Whirlpool Oven Rbd306 Users Manual

WHIRLPOOL Built In Oven, Electric Manual L0405103 WHIRLPOOL Built In Oven, Electric Owner's Manual, WHIRLPOOL Built In Oven, Electric installation guides

GSC278 YGSC278 L0405103

RBD306 to the manual d4cd57f6-670c-4b3c-831d-b04dfc3fd694

2015-01-23

: Whirlpool Whirlpool-Whirlpool-Oven-Rbd306-Users-Manual-303827 whirlpool-whirlpool-oven-rbd306-users-manual-303827 whirlpool pdf

Open the PDF directly: View PDF PDF.
Page Count: 21

BUILT.INELECTRIC
OVEN
Use &CareGuide
In the U.S.A, for questions about features, operation,
performance, parts, accessories or service,
call: 1-800-253-t30t.
In Canada, for product-related questions call: 1-800-461-568t,
for parts, accessories, instal]ation and service call:
1-800-807-6777.
or visit our website at...
W_',whidpool.com or ww'w.whirlpool.com/cartada
Table of Contents ............................................ 2
MODELS RBS245 RBD245 YRBS275
RBS275 RBD275 YRBS305
RBS305 RBD305
RBD306
4450568B
TABLEOFCONTENTS
OVEN SAFETY ............................................................................ 3
PARTS AND FEATURES ............................................................ 5
ELECTRONIC OVEN CONTROL ................................................ 6
Display.......................................................................................... 6
Start/Enter .................................................................................... 6
Upper Off, Lower Off or Off/Cancel............................................. 6
Clock ............................................................................................ 6
Tones ............................................................................................ 6
Fahrenheit and Celsius ................................................................. 7
Timer ............................................................................................. 7
Control Lock ................................................................................. 7
Oven Temperature Control .......................................................... 7
OVEN USE................................................................................... 8
Aluminum Foil............................................................................... 8
PositioningRacks and Bakeware ................................................ 8
Bakeware...................................................................................... 8
Meat Thermometer....................................................................... 8
OvenVent..................................................................................... 9
Baking and Roasting.................................................................... 9
Broilingand Custom Broiling....................................................... 9
Timed Cooking........................................................................... 10
OVEN CARE .............................................................................. 11
Self-CleaningCycle.................................................................... 11
Cleaning ...................................................................................... 12
Oven Lights ................................................................................ 13
Oven Door .................................................................................. 13
TROUBLESHOOTING ............................................................... 14
ASSISTANCE OR SERVICE ..................................................... 15
In the U.S.A................................................................................ 15
In Canada ................................................................................... 15
WARRANTY .................................................................................. 16
2
OVENSAFETY
Your safety and the safety of others are very important.
We have providedmany importantsafety messages in this manualand on your appliance.Always read and obey all
safety messages.
I_ hisis the safetyalert symbol,
This symbolalerts youto potentialhazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING," These words mean:
You can be killed or seriously injured if you don't
immediatelv follow instructions,
You can be killed or seriously injured if you don't
follow instructions,
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical
shock, injuryto persons, or damage when using the
oven, follow basic precautions,includingthe following:
•Proper Installation- Be sure the oven is properly
installed and grounded by a qualified technician.
•Never Use the Oven for Warming or Heating the
Room.
• Do Not Leave Children Alone -Children should not
be left alone or unattended in area where oven is in
use. They should never be allowed to sit or stand
on any part of the oven.
• Wear Proper Apparel - Loose-fitting or hanging
garments should never be worn while using the oven.
• User Servicing - Do not repair or replace any part of
the oven unless specifically recommended in the
manual. All other servicing should be referred to a
qualified technician.
• Storage in Oven - Flammable materials should not
be stored in an oven.
•Do Not Use Water on Grease Fires -Smother fire or
flame or use dry chemical or foam-type extinguisher.
•Use Only Dry Potholders- Moistor damp potholders
on hot surfaces may result in bumsfrom steam. Do
not let potholdertouch hot heatingelements. Do not
use a towel or other bulky cloth.
• Use Care When Opening Door- Let hot air or steam
escape before removing or replacing food.
• Do Not Heat Unopened Food Containers - Build-up
of pressure may cause container to burst and result
in injury.
• Keep Oven Vent Ducts Unobstructed.
• Placement of Oven Racks - Always place oven racks
in desired location while oven is cool. If rack must be
moved while oven is hot, do not let potholder contact
hot heating element in oven.
• DO NOT TOUCH HEATING ELEMENTS OR
INTERIOR SURFACES OF OVEN - Heating
elements may be hot even though they are dark in
color. Interior surfaces of an oven become hot
enough to cause burns. During and after use, do
not touch, or let clothing or other flammable materials
contact heating elements or interior surfaces of oven
until they have had sufficient time to cool. Other
surfaces of the oven may become hot enough to
cause burns - among these surfaces are oven vent
openings and surfaces near these openings, oven
doors, and windows of oven doors.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
For self-cleaning ovens:
•Do Not Clean Door Gasket - The door gasket is
essential for a good seal. Care should be taken not
to rub, damage, or move the gasket.
•Do Not Use Oven Cleaners - No commercialoven
cleaner or oven liner protectivecoating of any kind
shouldbe used in or around any part ofthe oven.
• Clean Only Parts Listed in Manual.
•Before Self-Cleaning the Oven - Remove broilerpan
and other utensils.
SAVE THESEINSTRUCTIONS
The California Safe Drinking Water and Toxic EnforcementAct requires the Governor of California to publishalist
of substances known to the State of California to cause cancer, birth defects, or other reproductive harm, and
requires businesses to warn of potential exposure to such substances.
WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or
other reproductive harm.
This appliance can cause low-level exposure to some of the substances listed, including benzene, formaldehyde,
carbon monoxide, and toluene.
4
PARTSANDFEATURES
This manual covers different models. The oven you have purchased may have some or all of the items listed. The locations and
appearances of the features shown hers may not match your model.
J
. lllI
1. Electronic Oven Control
2. Oven Vent
3. Broil Element (not shown)
4. Bake Element
5. Oven Door Window
6. Lower Oven
7. Automatic Oven Light Switch
8. Oven Lock Latch
9. Model and Serial Number Plate
(on right mounting rail)
Parts and Features not shown
Oven Lights
Broiler Pan and Grid
ELECTRONICOVENCONTROL
1 2 3 4 5 6
l i i _ I i
7 8 9 10 11 12 13 14
1. Upper Oven Temperature Display
2. Electronic Display
3. Lower Oven Temperature Display
4. Timer
5. Clock
6. Oven Light
7. Oven Selector
8. Oven Settings
9. Temperature Setting
10. Timed Cooking
11. Hour
12. Minute
13. Start/Enter [Control Lock]
14. Off/Cancel
When power is first supplied to the appliance, everything on the
display will light up for 5 seconds. Then, the time of day and "PF"
will appear on the electronic oven display.
