Whirlpool Rf375Pxe Users Manual Unknown

2015-01-23

: Whirlpool Whirlpool-Rf375Pxe-Users-Manual-304382 whirlpool-rf375pxe-users-manual-304382 whirlpool pdf

Open the PDF directly: View PDF .
Page Count: 44

Download
Open PDF In Browser	View PDF

TimeSmart

Tips Inside!

Self-Cleaning
Electric Ranges
A Note to You............ 2
Range Safety ......... 3-5
Parts and Features ... 6
Using Your Range ..... 8
Using the SelfCleaning Cycle........ 26
Caring for Your
Range ..................... 29
Troubleshooting ...... 39
Requesting
Assistance or
Service .................... 41
Index ....................... 43
Warranty ................. 44

1-800-253-1301

Call our Consumer Assistance Center
with questions or comments.

4.65 Cubic Foot Oven

MODELS RF375PXE RF376PXE
PART NO. 3196277 Rev. C

A NOTE TO YOU
Thank you for buying a WHIRLPOOL® appliance.
Because your life is getting busier and more complicated, WHIRLPOOL appliances are easy to use, save
time, and help you manage your home better. To
ensure that you enjoy years of trouble-free operation,
we developed this Use and Care Guide. It is full of
valuable information about how to operate and
maintain your appliance properly and safely. Please
read it carefully.
Also, complete and mail the Product Registration
Card provided with your appliance. The card helps
us notify you about any new information on
your appliance.

Look for these tips!
Look for these Time Smart Tips located
throughout your Use and Care Guide. They
will help you save time and make the most
of your new appliance.

Please record your model’s information.
Whenever you call to request service for your appliance, you need to know your complete model number
and serial number. You can find this information on the
model and serial number label/plate (see the diagram
in the “Parts and Features” section). Also, record the
other information shown in the next column.

Model Number __________________________________
Serial Number ___________________________________
Purchase Date __________________________________
Dealer Name ____________________________________
Dealer Address __________________________________
Dealer Phone ___________________________________

Keep this book and the sales slip together in a safe place for future reference.
Our Consumer Assistance Center number is toll free.

1-800-253-1301

To find detailed product information, the location of the nearest Whirlpool dealer or authorized servicer, to
purchase an accessory item, or register your appliance on-line, please visit our Web site at
www.WhirlpoolAppliances.com

R ANGE SAFETY
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. Always read and
obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the word “DANGER” or
“WARNING.” These words mean:

wDANGER

You will be killed or seriously injured if you don’t
follow instructions.

wWARNING

You can be killed or seriously injured if you don’t
follow instructions.

All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

wWARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved.
See the installation instructions for details.
Failure to follow these instructions can result in death or serious burns
to children and adults.
Anti-Tip Bracket

Range Foot

Making sure the anti-tip bracket is installed:

• Slide range forward.
• Look for the anti-tip bracket securely attached to floor.
• Slide range back so rear range foot is under anti-tip bracket.
continued on next page

RANGE SAFETY

IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical
shock, injury to persons, or damage when using
the range, follow basic precautions, including the
following:
• WARNING – TO REDUCE THE RISK OF
TIPPING OF THE RANGE, THE RANGE MUST
BE SECURED BY PROPERLY INSTALLED
ANTI-TIP DEVICES. TO CHECK IF THE DEVICES
ARE INSTALLED PROPERLY, SLIDE RANGE
FORWARD, LOOK FOR ANTI-TIP BRACKET
SECURELY ATTACHED TO FLOOR, AND SLIDE
RANGE BACK SO REAR RANGE FOOT IS
UNDER ANTI-TIP BRACKET.
• CAUTION – Do not store items of interest to
children in cabinets above a range or on the
backguard of a range – children climbing on the
range to reach items could be seriously injured.
• Proper Installation – Be sure the range is properly
installed and grounded by a qualified technician.
• Never Use the Range for Warming or Heating
the Room.
• Do Not Leave Children Alone – Children should
not be left alone or unattended in area where the
range is in use. They should never be allowed to
sit or stand on any part of the range.
• Wear Proper Apparel – Loose-fitting or hanging
garments should never be worn while using
the range.
• User Servicing – Do not repair or replace any part
of the range unless specifically recommended in
the manual. All other servicing should be referred
to a qualified technician.
• Storage in or on the Range – Flammable
materials should not be stored in an oven or
near surface units.
• Do Not Use Water on Grease Fires – Smother
fire or flame or use dry chemical or foam-type
extinguisher.
• Use Only Dry Potholders – Moist or damp
potholders on hot surfaces may result in burns
from steam. Do not let potholder touch hot
heating elements. Do not use a towel or other
bulky cloth.

• DO NOT TOUCH SURFACE UNITS OR AREAS

NEAR UNITS – Surface units may be hot even
though they are dark in color. Areas near surface
units may become hot enough to cause burns.
During and after use, do not touch, or let clothing
or other flammable materials contact surface
units or areas near units until they have had
sufficient time to cool. Among those areas are
the cook-top and surfaces facing the cook-top.
• Use Proper Pan Size – The range is equipped
with one or more surface units of different size.
Select utensils having flat bottoms large enough
to cover the surface unit heating element. The
use of undersized utensils will expose a portion
of the heating element to direct contact and may
result in ignition of clothing. Proper relationship
of utensil to burner will also improve efficiency.
• Never Leave Surface Units Unattended at High
Heat Settings – Boilover causes smoking and
greasy spillovers that may ignite.
• Make Sure Reflector Pans or Drip Bowls Are in
Place – Absence of these pans or bowls during
cooking may subject wiring or components
underneath to damage.
• Protective Liners – Do not use aluminum foil to
line surface unit drip bowls or oven bottoms,
except as suggested in the manual. Improper
installation of these liners may result in a risk of
electric shock, or fire.
• Glazed Cooking Utensils – Only certain types of
glass, glass/ceramic, ceramic, earthenware, or
other glazed utensils are suitable for range-top
service without breaking due to the sudden
change in temperature.
• Utensil Handles Should Be Turned Inward and
Not Extend Over Adjacent Surface Units – To
reduce the risk of burns, ignition of flammable
materials, and spillage due to unintentional
contact with the utensil, the handle of a utensil
should be positioned so that it is turned inward,
and does not extend over adjacent surface units.
• Do Not Soak Removable Heating Elements –
Heating elements should never be immersed
in water.

– SAVE THESE INSTRUCTIONS –

RANGE SAFETY

IMPORTANT SAFETY INSTRUCTIONS
• Do Not Cook on Broken Cook-Top – If cook-top

should break, cleaning solutions and spillovers
may penetrate the broken cook-top and create a
risk of electric shock. Contact a qualified technician immediately.
• Clean Cook-Top With Caution – If a wet sponge
or cloth is used to wipe spills on a hot cooking
area, be careful to avoid steam burn. Some
cleaners can produce noxious fumes if applied to
a hot surface.
• Use Care When Opening Door – Let hot air or
steam escape before removing or replacing food.
• Do Not Heat Unopened Food Containers –
Build-up of pressure may cause container to
burst and result in injury.
• Keep Oven Vent Ducts Unobstructed.
• Placement of Oven Racks – Always place oven
racks in desired location while oven is cool. If
rack must be moved while oven is hot, do not let
potholder contact hot heating element in oven.
• DO NOT TOUCH HEATING ELEMENTS OR
INTERIOR SURFACES OF OVEN – Heating
elements may be hot even though they are dark
in color. Interior surfaces of an oven become hot
enough to cause burns. During and after use, do
not touch, or let clothing or other flammable
materials contact heating elements or interior
surfaces of oven until they have had sufficient
time to cool. Other surfaces of the appliance may
become hot enough to cause burns – among
these surfaces are oven vent openings and
surfaces near these openings, oven doors, and
windows of oven doors.

