trician to determine if the outlet box cover is

grounded before using an adapter.

DANGER: Improper connection

of the equipment-grounding conductor can

result in an increased risk of electric shock.

Check with a qualified electrician or service-

man if you are in doubt as to whether the

product is properly grounded. Do not modify

the plug provided with the product—if it will

not fit the outlet, have a proper outlet

installed by a qualified electrician.

1

2

Grounded Outlet Box

Grounded Outlet Box

Grounding Plug

Surge Suppressor

Surge Suppressor

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

Grounding Pin

9

10

FEATURES OF THE CONSOLE

The console offers a selection of features designed to

help you get the most from your exercise. When the

manual mode of the console is selected, the speed

and incline of the treadmill can be changed with a touch

of a button. As you exercise, the console will display

continuous exercise feedback. You can even measure

your heart rate using the built-in pulse sensor.

Four certified personal trainer speed programs are

also offered. Each program automatically controls the

speed of the treadmill as it guides you through an

effective workout.

The console also features iFIT.com interactive technol-

ogy. IFIT.com technology is like having a personal trainer

right in your home. Using the included audio cable, you

can connect the treadmill to your home stereo, portable

stereo, or computer and play special iFIT.com CD pro-

grams (iFIT.com CD’s are available separately).

IFIT.com CD programs automatically control the speed

of the treadmill as a personal trainer guides you through

every step of your workout. High-energy music provides

added motivation. Each CD features two programs de-

signed by certified personal trainers.

In addition, you can connect the treadmill to your VCR

and TV and play iFIT.com video programs (videocas-

settes are available separately). Video programs offer

the same benefits as iFIT.com CD programs, but add

the excitement of working out with a class and an

instructor—the hottest new trend at health clubs.

With the treadmill connected to your computer, you

can also go to our Web site at www.iFIT.com and ac-

cess programs directly from the internet. See

www.iFIT.com for details.

To purchase iFIT.com CD’s or videocassettes, call

toll-free 1-800-735-0768.

To use the manual mode of the console, follow the

steps beginning on page 11. To use a personal trainer

speed program, see page 12.To use an iFIT.com CD

or video program, see page 17. To use an iFIT.com

program directly from our Web site, see page 18.

CAUTION:Before operating the

console, read the following precautions.

• Do not stand on the walking belt when turn-

ing on the power.

• Always wear the clip (see the drawing

above) while operating the treadmill.

• Adjust the speed in small increments to

avoid sudden jumps in speed.

• To reduce the possibility of electric shock,

keep the console dry. Avoid spilling liquids

on the console and place only a sealed

water bottle in the water bottle holder.

Clip

CONSOLE DIAGRAM

Key

Note: If there is a thin sheet of

plastic on the console, remove it.

11

HOW TO TURN ON THE POWER

Plug in the power cord (see page 9).

Stand on the foot rails of the treadmill.

Find the clip attached to the key (see the drawing

on page 10), and slide the clip onto the waistband

of your clothes. Next, insert the key into the con-

sole. After a moment, the displays and various in-

dicators will light. Test the clip by carefully tak-

ing a few steps backward until the key is

pulled from the console. If the key is not

pulled from the console, adjust the position of

the clip.

HOW TO USE THE MANUAL MODE

Insert the key fully into the console.

See HOW TO TURN ON THE POWER above.

Select the manual mode.

When the key is in-

serted, the manual

mode will be selected

and the Manual Control

indicator will light. If a

program has been

selected, press the Mode button repeatedly to res-

elect the manual mode.

Press the Start button or the Speed

▲▲

button to

start the walking belt.

A moment after the but-

ton is pressed, the

walking belt will begin to

move. Hold the

handrails and begin

walking. As you exer-

cise, change the speed of the walking belt as de-

sired by pressing the Speed buttons.

Each time a button is pressed, the speed setting

will change by 0.1 mph; if a button is held down,

the speed setting will change in increments of 0.5

mph. Note: The console can display speed and

distance in either miles or kilometers (see

SPEED DISPLAY on page 12). For simplicity, all

instructions in this section refer to miles.

To stop the walking belt, press the Stop button.

The Time display will begin to flash. To restart the

walking belt, press the Start button or the Speed

▲▲

button.

Note: The first time you use the treadmill, periodi-

cally inspect the alignment of the walking belt, and

align it if necessary (see page 23).

Change the incline of the treadmill as desired.

To change the incline of the treadmill, press either

of the Incline buttons until the desired incline level

is reached.

Follow your progress with the LED track and

the displays.

The LED Track—When

the manual mode or the

iFIT.com mode is se-

lected, the LED display

will show a track repre-

senting 1/4 mile. As you

exercise, the indicators

around the track will light in sequence until you

have completed 1/4 mile. A new lap will then

begin.