Any other time "PF" appears, a power failure occurred. To reset
the clock, press UPPER OFF or LOWER OFF on double oven
models. On single oven models, press OFF/CANCEL.
Electronic Display
When the oven(s)are in use, this display showsthe oven
temperature. On double oven models, this display willalso show
which oven is being set. The left cavitysymbol represents the
upper oven and the right cavity symbol represents the lower
oven.
If "Err" appears on the oven display, an invalid pad was pressed.
Press UPPER OFF or LOWER OFF and retry entry. On single oven
models, press OFF/CANCEL.
When the ovens are not in use, the display will show the time of
day.
Start/l ter
The START/ENTER pad begins any oven function except the
Timer. If not pressed within 5 seconds after pressing a pad,
"START?" will appear on the oven display as a reminder. If not
pressed within 5 minutes after pressing a pad, the oven display
will return to the time of day mode and the programmed function
will be cancelled.
Upper Lower Offer Oil]Cancel
The UPPER OFF, LOWER OFF and OFF/CANCEL pads stop their
respective oven functions except for the Clock, Timer and
Control Lock.
The cooling fan may continue to operate even after an oven
function has been cancelled, depending on the oven
temperature.
Clock
This is a 12 hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the ovens, Timer and Timed Cooking
are off.
1. Press CLOCK.
2. Press the HR or MIN "up" or "down" arrow pads to set the
time of day.
3. Press CLOCK or START/ENTER.
To remove the time of day from the display: Press and hold
CLOCK for 5seconds.
To return the time of day to the display: PressCLOCK. The
time should not have to be reset.
Tones
Tones are audible signals, indicating the following:
One tone
• Valid pad press
•Oven is preheated
• Function has been entered
Three tones
• Invalidpad press
Four tones
• End-of-cycle
•Reminder,repeating each minute after the end-of-cycle tones
All Tones
All of the above tones are preset on, but can be turned off.
To Turn Off/On: Press and hold STOP TIME for 5 seconds, and a
tone willsound. On double ovensonly, "Snd oFF" willappear on
the oven display for 3 seconds. Repeat to change back to "Snd
on".
Tone Volume
The volume is preset at high, but can be changed to low.
ToChange: Press and hold the DELAYSTART TiME pad for 5
seconds. A tone willsound and "Snd Lo" will appear on the oven
display for 3seconds. Repeat to change back to "Snd HI".
REMINDER TONES
The Timer and Timed Cooking reminder tones are preset on, but
can be turned off. Reminder tones do not include end-of-cycle
tones. If "All Tones" have been turned off, the reminder tones
cannot be independently turned on.
Timer
ToTurn Tones Off/On: Press and hold TIMER SET until a tone
sounds. Repeat to turn back on.
Timed Cooking
ToTurn Tones Off/On: Press and hold COOK TIME until a tone
sounds and the lower oven display returns to inactive mode
(blank). Repeat to turn back on.
Fahrenheitand Celsius
The temperature is preset at Fahrenheit, but can be changed to
Celsius.
To Change: Press and hold CUSTOM BROIL for 5 seconds. A
tone willsound and "C °" will appear on the lower oven display for
3 seconds. Repeat to change back to Fahrenheit.
When in Fahrenheit, "°F" follows the oven temperature.
When in Celsius, only "°" follows the oven temperature.
rifler
The Timer can be set in minutes and seconds or hours and
minutes and counts down the set time. The Timer does not start
or stop the oven.
ToSek
1. PressTIMER SET
Press again to switch between MIN/SEC and HR/MIN.
If no action is taken after one minute, the electronic oven
display will return to the time of day mode.
2. Press the HR or MIN "up" or "down" arrow pads to set length
of time.
3. Press TIMER SET or START/ENTER.
If not pressed within 5 seconds, the display will return to the
time of day mode and the programmed function will be
cancelled.
When the set time ends, if enabled, end-of-cycle tones will
sound, then reminder tones will sound every minute.
4. PressTIMER OFF anytime to cancel the Timer and/or stop
reminder tones.
*Remember, do not press the Off/Cancel pads because the
respective oven will turn off.
The time can be reset during the countdown by repeating the
above steps.
ControlLock
The Control Lock shuts down the control panel pads to prevent
unintended use of the ovens.
When the control is locked, only the CLOCK, TIMER SET and
TIMER OFF pads will function.
The Control Lock is preset unlocked, but can be locked.
ToLock/Unlock Control: Before locking, make sure the ovens,
"Rmerand Timed Cooking are off. Press and hold START/ENTER
until3 tones sound and "LOC", apicture of alock and "START?"
willappear on the oven display, about 5 seconds. Repeat to
unlockand remove "LOC" from display.
OvenTemperatureControl
IMPORTANT: Do not use athermometer to measure oven
temperature because opening the oven door and element or
burner cycling may give incorrect readings.
The oven provides accurate temperatures; however, it may cook
faster orslower than your previousoven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheitor
Celsius.
Aminus sign means the oven will be cooler by the displayed
amount. No sign means the oven will be warmer by the displayed
amount. Use the following chart as a guide.
ADJUSTMENT OF COOKS FOOD
(ADJUSTMENT °C)
5° to 1O°F(3° to 6°C) ...a little more
15 ° to 20°F (9° to 12°C) ...moderately more
25 ° to 35°F (15 ° to 21°C) ...much more
-5 ° to -1O°F (-3 °to -6°C) ...a little less
-15 ° to -20°F (-9 ° to -12°C) ...moderately less
-25 ° to -35°F (-15 ° to -21 °C) ...much less
To Adjust Oven Temperature Calibration:
1. Pressand hold BAKE until the ovendisplay showsthe current
calibration, for example, "0° CA[.", if not yet adjusted or
about 5 seconds.
2. On double oven models only, press UPPER OVEN or LOWER
OVEN.
3. Press the TEMP "up" or "down" arrow pad to increase or
decrease the temperature in 5°F (3°C) amounts. The
adjustment can be set between 35°F (21°C) and -35°F
(-21°C).
4. Press START/ENTER.
OVENUSE
AhminumFoil
IMPORTANT: Do not linethe oven bottom with any type of foil,
liners or cookware because permanent damage will occur to the
oven bottom finish.
•Do not cover entire rack with foil because air must be able to
move freely for best cooking results.
