Whirlpool LER5848EQ2 User Manual ELECTRIC DRYER Manuals And Guides L0803357
WHIRLPOOL Residential Dryer Manual L0803357 WHIRLPOOL Residential Dryer Owner's Manual, WHIRLPOOL Residential Dryer installation guides
User Manual: Whirlpool LER5848EQ2 LER5848EQ2 WHIRLPOOL ELECTRIC DRYER - Manuals and Guides View the owners manual for your WHIRLPOOL ELECTRIC DRYER #LER5848EQ2. Home:Laundry & Garment Care Parts:Whirlpool Parts:Whirlpool ELECTRIC DRYER Manual
Open the PDF directly: View PDF 
.
Page Count: 24
| Download | |
| Open PDF In Browser | View PDF |
Use And Care
A Note to You ........................ 2
Dryer Safety ....................... 3-4
Parts and Features ............... 5
Operating Your Dryer ........... 6
Before starting your dryer ... 6
Starting your dryer .............. 6
Stoppinglrestarting
your dryer ............................
6
Selecting the right cycle
and setting ..........................
7
FINISH GUARD _ feature .... 8
Selectable end of cycle
signal ................................
10
Using the drying rack ........ 11
Caring for Your Dryer ......... 12
Laundry Tips ........................
Troubleshooting
17
.................. 21
Requesting Assistance
or Service .............................
23
Warranty
24
..............................
1-800-253-1301
Call our Consumer Assistance Center
with questions or comments,
EASY-TO-USE
PART NO, 3401096
ELECTRIC AND GAS DRYERS
(E-Line)
A Note to You
Thank
you
for
buying
® appliance.
a WHIRLPOOL
Because your life is getting busier and more complicated, WHIRLPOOL dryers are easy
to use, save time, and help you manage your home better. To ensure that you enjoy years
of trouble-free operation, we developed this Use and Care Guide. It contains valuable
information about how to operate and maintain your dryer properly and safely. Please read
it carefully. Also, please complete and mail in the Ownership Registration Card provided with
your appliance. The card helps us notity you about any new information on your appliance.
Please
record
your
model's
information.
Whenever you call to request service on
your appliance, you need to know your
complete model number and serial number.
You can find this information on the model
and serial number label in the door well (see
diagram on page 5 for location of label),
Please also record the purchase date of
your appliance and your dealer's name,
address, and telephone number.
Keep this book and the sales slip together
I
Model Number
Serial Number
Purchase Date
Dealer Name
Dealer Address
Dealer Phone
in a safe place for future
number
is toll-freeAssistance
24 hours Center
a day.
Our Consumer
reference.
1-800-253-1301
Dryer Safety
Your
safety
is important
to
us.
This guide contains safety statements under
warning symbols. Please pay special
attention to these symbols and follow any
instructions given. Here is a brief explanation of the use of the symbol.
IMPORTANT
SAFETY
INSTRUCTIONS
- Do not store or use gasoline or other flammable
in the vicinity of this or any other appliance.
- WHAT TO DO IF YOU SMELL
vapors
and liquids
GAS:
• Do not try to light any appliance.
• Do not touch any electrical
your building.
• Clear the room, building,
switch;
do not use any phone in
or area of all occupants.
• Immediately call your gas supplier from a neighbor's
Follow the gas supplier's instructions.
• If you cannot reach your gas supplier,
Installation and service must be performed
service agency, or the gas supplier.
phone.
call the fire department.
by a qualified
installer,
continued on next page
Important
Safety
• Read all instructions before using your
dryer.
• Dryer must be electrically grounded. See
the Installation Instructions.
• Do not machine wash or machine dry
items cleaned, washed, soaked in, or
spotted with wax, paint, gasoline, oil, dry
cleaning solvents, or other flammable
fluids. The fumes can create a fire hazard
or explosion. Always hand wash and line
dry items containing these materials.
• Do not wash or dry items that are soiled
with vegetable or cooking oil. These
items may contain some oil after laundering. Due to the remaining oil, the fabric
may smoke or catch fire by itself.
• Store flammable solvents or fluids away
from your dryer.
• Dry cleaning solvents or fluids should
never be put directly into your dryer.
• Do not let dust, lint, paper, rags, chemicals, etc., pile up around or under the
dryer.
Instructions
• Do not allow children to operate, play
with, or crawl inside your dryer. Supervise children when your dryer is used
near children.
• Do not reach into a dryer if the drum
is moving.
• Install and/or store dryer where it will not
be exposed to the weather.