Calories/Fat Calories/

Pulse display—This dis-

play shows the approxi-

mate numbers of calories

and fat calories you have

burned (see FAT BURN-

ING on page 24). The display will change from

one number to the other every few seconds. The

FAT indicator will light when the number of fat

calories is shown. The display will also show your

heart rate when you use the pulse sensor (see

step 6 on page 12).

5

4

3

2

1

3

2

1

12

Time display—When

the manual mode or the

iFIT.com mode is se-

lected, this display will

show the elapsed time.

When a personal trainer

program is selected, the display will show the time

remaining in the program.

Distance display—This

display shows the dis-

tance that you have

walked or run.

Speed display—This

display shows the speed

of the walking belt.

Note: The console can

display speed and dis-

tance in either miles or

kilometers. To see which

unit of measurement is

selected, hold down the

Stop button, insert the key into the console, and

continue to hold the Stop button for a few seconds.

An “E” for English miles or an “M” for metric kilo-

meters will appear in the display. Press the Speed

▲▲

button to change the unit of measurement.

When the desired unit of measurement is selected,

remove the key and then reinsert it.

To reset the displays, press the Stop button, re-

move the key, and then reinsert the key.

Measure your heart rate, if desired.

To measure

your heart rate,

stand on the

foot rails and

place your

thumb on the

pulse sensor.

Do not press

too hard, or

the circulation in your thumb will be restricted

and your pulse will not be detected. After a few

seconds, the PULSE indicator beside the Calories/

Fat Calories/Pulse display will light and then your

heart rate will be shown. Hold your thumb on the

pulse sensor for about 15 seconds for the most ac-

curate reading.

If the displayed heart rate appears to be too high

or too low, or if your heart rate is not displayed, lift

your thumb off the pulse sensor for a few seconds.

Then, place your thumb on the pulse sensor as de-

scribed above. Remember to stand still while mea-

suring your heart rate.

When you are finished exercising, remove the

key.

Step onto the foot rails and press the Stop button.

Adjust the incline of the treadmill to the lowest

setting. Next, remove the key from the console and

put it in a secure place.

HOW TO USE PERSONAL TRAINER PROGRAMS

Insert the key fully into the console.

See HOW TO TURN ON THE POWER on page

11.

Select a personal trainer program.

When the key is in-

serted, the manual

mode will be selected.

To select a personal

trainer program, press

the Mode button repeat-

edly until one of the four

personal trainer program indicators lights. When a

personal trainer program is selected, the Time dis-

play will show how long the program will last and

the Speed display will flash the maximum speed

setting for the program for a few seconds.

The profiles in the cen-

ter of the console show

how the speed of the

treadmill will change

during the programs.

The first four speed set-

tings for the selected

program will be shown in the LED display.

2

1

7

6

Pulse Sensor

13

Press the Start button or the Speed

▲▲

button to

start the program.

A moment after the button is pressed, the tread-

mill will automatically adjust to the first speed set-

ting for the program. Hold the handrails and begin

walking.

Each program is divided into several time periods

of different lengths. One speed setting is pro-

grammed for each period. (The same speed set-

ting may be programmed for consecutive periods.)

The speed setting for

the first period will be

shown in the flashing

Current Period column

of the LED display. The

speed settings for the

next four periods will

be shown in the four

columns to the right.

When only three seconds remain in the first period

of the program, the Speed display will flash, the

Current Period column and the column to the right

will flash, and a series of tones will sound. When

the first period is completed, all speed settings will

move one column to the left. The speed setting for

the second period will then be shown in the flash-

ing Current Period column and the treadmill will

automatically adjust to the speed setting for the

second period. (When the same speed setting is

programmed for consecutive periods, the Speed

display will not flash and the column to the right of

the Current Period column will not flash during the

last three seconds of the current period.)

Note: If all of the indicators in the Current Period

column are lit after the speed settings have moved

to the left, the speed settings will move downward

so that only the highest indicators in the columns

appear in the LED display. If some indicators in the

Current Period column are not lit after the speed

settings have moved to the left again, the speed

settings will move back up.

To change the incline of the treadmill during the

program, press the Incline buttons until the de-

sired incline level is reached.

The program will continue until the speed setting

for the last period is shown in the Current Period

column and no time remains in the Time display.

The walking belt will then slow to a stop.

Note: If the speed setting for the current period is

too high or too low, you can manually override the

setting by pressing the Speed buttons. Every few

times a button is pressed, an additional indicator

will light or darken in the Current Period column. (If

any of the columns to the right of the Current

Period column have the same number of lit indica-

tors as the Current Period column, an additional

indicator may light or darken in those columns as

well.) Important: When the current period of the

program ends, the treadmill will automatically

adjust to the speed setting for the next period.