• To catch spills, place foil on rack below dish. Make sure foil is
at least 1 in. (2.5 cm) larger than the dish and that it is turned
up at the edges.
PositioningRacks andBakeware
IMPORTANT: Never place food or bakeware directly on the oven
door or bottom.
RACKS
Position racks before turning the oven on. Do not move racks
with bakeware on them. Make sure racks are level. To move a
rack, pull it out to the stop position, raise the front edge, then lift
out. Use the following illustration and chart as aguide.
FOOD RACK POSITION
Frozen pies, large roasts, turkeys, 1 or 2
angel food cakes
Bundt cakes, most quick breads, 2
yeast breads, casseroles, meats
Cookies, biscuits, muffins, cakes, 2 or 3
non-frozen pies
BAKEWARE
To cook food evenly, hot air must be able to circulate. Allow 2 in.
(5 cm) of space around bakeware and oven walls. Use the
following chart as a guide.
NUMBEROF POSITION ON RACK
PAN(S)
1 Center of rack.
2Side by side or slightly staggered.
3 or 4 Opposite corners on each rack. Make sure
bakeware is not directly over another.
]_tkeware
The bakeware material affects cooking results. Follow
manufacturer's recommendations and use the bakeware size
recommended in the recipe. Use the following chart as a guide.
BAKEWARE/ RECOMMENDATIONS
RESULTS
Light colored •Use temperature and time
aluminum recommended in recipe.
•Light golden
crusts
• Even browning
Dark aluminum •
and other
bakeware with
dark, dull and/or •
non-stick finish •
•Brown, cdsp
crusts
May reduce baking temperatures
25°F (15°C).
Use suggested baking time.
For pies, breads and casseroles, use
temperature recommended in
recipe.
•Place rack in center of oven.
Insulated cookie
sheets or baking
pans
•Littleor no
bottom
browning
• Place inthe bottom third of oven.
•May need to increase baking time.
Stainless steel
•Light, golden
crusts
•Uneven
browning
• May need to increase baking time.
Stoneware
• Crisp crusts
• Follow manufacturer's instructions.
Ovenproof
glassware,
ceramic glass or
ceramic
•Brown, crisp
Crusts
• May reduce baking temperatures
25°F (15°C).
MeatThermometer
On models withouta temperature probe, always rely on a meat
thermometer to determine doneneas of meat and poultry. The
internaltemperature, not appearance, is what counts. A meat
thermometer is not supplied with this appliance.
• Insert the thermometer into the center of the thickest portion
of the meat or innerthigh or breast of poultry. The tip of the
thermometer should not touch fat, bone or gristle.
•After readingthe thermometer once, push it into the meat 1/2
in. (2 cm) more and read again. If the temperature drops,
cook the meat or poultry longer.
• Check pork and poultry in two orthree places.
OvenVent
1II
I1_
'II
3 *.
1. Upperoven
Oven vent
3. Lower oven
The oven vent should not be blocked or covered since it allows
the release of hot air and moisture from the oven. Doing so will
cause poor air cimulation, affecting cooking and cleaning results.
Never set plastics, paper or other itemsthat could melt or burn
near the oven vent.
Baking and Roasting
3. Press START/ENTER.
4.
A preheat time will count down and "PrE°" will appear on the
oven display if the actual oven temperature is under 170°F
(77°C).
When the actual oven temperature reaches 170°F (77°C), the
timer willcontinue countingdown.The temperature setting
can be changed anytime after pressingSTART/ENTER.
When an appropriate temperature is reached, if enabled, one
tone will sound.
Press UPPER OFF, LOWER OFF or OFF/CANCEL when
finished cooking.
Broiling andCustomBroiling
2
I. Broilelement
2. Bake element
ACCUBAKE® Temperature Management System
The ACCUBAKE system electronically regulates the oven heat
levels dudng preheat and bake to maintain a precise temperature
range for optimal cooking results. The bake and broil elements
cycle on and off in intervals. The bake element will glow red when
cycling on, the broil element will not. This feature is automatically
activated when the oven is in use.
If the oven door is opened dudng baking and roasting, the broil
element will turn off immediately and the bake element will turn
off in 2 minutes. They will come back on once the door is closed.
To Bake or Roast:
Before baking and roasting, position the racks according to the
"Positioning Racks and Bakeware" section. When roasting, it is
not necessary to wait for the oven to preheat before putting food
in, unless recommended in the recipe.
1. On double oven models only,press UPPER OVEN or LOWER
OVEN.
Close oven door. The display will show "door" and the
heating elements will not heat ifthe door is open when baking
and roasting.
2. Press BAKE.
Press the TEMP "up" or "down" arrow pad to enter a
temperature other than 350°F (177°C). The bake range can be
set between 170°F and 5gOlF (77°C and 260°C).
1. Broilelement
Broiling uses direct radiant heat from the broil element to cook
food. During broiling, the broil element cycles on and off in
intervals to maintain the oven temperature.
If the oven door is opened during broiling, the broil element will
turn off immediately and come back on once the door is closed.
•Use only the broiler pan and grid provided with the appliance.
It is designed to drain juices and help prevent spatter and
smoke.
• For proper draining, do not cover the grid with foil. The
bottom of the pan may be lined with aluminum foil for easier
cleaning.
• Trim excess fat to reduce spattering. Slit the remaining fat on
the edges to prevent curling.
•Pull out oven rack to stop position before turning or removing
food. Use tongs to turn food to avoid the loss of juices. Very
thin cuts of fish, poultry or meat may not need to be turned.
•After broiling, remove the pan from the oven when removing
the food. Drippings will bake on the pan if left in the heated
oven, making cleaning more difficult.
To Broil:
Before broilingor custom broiling,position the rack according to
the BroilingChart.
Positionfood on the grid in the broiler pan, then place it in the
center of the oven rack with the longest side parallelto the door.
It is not necessaryto preheat the oven before putting food in,
unless recommended inthe recipe.
Close the door.
1. On double oven models only,press UPPER OVEN or LOWER
OVEN.
2. Press CUSTOM BROIL.
3. Press START/ENTER.
The set oven temperature will appear on the oven display
until the oven is turned off.
4. Press UPPER OFE LOWER OFF or OFF/CANCEL when
finished cooking.
9
To Custom Broil:
Changing the temperature when custom broilingallows more
precise control when cooking.The lower the temperature, the
slower the cooking. Thicker cuts and unevenly shaped pieces of
meat, fish and poultry may cook better at lower broiling
temperatures.
1. On double oven models only, press UPPER OVEN or LOWER
OVEN.
2. Press CUSTOM BROIL.
3. Press the TEMP "up" or "down" arrow pad to enter a
temperature other than 500°F (260°C). The broilrange can be
set between 170°F and 500°F (77°C and 260°C).