• Do not tamper with the controls.
• Do not dry rubber, rubber-like, or heatsensitive materials with heat.
• Unplug the power supply cord or turn off
electrical power before attempting to
service your dryer. Also, shut off gas
valve if you have a gas dryer.
• When removing from service or discarding a dryer, always remove the door to
prevent accidental entrapment.
• Clean lint screen before or after each
load.
• Use only fabric softeners specifically
labeled as not being harmful to the dryer.
• Do not allow lint to build up inside the
dryer or exhaust system. Cleaning should
be done periodically by a qualified
person.
Understanding
your
responsibilities
• Be sure that your dryer:
-is located in an area where the
temperature is above 45°F (7°C).
-is properly installed in a well-ventilated
room and leveled on a floor that can
support the weight.*
-is connected to the proper outlet and
electrical supply.*
-is properly connected to fuel and
exhaust systems (gas dryers must be
vented outdoors).*
-is not installed against draperies or
curtains, or on carpet.*
-is properly maintained, repaired, and has
parts replaced by a qualified person.
4
- SAVE
THESE
-is used only for jobs normally expected of
home clothes dryers.
-is not used by anyone unable to operate
it properly.
• Never operate the dryer if:
- it is not working right (i.e. noisy, too hot).
- it is damaged.
-parts are missing.
- all panels are not in place.
- the lint screen is loose, damaged, or
missing.
* See the Installation Instructions for complete information.
INSTRUCTIONS
-
Parts and Features
The parts and features of your dryer are illustrated below. Become familiar with all parts and
features before using your dryer. Page references are included next to some features. Refer
to those pages for more information about the features.
Fabric/Temperature
sel_
{pp. 6-8)
FINISH GUARD =
selector
(p, 8)
Cycle signal selector/
Start button
(pp. 6, 10)
Cycle control
(pp. 6-8)
Consumer
As.,
ice
Lint screen
(p. 12)
(1-800-253-1301 )
Model and serial
number
(p. 2)
I
Wide-opening
hamper door
Dryer drum
(p. 13)
Other
Drying
features
rack (available
not shown:
as an option)
(p. 11)
Drum light (p. 13)
Control
Panel
Operating
Your Dryer
The information in this section helps you learn to use your dryer efficiently and safely. Refer
to "Laundry Tips" on page 17 for additional information on sorting, loading, and drying mosl
types of washables.
Before
starting
your
dryer
Before using your dryer, wipe the dryer drum
dust from storing and shipping.
with a damp cloth to remove
i
Starting
your
dryer
3, Turn the Cycle Control Knob to the cycle
1. Load clothes into the dryer and close
the door.
you chose on the Fabric/Temp
Selector.
that corresponds with the one
4. Push the Start Button.
2. Turn the Fabric/Temp Selector to the
I_
desired setting (see page 7.)
NOTE: Your dryer stops automatically when
a cycle ends.
i
Stopping/restarting
your
You can stop your dryer anytime during
a cycle.
To stop the dryer, either:
• Open the dryer door.
OR
to OFF.
• Turn the Cycle Control Knob
NOTE: The Cycle Control Knob should point
to an OFF area when the dryer is not in use.
6
dryer
To restart the dryer:
1. Close the door.
2. Select a new cycle and temperature (if
desired).
3. Push the Start Button.
Selecting
the right
cycle
and setting
The following pages describe the cycles on
your dryer. Refer to the charts on pages 9-10
for help in selecting drying cycles.
Drying
guidelines
• Always follow care label directions when
they are available.
• Use the Fluff Air cycle, or line dry rubber,
plastic, delicate, and heat-sensitive fabrics
(see page 10).
• The last few minutes of all cycles are without
heat to make the load easier to handle.
• To help reduce wrinkling, remove the load
from the dryer as soon as tumbling stops.
This is especially important for permanent
press, knits, and synthetic fabrics.
• Overdrying can cause shrinkage, static
cling, and damage to some fabrics.
• Refer to pages 17-20 for information
about:
- sorting clothes for drying
- choosing load sizes
- drying tips
- using dryer fabric softeners
- saving energy
- drying special-care items.
Fable / Temp
Your easy-to-use dryer has a color-coordinated Cycle Control Knob and Fabric!
Temperature Selector. When using the
automatic cycles, simply choose the setting
on the Cycle Control Knob that corresponds
with the one you chose on the Fabric/Temp
Selector. When using Timed Drying, choose
High, Medium, or Low heat with the Fabric/
Temp selector. (See chart on page 9.)