To stop the program temporarily, press the Stop

button. The Time display will begin to flash. To

restart the program, press the Start button or the

Speed

▲▲

button. To end the program, press the

Stop button, remove the key, and then reinsert the

key.

Follow your progress with the displays.

See step 5 on page 11.

Measure your heart rate, if desired.

See step 6 on page 12.

When the program is completed, remove the

key from the console.

When the program has ended, adjust the incline

of the treadmill to the lowest setting. Next, re-

move the key from the console and put it in a safe

place.

6

5

4

3

Current Period

14

HOW TO CONNECT THE TREADMILL TO YOUR

CD PLAYER, VCR, OR COMPUTER

To use iFIT.com CD’s, the treadmill must be con-

nected to your portable CD player, portable stereo,

home stereo, or computer with CD player. See pages

14 and 15 for connecting instructions. To use iFIT.com

videocassettes, the treadmill must be connected to

your VCR. See page 16 for connecting instructions. To

use iFIT.com programs directly from our internet

site, the treadmill must be connected to your home

computer. See page 15 for connecting instructions.

HOW TO CONNECT YOUR PORTABLE CD PLAYER

Note: If your CD player has separate LINE OUT and

PHONES jacks, see instruction A below. If your CD

player has only one jack, see instruction B.

A. Plug one end of the audio cable into the jack be-

neath the console. Plug the other end of the cable

into the LINE OUT jack on your CD player. Plug

your headphones into the PHONES jack.

B. Plug one end of the audio cable into the jack be-

neath the console. Plug the other end of the cable

into a 3.5mm Y-adapter (available at electronics

stores). Plug the Y-adapter into the PHONES jack

on your CD player. Plug your headphones into the

other side of the Y-adapter.

HOW TO CONNECT YOUR PORTABLE STEREO

Note: If your stereo has an RCA-type AUDIO OUT

jack, see instruction A below. If your stereo has a

3.5mm LINE OUT jack, see instruction B. If your

stereo has only a PHONES jack, see instruction C.

A. Plug one end of the audio cable into the jack beneath

the console. Plug the other end of the cable into the

included adapter. Plug the adapter into an AUDIO

OUT jack on your stereo.

B. Plug one end of the audio cable into the jack be-

neath the console. Plug the other end of the cable

into the LINE OUT jack on your stereo.

C. Plug one end of the audio cable into the jack be-

neath the console. Plug the other end of the cable

into a 3.5mm Y-adapter (available at electronics

stores). Plug the Y-adapter into the PHONES jack

on your stereo. Plug your headphones into the other

side of the Y-adapter.

LINE OUT

PHONES LINE OUT

PHONES

Audio

Cable

Head-

phones

A

AUDIO OUT

RIGHT

LEFT

Audio

Cable

Adapter

A

LINE OUT

Audio

Cable

B

PHONES

Audio

Cable

C

PHONES

PHONES

Audio

Cable

3.5mm

Y-adapter

Headphones

B

3.5mm

Y-adapter

Headphones

15

HOW TO CONNECT YOUR HOME STEREO

Note: If your stereo has an unused LINE OUT jack,

see instruction A below. If the LINE OUT jack is

being used, see instruction B.

A. Plug one end of the audio cable into the jack be-

neath the console. Plug the other end of the cable

into the included adapter. Plug the adapter into the

LINE OUT jack on your stereo.

B. Plug one end of the audio cable into the jack be-

neath the console. Plug the other end of the cable

into the included adapter. Plug the adapter into an

RCA Y-adapter (available at electronics stores).

Next, remove the wire that is currently plugged into

the LINE OUT jack on your stereo and plug the wire

into the unused side of the Y-adapter. Plug the Y-

adapter into the LINE OUT jack on your stereo.

HOW TO CONNECT YOUR COMPUTER

Note: If your computer has a 3.5mm LINE OUT jack,

see instruction A. If your computer has only a

PHONES jack, see instruction B.

A. Plug one end of the audio cable into the jack be-

neath the console. Plug the other end of the cable

into the LINE OUT jack on your computer.

B. Plug one end of the audio cable into the jack be-

neath the console. Plug the other end of the cable

into a 3.5mm Y-adapter (available at electronics

stores). Plug the Y-adapter into the PHONES jack

on your computer. Plug your headphones or speak-

ers into the other side of the Y-adapter.

LINE OUT

CD

VCR

Amp

LINE OUT

Audio

Cable

Adapter

A

LINE OUT

Audio

Cable

A

CD

VCR

Amp

LINE OUT

Audio

Cable

RCA

Y-adapter

Wire removed from

LINE OUT jack

B

Adapter

PHONES

Audio

Cable

B

3.5mm

Y-adapter

Headphones/Speakers

16

HOW TO CONNECT YOUR VCR

Note: If your VCR has an unused AUDIO OUT jack,

see instruction A below. If the AUDIO OUT jack is

being used, see instruction B. If you have a TV

with a built-in VCR, see instruction B. If your VCR

is connected to your home stereo, see HOW TO

CONNECT YOUR HOME STEREO on page 15.