For self-cleaning ranges –
• Do Not Clean Door Gasket – The door gasket is
essential for a good seal. Care should be taken
not to rub, damage, or move the gasket.
• Do Not Use Oven Cleaners – No commercial oven
cleaner or oven liner protective coating of any kind
should be used in or around any part of the oven.
• Clean Only Parts Listed in Manual.
• Before Self-Cleaning the Oven – Remove broiler
pan and other utensils.
For units with ventilating hood –
• Clean Ventilating Hoods Frequently – Grease
should not be allowed to accumulate on hood
or filter.
• When flaming foods under the hood, turn the fan
off. The fan, if operating, may spread the flame.

– SAVE THESE INSTRUCTIONS –

PARTS AND FEATURES

This section contains captioned pictures of your range. Use them to learn where all parts and
features are and what they look like. Use the page references to help you quickly find out more
about the part or feature you are interested in.
(Model RF375PXE shown)
Manual oven
light switch
(p. 38)

OFF
HI
OFF

HI
8

8
2

TIMER
3

BAKE
BROIL
START ?
T
PREHEA
CLEAN

OFF
HI
LO
8

O
G OVEN

SELF-CLEANIN

DOOR LOCKED

CLOCK

Oven vent
(p. 23)

OFF

HI
3

BAKE

7
6

CUSTOM
BROIL

AUTO
CLEAN

TE P/
TEMP/
TIME

START
ENTER

TIMER
• • CANCEL

3
PUSH TO

TURN

6
4

OFF
CANCEL

5 SEC

2
7

PUSH TO

TURN

3
6
4

Control panel
(pp. 8, 29)

Plug-in coil
element with one-piece
reflector bowl
(pp. 8, 29, 30, 31)

Automatic oven
light switch
(p. 38)

Broil element
(not shown)
(p. 20)

Anti-tip bracket
(p. 24)

Bake element
(p. 16)

Model and serial
number plate
(behind left side
of storage drawer)
Removable
storage drawer
(p. 25)

CONTROL PANEL
Surface heating
indicator light
(lights up when a
coil element is on)

Left front
control knob
6

Left rear
control knob

Electronic
oven control

Coil element marker
(shows which coil
element you are setting)

Right rear
control knob

Right front
control knob

PARTS AND FEATURES

(Model RF376PXE shown)
Manual oven
light switch
(p. 38)

OFF
HI
OFF

HI
8

8
2

TIMER
3

BAKE
BROIL
START ?
T
PREHEA
CLEAN

OFF
HI
LO
8

O
G OVEN

SELF-CLEANIN

DOOR LOCKED

CLOCK

Oven vent
(p. 23)

OFF

HI
3

BAKE

7
6

CUSTOM
BROIL

AUTO
CLEAN

TEMP/
TIME

START
ENTER

TIMER
• • CANCEL

3
PUSH TO

TURN

6
4

OFF
CANCEL

5 SEC

2
7

PUSH TO

TURN

3
6
4

Control panel
(pp. 8, 29)

CLEANTOP®
ceramic glass
cooktop
(pp. 10, 34)

ACE

HOT

SURF

Automatic oven
light switch
(p. 38)

Surface
cooking
area
(pp. 10, 34)

Broil element
(not shown)
(p. 20)

Anti-tip bracket
(p. 24)

Bake element
(p. 16)

Model and serial
number plate
(behind left side
of storage drawer)
Removable
storage drawer
(p. 25)

CONTROL PANEL
Surface heating
indicator light
(lights up when a surface
cooking area is on)

Left front
control knob

Left rear
control knob

Electronic
oven control

Surface cooking area marker
(shows which surface cooking
area you are setting)

Right rear
control knob

Right front
control knob
7

USING YOUR RANGE

To get the best cooking results, you should use your range the correct way. This section tells you
what you need to know to use your range safely and efficiently.

USING THE SURFACE COOKING AREAS
Using the control knobs

wWARNING

Push in the control knobs before turning them to a
setting. You can set
them anywhere between
HI and OFF.

Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.

Surface cooking area heat settings
Use the following chart as a guide.
SETTING

RECOMMENDED USE

• To start foods cooking.
• To bring liquids to a boil.

6-8

• To hold a rapid boil.
• To fry chicken or pancakes.
• For gravy, pudding, and icing.
• To cook large amounts of

vegetables.

2-4

• To keep food cooking after

starting it on a higher setting.

• To keep food warm until it’s
ready to serve.

Easy ways to save energy

• Match the pan to the surface cooking

area size.
• The pan should have a flat bottom,
straight sides, and a well-fitting lid.
• To help shorten your cooking time, use
the least amount of liquid possible.
• Preheat your pots and pans only when
recommended and for the shortest time
possible.
• Start your food on a higher heat setting,
then turn the control to a lower setting to
finish cooking.
• Place a filled pan on the surface cooking
area before turning it on.
• Coil element model: Keep your reflector
bowls clean for best heat reflection.

USING YOUR RANGE

USING THE SURFACE COOKING AREAS (CONT.)
Using cookware

Home canning information

• Use the correct cookware to prevent damage to

To protect your range:
• Use flat-bottomed canners/pans for best results.
• Use the largest
surface cooking area for
best results. Also, use a
canner/pan that you can
center over the surface
1"
1"
cooking area and that
does not extend more
than one inch outside
the surface cooking
Surface
Pan
area. Large diameter
cooking area
canners/pans, if not
centered correctly, trap heat and can cause
damage to the cooktop.
• Do not place your canner on 2 surface cooking
areas at the same time.
Too much heat will build
up and damage the
cooktop.
• Start with hot water.
This reduces the time
the control is set on
high. Reduce the heat
setting to the lowest
position needed to keep
water boiling.
When
canning
for
long
periods
of time, alternate
•
use of the surface cooking areas between batches
to allow the areas to cool down, or prepare food in
small batches.
• On coil element model, keep your reflector bowls
clean so that they will always reflect heat well.
• Refer to your canner manual for specific
instructions.

the surface cooking area, cooktop, wiring, and
surrounding areas.
• If the cookware is too small for the surface
cooking area or the bottom is not flat, the surface
cooking area could stay glowing red for an
extended length of time causing damage to
the range.
• If you start cooking on high, it is important to turn
the control down to a lower setting to complete
cooking.
• The surface cooking area could overheat or be
damaged if a pot has boiled dry or has been left
empty on a hot surface cooking area.

Using the right cookware
makes a big difference

• Flat bottomed cookware, including woks,

canners, and teakettles, will provide better
contact with the surface cooking area and
provide the best cooking results.
• Warped, dented, and ribbed-bottomed
cookware can result in uneven cooking
due to incomplete contact with the
surface cooking area.
• Cookware that has been designed with
slightly indented bottoms or small
expansion channels can be used.
• Choose medium to heavy gauge
(thickness) cookware.
• The pan material (type of metal or glass)
affects how quickly and evenly the
pan heats.

Optional canning kit
(Coil element cooktop model)
Most water-bath or pressure canners have large
diameters. If you do canning with them at high heat
settings for long periods of time, you can shorten
the life of regular coil elements. This can also
damage the cooktop. If you plan to use the cooktop
for canning, we recommend the installation of a
Canning Kit. Order the kit (Part No. 242905) from
your Whirlpool dealer or authorized Whirlpool
service company.

USING YOUR RANGE

USING THE SURFACE COOKING AREAS (CONT.)
Using the ceramic glass cooktop
(Ceramic glass cooktop model)
Cooking on the ceramic glass cooktop is similar
to cooking on coil
elements. There are,
however, a few
differences:
• The surface cooking
area will glow red when
the element is turned
on. You will see the
element cycling on and
off – even on the HI
setting – to help the
area stay at the temperature setting you chose.
• Do not cook foods directly on the cooktop.
• Do not cook popcorn that comes in prepackaged
aluminum containers on the cooktop. The
container could leave aluminum marks on the
cooktop that cannot be removed completely.
• Lift pots and pans onto and off of the cooktop.
Sliding pots and pans on the cooktop could leave
marks that are difficult to remove or could leave
permanent marks.
• Dropping a heavy or hard object on the cooktop
could crack it. Be careful when using heavy
skillets and large pots. Do not store jars or cans
above the cooktop.
• Do not use the cooktop as a cutting board.
• Do not allow anything that could melt, such as
plastic or aluminum foil, to come in contact with
the cooktop while it is hot.