Automatic
Cycle(s)
Your dryer has five Automatic cycles (Heavy,
Normal, Wrinkle Resist, Quick Dry, and
Delicate) and three corresponding temperature selections. All of the Automatic cycles
use an Electronic Sensor Dry control that
senses the amount of moisture in the load.
Your Automatic cycle(s) shuts off when the
selected dryness is reached. The Cycle
Control Knob will not move until the load is
almost dry. After the cool-down and the
FINISH GUARD ® portion of the cycle (if
selected), the Knob automatically turns to an
OFF area and tumbling stops.
• If the load is drier than you like, select a
setting closer to LESS DRY the next time
you dry a similar load.
• If the load is not as dry as you like, complete drying using the Timed Drying cycle.
Select a setting closer to VERY DRY the
next time you dry a similar load.
Timed
Drying
TUMBLE
Cycle
Use the Timed Drying cycle (high, medium,
or low heat) to complete drying if some
items are damp after Automatic drying.
Timed Drying is also useful for:
• Delicate items and small loads that need
a short drying time.
• Bulky items and large loads that require a
long drying time.
Damp
Dry
Feature
Use the Damp Dry feature in the Timed
Drying cycle to dry items to damp level, or to
dry items that do not require an entire drying
cycle. Two examples are heavy cottons,
such as jeans, which you do not want to
become stiff, or cotton clothes which are
easier to press when damp.
FINISH
GUARD
PRESS ® Feature
The TUMBLE PRESS feature in the Timed
Drying cycle removes wrinkles from clothes
that have been packed in a suitcase or
closet, or from items not removed from the
dryer at the end of a cycle. As soon as the
dryer stops, fold or put the items on hangers.
Fluff
Air Cycle
The Fluff Air cycle has no heat. Use this
unheated cycle to fluff or air dry bedding,
plastic tablecloths, foam pillows, sneakers,
etc. See page 10 for more information about
the Fluff Air cycle.
® feature"
When you are unable to remove a load from
the dryer as soon as it stops, wrinkles can
form. The FINISH GUARD feature tumbles
the load without heat every few minutes up
to 45 minutes after the cycle ends. This
tumbling rearranges and fluffs the load to
avoid wrinkles.
The FINISH GUARD teature is available in
all of the Automatic cycles and the Timed
Drying cycle. Simply turn the FINISH
GUARD Selector to On or Off. If the Selector is On and you do not open the dryer door
within a few minutes after the cycle stops,
the FINISH GUARD feature takes over to
protect the load.
A signal sounds every few minutes when
FINISH GUARD is running. The signal and
cycle stop when you open the dryer door.
oa
c_
FinishGuard
Timed
Drying
For most loads, use an Automatic cycle
(see page 7). If you choose not to use an
Automatic cycle, then use the Timed Drying
chart below as a guideline. Remember to
always follow care label directions when
they are available.
Timed
Drying
Chart
TIMED DRYING
(minutes)
TYPE OF LOAD
High
CO'I-rONS AND LINENS
Extra Heavy
Bedspreads, mattress pads, quilts
Heavyweight
Towels, jeans, corduroys, work clothes
Medlumweight
Sheets, cotton underwear, diapers
Lightweight
Batistes, organdies, lingerie
PERMANENT PRESS,
SYNTHETICS, AND BLENDS
Heavyweight
Work clothes, jackets, raincoats
Mediumweight
Shirts, play clothes, sheets, slacks
Lightweight
Lingerie, blouses, dresses
KNITS
Heavyweight
Cottons, rayons, blends, T-shirts,
slacks, shirts
Mediumweight
Synthetics (polyester, acrylic, etc.),
dress slacks, skirts, sweaters
Lightweight
Synthetics (polyester, acrylic, etc.) and
blends, lingerie, blouses, dresses
DELICATES*
Sheer curta ns (2 or 3 panels),
gauze, lace, etc.
Medium
Low
7O
50-60
40-50
20-30
40-50
30-40
20-30
40-50
30-40
20-30
20
* Fluff Air cycle or line drying is also recommended for delicate fabrics. (See page 10.)
i
Fluff
Air
cycle
or line drying
The chart below includes examples of items
that require drying without heat. Use the
Fluff Air cycle, or place the items on a line or
rack to air dry.
NOTES:
• Heat-sensitive fabrics should not be dried
in the dryer.
• Line dry bonded or laminated fabrics.
Fire Hazard
Use Fluff Air cycle to dry items
listed below.
• Always follow care label directions when
they are available.