A. Plug one end of the audio cable into the jack be-

neath the console. Plug the other end of the cable

into the included adapter. Plug the adapter into the

AUDIO OUT jack on your VCR.

B. Plug one end of the audio cable into the jack be-

neath the console. Plug the other end of the cable

into the included adapter. Plug the adapter into an

RCA Y-adapter (available at electronics stores).

Next, remove the wire that is currently plugged into

the AUDIO OUT jack on your VCR and plug the

wire into the unused side of the Y-adapter. Plug the

Y-adapter into the AUDIO OUT jack on your VCR.

AUDIO OUT

RIGHT

LEFT

VIDEO AUDIO

ANT. IN

RF OUT

IN

OUT

CH

34

Audio

Cable

Adapter

A

VIDEO AUDIO

ANT. IN

RF OUT

IN

OUT

CH

34

Audio

Cable Adapter

B

Wire removed from

AUDIO OUT jack

RCA Y-adapter

17

HOW TO USE IFIT.COM CD AND VIDEO

PROGRAMS

To use iFIT.com CD’s or videocassettes, the treadmill

must be connected to your portable CD player, portable

stereo, home stereo, computer with CD player, or

VCR. See HOW TO CONNECT THE TREADMILL TO

YOUR CD PLAYER, VCR, OR COMPUTER on page

14. Note: IFIT.com CD and video programs will con-

trol only the speed of your treadmill.

To purchase iFIT.com CD’s or videocassettes, call

toll-free 1-800-735-0768.

Follow the steps below to use an iFIT.com CD or video

program.

Insert the key into the console.

See HOW TO TURN ON THE POWER on page 11.

Select the iFIT.com mode.

When the key is in-

serted, the manual

mode will be selected.

To use iFIT.com CD’s

or videocassettes,

press the Mode button

repeatedly until the iFIT.com indicator lights.

Insert the iFIT.com CD or videocassette.

If you are using an iFIT.com CD, insert the CD

into your CD player. If you are using an iFIT.com

videocassette, insert the videocassette into your

VCR.

Press the PLAY button on your CD player or

VCR.

A moment after the button is pressed, your per-

sonal trainer will begin guiding you through your

workout. Simply follow your personal trainer’s

instructions. Note: If the Time display is flashing,

press the Start button or the Speed

▲▲

button on

the console. The treadmill will not respond to a

CD or video program when the Time display is

flashing.

During the CD or video program, an electronic

“chirping” sound will alert you when the speed of

the treadmill is about to change. CAUTION:

Always listen for the “chirp” and be prepared

for speed changes. In some instances, the

speed may change before the personal trainer

describes the change.

If the speed setting is too high or too low, you can

manually override the setting at any time by

pressing the Speed buttons on the console.

However, when the next “chirp” is heard, the

speed will change to the next setting of the CD

or video program.

To stop the walking belt at any time, press the

Stop button on the console. The Time display will

begin to flash. To restart the program, press the

Start button or the Speed

▲▲

button. After a mo-

ment, the walking belt will begin to move. When

the next “chirp” is heard, the speed will

change to the next setting of the CD or video

program.

When the CD or video program is completed, the

walking belt will stop and the Time display will

begin to flash. Note: To use another CD or video

program, press the Stop button or remove the key

and go to step 1.

Note: If the speed of the treadmill does not

change when a “chirp” is heard:

• Make sure that the iFIT.com indicator is lit and

that the Time display is not flashing. If the

Time display is flashing, press the Start but-

ton or the Speed

▲▲

button on the console.

• Adjust the volume of your CD player or VCR.

If the volume is too high or too low, the con-

sole may not detect the program signals.

• Make sure that the audio cable is properly

connected, that it is fully plugged in, and that

it is not wrapped around a power cord.

Follow your progress with the LED track and

the displays.

See step 5 on page 11.

Measure your heart rate, if desired.

See step 6 on page 12.

When the program is completed, remove the

key.

See step 6 on page 13.

CAUTION: Always remove iFIT.com CD’s and

videocassettes from your CD player or VCR

when you are finished using them.

7

6

5

4

3

2

1

18

HOW TO USE PROGRAMS DIRECTLY FROM

OUR WEB SITE

Our Web site at www.iFIT.com allows you to access

programs directly from the internet. See www.iFIT.com

for details. Note: Programs will control only the

speed of your treadmill.

To use programs from our Web site, the treadmill must

be connected to your home computer. See HOW TO

CONNECT YOUR COMPUTER on page 15. In

addition, you must have an internet connection and

an internet service provider. A list of specific system re-

quirements will be found on our Web site.