• Sugary spills and soils can cause pitting. See

“Cleaning the ceramic glass cooktop” in the
“Caring for Your Range” section for more
information.
• Wiping off the cooktop before and after each use
will help keep the surface free from stains and give
you the most even heating. See “Cleaning the
ceramic glass cooktop” in the “Caring for Your
Range” section for care and cleaning suggestions.

HOT SURFACE

Hot surface indicator lights
(Ceramic glass cooktop model)
One of the Hot Surface Indicator Lights on the
cooktop will glow when a surface
cooking area becomes too hot to
touch. The Indicator Light will continue
HOT SURFACE
to glow as long as the surface cooking
area is too hot to touch, even after it is
turned off.

Using cookware on
ceramic glass cooktops

• Check for rough spots on the bottom of

your metal or glass cookware which could
scratch the ceramic glass surface.
•Make sure the bottoms of pots and pans
are clean and dry before using them. Food
and water particles left on the bottoms can
leave deposits on the cooktop when it is
heated.
NOTE: Do not leave empty cookware, or cookware which has boiled dry, on a hot surface cooking
area. The cookware could overheat, causing damage
to itself or the surface cooking area.

USING YOUR RANGE

POSITIONING RACKS AND PANS
General guidelines
Follow this section carefully to get the best
cooking results.
• Before turning on the oven, place oven racks
where you need them.
• To move a rack, pull it out to the stop, raise the
front edge, and lift it out.
• Be sure the rack(s) is level.
• Use pot holders or oven mitts to protect your
hands if rack(s) must be moved while the oven
is hot.
• When baking/roasting with 1 rack, place the
rack so the top of the food will be centered in
the oven.
• When baking/roasting on 2 racks, position racks
in oven to allow good circulation of air around all
the food.
• Do not place items on the oven door when it
is open.

Rack placement for specific foods:
FOOD

RACK POSITION

Frozen pies, large
roasts, turkeys, angel
food cakes

1st or 2nd rack
guide from bottom

Bundt cakes, most
quick breads, yeast
breads, casseroles,
meats

2nd rack guide
from bottom

Cookies, biscuits,
muffins, cakes,
nonfrozen pies

2nd or 3rd rack
guide from bottom

NOTE: For information on where to place your
rack when broiling, see “Broiling guide” later in
this section.

Using insulated bakeware, ovenproof
glassware, and dark metal pans

• When baking with insulated cookie sheets

or baking pans, place them in the bottom
third of the oven. You may need to increase the recommended baking times,
so test for doneness before removing from
the oven.
• When using ovenproof glassware or dark
bakeware, reduce the oven temperature
by 25°F but use the same baking time.
Because these pans absorb heat, producing darker bottom browning and crispier
crusts, place the rack in the center of the
oven. When baking pies and bread, you
can use the temperature suggested in
the recipe.

USING YOUR RANGE

FOR BEST AIR CIRCULATION
Hot air must circulate around the pans in the oven
for even heat to reach
all parts of the oven.
This results in better
baking.
• Place the pans so
that one is not directly
over the other.
results,
• For best
allow 11⁄2-2 inches of
space around each pan
and between pans
and oven walls.
• For best baking results, bake 1 sheet of cookies
at a time.

Where to place pans:
WHEN YOU HAVE

PLACE

1 pan

In center of the oven rack.

2 pans

Side by side or slightly
staggered.

3 or 4 pans

In opposite corners on
each oven rack. Stagger
pans so no pan is directly
over another.

USING ALUMINUM FOIL FOR BAKING
Use aluminum foil to catch spillovers from pies
or casseroles:
• Place the foil on the oven rack below the rack
with the food. Turn up
the foil edges and make
sure the foil is about
1 inch larger all around
than the dish holding
the food.
• Do not cover the entire
rack with aluminum foil.
It will reduce air circulation and give you poor
cooking results.

• Do not line the oven bottom or the entire oven rack
with foil or other liners. It could affect the quality of
your baking.

USING YOUR RANGE

THE ELECTRONIC OVEN CONTROL
ON

TIMER

Indicator
lights
(see below)

Electronic
display

BAKE
BROIL
START ?
HEAT
CLEAN
DOOR LOCKED

BAKE

Bake pad
(p. 16)

CUSTOM
BROIL

SELF CLEANING OVEN

AUTO
CLEAN

CLOCK
TIME

TIMER
• • CANCEL

Custom broil Auto clean Temperature/
pad
time pads
pad
(p. 21)
(pp. 14, 16,
(p. 27)
19, 21, 27)

START

OFF

ENTER

CANCEL

5 SEC

Start/enter pad
(p. 15)
Off/cancel pad
(p. 15)

Clock/timer pads
(pp. 14-15)

Display

Using the control lock

• When you first plug in the range, “PF” will appear

The control lock lets you disable the control panel
command pads. The control lock comes in handy
when you want to prevent others from using
the oven.

on the display until you press any command
pad. If “PF” again appears on the display, your
electricity was off for a while. You will need to
reprogram any temperature adjustments you may
have made. See the “Adjusting the oven temperature control” section.
• When you are using the oven, the display will
show preheat times and temperature settings.
• When you are not cleaning or cooking with the
oven, the display will show the time of day.
• When setting a function, if you do not press the
start/enter pad within 5 seconds, the Start?
indicator light will flash. If you do not press the
start/enter pad within 5 minutes, the function will
be canceled.

Indicator lights
An indicator light to the left of the display lights up
when you are in a setting. An indicator light on the
display lights up when the oven is on.

NOTES:
• You can only use the control lock when the oven
is not in use or the control has not been set.
• Set the control lock when cleaning the control
panel to prevent yourself from accidentally turning
on the oven.
• You must reset the control lock if the power goes
out for more than 1 second.
To lock the control panel:
Press and hold the start/enter pad for 5 seconds.
You will hear a single tone and “Loc” will
START appear on the temperature display for
5 seconds. “Loc” and “START?” will
ENTER
then appear whenever a command pad
5 SEC
is pressed.
To unlock the control panel:
Press and hold the start/enter pad for 5 seconds.
You will hear a single tone and “Loc” and
START “START?” will disappear from the temperature display.
ENTER
5 SEC

USING YOUR RANGE

SETTING THE CLOCK
1. Press the clock pad.

PRESS

YOU SEE

CLOCK

2. Set the time.

PRESS

YOU SEE

Press the “up” (s) or “down” (t) pad(s) until
the correct time shows on the display.

(example for 5:30)

3. Start the clock.
NOTES:
• To see the time of day when the clock time
is not on the display, press the clock pad.
• You must reset the clock if the power goes
off for more than 1 second.

PRESS

YOU SEE

START OR CLOCK
ENTER
5 SEC

USING THE MINUTE TIMER
The minute timer does not start or stop the oven.
It works like a kitchen timer. You can set the
minute timer in hours and minutes up to 12 hours,
59 minutes. The minute timer will display minutes
and seconds for settings under 1 hour.

1. Press the timer pad.
The timer indicator light will light up.

PRESS

YOU SEE

TIMER
• • CANCEL

2. Set the countdown time.

PRESS

YOU SEE

Press the “up” (s) or “down” (t) pad(s) until
the correct time shows on the display.

(example for 10 minutes)

USING YOUR RANGE

USING THE MINUTE TIMER (CONT.)
3. Start the countdown.

PRESS
START

YOU SEE
OR •TIMER
• CANCEL

ENTER
5 SEC

(display counts down)

YOU SEE

When the time is up:
You will hear four 1-second tones.
NOTE: To see the countdown time when the
minute timer is not on the display, press the
minute timer pad.