4. Press START/ENTER.
The set oven temperature will appear on the oven display
until the oven is turned off.
5. Press UPPER OFF, LOWER OFF or OFF/CANCEL when
finished cooking.
Cooldng
Food Poisoning Hazard
Do not let food sit in oven more than one hour
before or after cooking,
Doing so can result in food poisoning or
sickness.
Timed Cooking allows the oven to be set to turn on at a cerEain
time of day, cook for a set lengthof time, and/or shut off
automatically.Delay start should not be used for food such as
breads and cakes because they may not bake properly.
BROILING CHART
For best results, place food 3 in. (7 cm) or more from the broil
element. Times are guidelines only and may need to be adjusted
for individualfoods and tastes. Recommended rack positionsare 2.
numbered from the bottom (1) to the top (5). For diagram, see the
"Positioning Racks and Bakeware" section.
COOK 3.
RACK TIME 4.
FOOD POSITION minutes
SIDE 1 SIDE 2 5.
Chicken
bone-in pieces 3 17-20 17-20
boneless breasts 4 11-16 11-16
Fish
Fillets V_-1/2in. 4 8-10 4-5
(.6-1.25 cm) thick 6.
Steaks 3A- 1 in. 4 16-18 8-9
(2-2.5 cm) thick
Frankfurters 4 5-7 3-4
*Ground meat patties
z_in. (2 cm) thick
well done 4 13-14 7-8 2,
Ham slice, precooked
I/2in. (1.25 cm) thick 4 8-10 4-5 3.
Lamb chops 4.
1 in. (2.5 cm) thick 4 14-17 8-9
5.
Pork chops 6.
1 in. (2.5 cm) thick 4 20-22 10-11
Steak 7.
1 in. (2.5 cm) thick
medium rare 4 14-15 7-8
medium 4 15-16 8-9
well done 4 18-19 9-10
*Place up to 12 patties, equally spaced, on broiler grid.
10
To Set a Cook-time:
1. On double oven models only,press UPPER OVEN or LOWER
OVEN.
Press BAKE.
Press the number pads to enter a temperature other than the
one displayed.
Press COOK TIME.
Press the HR and MIN "up" or "down" arrow pads to enter
the length of time to cook.
Press START/ENTER.
The start time and stop time countdown will appear on the
oven display.
When the stop time is reached, the oven willshut off
automatically and "End" will appear on the oven display.
If enabled, end-of-cycle tones will sound, then reminder
tones will sound every minute.
Press UPPER OFF,LOWER OFF or OFF/CANCEL or open the
oven door to clear the display and/or stop reminder tones.
To Set a Cook Time and Stop Time [Delay Start]:
Before setting, make sure the clock is set to the correct time of
day. See "Clock" section.
1. On double oven models only, press UPPER OVEN or LOWER
OVEN.
8,
Press BAKE.
Press the TEMP "up" or "down" arrow pad to enter a
temperature other than the one displayed.
Press COOK TIME.
Press the HR and MIN "up" or "down" arrow pads to enter
the length of time to cook.
PressDELAY STARTTIME
Pressthe HR end M[N "up" or "down" arrow pads to enter
the time of day to start.
PressSTART/ENTER.
The start time is automatically calculated and displayed.
"DELAY" and the stop time will also appear on the oven
display.
When the start time is reached, the oven willautomatically
turn on.
When the stop time is reached, the oven willshut off
automatically and "End" will appear on the oven display.
If enabled, end-of-cycle tones will sound, then reminder
tones will sound every minute.
PressUPPER OFF,LOWER OFF or OFF/CANCEL oropen the
oven door to clear the display and/or stop reminder tones.
OVF_2qC, LPJ
Self.CleaningCycle
Burn Hazard
Do not touch the oven during the
Self-Cleaning cycle.
Keep children away from oven during
Self-Cleaning cycle.
Do not use commercial oven cleaners in
your oven.
Failure to follow these instructions can result in
burns, or illness from inhaling dangerous fumes.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off duringthe Self-Cleaning cycle. Exposure to
the fumes may result in death to certain birds.Always move birds
to another closed and well ventilated room.
Self-clean the oven before it is heavily soiled. Heavy soilresults in
longer cleaning and more smoke.
Keep the kitchen well-ventilated duringthe Self-Cleaning cycle to
help get rid of heat, odors, and smoke.
Do not block the oven vent(s) dudng the Self-Cleaning cycle. Air
must be able to move freely. See "Oven Vent(s)" section.
Prepare Oven:
a Remove the broiler pan, gdd, cookware and bakeware and,
on some models, the temperature probe from the oven.
= Remove any foil from the oven because it may burn or melt,
damaging the oven.
Remove oven racks to keep them shiny and easy to slide. If
leaving in, place them on rack positions 2, 3 or 4. For
diagram, see "Positioning Racks and Bakeware". Racks will
discolor and become harder to slide. See "Cleaning" for more
information.
Hand clean inside door edge and the 1V2in. (3.8 cm) area
around the inside oven cavity frame, being careful not to
move or bend the gasket. This area does not get hot enough
during self-cleaning to remove soil. Do not let water, cleaner,
etc. enter slots on door frame. Use a damp cloth to clean this
area.
Wipe out any loose soil to reduce smoke and avoid damage.
At high temperatures, foods react with porcelain. Staining,
etching, pitting or faint white spots can result. This will not
affect cooking performance.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel inthe
oven may result in discoloring, lossof gloss, hairlinecracks and
popping sounds.
The Self-Cleaning cycle usesvery high temperatures, burningsoil
to a powdery ash.
The oven is preset for a 3 hour 30 minute clean cycle, but the
time can be changed. Suggested clean times are 2 hours30
minutes for light soil and between 3 hours 30 minutesto 4 hours
30 minutes for average to heavy soil.
Once the oven has completely cooled, remove ash with adamp
cloth.
The oven light will not work during the Self-Cleaning cycle.
On combination oven models, the upper oven will not work
during the Self-Cleaning cycle.
To Self-Clean:
Before self-cleaning, make surethe door is closed completely or
it will not lock and the cycle will not begin.
1. On double oven models only,press UPPER OVEN or LOWER
OVEN.
2. Press AUTO CLEAN.
3.
4,
Press the HR "up" or "down" arrow pad to set a clean time
other than 3 hour 30 minutes. The clean time can be set
between 2 hours 30 minutes and 4 hours 30 minutes.
Press START/ENTER.
The oven door will automatically lock. "DOOR LOCKED", the
start time and stop time will appear on the oven display. The
door will not unlock until the oven cools.
