West Elm Overlapping Squares Barstool
2014-07-06
: West-Elm Overlapping-Squares-Barstool overlapping-squares-barstool west-elm pdf
Open the PDF directly: View PDF .
Page Count: 5
![](asset-1.png)
overlapping squares barstool
assembly instructions
Page of 594554 - 08/07
! Tools required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect nish.
! Proper assembly of this item requires 2 people.
A B
C D
large at washer 8x
large lock washer 8x
large allen key x
long bolt 4x medium bolt 4x
short bolt 8x
small lock washer 8x
small at washer 8x
small allen key x
FE
GH
I
![](asset-2.png)
overlapping squares barstool
assembly instructions
Page 2 of 594554 - 08/07
(1) (2) (3) (4)
chair back seat frame left front leg right front leg
(5) (6) (7)
front stretcher left side stretcher right side stretcher
![](asset-3.png)
overlapping squares barstool
assembly instructions
Page of 594554 - 08/07
G
H
AD
E
F
C
I
. Fasten seat frame (2) to chair back () using short bolts (C), small lock washers (F), and small at washers (G) as shown.
Tighten bolts using small allen key (I).
2. Fasten seat frame corner blocks to chair back () using long bolts (A), large lock washers (D), and large at washers (E) as
shown. Tighten bolts using large allen key (H).
2
1
![](asset-4.png)
overlapping squares barstool
assembly instructions
Page 4 of 594554 - 08/07
. Fasten left (6) and right (7) side stretchers to back legs using short bolts (C), small lock washers (F), and small at washers (G)
as shown. Tighten bolts using small allen key (I).
G
F
C
I
6
7
4. Fasten front stretcher (5) to left () and right (4) front legs using short bolts (C), small lock washers (F), and small at washers
(G) as shown. Tighten bolts using small allen key (I).
G
F
C
I
3
5
4
NOTE: When assembling the overlapping squares barstool, do not fully tighten bolts on side stretchers until front legs have
been attached to seat. Once front legs are attached to stretcher and seat bottom, tighten both bolts on each side stretcher.
![](asset-5.png)
overlapping squares barstool
assembly instructions
Page 5 of 594554 - 08/07
5. Fasten side stretchers to front legs using short bolts (C), small lock washers (F), and small at washers (G) as shown. Tighten
bolts using small allen key (I).
6. Fasten front legs to seat using medium bolts (B), large lock washers (D), and large at washers (E) as shown. Tighten bolts us-
ing large allen key (H).
CARE INSTRUCTION
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.
G
F
C
I
H
B
D
E
4
3