4. Turn off the minute timer.

PRESS
TIMER

YOU SEE
(previous display)

• • CANCEL

twice

To cancel the minute timer during
the countdown

PRESS
TIMER

YOU SEE
(previous display)

• • CANCEL

twice

STARTING/CANCELING A FUNCTION
After setting a function for the first time, you
must press the start/enter pad to start
START the function.
ENTER

The off/cancel pad will cancel any function except for
the clock, minute timer, or control lock.
OFF
CANCEL

5 SEC

USING YOUR RANGE

BAKING/ROASTING
1. Place the racks where you need them in the oven.
For more information, see “Positioning racks and
pans” earlier in this section.

Front of rack

Rear of rack

2. Choose the bake setting.

PRESS

YOU SEE

The bake indicator light will light up.
BAKE

3. Set the temperature (optional).
Do this step if you want to set a temperature
other than 350°F. Press ▲ to raise the temperature or ▼ to lower the temperature in 5°F
amounts. You can set a temperature anywhere
from 170°F to 500°F. Use these pads until
the temperature you want shows on the display.

4. When roasting, put your food in the oven.
You do not have to preheat the oven when
roasting, unless your recipe recommends it.
During baking/roasting, the elements will turn
on and off to keep the oven temperature at
the setting.
NOTE: The top element helps heat during
baking/roasting, but does not turn red.

Roasting meats and poultry

• For even cooking, place the meat on a

rack in a shallow pan. This keeps the meat
out of the drippings and allows the heat to
circulate better.
• Use a meat thermometer for the most
accurate doneness. Insert it so the tip is in
the center of the largest muscle or thickest
portion of the meat or poultry. Make sure
the thermometer is not touching bone, fat,
or the bottom of the pan.

PRESS
TEMP
TIME

(example for bake at 375°F)

USING YOUR RANGE

BAKING/ROASTING (CONT.)
5. Press the start/enter pad.
A preheating time will count down on the display.
The heat, bake, and on indicator lights will light
up. The oven control automatically sets preheating
times based on the oven temperature you select:
• For 245°F and less, the preheating time is
3 minutes.
• For 250°F-445°F, the preheating time is
6 minutes.
• For 450°F and above, the preheating time is
10 minutes.
The oven is preheated and ready to use when
you hear a 1-second tone, the on indicator light
goes off, the countdown is finished, and the set
temperature is displayed.
The preheat and set temperatures may be
different at the end of the countdown. This
is normal.

PRESS

YOU SEE

START
ENTER
5 SEC

(example for set temperature
of 350°F)

NOTES:
• When the oven temperature is greater than
170°F, no preheating time will be shown in
the display.
• You can change the temperature setting any
time after pressing the start/enter pad. You do
not have to press the start/enter pad again.
• The preheating time will not change if you
reset the temperature before the countdown
time ends.
• If you are baking/roasting while the minute
timer is counting down, you can see the set
baking/roasting temperature for 5 seconds
by pressing the bake pad.
continued on next page

USING YOUR RANGE

BAKING/ROASTING (CONT.)
6. When baking, put your food in the oven after the
preheat countdown time ends.
During baking/roasting, the elements will turn
on and off to keep the oven temperature at
the setting.
NOTE: The top element helps heat during
baking/roasting, but does not turn red.

7. After cooking, turn off the oven.

PRESS
OFF
CANCEL

Save energy and save money

• “Oven peeking” can make cooking times

longer and affect food quality.
• Rely on a timer to keep track of cooking
time.
• Plan your meals for the most efficient use
of the oven by cooking more than one
food at a time, or baking while the oven
is still hot after cooking a meal.
• It is not necessary to preheat the oven
when broiling or roasting, unless your
recipe recommends doing so.

YOU SEE
(time of day or minute
timer countdown)

USING YOUR RANGE

ADJUSTING THE OVEN TEMPERATURE CONTROL
Although your new oven is properly adjusted to
provide accurate temperatures, it may cook faster
or slower than your old oven.
If you are not satisfied with the baking/roasting
results, you can change the offset temperature by
following the steps below.
NOTE: DO NOT measure oven temperature with a
thermometer. Opening the oven door will lower the
oven temperature and give you an incorrect reading.
Also, the thermometer temperature reading will
change as your oven cycles.

1. Press and hold the bake pad for 4 seconds.
The display will show 350°F for 4 seconds. Then
you will see the current offset temperature, for
example “00,” if you have not already adjusted
the temperature.

PRESS

YOU SEE

BAKE

(factory setting of “0”)

2. Set the new offset temperature.
Press s to raise the temperature or t to lower
the temperature in 10°F amounts. You can set
the temperature change to as low as -30°F or as
high as +30°F. A minus (-) sign will appear before
the number when decreasing the temperature
setting. The minus sign shows the oven will be
cooler by the displayed amount. There is no sign
in front of the number when increasing the
temperature setting.

3. Enter the adjustment.
NOTE: The offset temperature resets to “00” if
the power goes out for more than 1 second.

PRESS

YOU SEE

TEMP
TIME

(example when making
oven 10°F cooler)

PRESS
START

YOU SEE
(time of day or minute
timer countdown)

ENTER
5 SEC

How to determine the amount of
adjustment needed
The chart at the right tells you how much to adjust
the offset temperature to get the cooking results
you want. You can figure out cooking results by the
amount of browning, moistness, and rising times for
baked foods.

TO COOK FOOD ...
A little more
Moderately more
Much more
A little less
Moderately less
Much less

ADJUST BY
THIS NUMBER
OF DEGREES
(FAHRENHEIT)
+10
+20
+30
-10
-20
-30

USING YOUR RANGE

BROILING
NOTES:
• Do not preheat when broiling, unless your recipe
recommends it.
• Leave the door partly open whenever you use
the oven to broil. This lets the oven stay at the
proper temperatures.
• See “Broiling tips” later in this section.

1. Place the rack where you need it.
You need to place the rack so that the surface
of the food is at least 3 inches away from the
broil element. See “Broiling guide” later in this
section.

Front of rack

Rear of rack

2. Put your food on the broiler pan and place the
pan in the center of the oven rack.

3. Close the door to the broil stop position.
The broil stop position lets the door stay open
by itself about 5 inches.

USING YOUR RANGE

BROILING (CONT.)
4. Press the custom broil pad.

PRESS

YOU SEE

The broil indicator light will light up.
CUSTOM
BROIL

5. Start the oven.

PRESS

The on and heat indicator lights will light up.
NOTES:
• You can change the temperature setting any
time after pressing the start/enter pad. To
change the setting, see “To custom broil at a
lower temperature” below.
• If you are broiling while the minute timer is
counting down, you can see the set broiling
temperature for 5 seconds by pressing the
custom broil pad.

6. When broiling is done, turn off the oven.

START
ENTER
5 SEC

PRESS
OFF

YOU SEE
(time of day or minute timer
countdown)

CANCEL

To custom broil at a lower temperature:

PRESS

YOU SEE

• If food is cooking too fast, press the custom

broil pad and press the t temp pad until “325°F”
shows on the display.

CUSTOM
BROIL

(example shows broil at 325°F)
TEMP
TIME

• If you want food to broil slower from the start,

press the custom broil pad and press the t temp
pad so a temperature between 300°F and 500°F
shows on the display. Press the start/enter pad.
Lower temperature settings let the broil burner
cycle and slow cooking. The lower the temperature,
the slower the cooking.
NOTE: Fish and chicken are some foods that may
cook better if you use lower broiling temperatures.

PRESS

YOU SEE

CUSTOM
BROIL

(example shows broil at 400°F)
TEMP
TIME

START
ENTER
5 SEC

USING YOUR RANGE

BROILING TIPS
• Use the broiler pan and grid for broiling. They are
designed to drain extra liquid and grease away
from the cooking surface. This drainage helps
prevent spatter or smoke.
• Do not cover the broiler grid with foil.
• To make sure the grease drains well, do not use
cookie sheets or similar pans for broiling.