Do not use heat to dry these items,
Failure to do so can result in death
or fire.
TYPE OF LOAD
FLUFF AIR CYCLE*
(minutes)
,,,,
,,,,,,
DELICATE FABRICS
Sheer curtains (2 or 3 panels), gauze, lace, etc.
20-30
RUBBER, PLASTIC, HEAT-SENSITIVE FABRICS
20-30
Foam Rubber - Pillows, padded bras, stuffed toys
• Make sure coverings are securely stitched.
• Shake and fluff pillows by hand several times during the Fluff
Air cycle.
• Make sure pillows are completely dry. Foam rubber pillows
take a long time to dry.
Plastic - Shower curtains, tablecloths
Rubber-backed rugs
Olefin, Polypropylene,
20-30
20_30
10-20
Sheer nylon
20-30
COTTON AND CANVAS SHOES
• Place several bath towels in the dryer to act as a buffer, or
place shoes on a drying rack if your dryer has one.
• Remove shoes from dryer while still damp.
• Stretch shoes and allow to air dry.
* Reset cycle as needed to complete drying.
,,
selecta )le
iiiiiii iiiiiiiiiiiiiii
end of cycle
The dryer sounds a signal to let you know
when the cycle is finished. The signal is
helpful when you are drying permanent
press, synthetics, and other items that
should be removed from the dryer as soon
as it stops. The signal can be turned On
or Off.
10
iiiiii
ii
signal
oa
On
Finish Guard
Using the drying
(available
as an
rack
option)
To order the drying rack (Part #692990), write:
Whirlpool Corporation
Parts Distribution Center
123 Koomler Drive
LaPorte, IN 46350
4. Select the Timed Drying cycle (and
temperature, if needed) or the Fluff Air
cycle (see page 10).
5. Push the Start Button.
The drying rack lets you dry items that you
may not want to tumble. The rack does not
move, but the drum turns.
1. Fit rear le ,s of the rack into indentations in
NOTES:
Lower the front so the legs
rest on the dryer opening,
the back wall of the dryer.
2. Put wet items on top of the rack. Leave
can reach all surfaces.
I_
NOTE: Make sure nothing
pace between
the items
air
hangs
over the edge
of thesorack.
• See the chart below for suggested cycles
and settings for the different types of items
that might best be rack dried.
• The rack must be removed for normal
tumbling.
• Drying time will depend on how much
moisture the items hold. The following
chart suggests drying times.
• Automatic cycles do not work with the
drying rack.
3. Close the door.
RACK DRY
Wool sweaters
CYCLE
TEMPERATURE
TIME*
(minutes)
Timed
Drying
LOW
6O
(Block to shape and lay flat on the rack)
Stuffed toys or pillows
(Cotton or polyester fiber filled)
Timed
Drying
LOW
6O
Fluff Air
None; cycle is unheated.
7O
Stuffed toys or pillows
(Foam rubber filled)
Sneakers or canvas shoes
30-40
Reset cycle as needed to complete drying.
11
Caring for Your Dryer
Proper care of your dryer can extend its life. This section explains how to care for your dryer
properly and safely.
Cleaning
Every
load
the lint screen
cleaning
The lint screen is located under a lid on top
of the dryer. Clean it before each load. A
screen blocked by lint can increase drying
time.
To clean:
1. Open the lid and pull the lint screen
_
towards you.
2. Roll lint off the screen with your fingers.
remove lint. Wet lint is hard to
remove.
Do not rinse or wash screen to
3. Push the lint screen firmly back into place
and close the lid.
IMPORTANT:
• Do not run the dryer with the lint screen
loose, damaged, blocked, or missing.
Doing so can cause overheating and
damage to both the dryer and fabrics.
• Some towels made of synthetic fibers and
natural fibers (polyester and cotton blends)
may shed more lint than other towels,
causing your dryer's lint screen to fill up
faster. Be sure to remove lint from the lint
screen before and after drying new towels.
12
As
needed
cleaning
Laundry detergents and fabric softeners can
cause a residue buildup on the lint screen.
Clean the lint screen with a nylon brush
every six months or more frequently if it
becomes clogged due to a residue buildup.
Use the following method:
1. Wet both sides of lint screen with hot
water.
2. Wet a nylon brush with hot
liquid detergent;
screen with the
remove residue
water and
scrub lint
brush to
buildup.
3. Rinse screen with hot water.
4. Thoroughly dry lint screen with a clean
towel; replace in dryer.
Cleaning
the dryer interior
Garments which contain unstable dyes,
such as denim blue jeans or brightly colored
cotton items, may discolor the dryer interior.