When the cycle is complete and the oven cools, "End" will
appear on the oven display and "DOOR LOCKED" will
disappear.
Press UPPER OFE LOWER OFF or OFF/CANCEL oropen the
oven door to clear the oven display.
To Delay Start Serf-Clean:
Beforedelay startingSelf-Clean, make surethe clock isset tothe
correct time of day. See "Clock" section. Also, make surethe
door is closed completely or it will not lock and the cycle will not
begin.
1. On double oven models, press UPPER OVEN or LOWER
OVEN.
2. Press AUTO CLEAN.
Press the HR "up" or "down" arrow pad to set a clean time
other than 3 hour 30 minutes. The clean time can be set
between 2 hours 30 minutes and 4 hours 30 minutes.
3. Press STOP TIME.
4. Press the HR and MIN "up" or "down" arrows pads to enter
the time of day to stop.
5. Press START/ENTER.
The start time is automatically calculated and displayed.
The door will automatically lock and "DOOR LOCKED",
"DELAY", and the stop time will also appear on the display.
The door will not unlock until the oven cools.
When the start time is reached, the oven willautomatically
turn on.
When the cycle is complete and the oven cools, "End" will
appear on the lower oven display and "DOOR LOCKED" will
disappear.
6. Press any pad or open the oven door to clear the oven
display.
To Stop Self-Clean any time:
PressUPPER OFF,LOWER OFF or OFF/CANCEL Ifthe oven
temperature is too high, the door will remain locked. It willnot
unlock untilthe oven cools.
11
Cleaning
IMPORTANT: Before cleaning, make sure allcontrols are off and
the oven is cool. Always follow label instructionson cleaning
products.
Soap, water and a soft cloth or sponge are suggested firstunless
otherwise noted.
m
STAINLESSSTEEL (on some models)
, ,,,,, ,,,
Do not usesoap-filled ecouring pads, abrasive cleaners, Cooktop
PolishingCreme, steel-wool pads, gritty wash cloths or some
paper towels. Damage may occur.
Rub in directionof grain to avoid damaging.
•Stainless Steel Cleaner & Polish (not included):
See "Assistance or Service" section to order.
•Liquid detergent or all-purpose cleaner:.
RLnsewith clean water and dry with soft, lint-free cloth.
•Vinegar for hard water spots
OVEN DOOR EXTERIOR
•Glass cleaner and paper towels or non-abrasive plastic
scrubbing pad
CONTROL PANEL
_rirrrraiq
Do not use abrasive cleaners, steel-wool pads, grittywash cloths
or some paper towels. Damage may occur.
•Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
OVEN CAVITY
Do not use commercial oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain and staining,etching,
pitting or faint white spots can result.
•Self-Cleaning cycle:
See "Self-Cleaning Cycle" first.
OVEN RACKS
• Self-Cleaning cycle:
See "Self-Cleaning Cycle" first. Racks will discolor and
become harder to slide. After cleaning, a lightcoating of
vegetable oil applied to the rack guides will help them slide.
Steel wool pad
m m
BROILER PANAND GRID
Do not clean in the Self-Cleaning cycle.
• Mildly abrasive cleanser:
Scrub with wet scouring pad.
• Solution of 1/2cup (125 mL) ammonia to 1 gallon (3.75 L)
water:
Soak for 20 minutes, then scrub with scouring or steel wool
pad.
• Oven cleaner:
Follow product label instructions.
Porcelain enamel only, not chrome
•Dishwasher
12
OvenLights
The oven lights are standard 4g-watt appliance bulbs. They will
come on when the oven door is opened. They will not work
during the Self-Cleaning cycle. When the oven door is closed,
press OVEN LIGHT to turn them on or off.
To Replace:
Before replacing, make sure the oven is off and cool.
1. Disconnect powe_
2. Turn the glass bulb cover in the back of the oven
countemlookwise to remove.
3. Grasp under door handle and carefully cloee door as far as it
will shut. Pull door out from the bottom.
3. Turn bulb counterclookwise to remove from eecket.
4. Replace bulb and bulb cover by turning clockwise.
5. Reconnect power.
OvenDoor
There is no need to remove the oven door for normal use.
However, it can be done if necessary.
Before removing or replacing, make sure all controls are off and
the oven is cool. The oven door is heavy. Use both hands, do not
lift or carry the door by the handle and another person to help is
suggested. Use care not to damage the outer finish.
To Remove:
1. Open the oven door all the way.
2. Insert shortend of door removal pins, included withthe oven,
into both hinge hangers. Two %2in. (4 mm) allenwrenches or
two nailsof similardiameter can be used if door removal pins
have been misplaced. Do not remove the pinswhile the door
is removed.
To Replace:
1. Make suredoor removal pins have not been removed, Fit
hinge arms into slots inframe. Push inat lower corner to
ensure hinge arms are fully engaged,
2. Open the door completely and remove the door removal pins.
Save them for future use.
3. Close oven door. If the door does not operate freely, repeat
the process.
\
1
1. Insert small end of pin here
13
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the
coat of an unnecessary service call.
Nothing willoperate
=Has a household fuse been blown or has the circuit
breaker been tripped?
Replace the fuse or reset the circuit.
•Is the appliance wired propedy?.
See InstallationInstructions.
Oven will not operate
•Is the electronic oven control set correctly?.
See "Electronic Oven Control" section.
a
a
Has a delay start been set?.
See "Timed Cooking" section.
On some models, is the Control Lock set?
See "Control Lock" section.
On some models, is the Sabbath Mode set?.
See "Sabbath Mode" section.
On double oven models, is one oven self-cleaning?
When one oven is self-cleaning the other oven cannot be set
or turned on.
On double oven models,has the correct oven been
selected?
Choose UPPER OVEN or LOWER OVEN first.
Oven temperature too high ortoo low
Does the oven temperature calibration need adjustment?.
See "Oven Temperature Control" section,
Display shows messages
=Is the display showing "PF"?
There has been a power failure. Clear the display.See
"Display(s)"section. On some models, reset the clock, if
needed. See "Clock" section.
aIs the display showing a letter followed by a number?.
Clear the display. See "Display(s)" section. If itreappears, call
for service. See "Assistance or Service" section.
Self-Cleaning cycle will not operate
=Is the oven door open?
Close the oven door all the way.
aHas the function been entered?
See "Self-Cleaning Cycle" section.
•On some models, has a delay start Self-Clean cycle been
set?,
See "Self-Cleaning Cycle" section.
aHas a delay start been set?
See "Timed Cooking" section.
aOn double oven models, is one oven self-cleaning?
When one oven is self-cleaning,the other oven cannot be set
to self-clean.