• Place food about 3 inches or more from the broil

element.
• After broiling, remove the broiler pan from the
oven when you remove the food. Drippings will
bake on the pan if you leave it in the heated oven.

Broiling guide
Recommended rack positions are numbered from
the bottom (1) to the top (5). For best results, turn
meat after approximately 2⁄3 of the broiling time.
Turn chicken pieces after approximately half of
the broiling time. Very thin cuts, such as fish fillets,
may not need to be turned at all. Lobster tails are
not turned.

MEAT

RACK
POSITION

Steak, 1" thick
medium rare
medium
well done

Hamburger Patties, 3⁄ 4" thick, 1⁄4 lb well done
Pork Chops, 1" thick

APPROXIMATE TIME
(MINUTES)
SIDE 1
SIDE 2
14-15
15-16
18-19

7-8
8-9
9-10

13-14

7-8

20-22

10-11

8-10

4-5

Ham Slice, 1⁄2" thick, precooked
Frankfurters

5-7

3-4

Lamb Chops, 1" thick

14-17

8-9

Chicken
bone-in pieces
boneless breasts

3
4

17-20
11-16

8-10
16-18

4-5
8-9

17-20

N/A

Fish
fillets 1⁄ 4-1⁄2" thick
steaks 3⁄ 4-1" thick

Lobster Tails, 6-8 oz

NOTE: Times are guidelines only and may need to be adjusted for individual tastes.

USING YOUR RANGE

THE OVEN VENT
wWARNING

Burn Hazard
Use pot holders when touching items left
near oven vent.
Failure to do so can result in burns.

Ceramic glass cooktop model
Hot air and moisture escape from the oven through
a vent on the backguard below the control panel.
The vent lets air circulate properly. Be careful not
to block the vent, or you could get poor baking/
roasting results.

OFF
HI
OFF

HI
8

8
2

TIMER
3
6

BROIL
START ?
T
PREHEA
CLEAN

HI
LO
8

O
OVEN
LEANING

CLOCK
7

HI
3
6

BAKE

SELF-C

DOOR LOCKED

OFF
LO

BAKE

OFF

CUSTOM
BROIL

AUTO
CLEAN

TEMP/
TIME

START
ENTER

TIMER
• • CANCEL

3
PUSH

TO TURN

6
4

OFF
CANCEL

5 SEC

2
7

PUSH TO

TURN

3
6
4

ACE

HOT

SURF

Oven vent

Coil element model
Hot air and moisture escape from the oven through
a vent under the left rear coil element. You can cook
on this coil element or keep food warm on it while
the oven is on. The vent is needed for air circulation.
Do not block the vent by using extra large pans
or covers. You will get poor baking/roasting results.
NOTE: Never leave plastic utensils over the vent.
They could melt.

Oven vent

USING YOUR RANGE

THE ANTI-TIP BRACKET
The range will not tip during normal use. However, the range can tip if you apply too much force or weight
to the open door without the anti-tip bracket fastened down properly.

Range Foot

Making sure the anti-tip bracket is installed:
• Slide range forward.
• Look for the anti-tip bracket securely attached to floor.
• Slide range back so rear range foot is under anti-tip bracket.

USING YOUR RANGE

THE STORAGE DRAWER
Use the storage drawer to store cookware. You can
remove the drawer to make it easier to clean under
the range. Be careful when handling the drawer.

Removing the storage drawer:
1. Empty the drawer before you remove it. Pull the
drawer straight out to the first stop. (The stops
are small, round objects formed in the slide rail.
They keep the drawer from sliding all the way
out.) Then lift the front of the drawer and pull it
out to the second stop.
2. Lift the back of the drawer slightly and slide it all
the way out.

Replacing the storage drawer:
1. Fit the ends of the drawer slide rails into the
drawer guides on both sides of the opening.
Also, be sure the lower guide is fitted onto the
lower slide rail.
2. Lift the front of the drawer and push it in until the
metal stops on the drawer slide rails clear the
drawer guides. Then slide the drawer closed.

Lower slide rail
(inside drawer
Upper drawer
opening)
guides
(on inside walls)

Drawer
slide rail
Lower
drawer guide

USING THE SELF-CLEANING CYCLE

The Self-Cleaning cycle saves you from the toil and mess that often come with hand-cleaning the
inside of the oven. Like the other functions of your range, you run the Self-Cleaning cycle with the
easy-to-use controls. Please review the instructions in this section to keep your oven spotless.

wWARNING
Burn Hazard
Do not touch the oven during the Self-Cleaning cycle.
Keep children away from oven during Self-Cleaning cycle.
Do not use commercial oven cleaners in your oven.
Failure to follow these instructions can result in burns, or illness from inhaling
dangerous fumes.

BEFORE YOU START
Before you start the Self-Cleaning cycle, make
sure you:
• Hand-clean the areas shown. They do not get hot
enough during the Self-Cleaning cycle for soil to
burn away. Use hot water and detergent or a
soapy, steel-wool pad for cleaning.
NOTE: DO NOT clean, move, or bend the gasket.
You may get poor cleaning, baking, and roasting.
• Remove the broiler pan and grid and any pots
and pans being stored in the oven.
• Wipe out any loose soil or grease. This will help
reduce smoke during the Self-Cleaning cycle.
• Wipe up food spills containing sugar as soon as
possible after the oven cools down. When sugar
is heated to a high temperature in the SelfCleaning cycle, the high temperature can cause
the sugar to burn and react with the porcelain.
This can cause staining and etching or pitting.
• Remove the oven racks from the oven if you want
them to remain shiny. You can clean the oven
racks in the Self-Cleaning cycle, but they will
become harder to slide. (See the “Cleaning chart”
in the “Caring for Your Range” section.) If you
clean the racks in the Self-Cleaning cycle, place
them on the 2nd and 4th rack guides. (The guides
are counted from bottom to top.)
• Heat and odors are normal during the SelfCleaning cycle. Keep the kitchen well ventilated
by opening a window or by turning on a vent
hood or other kitchen vent during the cycle.

DO NOT
hand-clean
gasket
Hand-clean
frame

Hand-clean
door around
edge

TIPS:
• Do not block the vent during the Self-Cleaning
cycle. Air must move freely for best cleaning results.
• Do not leave plastic utensils on the cooktop. They
may melt.
• Do not leave any foil in the oven during the
Self-Cleaning cycle. Foil could burn or melt
and damage the oven surface.
• The oven light will not work during the
Self-Cleaning cycle.

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS
1. Press the auto clean pad.
The clean indicator light will light up.
This will automatically set a 31⁄ 2-hour
Self-Cleaning cycle.

PRESS

YOU SEE

AUTO
CLEAN

NOTE: There will be a 30-minute cool-down
1⁄2 hour before the cycle is over.

2. Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 31⁄2 hours, use the hour and minute
pads to set the cleaning time you want. Press
the “up” (s) or “down” (t) pad(s) until a time
between 21⁄2-41⁄2 hours shows on the display.
• Use 21⁄2 hours for light soil.
• Use 31⁄2-41⁄2 hours for average to heavy soil.

3. Start the oven.
NOTE: The on and heat indicator lights will
light up.

PRESS

YOU SEE

TEMP
TIME

(example for 4 hours,
30 minutes)

PRESS

YOU SEE

START
ENTER
5 SEC

4. After Self-Cleaning cycle starts:
The door locked indicator light will light up when
the oven door locks.
NOTE: If you open the door before starting the
Self-Cleaning cycle, “door” will show on the
display. If you do not close the door within
5 minutes, the cycle will be canceled.

5. After Self-Cleaning cycle ends and the oven

YOU SEE

reaches normal baking/roasting temperatures:
The clean, door locked, and on indicator lights
will go out.
Press the off/cancel pad to clear the display.