Follow the steps below to use a program from our

Web site.

Insert the key into the console.

See HOW TO TURN ON THE POWER on page 11.

Select the iFIT.com mode.

When the key is in-

serted, the manual

mode will be selected.

To use a program from

our Web site, press the

Mode button repeatedly

until the iFIT.com indicator lights.

Go to your computer and start an internet

connection.

Start your web browser, if necessary, and go to

our Web site at www.iFIT.com.

Follow the desired links on our Web site to se-

lect a program.

Read and follow the on-line instructions for using a

program.

Follow the on-line instructions to start the

program.

When you start the program, an on-screen count-

down will begin.

Return to the treadmill and stand on the foot

rails. Find the clip attached to the key and slide

the clip onto the waistband of your clothes.

When the on-screen countdown ends, the program

will begin and the walking belt will begin to move.

Hold the handrails, step onto the walking belt, and

begin walking. During the program, an electronic

“chirping” sound will alert you when the speed of

the treadmill is about to change. CAUTION:

Always listen for the “chirp” and be prepared

for speed changes.

If the speed setting is too high or too low, you can

manually override the setting at any time by press-

ing the Speed buttons on the console. However,

when the next “chirp” is heard, the speed will

change to the next setting for the program.

To stop the walking belt at any time, press the

Stop button on the console. The Time display will

begin to flash. To restart the program, press the

Start button or the Speed

▲▲

button. After a mo-

ment, the walking belt will begin to move. When

the next “chirp” is heard, the speed will change

to the next setting for the program.

When the program is completed, the walking belt

will stop and the Time display will begin to flash.

Note: To use another program, press the Stop

button and go to step 5.

Note: If the speed of the treadmill does not

change when a “chirp” is heard, make sure that

the iFIT.com indicator is lit and that the Time

display is not flashing. In addition, make sure

that the audio cable is properly connected, that

it is fully plugged in, and that it is not wrapped

around a power cord.

Follow your progress with the LED track and

the displays.

See step 5 on page 11.

Measure your heart rate, if desired.

See step 6 on page 12.

When the program is completed, remove the

key.

See step 6 on page 13.

9

8

7

6

5

4

3

2

1

10

19

THE INFORMATION MODE

The console features an information mode that keeps

track of the total number of hours that the treadmill has

been operated and the total number of miles that the

walking belt has moved. The information mode also al-

lows you to switch the console from miles per hour to

kilometers per hour.

To select the information mode, hold down the Stop

button, insert the key into the console, and continue to

hold the Stop button for a few seconds. When the infor-

mation mode is selected, the following information will

be shown:

The Time display will show the

total number of hours the

treadmill has been used.

The Distance/Laps display will

show the total number of miles

(or kilometers) that the walking

belt has moved.

An “E” for english miles or an

“M” for metric kilometers will

appear in the Speed display.

Press the Speed

▲▲

button to

change the unit of measure-

ment.

To exit the information mode, remove the key from the

console.

20

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the

lowest position. If this is not done, the treadmill may be

permanently damaged. Next, unplug the power cord.

CAUTION: You must be able to safely lift 45 pounds (20

kg) in order to raise, lower, or move the treadmill.

1. Hold the treadmill with your hands in the locations shown

at the right. CAUTION: To decrease the possibility of

injury, bend your legs and keep your back straight. As

you raise the treadmill, make sure to lift with your legs

rather than your back. Raise the treadmill about halfway

to the vertical position.

2. Move your right hand to the position shown and hold the

treadmill firmly. Using your left hand, pull the latch knob

to the left and hold it. Raise the treadmill until the catch is

past the pin on the latch knob. Slowly release the latch

knob. Make sure that the catch is securely held by the

pin.

To protect the floor or carpet from damage, place a

mat under the treadmill. Keep the treadmill out of

direct sunlight. Do not leave the treadmill in the stor-

age position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor-

age position as described above. Make sure that the catch

is securely held by the pin on the latch knob.

1. Hold the handrails as shown and place one foot against a

wheel.

2. Tilt the treadmill back until it rolls freely on the wheels.

Carefully move the treadmill to the desired location.

Never move the treadmill without tipping it back. To

reduce the risk of injury, use extreme caution while

moving the treadmill. Do not attempt to move the

treadmill over an uneven surface.

3. Place one foot on a wheel, and carefully lower the tread-

mill until it is resting in the storage position.

Base

Wheels

1

Latch

Knob

Pin

Catch

Closed

2

Open

21

HOW TO LOWER THE TREADMILL FOR USE

1. Hold the upper end of the treadmill with your right hand

as shown. Using your left hand, pull the latch knob to the

left and hold it. Pivot the treadmill down until the frame is

past the pin. Slowly release the latch knob.