Oven cooldng results not what expeoted
•Is the appliance level?
Level the appliance. See the Installation Instructions.
•Is the proper temperature set?
Double-check the recipe in a reliable cookbook.
aIs the proper oven temperature calibration set?.
See "oven Temperature Control" section.
•Was the oven preheated?
See "Baking and Roasting"section.
•Is the proper bakeware being used?
See "Bakeware" section.
•Are the racks positioned propedy?.
See "Positioning Racks and Bakeware" section.
•Is there proper air circulation around bakeware?
See "Positioning Racks and Bakeware" section.
•Is the batter evenly distributod in the pan?
Check to make surebatter is level inthe pan.
•Is the proper length of time being used?
Adjust cooking time.
•Has the oven door been opened while cooking?
Oven peeking releasesoven heat and can resultin longer
cooking times.
aAre baked items too brown on the bottom?
Move rack to higher position inthe oven.
a Are pie crust edges browning early?.
Use aluminum foil to cover the edge of the crust.
14
ASSISTANCEORSERVICE
Before calling for assistance or service, please check
"Troubleshooting." It may save you the cost of a service call. If
you still need help, fo,ow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If you need replacement parts
If you need to order replacement parts, we recommend that you
only use FSP®replacement parts. FSP® replacement parts wil fit
right and work right because they are made with the same
precision used to build every new WHIRLPOOL ® appliance.
To locate FSP®replacement parts in your area, call our Customer
Interaction Center telephone number or your nearest Whirlpool
designated service center.
htheU.S
Call the Whirlpool Customer Interaction Center
toll free: 1-800-253-1301.
Our consultants provide assistance with:
•Features and specificationson our full line of appliances.
•Installationinformation.
•Use and maintenance procedures.
•Accessory and repair parts sales.
•Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
•Referrals to local dealers, repair parts distributors, and
service companies. Whirlpool designated service technicians
are trained to fulfil[the product warranty and provide after-
warranty service, anywhere in the United States.
To locate the Whirlpool designated service company in your
area, you can also look in your telephone directory Yellow
Pages.
For further assistance
If you need further assistance, you can write to Whirlpool
Corporation with any questions or concerns at:
Whirlpool Brand Home Appliances
Customer Interaction Center
c/o Correspondence Dept.
MD 8020
553 Benson Road
Benton Harbor, MI 49022-2400
Please include a daytime phone number in your correspondence.
Accessories U.S.A
Toorder accessories, call the Whirlpool Customer Interaction
Center tollfree at 1-800-253-1301 and follow the menu prompts,
Or visitour website at www.whirlpool.com and click on "Buy
Accessories Online".
Stainless Steel Cleaner & Polish
(stainlesssteel models)
Order Part #4396095
InCanada
For product related questions, please call the Inglis Limited
Customer Interaction Center toll free:
t-800-461-5681 8:30 a.m. - 5:30 p.m. (ES'r)
Our consultants provide assistance with:
•Features and specificationson our full line of appliances.
•Referralsto local dealers.
For parts, accessories and service in Canada
Call 1-800-807-6777. Inglis Limited designated service
technicians are trained to fulfillthe product warranty and provide
after-warranty service, anywhere in Canada.
For further assistance
Ifyou need further assistance,you can wdte to InglisLimitedwith
any questions or concerns at:
Customer Interaction Center
InglisLimited
1901 Minnesota Court
Mississauga,Ontario LSN3A7
Please include a daytime phone number in your correspondence.
15
Quick Reference
Table of Contents:
Pages
[] Product dimensions
[] Cutout dimensions
[] Before you start
[] Electrical requirements
[] [] Installation steps
If you need assistance:
Check your Use and Care Guide for atoll-free number to call or call
the dealer from whom you purchased this appliance. The dealer is
listed in the Yellow Pages of your phone directory under
"Appliances -- Household -- Major -- Service and Repair."
Call when you:
[] Have questions about built-in oven installation or operation.
[] Need to obtain the name and number of an authorized service
company.
When you call, you will need:
[] The built-in oven model number.
[] The built-in oven serial number.
Both numbers are listed on the model/serial rating plate, located on
the oven door or on the oven frame.
Single oven
22-3/8" max.
recessed
width
23"max.
recessed
23-3/4"
_overallwidth
27-3/4"
min.
cutout
height
•_-- 24"min. ---_-
cabinet width
22-1/2"
cutout width _1
Single oven
undercounter
(without cooktop
installed above)
T
27-3/4"
min.
cutout
height
+
1-1/2"
min.
bottom of
cutout to
top of
cabinet
door
24" min.
_--- cabinet width --
22-1/2"
•_--- cutout ---_-
width
Single oven
29" max.
overall
height
49-1/2"
recessed
height
23"max.
recessed
depth
Double oven
22-3/8" max.
23-3/4" width
+
l-1/2"min.
top ofcutout
to underside
of countertop
5-1/4" bottom of
cutout to floor
49-3/4"
min.
cutout
height
+
1-1/2" min.
bottom of
cutout to top of
cabinet door
24" min.
cabinet _-_
22-1/2"
cutout --
width
Double oven
1" top of cutout
to bottom of
upper cabinet
door
32"
bottom of
cutout to
floor
cabinet---+--
23-1/4"min.
•_-- cutoutdepth
_--- 23"recessed
oven depth
recessed
oven
Cabinet side view
J
J
51" max.
overall
height
J
1"top ofcutout
to bottom of
upper cabinet
door
J_
7-
14-3/4"
bottom
of cutout
to floor
oven
/front
Important: Observe all governing codes
and ordinances.
Proper installation isyour responsibility.
Have a qualified technician install this oven.
Oven location should be away from strong draft
areas, such as windows, doors and strong
heating vents.
Cabinet opening dimensions that are shown
must be used. Given dimensions provide
minimum clearance.
Recessedinstallation area must provide
complete enclosure around the recessed portion
of the oven.
Electricalground is required. See "Electrical
requirements."
Electrical supply junction box should be located
3 inches maximum below the support surface
when oven is installed in a wall cabinet. Drill a
1-inch minimum diameter hole in the right rear
or left rear corner of the support surface to pass
the appliance cable through to the junction box.
For undercounter installation, it is recommended
that the junction box be located in the adjacent
right or left cabinet. If installing the junction box
on rear wall behind oven, junction box must be
recessed and located in the upper or lower right
or left corner of cabinet.
Oven support surface MUST be solid, level and
flush with bottom of cabinet cutout.
It is the customer's responsibility:
To contact a qualified electrical installer.
To assure that the electrical installation is
adequate and in conformance with National
Electrical Code, ANSI/NFPA 70 -- latest edition*,
and all local codes and ordinances.