PRESS
OFF
CANCEL

continued on next page

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS (CONT.)
6. After the oven cools to room temperature, wipe
off any residue or ash with a damp cloth or
sponge.
If needed, touch up spots with a mild abrasive
cleanser or cleaning sponge.

To stop the self-cleaning cycle at
any time:
If the oven temperature is above normal broiling
temperatures, the Self-Cleaning cycle will start a
30-minute cool down. The clean and door locked
indicator lights will stay on.

PRESS

YOU SEE

OFF
CANCEL

Self-cleaning tips

• Keep the kitchen well ventilated during

the Self-Cleaning cycle to help get rid of
heat, odors, and smoke.
• Clean the oven before it gets heavily
soiled. Cleaning a very soiled oven takes
longer and could cause an increased
amount of smoke.

HOW THE CYCLE WORKS
875°F ( 468°C )
CLEANING CYCLE

Temperature

The Self-Cleaning cycle uses very high heat to burn
away soil and grease. During the cycle, the oven
gets much hotter than it does for normal baking or
broiling. This high heat breaks up the soil or grease
and burns it away.
Your oven is automatically preset for a 31⁄ 2-hour
Self-Cleaning cycle.
The graph at the right shows you what happens
in a 31⁄2-hour Self-Cleaning cycle. Notice that the
heating stops 1⁄ 2 hour before the 3 1⁄ 2-hour setting
is up.

OVEN SHUT OFF
( normal broiling temperature )
DOOR UNLOCKS

DOOR LOCKS

START

Time In Hours

STOP

CARING FOR YOUR RANGE

Your range is designed so you can care for it easily. You can do most cleaning with items found
around your home. Cleaning your range whenever spills or soiling occurs will help to keep it
looking and working like new.

wWARNING
Explosion Hazard
Do not store flammable materials such as gasoline near this appliance.
Doing so can result in death, explosion, or fire.

CLEANING CHART

Use this chart to get specific information on cleaning your range. Before cleaning, always make sure all
controls are off and the range is cool.
PART

HOW TO CLEAN

Control knobs

1. Turn the knobs off and pull them straight away from the control panel.
2. Wash the knobs with a sponge and warm, soapy water. Rinse and dry
them well. Do not soak them. Do not use steel wool or gritty cleansers,
which can damage the finish of the knobs.
3. Replace the knobs. Make sure all knobs are turned off.

Control panel

• Wash the panel with a sponge and warm, soapy water. Wipe the panel with
clean water and dry it well. Do not use steel wool or gritty cleansers,
which can damage the finish.
OR
• Wash the panel with a paper towel and spray glass cleaner. Do not spray
the cleaner directly on the panel. Apply the cleaner to the paper towel.

Exterior surfaces
(other than ceramic
glass cooktop and
control panel)

• Wash the surface with a sponge and warm, soapy water or paper towel and

Coil elements
(Model RF375PXE)

• You do not have to clean open coil elements because spatters or spills will

Chrome reflector
bowls
(Model RF375PXE)

• Wash the reflector bowls with warm, soapy water and a nonabrasive, plastic

spray glass cleaner. Wipe with clean water and dry thoroughly. Use a
nonabrasive, plastic scrubbing pad on heavily soiled areas.
• Do not use steel wool, abrasives, or harsh cleansers. They may damage
the finish.
• If you use soap or detergent solutions, wipe thoroughly to prevent filmy
residue.
NOTE: Do not let foods containing acids (such as vinegar, tomato, or lemon
juice) remain on the surface. Acids may remove the glossy finish. Also wipe
up milk or egg spills when the cooktop is cool. Be careful when cleaning
around the model and serial number plate; too much scrubbing could
remove the numbers.
burn off.
• Do not immerse the coil elements in water.

scrubbing pad. Rinse and dry them well.
• Clean the reflector bowls often.
• Do not use gritty or harsh cleansers.
• Do not clean the bowls in the Self-Cleaning oven.

continued on next page
29

CARING FOR YOUR RANGE

CLEANING CHART (CONT.)
PART

HOW TO CLEAN

Porcelain-enamel
reflector bowls
(Model RF375PXE)

• Wipe off excess spills.
• Wash with a nonabrasive, plastic scrubbing pad and warm, soapy water.

Ceramic glass
cooktop
(Model RF376PXE)

• See the “Cleaning the ceramic glass cooktop” section.

Broiler pan
and grid

• Wash the pan and grid with a steel-wool pad and warm, soapy water. Rinse

Oven racks

• Wash with a steel-wool pad and warm, soapy water. Rinse and dry well.

Rinse and dry well.
OR
• Place the bowls upside down on the oven racks in the oven during the
Self-Cleaning cycle.

and dry well.
• Do not clean in the Self-Cleaning cycle. (See “Before you start” in the “Using
the Self-Cleaning Cycle” section.)
OR
• Wash the pan and grid in a dishwasher.
OR
• Leave the racks in the oven during the Self-Cleaning cycle.
NOTE: If you leave your racks in the oven during the Self-Cleaning cycle, they
will lose their original color and become harder to slide. If you need to, apply a
small amount of vegetable oil to the side rungs to make the racks easier to slide.

Oven door glass

• Wash with a paper towel and spray glass cleaner or a nonabrasive plastic

scrubbing pad and warm, soapy water. Wipe with clean water and dry well.
• Follow the directions that come with the cleaner.
Oven cavity

• Wipe up food spills containing sugar as soon as possible after the oven cools

down. (See “Before you start” in the “Using the Self-Cleaning Cycle” section.)
• See the “Using the Self-Cleaning Cycle” section.

CARING FOR YOUR RANGE

COIL ELEMENTS AND REFLECTOR BOWLS (MODEL RF375PXE)
Removing
1. Make sure all coil elements are off and

OFF

cool before removing coil elements and
reflector bowls.
BAKE

2. Push in the edge of the coil element, opposite
the receptacle. Then lift it just enough to clear
the reflector bowl.

3. Pull the coil element straight away from
the receptacle.

4. Lift out the reflector bowl. See the “Cleaning chart”
earlier in this section for cleaning instructions.

CARING FOR YOUR RANGE

COIL ELEMENTS AND REFLECTOR BOWLS (MODEL RF375PXE) (CONT.)
Replacing
1. Make sure all coil elements are off and cool

OFF

before replacing coil elements and reflector
bowls.
BAKE

2. Line up openings in the reflector bowl with the
coil element receptacle.

3. Hold the coil element as level as possible with
the terminal just started into the receptacle. Push
the coil element terminal into the receptacle.

4. When the terminal is pushed into the receptacle
as far as it will go, push down the edge of the
coil element opposite the receptacle.

CARING FOR YOUR RANGE

COIL ELEMENTS AND REFLECTOR BOWLS (MODEL RF375PXE) (CONT.)
NOTE: Reflector bowls reflect heat back to the
cookware on the coil elements. They also help
catch spills. When they are kept clean, they
reflect heat better and look new longer.
If a reflector bowl changes color, some of your
cookware may not be flat enough, or some may be

too large for the coil element. In either case, some
of the heat that’s meant to go into or around cookware goes down and heats the reflector bowl. This
extra heat can cause it to change color.

LIFT-UP COOKTOP (MODEL RF375PXE)
NOTE: Do not drop the cooktop. Damage could
result to the porcelain and the cooktop frame.

1. Lift the front of the cooktop at both front corners
until the support rods lock into place.
2. Wipe the surface under the cooktop with warm,
soapy water and a sponge. Use a soapy steelwool pad on heavily soiled areas.
3. To lower the cooktop, lift the cooktop from both
sides while pressing the support rods back to
unlock them. Lower the cooktop into place.