2. Hold the treadmill firmly with both hands, and lower the

treadmill to the floor. Do not drop the treadmill frame

to the floor. CAUTION: To decrease the possibility of

injury, bend your legs and keep your back straight.

2

Latch

Knob

Pin

Catch

Open

1

22

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and

follow the steps listed. If further assistance is needed, please call our Customer Service Department toll-

free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor

is plugged into a properly grounded outlet (see page 9). Use only a single-outlet surge suppressor

that meets all of the specifications described on page 9. Important: The treadmill is not compatible

with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.

c. Check the circuit breaker located on the treadmill

near the power cord. If the switch protrudes as

shown, the circuit breaker has tripped. To reset the

circuit breaker, wait for five minutes and then press

the switch back in.

PROBLEM: The power turns off during use

SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see c. above). If the

circuit breaker has tripped, wait for five minutes and then press the switch back in.

b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for

five minutes, and then plug it back in.

c. Remove the key from the console. Reinsert the key fully into the console.

d. If the treadmill still will not run, please call our toll-free Customer Service Department.

PROBLEM: The speed display on the console does not function properly

SOLUTION: a. Remove the key and UNPLUG THE POWER CORD.

Remove the hood from the treadmill. Locate the Reed

Switch (21) and the Magnet (43) on the left side of the

Pulley (42). Turn the Pulley until the Magnet is aligned

with the Reed Switch. Make sure that the gap be-

tween the Magnet and the Reed Switch is about

1/8”. If necessary, loosen the 3/4” Screw (76) and

move the Reed Switch slightly. Retighten the Screw.

Re-attach the hood, and run the treadmill for a few

minutes to check for a correct speed reading.

Tripped

c

Reset

43

21

76

1/8” 42

Top

View

23

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 9.

b. If the walking belt is overtightened, treadmill perfor-

mance may decrease and the walking belt may be-

come damaged. Remove the key and UNPLUG THE

POWER CORD. Using the allen wrench, turn both

rear roller adjustment bolts counterclockwise, 1/4 of a

turn. When the walking belt is properly tightened, you

should be able to lift each side of the walking belt 3 to

4 inches off the walking platform. Be careful to keep

the walking belt centered. Plug in the power cord, in-

sert the key and run the treadmill for a few minutes.

Repeat until the walking belt is properly tightened.

c. If the walking belt still slows when walked on, please

call our toll-free Customer Service Department.

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION: a. If the walking belt is off-center, first remove the key

and UNPLUG THE POWER CORD. If the walking

belt has shifted to the left, use the allen wrench to

turn the left rear roller bolt clockwise 1/2 of a turn; if

the walking belt has shifted to the right, turn the

bolt counterclockwise 1/2 of a turn. Be careful not to

overtighten the walking belt. Plug in the power cord,

insert the key and run the treadmill for a few minutes.

Repeat until the walking belt is centered.

b. If the walking belt slips when walked on, first remove

the key and UNPLUG THE POWER CORD. Using

the allen wrench, turn both rear roller bolts clockwise,

1/4 of a turn. When the walking belt is correctly tight-

ened, you should be able to lift each side of the walk-

ing belt 3 to 4 inches off the walking platform. Be

careful to keep the walking belt centered. Plug in the

power cord, insert the key and carefully walk on the

treadmill for a few minutes. Repeat until the walking

belt is properly tightened.

Rear Roller Adjustment Bolts

3”–4”

b

b

a

24

CONDITIONING GUIDELINES

The following guidelines will help you to plan your ex-

ercise program. For more detailed exercise informa-

tion, obtain a reputable book or consult your physician.

EXERCISE INTENSITY

Whether your goal is to burn fat or to strengthen your

cardiovascular system, the key to achieving the

desired results is to exercise with the proper intensity.

The proper intensity level can be found by using your

heart rate as a guide. The chart below shows recom-

mended heart rates for fat burning and aerobic exercise.

To find the proper heart rate for you, first find your age

near the bottom of the chart (ages are rounded off to

the nearest ten years). Next, find the three numbers

above your age. The three numbers define your “train-

ing zone.” The lower two numbers are recommended

heart rates for fat burning; the higher number is the

recommended heart rate for aerobic exercise.

To measure your heart rate during exercise, use the

pulse sensor.

Fat Burning

To burn fat effectively, you must exercise at a relatively

low intensity level for a sustained period of time.

During the first few minutes of exercise, your body

uses easily accessible carbohydrate calories for en-

ergy. Only after the first few minutes does your body

begin to use stored fat calories for energy. If your goal

is to burn fat, adjust the speed and incline of the tread-

mill until your heart rate is near the lowest number in

your training zone.

For maximum fat burning, adjust the speed and incline

of the treadmill until your heart rate is near the middle

number in your training zone.

