Whalen Whalen Furniture BL03 Bluetooth Speaker User Manual BL 03
Whalen LLC dba Whalen Furniture Manufacturing Bluetooth Speaker BL 03
User manual
Pairing a Bluetooth Device
First turn on the power supply.
Search for Bluetooth Music Speakers using a compatible Bluetooth
device, then select “Fireplace Speaker” to pair them. The connected
device can now be used to
switch tracks and to control the
volume of the Bluetooth
Music Speakers.
Specifications:
Bluetooth 2.1 + EDR Connectiviy
Wireless Range: 10 M
Speaker Output: 10 W + 10 W (RMS)
Rated Impedance: 8 Ω
Left horn: 2” 5 W/8 Ω *2
Right horn: 2” 5 W/8 Ω *2
Frequency response: 25 Hz - 20 KHz
S/N Ratio: ≥78 DB
Separation: ≥45 DB
Input: 100-260 VAC 50-60 Hz (Output DC: 12 V 2A)
Sound Bar size: W 65 * D 43 * H 430 mm
Instruction Manual
MODEL: BL-03
---
FCC/ICES Statement
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
i
n a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not in-stalled and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with the FCC RF radiation exposure limits set
forth for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20 centimeters between the
radiator and your body.
This device complies with Industry Canada Licence-exempt RSSs. Operation
is subject to the following two conditions: (1) this device may not cause
harmful interference,
and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Modifications not approved by the party responsible for compliance
could void user’s authority to operate the equipment.
CAN ICES-3 (B)/NMB-3(B)
This Class B digital apparatus complies with Canadian ICES-003.