CARING FOR YOUR RANGE

CLEANING THE CERAMIC GLASS COOKTOP (MODEL RF376PXE)
Your cooktop is designed for easy care. However,
you need to maintain your ceramic glass cooktop
differently than you would standard electric opencoil elements. Foods spilled directly on the cooktop
will not burn off as on open-coil elements. Because
of this, you should keep the surface dust free and
soil free before heating.
Your cooktop has been prepolished at the factory
for improved protection
and easier cleaning.
The Cooktop Polishing Creme included
with your range,
paper towels or a
sponge, and a singleedge razor blade in a
holder (see next page
for ordering information) are all you need
to clean your cooktop. For proper cleaning methods, please review “Cleaning tips” in the next
column and on the next page. Follow them each
time you use your cooktop. This will ensure you get
the best performance out of your cooktop, as well
as preserve that uniquely elegant look.
To avoid damaging the cooktop, follow these
instructions:
• Remove sugar spills and soils from the cooktop
while the surface is still warm to avoid pitting on
the surface.
• Marks from sliding metal pans on the cooktop are
difficult to remove completely. Use cooktop
polishing creme to clean the area. Several applications may be necessary.
• Do not use steel wool, plastic cleaning pads,
gritty powdered cleansers, chlorine bleach, rust
remover, ammonia, or glass cleaning products
with ammonia. These products could damage the
cooktop surface.

Cleaning tips
What to use:
• Cooktop Polishing Creme included with your
range with a paper
towel or clean, damp
sponge – This creme
has been developed
especially for cleaning
and protecting your
cooktop. When using
the creme, follow the
instructions on the
container.

• Razor scraper in a holder – Use this scraper to

remove cooked-on soils
from your ceramic glass
cooktop. To avoid
scratches, keep the razor
blade as flat against the
cooktop as possible.
Store razor blades out
of reach of children.

CARING FOR YOUR RANGE

CLEANING THE CERAMIC GLASS COOKTOP (MODEL RF376PXE) (CONT.)
Steps to follow:
1. You can wipe off most spills easily using a paper
towel or clean, damp sponge as soon as the Hot
Surface Indicator Light goes off.
2. For stubborn spills, rub the Cooktop Polishing
Creme into cooked-on soil using a paper towel.
If some soil remains, leave some creme on the
spot(s) and follow Step 3.
3. Carefully scrape spots with the razor scraper.
4. Finish by polishing the entire cooktop with
Cooktop Polishing Creme and a paper towel.
To order the Cooktop Polishing Creme (Part No.
3191048) or a razor scraper (Part No. 3183488),
call 1-800-253-1301. You will hear a recording.
Follow the steps to place an order.

How to keep your cooktop looking like new:
IF THERE ARE

WHAT TO DO

Sugary spills
and soils (such
as jellies and
candy syrups)

To prevent pitting on the
cooktop, wipe up with a
paper towel or clean, damp
sponge while the ceramic
glass surface is still
warm. Remove spills as
soon as possible after
they occur.

Dark streaks,
specks, and
discoloration

Use the Cooktop Polishing
Creme or a nonabrasive
cleanser with a damp paper
towel or sponge.

Metal marks
(from copper
and aluminum
pans)

Use the Cooktop Polishing
Creme with a damp paper
towel or sponge before
heating the cooktop again.
If heated before cleaning,
metal marks may not
come off.

Tiny scratches
or abrasions

Scratches and abrasions
do not affect cooking. After
many cleanings, they will
become less visible. To
prevent scratches and
abrasions, use the Cooktop
Polishing Creme regularly.

NOTE: Always wipe your cooktop with clean water
and dry it well after using the cleanser to prevent
streaking or staining.

CARING FOR YOUR RANGE

REMOVING THE OVEN DOOR
For normal use of your range, you do not need to
remove the door. However, if you have to remove
the door follow the instructions in this section.
NOTE: If the door removal pins included in the
Anti-Tip Bracket Package are not available, nails or
screws may be used. Be careful that the length of
the nail or screw does not damage the oven by
chipping or scratching the porcelain surface.

To remove:
1. Open the door about halfway. Insert door
removal pins into both hinge hangers. Do not
remove them while the door is removed from
the range.
2. Close the door as far as the door removal pins
will let you.

Insert door removal
pin here

Range

Oven door

Hinge
hanger

3. Rotate the door toward the range. Lift up the
door until it stops. Do not use the door handle to
lift the door. Rotate the door toward the floor and
pull it toward you.

Rotate

Range

Lift up
Oven door
36

CARING FOR YOUR RANGE

REMOVING THE OVEN DOOR (CONT.)
To replace:
NOTE: The door removal pins you inserted must still
be in both sides of the door.

1. Grasp the door on the sides with your fingers on
the front of the door and your thumbs on the
inside surface.

2. Rest the hinge hanger so that it is flat (at the
bottom of the hinge hanger on the bottom of the
front frame slot).
3. Position the door with the hinge hanger slots
almost parallel to the front frame.
4. Push up and in until the hinge hanger slots
become fastened to the range. Lower the door
and rotate it slightly from the front to the back
until the slots are fully fastened. The hinge
hanger will be close to the bottom of the front
frame slot.
5. Pull door open about halfway and remove the
door removal pins. Save door removal pins for
future use.
6. Close the door.

Remove door
removal pin

Oven door

Range
Hinge
hanger
Up

Hinge
hanger
flat
In
Front frame
slot bottom

CARING FOR YOUR RANGE

THE OVEN LIGHT
The oven light will come on when you open the
oven door.

To turn the light on or off when the oven door
is closed:
• Push the oven light switch on the backguard.

To replace the oven light:
1. Unplug range or disconnect power.
2. Remove the glass bulb cover in the back of the

4. Replace the light bulb cover by turning it clockwise.

oven by turning it
counterclockwise.

5. Plug in range or reconnect power.
3. Remove the light bulb from its socket. Replace
the bulb with a 40-watt appliance bulb.

NOTE: The oven light will not work during the
Self-Cleaning cycle.

TROUBLESHOOTING

Most cooking problems often are caused by little things you can find and fix without tools of any
kind. Check the lists below and on the next page before calling for assistance or service. If you still
need help, see “Requesting Assistance or Service” on page 41.

RANGE DOES NOT WORK
PROBLEM

CAUSE

Nothing works

• The range is not plugged into a live outlet with the proper voltage.

(See Installation Instructions.)
• You have blown a household fuse or tripped a circuit breaker.
• The control knob is not set correctly. Push in the control knobs before
turning them.
The oven does not work

• You have not set the electronic control correctly. Refer to the proper
instructions.

The surface cooking
areas will not work

• You have blown a household fuse or tripped a circuit breaker.
• The coil elements are not plugged in all the way (Model RF375PXE.)

(See “Replacing” on page 32.)
• You have not set the control knobs correctly. Push the control knobs in
before turning them to a setting.

WHEN SELF-CLEANING YOUR OVEN
PROBLEM

CAUSE

The Self-Cleaning cycle
will not work

• You did not press the start/enter pad.
• The door is not closed all the way.

TROUBLESHOOTING

COOKING RESULTS
PROBLEM

CAUSE

Cooking results are
not what you expected

• The oven temperature seems too low or too high. See “Adjusting the oven
temperature control” on page 19 to adjust the oven temperature.
• You did not preheat the oven before baking (if called for in the recipe).
• You are using a pan that is not the correct type or size. Refer to a reliable
cookbook or recipe for the recommended pan type and size.
• There is not enough air space around the pan when baking. Allow 11⁄2 to
2 inches of air space on all sides of the pan.
• The cookware is too large or too small for the surface cooking area being
used. The pan should be the same size or slightly larger than the surface
cooking area being used.
• The range is not level. (See the Installation Instructions.)

DISPLAY MESSAGES
PROBLEM

CAUSE

The display is showing
“PF”

• There has been a power failure. Press the off/cancel pad to clear the display.

“F” followed by a number
shows on the display

• Press the off/cancel pad to clear the display. If an “F” code appears again,

The indicator light(s)
is flashing

• The function(s) indicated may not be working. Refer to the section in this Use

call for service. (See “If You Need Assistance or Service” on page 41.)

and Care Guide discussing the function. If the indicator light(s) keeps flashing,
call for service. (See “If You Need Assistance or Service” on page 41.)