Aerobic Exercise

If your goal is to strengthen your cardiovascular sys-

tem, your exercise must be “aerobic.” Aerobic exercise

is activity that requires large amounts of oxygen for

prolonged periods of time. This increases the demand

on the heart to pump blood to the muscles, and on the

lungs to oxygenate the blood. For aerobic exercise,

adjust the speed and incline of the treadmill until your

heart rate is near the highest number in your training

zone.

WORKOUT GUIDELINES

Each workout should include the following three parts:

A Warm-up—Start each workout with 5 to 10 minutes

of stretching and light exercise. A proper warm-up in-

creases your body temperature, heart rate and circula-

tion in preparation for exercise.

Training Zone Exercise—After warming up, increase

the intensity of your exercise until your pulse is in your

training zone for 20 to 60 minutes. (During the first few

weeks of your exercise program, do not keep your

pulse in your training zone for longer than 20 minutes.)

Breathe regularly and deeply as you exercise—never

hold your breath.

A Cool-down—Finish each workout with 5 to 10 min-

utes of stretching to cool down. This will increase the

flexibility of your muscles and will help prevent post-ex-

ercise problems.

EXERCISE FREQUENCY

To maintain or improve your condition, complete three

workouts each week, with at least one day of rest be-

tween workouts. After a few months, you may com-

plete up to five workouts each week if desired. The key

to success is to make exercise a regular and enjoyable

part of your everyday life.

WARNING: Before beginning this

or any exercise program, consult your physi-

cian. This is especially important for individu-

als over the age of 35 or individuals with pre-

existing health problems.

The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

25

SUGGESTED STRETCHES

The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce.

1. Toe Touch Stretch

Stand with your knees bent slightly and slowly bend forward from

your hips. Allow your back and shoulders to relax as you reach

down toward your toes as far as possible. Hold for 15 counts,

then relax. Repeat 3 times. Stretches: Hamstrings, back of knees

and back.

2. Hamstring Stretch

Sit with one leg extended. Bring the sole of the opposite foot to-

ward you and rest it against the inner thigh of your extended leg.

Reach toward your toes as far as possible. Hold for 15 counts,

then relax. Repeat 3 times for each leg. Stretches: Hamstrings,

lower back and groin.

3. Calf/Achilles Stretch

With one leg in front of the other, reach forward and place your

hands against a wall. Keep your back leg straight and your back

foot flat on the floor. Bend your front leg, lean forward and move

your hips toward the wall. Hold for 15 counts, then relax. Repeat

3 times for each leg. To cause further stretching of the achilles

tendons, bend your back leg as well. Stretches: Calves, achilles

tendons and ankles.

4. Quadriceps Stretch

With one hand against a wall for balance, reach back and grasp

one foot with your other hand. Bring your heel as close to your

buttocks as possible. Hold for 15 counts, then relax. Repeat 3

times for each leg. Stretches: Quadriceps and hip muscles.

5. Inner Thigh Stretch

Sit with the soles of your feet together and your knees outward.

Pull your feet toward your groin area as far as possible. Hold for

15 counts, then relax. Repeat 3 times. Stretches: Quadriceps

and hip muscles.

1

2

3

4

5

26

NOTES

27

PART LIST—Model No. WLTL39323 R0503A

1 1 Motor Belt

2 1 Pulley/Flywheel/Fan

3 4 Motor Nut

4* 1 Motor/Pulley/

Flywheel/ Fan

5 1 Incline Motor Bolt

6 2 Incline Motor Spacer

7 1 Incline Motor

8 1 Stop Bracket

9 1 Left Upright

10 1 Right Upright

11 1 Lock Pin

12 1 Frame

13 1 Pin Clip

14 1 Lock Pin Collar

15 6 Wheel Nut/

Incline Motor Nut

16 4 Belt Guide Screw

17 1 Wire Harness

18 2 Hood Bracket

19 1 Front Hood Bracket

20 2 Warning Decal

21 1 Reed Switch

22 1 Reed Switch Clip

23 1 Left Handrail

24 1 Controller

25 1 Electronics Bracket

26 1 Circuit Breaker

27 1 Power Cord

28 1 Power Cord Grommet

29 10 Washer

30* 1 Latch Assembly

31 1 Incline Frame

32 2 Frame Pivot Bolt

33 2 Frame Pivot Spacer

34 1 Tension Bushing

35 1 Front Roller Adj. Bolt

36 1 Foot Rail Cap (Right)

37 1 Motor Tension Nut

38 4 Motor Bolt

39 4 Cap Screw

40 1 Foot Rail Cap (Left)