To clean dryer drum:
1. Make a paste with detergent and very
warm water.
2. Apply paste to a soft cloth and scrub area
until all excess dye is removed.
OR
Explosion Hazard
Use nonflammable cleaner only.
Apply liquid nonflammable
household cleaner to the
stained area and rub with a
cloth until all excess dye is removed.
Failure to do so can result in death,
explosion, or fire.
3. Wipe thoroughly with a damp cloth.
4. Tumble a load of rags to dry.
Changing
the drum
light
The dryer light automatically turns on inside
the dryer drum when you open the door.
To change drum light:
1. Unplug the dryer or disconnect the
electricity leading to the dryer at the main
power supply.
2. Open the dryer door. Remove the light
bulb cover from the back wall
I
,_"_'_
cover clockwise.
I of the dryer by turning the
3. Remove the light bulb by turning it
counterclockwise.
4. Replace the bulb with a 40-watt appliance
bulb only.
Fire Hazard
Unplug dryer before changing
light bulb.
Replace light bulb cover before
operating dryer.
Failure to do so can result In death,
fire, or electrical shock.
5. Replace the light bulb cover and lock in
place by turning the cover
i
c°un erc°° w e
6. Reconnect power supply.
13
Removing
accumulated
lint
Lint can gather inside the dryer and be a fuel
for fire. Lint should be removed every two to
three years, or more often, depending on
dryer usage. Cleaning should be done by a
qualified person. If you have any questions
or comments, please call our Consumer
Assistance Center at 1-800-253-1301.
Electrical Shock Hazard
Unplug dryer before removing dryer
panels.
Wear gloves when handling dryer
parts.
Make sure door switch wires are not
touching the dryer drum before
closing the top. See page 16, Step 7.
Failure to do so can result in death,
electrical shock, or serious cuts.
For all electric dryers, or gas dryers
which have a lower front access panel
Thermostats
Heater
box
Heat element
terminals
NOTE: See page 15 if your dryer is gas and
has a full front panel.
1. Unplug the power supply cord or turn off
the electrical power.
2. Remove back panel (electric) or lower
front access panel (gas). See the Installation Instructions.
3. Remove lint from shaded area in illustration with a soft brush or vacuum cleaner.
Avoid damaging wires, thermostats
(electric), funnel (gas), or ignitor (gas).
4. Replace panel.
Electric dryer with back panel removed
Igni
Funnel
5. Reconnect and level dryer again, if
necessary.
Gas dryer with lower front
access panel removed
14
Electrical Shock Hazard
Unplug dryer before removing
dryer panels.
Wear gloves when handling
dryer parts.
Make sure door switch wires are not
touching the dryer drum before
closing the top.
Failure to do so can result in death,
electrical shock, or serious cuts.
If your dryer is gas and has a full front
panel, remove front panel as follows:
1. Unplug the power supply cord or turn off
the electrical power.
2. Open lint screen lid. Remove two screws
from lint screen area.
Remove screws
before opening top
3. Open top by pulling forward and up at
each front corner (see View A), Rest
raised top against wall behind dryer (top
is hinged at rear).
View A
continued on next page
15
Electrical Shock Hazard
Unplug dryer before removing dryer panels.
Wear gloves when handling dryer parts.
Make sure door switch wires are not touching the dryer drum
before closing the top.
Failure to do so can result in death, electrical shock, or
serious cuts.
4. Remove two internal screws from front
panel flanges (near top front corners). Lift
front panel slightly, lifting off lower clips
(see lower clip inset of View B). Slowly
pull front panel forward, disengaging
panel from drum. (Drum will drop slightly.)
5. Move front panel aside and rest edge
against side of dryer. Avoid disconnecting
wire clips (see wire clips inset of View B)
or damaging wires.
6. Remove lint from area shown in "gas
dryer" illustration on page 14 with soft
brush or vacuum cleaner. Avoid damaging wires, funnel, or ignitor.
7. Reassemble in reverse order. Before
closing the top, check the following:
-Drum seal must be flared out (see
drum seal insets of View B) and properly positioned against panel at back of
drum. Rotate drum counterclockwise
one full turn to check drum seal.
-Belt should be centered and tight on
dryer drum.
-Wire clips which hold the door switch
wires must be anchored in slot in top
of front panel (see wire clips inset of
View B) and along top edge of side
panel. Door wires must not touch drum
when dryer is operating.
8. Replace top panel and lint screen screws.
Top and front panels must be securely in
place before operating dryer.
