West Elm Bond Large Desk Bondlargedesk 9.4.8

: West-Elm Bond-Large-Desk bond-large-desk west-elm pdf

Open the PDF directly: View PDF .
Page Count: 4

bond large desk

assembly instructions

Page 1 of 47088024 - 09-04-08

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect fi nish.

! Proper assembly of this item requires 2 people.

AB

cam bolt 4x cam lock 4x

Hardware

C

wood dowel 8x

EF

spring washer 12x fl at washer 12x

D

long bolt 12x

GH

short “L” bracket 2x long “L” bracket 2x

I

short bolt 12x

bond large desk

assembly instructions

Page 2 of 47088024 - 09-04-08

1. Flip the desk top over onto a clean smooth surface. Pull the drawers out until they stop.

bond large desk

assembly instructions

Page 3 of 47088024 - 09-04-08

2. Insert cam bolts (A) and wood dowels (C) into leg assemblies as shown. Insert cam locks into rails as

shown in the drawing, making sure to line up the indicator mark points toward the end of the rail.

Next align the leg assemblies to the side of the side of the desk and attach using long bolt (D),

spring washer (E), and  at washer (F). Tighten with allen key.

NOTE: The top rail has 2 more holes

than the bottom rail.

A

B

C

D

E

F

C

bond large desk

assembly instructions

Page 4 of 47088024 - 09-04-08

3. Place the short “L” brackets and long “L” brackets into the locatioins shown in the drawing. Insert short

bolt (I) into each hole and tighten with supplied allen key. be sure not to overtighten. With the help

of another person  ip the desk upright. Asjustable levelers are installed in the legs to accomodate

uneven  ooring. To adjust these levelers simply turn then couterclockwise to raise the leg.

G

H

I

I

CARE INSTRUCTIONS

Hardware may loosen overtime. Periodically check that all connections are tight.

Wipe with a soft, dry cloth. To protect  nish, avoid the use of chemicals and household cleaners.