Copies of the standards listed may be obtained from:
*National Fire Protection Association
Batterymarch Park
Quincy, Massachusetts 02269
Tool needed:
Z
screwdriver
Parts supplied:
4 screws (double oven)
Note: If installing a single oven, you will need
only two screws and two door removal pins.
Page 1
ElectricalShock Hazard
Electrically ground oven.
Connect ground with lO-gauge-minimum solid
copper wire.
Failure to follow these instructions could result
in death, fire or electrical shock.
If codespermit and a separate grounding wire is
used, it is recommended that a qualified electrician
determine that the grounding path and wire gauge
are in accordancewith local codes.
Do Not ground to a gas pipe.
Checkwith a qualified electrician if you are not
sure oven is properly grounded.
Do Not have a fuse in the neutral or grounding
circuit.
Oven must be connected to the proper electrical
voltage and frequency as specified on the
model/serial rating plate. (The model/serial rating
plate is located on the oven door or on the oven
frame.)
[] CONNECT WITH COPPERWIRE ONLY.
[] Models rated from 7.3 to 9.6 kW at 240 volts
(5.5 to 7.2 kW at 208 volts) require a separate
40-ampere circuit. Models rated at 7.2 kW and
below at 240 volts (5.4 kW and below at 208
volts) require a separate 30-ampere circuit.
[] A time-delay fuse or circuit breaker is
recommended.
[]
[]
[]
[]
Connect directly to the fused disconnect (or
circuit breaker box) through flexible, armored
or non-metallic sheathed, copper cable (with
grounding wire).
Flexible armored cable from appliance should
be connected directly to junction box.
Fuse both sides of the line.
A U.L.-listed conduit connector must be
provided at the junction box.
[] Do Not cut the conduit.
Wire sizes and connections must conform with
the rating of the appliance and to the
requirements of the National Electrical Code,
ANSI/NFPA 70 -- latest edition (*, See Page 1)
and all local codes and ordinances.
if! Oraspoven
frameto lift
oven.
" I iii!iXiiiii!i!Check oven
i;iiiiiijij_operation, 1
ii! "em°ve
ovenracks.
i!i:xii!Ipower
supplycable
Remove_v_
shipping\
feet.
Replace
ovendoor. ili!iiii"em°ve
ovendoor.
re,aration
Excessive Weight Hazard
Use two or more people to move and install
oven.
Failure to follow this instruction can result in
back or other injury.
Important: Use both handsto remove oven
doors.
Do Not use handleor any portion of the front
frame or trim for lifting.
Beforemoving oven acrossfloor, checkthat oven
is on shippingbase or slideoven onto cardboard
or hardboard.
Do Not remove shippingfeet at the front lower
cornersof oven.
Use screws to attach
oven to cabinet.
Reattach side Graspoven
................................frameto lift
oven.
Reattach side
_leces.
Remove
trim screws.
Remove side
trim,
cabinet.
power \
................................supplycable
Remove
shipping
feet.
Remove side
trim.
Remove trim
screws.
Remove
oven doors.
Rep,ace
................................ovendoors.
Insert small
end of pin
here.
_. Removetrim screw.
Pulltrim out.
shippingfeet.
• Turn power supply off. Move oven close to
final position.
• Remove and discard shipping materials, tape
and protective film from the oven. Do Not
remove shipping base or shipping feet at the
front lower corners of oven. The shipping feet
will protect the lower oven trim until oven is
inserted into cabinet.
• Remove and set aside racks and other parts
from inside oven.
• Completely open lower oven door. Insert
small end of a door removal pin into each door
hinge. Grasp door handle from the bottom and
gently close door as far as it will shut. Lift slightly
and grasp bottom of door with other hand. Pull
door out at bottom to remove. Set door aside on
protected surface.
Repeat for upper oven door.
Pull top of trim
down.
• Remove trim screws attaching right and
left side trim to oven. Grasp the bottom end of
trim and pull away from oven. Slide top end of
trim downward to remove trim from oven. Take
care not to scratch other surfaces with ends of
trim. Set trim and screws aside on protected
surface.
Page 2
iiiiii!iE'ectrica'connection
Electrical Shock Hazard
Disconnect power to the junction box before
making connection.
Electrically ground oven.
Connect ground with 10-gauge-minimum solid
copper wire.
Failure to follow these instructions could result
in death, fire or electrical shock.
This oven is manufactured with white (neutral)
power supply wire and a cabinet-connected bare
grounding wire twisted together.
Feed oven cable through opening in
• the cabinet. Make electrical connection
following the steps needed for your installation.
1. Disconnect the power supply.
2. Remove the junction box cover.
3. Connect oven cable to junction box through the
U.L.-listed conduit connector.
4. Connect the two black wires together with
twist-on connectors.
5. Connect the two red wires together with
twist-on connectors.
6. Complete electrical connection according to
local codes and ordinances.
junction
box _
red_
white _
w_re _
grounding oven
cable wires --
factory crimped
Figure 1
cable from
power supply
cable from conduit
oven connector
If local codes PERMIT
connecting cabinet-grounding
conductor to neutral white
wire in junction box:
7. Connect the factory-crimped
bare and white oven cable wires
to the neutral (white) wire in
junction box. See Figure 1.
8. Replace junction box cover.
cable from
junction power supply
Figure 2 cable from connector
oven
If local codes DO NOT PERMIT
connecting cabinet-grounding
conductor to neutral white
wire in junction box:
7. Separate the factory-crimped
bare and white oven cable wires.
8. Connect white oven cable wire to
neutral (white) wire in junction
box. See Figure 2.
9. Connect the bare grounding
oven cable wire to a grounded
wire in the junction box. See
Figure 2.
10. Replace junction box cover.
If connecting to a
four-wire electrical system:
7. Separate bare and white oven
cable wires.
8. Connect white oven cable wire
to neutral (white) wire in
junction box. See Figure 2.
9. Connect the bare grounding
oven cable wire to the green
grounding wire in junction box.
Do Not connect bare grounding
wire to neutral (white) wire in
junction box. See Figure 2.
10. Replace junction box cover.
li tA.ac"ment
Carefully push against seal area of oven front
frame when pushing oven into cabinet.
Do Not push against outside edges.
• Lift oven into cabinet cutout using the
oven opening as an area to grip.
shipping
foot
Push against seal area of front frame to push
oven into cabinet until shipping feet almost
contact cabinet. Use a Phillips screwdriver to
remove screws attaching shipping feet. Remove
and discard shipping feet.
Push oven completely into cabinet and center
oven in cabinet cutout.
0
-8• Replace oven racks.