9. Reconnect power and level dryer again,
if necessary.
16
View B
For more information, call our
Consumer Assistance Center
24 hours a day.
1-800-253-1301
Laundry Tips
This section provides information on preparing clothes for drying, drying guidelines, and
instructions for drying special-care items.
NOTES:
•Reter to your Washer Use and Care Guide for proper washing techniques and additional
laundry tips.
• See pages 3 and 4 of this book for Important Safety Information.
Sorting
clothes
• Separate dark from light colors; colorfast
Irom non-colorfast. Items
properly sorted for washing are
usually properly sorted for
drying.
• Separate lint givers (towels, chenille) from
lint takers (corduroy, synthetics, permanent press). When possible, turn lint takers
inside out.
• Separate heavy fabrics (denim, towels)
from light fabrics (synthetics, permanent
press),
|
•
Choosing
load sizes
• Mix large items with smaller items. Load
space items take up, not by
their weight. Do not overload
the
the amount of
the dryer
dryer. by
Overcrowding
causes uneven drying and
wrinkling, and can cause items to wear out
faster (because of pilling).
• You may need to rearrange large items
(sheets, blankets, tablecloths) during a
cycle to reduce bailing or rolling up.
Drying
• For better tumbling action, when drying
only a few small items, add one or two
lint-free towels. This also prevents small,
lightweight items from blocking airflow.
tips
• Close zippers, snaps, and hooks to avoid
snagging other items. Remove
heat-sensitive trim that can be
damaged by drying. Tie strings
and sashes so they will not
tangle.
• Check garments to make sure all spots
and stains were removed during the wash.
Do not tumble dry soiled or stained items.
Heat may permanently set stains.
• Sharp or metal objects can damage your
dryer. Check pockets for pins,
clips, money, bolts, nuts, etc.
Do not lay these objects on
your dryer after emptying
pockets. Turn pockets of
heavy items inside out for even drying.
• Place small items such as baby socks or
hankies in a mesh bag for easier removal.
• Articles to be ironed should be removed
from the dryer while still damp.
17
Using
dryer
fabric
softeners
Dryer fabric softeners are recommended for
reducing static cling and for softening
fabrics. Always follow package instructions
carefully.
• Put one fabric softener sheet on top of the
load before starting the
dryer. Do not add a fabric
softener sheet after the drying
cycle has started. Instant heat
can cause the fabric softener
to spot fabrics.
Saving
energy
• Use an Automatic cycle to dry most loads.
• Dry only full loads without overdrying.
• Avoid overloading dryer, adding wet items
to a partly dried load, or opening the door
unnecessarily.
• Plan your laundry to dry one load after
another. A warm dryer shortens drying
time.
Vacation
care
1. Unplug power supply cord or turn off
electrical power supply.
2. Clean lint screen.
18
• Remove fabric softener stains by wetting
the stains and rubbing them with liquid
detergent or bar soap and rewash.
• Some fabric softeners can clog the lint
screen and slow drying. Use fabric softeners labeled as dryer safe.
• Shorten drying times by exhausting dryer
properly and cleaning exhaust duct and
outside exhaust hood as needed.
-Keep the lint screen clean.
- Use your dryer in a room where room air
temperature is above 45°F (7°C).
-Sort loads by fabric weight and type.
Drying
special-care
items
Most garments and household textiles have manufacturer's care labels with laundering
instructions. Always follow care label directions when they are available. Pages 9 and 10
include drying instructions for most types of washables. The chart below provides drying
instructions for special-care washables.
ITEMS
DRYING INSTRUCTIONS
Blankets and
woolens
Machine drying knitted woolens is not recommended. Block to shape
when wet and allow to air dry. Line dry blankets in the shade on a
breezy day over two lines. Pin edges together and straighten them.
When partly dry, turn the blanket over, re-pin, and re-straighten.
When dry, brush nap.
• Cotton, rayon,
synthetic blankets
* Electric blankets,
electric sheets,
woolen blankets,
washable woolen
garments
Dry as recommended
for permanent press fabrics on page 9.
If manufacturer recommends machine drying:
1. Place one or two dry towels in the dryer and preheat 3-5
minutes on a high setting. This will dry blankets faster and help
avoid pilling.
2. Put blanket in dryer with warm towels. Set control for 20 minutes.
3. Check after 10 minutes. Remove when still damp. Overdrying and
long tumbling can cause shrinking and pilling.
4. Place blanket on flat surface, or over two lines to finish drying.
Gently stretch to original size and shape.