41 1 Left Foot Rail

42 1 Front Roller/Pulley

43 1 Magnet

44 4 Platform Screw

45 2 Isolator

46 4 Isolator Fastener

47 4 3” Bolts

48 1 Shield

49 2 Belt Guide

50 1 Battery Cover

51 1 Front Belly Pan

52 8 U-Nut

53 3 Cable Tie Clamp

54 4 Cable Tie

55 1 Walking Belt

56 1 Spring

57 1 Rear Roller

58 4 Hood Screw

59 2 Rear Foot

60 1 iFIT Jack

61 1 Ground Wire

62 20 Screw

63 1 Left Rear Endcap

64 1 Right Rear Endcap

65 2 Rear Roller Adj. Bolt

66 1 Motor

67 1 Latch Decal

68 6 Console Screw

69 2 Latch Catch Screw

70 1 Latch Catch

71 1 Walking Platform

72 5 8” Cable Tie

73 1 Incline Bolt

74 1 Motor Tension Bolt

75 2 Right Foot Rail

76 6 3/4” Screw

77 1 Storage Latch Bracket

78 1 Console

79 4 1 1/2” Screw

80 2 Incline Pivot Nut

81 4 Motor Star Washer

82 1 Base

83 2 Incline Frame Bolt

84 2 Motor Tension

Washer

85 1 Right Handrail

86 2 Wheel Bolt

87 1 Console Base

88 1 Console Crossbar

89 4 4” Bolt

90 1 Key/Clip

91 1 Incline Motor Belly Pan

92 2 Roller Adj. Washer

93 1 Book Holder

94 1 Motor Hood

95 2 Front Wheel

96 1 Incline Motor Shield

97 4 Base Pad

98 1 iFIT Wire

99 1 Upright Grommet

100 1 Allen Wrench

101 5 3/4” Tek Screw

102 2 Handrail Endcap

103 1 Power Board Plate

104 4 Base Cap

105 1 Lock Knob

106 1 Choke

107 1 Silver Screw

108 2 Plastic Tie

109 1 Large Washer

110 1 Connector Cover

111 1 Hood Spacer

112 2 Bumper

113 1 Edge Guard

114 2 Upright Endcap

115 2 Metal Plate

116 2 Belly Pan Interface

117 2 Rear Foot Spacer

118 2 Cup Holder

119 1 Power Board

120 1 Controller Wire

# 1 8” Blue Wire, 2F

# 1 4” Blue Wire, 2F

# 1 8” White Wire, 2F

# 1 8” White Wire, Pigtail

# 1 4” White Wire, M/F

# 1 8” Green Wire, 2 Ring

# 1 User's Manual

* Includes all parts shown in the

box

# These parts are not illustrated

Key

No. Qty. Description Key

No. Qty. Description Key

No. Qty. Description

To identify the parts listed below, see the EXPLODED DRAWING in the center of this manual.

106

62

41

18

62

15

8

57

6

19

16

73 15

35

32

33

80

31

38

39

80

76 18

62

22

21

3

1

3

4*

2

39

40

36

33

43

42

32

45

71

55

76

45

62

53

54

59

101

62

61

64

57

67

76

51

15

66

44 76

12

49

75

37

74

81

25

27

28

62 26

34 84

76

76

16

49

16

59

101

65 92

65 92

69

70

44

44

44

81

38

24

62

100

46

63

46

116

116

117

117

62

103

101

116

119

111

EXPLODED DRAWING—Model No. WLTL39323 R0503A

90

79

79

30*

114

114

83

83

101

91

72

82

104

97

101

17

99

101

17

86

95

15

15

95

86

97

101

97

101

104

104

104

97

101

77

76

105

56

11

13

14

79

85

102

79

85

102

89

89

47

29

47

29

58 58

58

94

58

87

68 88

101

96

78

68

68

68

68

93 50

9

10

20

20

52

52

29

29

110

118

118

68

113

115

115

98

120

60

101

112

112

109

108

107

101

52

52

EXPLODED DRAWING—Model No. WLTL39323 R0503A

Part No. 198365 R0503A Printed in USA © 2003 ICON Health & Fitness, Inc.

ORDERING REPLACEMENT PARTS

To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through

Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared to give

the following information:

• The MODEL NUMBER OF THE PRODUCT (WLTL39323)

• The NAME OF THE PRODUCT (WESLO®CADENCE C62 treadmill)

• The SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual)

• The KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the EXPLODED DRAWING in the center of

this manual and the PART LIST on page 27)

LIMITED WARRANTY

ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and

material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-

chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-

ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.

All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not

extend to any product or damage to a product caused by or attributable to freight damage, abuse, mis-

use, improper or abnormal usage or repairs not provided by an ICON authorized service center; prod-

ucts used for commercial or rental purposes; or products used as store display models. No other war-

ranty beyond that specifically set forth above is authorized by ICON.

ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-

nection with the use or performance of the product or damages with respect to any economic loss, loss

of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other

consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of in-

cidental or consequential damages. Accordingly, the above limitation may not apply to you.

The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of

merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set

forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the

above limitation may not apply to you.

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813