Important: Replace the door with the model/serialrating plate on the upper oven.
On some models, the construction of this door is
designed to withstand self-cleaning temperatures.
4 screws
\
door
hinge
J
J
J
J
• Important: Securely fasten oven to cabinet
using the screws provided (two screws for a single
oven or four screws for a double oven). Insert the
screws through holes in mounting rails. Do Not
overtighten screws.
Slide top
of trim up,
Pushtrim
into place.
Replace
trim screw.
oven frame
hinge slot
Replace the single or upper oven door by
• inserting ends of hinges into hinge slots in
oven frame. Push behind each hinge so that hinges
are pushed into oven frame as far as they will go.
Open door and remove both door removal pins.
Close and open door to check that door closes and
opens completely. If door does not close or open
completely, you have not pushed hinges
completely into frame. Repeat door removal step
and reinsert door into hinge slots again.
Repeat for lower oven door.
• Slide top end of each trim upward onto oven
side rails. Push each trim into place at bottom of
trim. Use screws to attach each trim to oven. Take
care not to scratch other surfaces with ends of trim.
Ii!i#IC,e°,o,erot,o.
0• Turn on power supply. The display
panel will light up briefly. "PF" should appear in
the temperature display.
BAKE BROIL
Checkthe operation of your single oven.
Press the "BROIL" pad. "BROIL" will appear in
the display. Press the "START" pad. Make sure the
oven door is closed and the "ON" light is shown in
the display area. After 2 minutes, partially open
oven door. You should feel heat from the oven.
Press the "CANCEL" pad.
Check the operation of your double oven.
Press the "Upper Oven" pad. Pressthe "BROIL"
pad. "BROIL" will appear in the display. Press the
"START" pad. Make sure the oven door is closed
and the "ON" light is shown in the display area.
After 2 minutes, partially open oven door. You
should feel heat from the oven. Pressthe
"CANCEL" pad.
Press the "Lower Oven" pad and repeat the steps
you completed for checking the upper oven.
If your oven does not heat or an "F", followed
by a number, appears in the display, contact
your dealer or check the "If you need service..."
section of this Installation Instructions.
To get the most efficient use
from your new oven, read your
Use and Care Guide. Keep Installation
Instructions
and Guide close to oven
for easy reference.
Page 3
If oven does not operate:
[] Check that circuit breaker is not tripped or
house fuse blown.
[] See Use and Care Guide for troubleshooting list.
If you need assistance:
If you have questions about operating, cleaning or
maintaining your oven:
[] Refer to Use and Care Guide.
[] Call the Consumer Assistance Center: Check
your Use and Care Guide for a toll-free
number to call or call the dealer from whom you
purchased this appliance. The dealer is listed in
the Yellow Pages of your phone directory under
"Appliances -- Household -- Major -- Service
and Repair."
If you need service:
Maintain the quality built into your built-in oven by
calling an authorized service company.
To obtain the name and number of an authorized
service company:
[] Contact the dealer from whom you purchased
your built-in oven; or
[] Look in the Yellow Pages of your telephone
directory under "Appliances -- Household --
Major -- Service and Repair" for an authorized
service company; or
[] Call the Consumer Assistance Center. The toll-
free phone number is listed in your Use and
Care Guide.
When you call, you will need:
[] The built-in oven model number.
[] The built-in oven serial number.
Both numbers are listed on the model/serial rating
plate, located on the oven door or on the oven
frame.
Part No. 4450409 Rev. A
© 1996 Printed in U.S.A.
WHIRLPOOL®COOKTOP,BUILT-INOVENANDRANGEWARRANTY
FULL ONE-YEAR WARRANTY
For one year fromthe date of pumhaee, when this appliance is operated and maintained according to instructionsattached to or
furnishedwith the product, Whirlpool Corporation will pay for FSP®replacement parts and repair labor to correct defects inmaterials or
workmanship, Service must be provided by a Whidpool designated service company,
FULL FIVE-YEAR WARRANTY
On ceramic glass ranges and ceramic glass cook'tops, for five yearsfrom the date of purchase, when this appliance is operated and
maintained according to instructionsattached to or furnished with the product,Whirlpool Corporationwill pay for FSP®replacement
parts and repair labor for the CLEANTOP®ceramic glass cooktop.
Whidpool Corporation warrants that the ceramic glass cooktop willnot discolor,the cooktop pattern will not wear off, the rubber seal
between the ceramic glass cooktop and porcelainedge will not crack, the ceramic glass cooktop will not crack due to thermal shock
and the surface unit elements will not burnout. Service must be provided by a Whirlpooldesignated service company.
Whirlpool Corporation will not pay for:.
I. Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to replace house fuses or
correct house wiring, or to replace owner-accessible light bulbs.
2. Repairs when your appliance is used in other than normal, single-familyhousehold use.
3. Pickup and delivery. Yourappliance is designed to be repaired inthe home.
4. Damage resultingfrom accident, alteration, misuse, abuse, fire, flood, improper installation,acts of God or use of products not
approved by Whirlpool Corporation or Inglis Limited.
5. Repairs to CLEANTOP®ceramic glass cooktop ifit has not been cared for as recommended inthe Use and Care guide.
6. Repairs to parts or systems resulting frcm unauthorized modifications made to the appliance.
7. Replacement parts or repair labor costs for units operated outside the United States or Canada.
8. In Canada, travel or transportation expenses for customers who reside in remote areas.
WHIRLPOOL CORPORATION AND INGLIS LIMITED SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
Some states or provinces do not allow the exclusionor limitation of incidental orconsequential damages, so this exclusionor limitation
may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to
state or province to province.
Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized Whirlpool dealer to determine
if another warranty applies.
If you need service, first see the "Troubleshooting" section of this book. After checking "Troubleshooting," additional help can be found
by checking the "Assistance or Service" section or by calling the Whirlpool Customer interaction Center, 1-800-253-1301 (toll-free),
from anywhere in the U.S.A. For parts and service in Canada, please can 1-800-807-6777. For product related questions in Canada,
please call 1-800-461-5681.
O5/0O
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Wdte down the following informationabout your appliance to
better help you obtain assistance or service ifyou ever need it.
Youwill need to know your complete model number and serial
number. You can find this informationon the model and serial
number label/plate, located on your appliance as shown inthe
"Parts and Features" section.
Dealer name
Address
Phone number
Model number
Serial number
Purchase date
44505689 ®RegisteredTrademaW./TMTrademarkof Wh_dpod,U,SJ_. 09/00
©2000 Whidpool Corporation, All rightsreserved, leglisLJm_edlicensee in Cana0a PnntedinU.SA.

Navigation menu