5. When completely dry, brush gently to raise nap. Press binding
with cool iron if needed.
Curtains,
slipcovers
Remove drapery weights and hooks before laundering.
For slipcovers, replace while still slightly damp. They will dry to fit
tightly.
• Draperies,
slipcovers
Dry only a few minutes.
1. Leave room in dryer for load to fluff.
2. Remove from dryer while slightly damp. Do not overdry.
Diapers, baby
clothes
Wash and dry small items in a mesh bag or pillowcase for
convenient handling.
Remove diapers and cotton knit items while still slightly damp. They
will feel softer, shrink less, and be easier to fold.
Elastic items
Remove from dryer while still slightly damp.
Flame-retardant
clothing
Some items have been treated with a flame-retardant finish to
improve their resistance to burning. Such items are clearly labeled.
To retain flame-retardant qualities through continuous use and
washing, clean and dry according to the manufacturer's instructions.
continued on next page
19
ITEMS
DRYING INSTRUCTIONS
Knits, washable
Do not overdry knits. Overdrying can cause shrinking and static cling.
1. Select cycle according to fabric and construction.
2. Turn synthetics and blends inside out when drying to avoid pilling.
3. Remove cotton and rayon knits while still slightly damp. Stretch into
shape and lay flat to finish drying.
Napped items
Dry separately or with similar colors to avoid lint transfer. Follow care
label instructions.
* Corduroy,
velveteen
1. Remove from dryer while there is still a trace of moisture.
Quilted, downfilled items
Follow care label instructions.
Snowsuits,
jackets
Check label for fiber content, then follow care label instructions.
', Nylon or
polyester
1. Dry garment for about 10 minutes. Remove and turn inside out.
Dry for 10 more minutes.
2. Remove from dryer immediately and hang on a non-rusting hanger
to finish drying. This will help eliminate wrinkles.
Tinted, dyed, or
noncolorfast
items
Dry according to fabric, weight, and care label instructions. Wipe the
dryer drum carefully to remove any dye or lint that can be transferred
to other loads. See =Cleaning the dryer interior" on page 13.
2O
2. Smooth, reshape, and air dry before putting away.
1. Dry one at a time.
2. Remove from dryer and shake or fluff the item during the drying
cycle.
3. Smooth and reshape before putting away.
oubleshooting
Most laundering problems are easily solved if you understand the cause. Check the following
list for laundry problems you may have and their possible causes. Also refer to the next page
for a dryer checklist which can help you solve some simple problems without calling for
service, if you still need help, see "Requesting Assistance or Service" on page 23.
Common
laundry
problems
PROBLEM
CAUSE
Greasy spots
• Dryer fabric softener improperly used. See manufaclurer's
directions.
• Drying soiled items.
Lint
• Full lint screen. (See page 12.)
• Load not properly sorted.
• Overdrying, especially synthetic fabrics that cause lint-attracting
static electricity.
• Load size too big or heavy.
• Tissue or paper left in pockets.
• Pilling (surface fuzz caused by normal wear and laundering)
attracts lint.
Shrinking
= Overdrying.
• Fabric type and quality inappropriate for drying.
• Dryer settings incorrect for fabric type.
• Manufacturer's
Slow drying
care label instructions not fo[Iowed.
• Full lint screen.
• Load too large and bulky to dry quickly.
• Dryer located in room with temperature below 45°F (7°C).
• Exhaust duct clogged, restricted, or too long.
Stains
• Drying soiled items.
• Dryer fabric softener improperly used. See manufacturer's
directions.
• Dryer interior stained. (See page 13 for cleaning procedures.)
Static
• Overdrying.
electricity
• Dryer fabric softener improperly used. See manufacturer's
directions.
• Load includes synthetics, synthetic blends, permanent press, and knit
fabrics that build up static electricity.
Wrinkling
• Overloading.
• Overdrying, especially permanent press and synthetic fabrics.
• Clothes left in dryer at end of cycle.
21
Common
dryer
problems
Before calting for service, check these:
ls the dryer door firmly closed?
Are the controls set in an ON position?
Did you firmly push the Start Button?
Is lint screen clogged with lint?
Is the power cord plugged in?
Have you blown a fuse or tripped a circuit breaker?
Is exhaust duct or outside exhaust hood clogged with lint?
(_
For gas dryers, are the valves open on the dryer and the supply line?
Is the dryer making noise? Is there a thumping sound from support rollers
indicating dryer has not been used for awhile? Is the lint signal sounding?
If you still have problems, see "Requesting Assistance or Service" on page 23.