If none of these items are causing your problem, see “Requesting Assistance or Service” on page 41.

REQUESTING ASSISTANCE OR SERVICE

To avoid unnecessary service calls, please check the “Troubleshooting” section. It may save you
the cost of a service call. If you still need help, follow the instructions below.

IF YOU NEED ASSISTANCE OR SERVICE
Call the Whirlpool Consumer Assistance
Center toll free at 1-800-253-1301.
Our consultants are available to
assist you.
When calling:
Please know the purchase date, and
the complete model and serial number of your
appliance (see the “A Note to You” section).
This information will help us better respond to
your request.
Our consultants provide assistance with:
• Features and specifications on our full line
of appliances
• Installation information
• Use and maintenance procedures

• Accessory and repair parts sales
• Do-it-yourself repair help
• Specialized customer assistance (Spanish speak-

ing, hearing impaired, limited vision, etc.)
• Referrals to local dealers, service companies, and
repair parts distributors
Whirlpool service technicians are trained to fulfill
the product warranty and provide after-warranty
service, anywhere in the United States.
To locate the authorized Whirlpool service company
in your area, you can also look in your telephone
directory Yellow Pages.

IF YOU NEED REPLACEMENT PARTS
If you need to order replacement parts, we recommend that you only use FSP® factory authorized
parts. FSP replacement parts will fit right and work
right, because they are made to the same exacting
specifications used to build every new
WHIRLPOOL® appliance.

To locate FSP replacement parts in your area, call
our Consumer Assistance Center telephone number
or your nearest authorized service center.

FOR FURTHER ASSISTANCE
If you need further assistance, you can write to
Whirlpool with any questions or concerns at:
Whirlpool Brand Home Appliances
Consumer Assistance Center
c/o Correspondence Dept.
2000 North M-63
Benton Harbor, MI 49022-2692

Please include a daytime phone number in your
correspondence.

NOTES

INDEX

This index is alphabetical. It contains all the topics included in this manual, along with the page(s)
on which you can find each topic.
TOPIC

PAGE

TOPIC

PAGE

AIR CIRCULATION ..................................................... 12

LIFT-UP COOKTOP ................................................... 33

ANTI-TIP BRACKET ................................................... 24

MODEL AND SERIAL NUMBER .................................. 2

ASSISTANCE ............................................................. 41

OVEN DOOR .............................................................. 36

BAKING
Aluminum foil .......................................................... 12
Pans ................................................................. 11, 12
Racks ...................................................................... 11
Setting cycle ........................................................... 16
Tips ......................................................................... 18

OVEN LIGHT .............................................................. 38

BROILING
Grid ......................................................................... 22
Pan ................................................................... 20, 22
Rack positions ........................................................ 22
Setting cycle ........................................................... 21
Tips ......................................................................... 22

PANS ....................................................................11, 12

CLEANING
Broiler pan and grid ................................................ 30
Ceramic glass cooktop .................................... 34, 35
Coil elements ....................................................29, 31
Control knobs ......................................................... 29
Control panel .......................................................... 29
Exterior surfaces .................................................... 29
Oven cavity ............................................................. 30
Oven door glass ..................................................... 30
Oven racks ............................................................. 30
Reflector bowls ................................................ 29-33
Self-cleaning cycle ................................................. 26
CONTROL PANEL
Coil element markers ............................................... 6
Control knobs ........................................................... 8
Hot surface indicator lights .................................... 10
Surface heating indicator light ............................. 6, 7
Surface cooking area markers ................................. 7
COOKWARE
Canning .................................................................... 9
Tips ..................................................................... 9, 10
ELECTRONIC OVEN CONTROL
Canceling ............................................................... 15
Clock ...................................................................... 14
Control lock ............................................................ 13
Display .................................................................... 13
Indicator lights ........................................................ 13
Minute timer ........................................................... 14
Starting ................................................................... 15
FEATURES ............................................................... 6, 7

OVEN TEMPERATURE
Adjusting ................................................................ 19
Setting .............................................................. 16, 21
OVEN VENT ............................................................... 23

PARTS ...................................................................... 6, 7
RACKS ....................................................................... 11
ROASTING
Pans ................................................................. 11, 12
Racks ...................................................................... 11
Setting cycle ........................................................... 16
Tips ......................................................................... 16
SAFETY .................................................................... 3-5
SELF-CLEANING CYCLE
Before you start ...................................................... 26
How the cycle works .............................................. 28
Setting the controls ................................................ 27
Tips ......................................................................... 28
SERVICE .................................................................... 41
STORAGE DRAWER .................................................. 25
SURFACE COOKING AREAS
Ceramic glass cooktop .......................................... 10
Coil element markers ............................................... 6
Control knobs ..................................................... 8, 29
Control setting guide ................................................ 8
Hot surface indicator lights .................................... 10
Surface heating indicator light ............................. 6, 7
Surface cooking area markers ................................. 7
Tips ........................................................................... 8
TIPS
Bakeware ................................................................ 11
Broiling ................................................................... 22
Cookware ........................................................... 9, 10
Saving energy ..................................................... 8, 18
Self-cleaning ........................................................... 28
TROUBLESHOOTING .......................................... 39, 40
WARRANTY ............................................................... 44

WARRANTY

WHIRLPOOL ELECTRIC RANGE
®

LENGTH OF WARRANTY

WHIRLPOOL WILL PAY FOR

FULL ONE-YEAR
WARRANTY
FROM DATE OF PURCHASE

FSP® replacement parts and repair labor to correct defects in materials
or workmanship. Service must be provided by an authorized Whirlpool
service company.

FULL FIVE-YEAR
WARRANTY
FROM DATE OF PURCHASE

Ceramic glass cooktop only: FSP replacement parts and repair labor for
CLEANTOP® ceramic glass cooktop.
Whirlpool warrants that:
–The ceramic glass cooktop will not discolor
–The ceramic glass cooktop pattern will not wear off
–The rubber seal between the ceramic glass cooktop and porcelain edge will
not crack
–The ceramic glass cooktop will not crack due to thermal shock
–The surface unit elements will not burn out

WHIRLPOOL WILL NOT PAY FOR
A. Service calls to:
1. Correct the installation of your range.
2. Instruct you how to use your range.
3. Replace house fuses or correct house wiring.
4. Replace owner-accessible light bulbs.
B. Repairs when your range is used in other than normal, single-family household use.
C. Pickup and delivery. Your range is designed to be repaired in the home.
D. Damage to your range caused by accident, misuse, fire, flood, acts of God, or use of products not
approved by Whirlpool.
E. Repairs to CLEANTOP ceramic glass cooktop if it has not been cared for as recommended in this
Use and Care Guide.
F. Repairs to parts or systems caused by unauthorized modifications made to the appliance.
8/96

WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or
limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Outside the United States, a different warranty may apply. For details, please contact your authorized
Whirlpool dealer.
If you need service, first see the “Troubleshooting” section of this book. After checking “Troubleshooting,”
additional help can be found by checking the “Requesting Assistance or Service” section, or by calling the
Whirlpool Consumer Assistance Center telephone number, 1-800-253-1301, from anywhere in the U.S.A.

® Registered Trademark/TM Trademark of Whirlpool, U.S.A.

7/97
Printed in U.S.A.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Creator                         : Acrobat Capture Server 2.01
Create Date                     : Tuesday, December 01, 1998 3:07:06 PM
Title                           : Unknown
Author                          : Unknown
Producer                        : Acrobat PDFWriter 3.02 for Windows
Subject                         : 
Modify Date                     : 2002:09:18 16:51:23
Page Count                      : 44
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools

Whirlpool Rf375Pxe Users Manual Unknown

Navigation menu

Versions of this User Manual:

Views

Navigation