22
Requesting
Assistance
or
Service
Before calling for assistance or service, please check "Troubleshooting" on pages 21-22. It
may save you the cost of a service call. If you still need help, follow the instructions below.
1.
If you
need
assistance*
3. If you need
...
replacement
Call the Whirlpool Consumer Assistance
Dial toll-free from anywhere
in the U.S.A.:
Center telephone number.
1-800-253-1301
and talk with one of our trained
consultants. The consultant can instruct you
in how to obtain satisfactory operation from
your appliance or, if service is necessary,
recommend a qualified service company in
your area.
If you prefer, write to:
Mr. William Clark
Consumer Assistance Representative
Whirlpool Corporation
2000 North M-63
Benton Harbor, MI 49022-2692
2.
If you
need
service*
...
Whirlpool has a nationwide network of
authorized Whirlpool service
technicians
trainedservice
to fulfill
companies. are
Whirlpool
the product warranty and
provide after-warranty service,
anywhere in the United States. To locate the
authorized Whirlpool service company in
your area, call our Consumer Assistance
Center telephone number (see Step 1) or
look in your telephone directory Yellow
Pages under:
-APPLIANCE-HOUSEHOLDMAJOR, SERVICE & REPAIR
• WASHING MACHINES &
DRYERS, SERVICE & REPAIR
- See: WhirlpOOl/_ptiances
or
A_horized WhirlpOOl Service
• See: Whirlpo01 Apptiances o;
Authorized Whirlpool Ser_ce
(Example:
XYZ Se,'v_¢e CO.)
(Ex_mpl_
XYZ S_rvice
parts
...
FSP is a registered trademark of Whirlpool
Corporation for quality parts. Look for this
symbol of quality whenever you need a
replacement part for your WHIRLPOOL ®
appliance. FSP replacement parts will fit
right and work right, because they are made
to the same exacting specifications used to
build every new WHIRLPOOL appliance.
To locate FSP replacement parts in your
area, refer to Step 2 or call the Whirlpool
Consumer Assistance Center number in
Step 1.
4.
Please include a daytime phone number in
your correspondence.
FSP ®
If you are not satisfied
with
how the problem
was solved
,..
• Contact the Major Appliance Consumer
Action Program (MACAP). MACAP is a
group of independent consumer experts
that voices consumer views at the highest
levels of the major appliance industry.
• Contact MACAP only when the dealer,
authorized servicer, and Whirlpool have
failed to resolve your problem.
Major Appliance Consumer Action Program
20 North Wacker Drive
Chicago, IL 60606
• MACAP will in turn inform us of your action.
CO.)
Please provide a detailed description of the problem, your appliance's complete model
and serial numbers, and the purchase date. (See page 2.) This information will help us
I * When asking for help or service:
respond properly to your request.
i
23
WHIRLPOOU
Dryer Warranty
LENGTH OF WARRANTY
WHIRLPOOL WILL PAY FOR
FULL ONE-YEAR WARRANTY
From Date of Purchase
FSP ® replacement parts and repair labor to correct
defects in materials or workmanship. Service must be
provided by an authorized Whirlpool service company.
WHIRLPOOL
WILL NOT PAY FOR
A. Service calls to:
1. Correct the installation of your dryer.
2. Instruct you how to use your dryer.
3. Replace house fuses or correct house wiring or plumbing.
4. Replace light bulbs.
B. Repairs when your dryer is used in other than normal, single-family household use.
C. Pickup and delivery. Your dryer is designed to be repaired in the home.
D. Damage to your dryer caused by accident, misuse, fire, flood, acts of God, or use of
products not approved by Whirlpool.
E. Repairs to parts or systems caused by unauthorized modifications made to the
appliance.
10-95
WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so this exclusion or limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
Outside the United States, a different warranty may also apply. For details, please
contact your authorized Whirlpool dealer.
If you need service, first see the "Troubleshooting" section of this book. After checking
"Troubleshooting," additional help is available by checking the "Requesting Assistance
or Service" section, or by calling our Consumer Assistance Center telephone number,
1-800-253-1301, from anywhere in the U.S,A.
PART NO. 3401096
© 1996 Whirlpool
Corporation
(E-Line)
1!9_
® Registe_ed Trademark,rFM Trademark
of Whirlpool,
USA
Pnntecl in U.SA
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 24 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 4, 0, 0, 13 Create Date : Sun Mar 23 04:18:50 2008 Author : Title : Subject :EXIF Metadata provided by EXIF.tools