White Rodgers 25M01A 100 25M Gas Dryer Valves Brochure R 4080
2015-03-28
: White-Rodgers White-Rodgers-25M01A-100-25M-Gas-Dryer-Valves-Brochure-676722 white-rodgers-25m01a-100-25m-gas-dryer-valves-brochure-676722 white-rodgers pdf
Open the PDF directly: View PDF .
Page Count: 8
Download | |
Open PDF In Browser | View PDF |
WHITE-RODGERS 25M SERIES GAS CONTROLS PRODUCT INFORMATION The 25M series gas control is a compact, multifunctional valve, with a direct-acting regulator ideal for use in pilot valve applications, thru-the wall heaters, RV heaters, gas clothes dryers, hearth products, radiant heat systems, water heaters, cooking applications, agricultural heaters/ dryers, or other high-efficiency equipment. The 25M valve, provided with a straightin inlet, has various outlet configurations that, when coupled with the various pipe sizes available, make for easy adaptation to a given application. Optional features, such as the inlet pressure tap, increase the flexibility in adapting this valve. Available configurations include: ❚ Single Solenoid (for pilot valve applications) ❚ Dual Solenoid, Valves in Series (for applications requiring redundancy) ❚ Dual Solenoid, Valves Independent (for dual burner applications) ❚ Split-Coil (for use with Hot Surface Ignition systems) ❚ Two-Stage (for applications requiring both high-fire and low-fire settings) general specifications Standard Features 25M Appliance 25M Manifold X X X X X X X X X X X X X X X X X X X X X Compact Size (3-13/32" x 2-1/2" - 2-19/32") Split Coil Single Solenoid Dual Solenoid Inlet Screen (protected from pipe damage) Outlet Screen (protected from pipe damage) Field Adjustable Regulator Replaceable Operating coils without interrupting gas flow Outlet Pressure Tap Ambient Temperature Rating: 32˚ to 155˚F Ambient Temperature Rating: 32˚ to 175˚F Straight Through Outlet (offset) .110 x .010 Male Terminals 3/16" Male Tab Type Terminals Optional Features 25M Appliance X X 25M Manifold X X X X X X X X X X X X X Orifice Holder Outlet Right/Left Angle Outlets Dual Outlets (Right-Angle-Left AND Right-Angle-Right or Straight Through Inverted Flare British Threads (Rp) Inlet Pressure Tap Natural to LP Regulator Selector (convertible) European Quiet-Type Solenoids Encapsulated Leads Ground Terminal Tamper Evident Regulator Seal Low Ambient Temperature Rating (-40˚ to 175˚F) High Capacity Model (60 KBTU Natural Gas) Two-Stage Operation (Right-Angle-Left or Right-Angle-Right Only) Regulator Adjustment Range Natural Gas: Range of Regulations Natural Gas: 2.8" to 4.0" W.C. 3.5" to 5.4" W.C. LP Gas: 8.5" to 11.4" W.C. 9.0" to 12.0" W.C. 5,000 to 55,000 BTU/hr 5,000 to 65,000 BTU/hr — Dual Solenoid Independent LP Gas: 8,000 to 89,000 BTU/hr 8,000 to 104,000 BTU/hr — Dual Solenoid Independent Conversion Kits Part Number From Natural Gas to Regulated LP: From LP to Natural Gas: From Natural gas to LP: 2 F73-1493 F73-1561 F69-2257 Regulates between 9.0" to 12.0" W.C. Regulates between 2.8" to 4.0" W.C. Blocks open the Regulator (Blocking Pin) 25M GAS CONTROL PRODUCT INFORMATION R-4080 general specifications Current Requirements OPERATOR(S) REQUIREMENT (AMPS) Voltage Frequency Single Coil Dual Coil, Parallel (total draw) 12 24 24 DC DC 50 Hz .240 .120 .210 .480 .240 .420 24 120 120 60 Hz 50 Hz 60 Hz .175 .035 .030 .350 .070 .060 240 240 50 Hz 60 Hz .030 .025 .060 .050 SPLIT-COIL VERSIONS Model # Rated Volts Hertz 25M01A 120 120 120 120 25M01B SPLIT-COIL 25M01A 1" P.D. Capacity 40K 2" P.D. Capacity 60K Range of Regulation 5 to 55K Ambient Temperature 32˚ to 155˚ F Rating Outlet Pressure 2.8" to 4.0" Adjustment Range Operating Mode Comments 60 60 50 Start Running Start Glo-Bar On, Sensor Closed Glo-Bar Off, Sensor Open Glo-Bar On, Sensor Closed 50 Running Glo-Bar Off, Sensor Open DUAL SOLENOID REDUNDANT DUAL SOLENOID INDEPENDENT SINGLE SOLENOID HIGH CAPACITY 25M02 25M12 25M03 25M13 25M04 25M14 25M72 40K 60K 5 to 55K 40K 60K 5 to 55K 30K/side* 35K/side+ 5 to 65K 30K/side* 35K/side+ 5 to 65K 48K 70K 5 to 65K 48K 70K 5 to 65K 52K 73K 25 to 85K 32˚ to 175˚ F -40˚ to 175˚ F 32˚ to 175˚ F -40˚ to 175˚ F 32˚ to 175˚ F -40˚ to 175˚ F -40˚ to 175˚ F 2.8" to 4.0" 2.8" to 4.0" 3.5" to 5.4" 3.5" to 5.4" 2.8" to 4.0" 2.8" to 4.0" 2.8" to 4.0" * 60K with both solenoids energized + 70K with both solenoids energized Maximum Pressure: 1/2 PSI Agency Approvals: CSA Int’l all models Pipe Sizes Inlet: 3/8" or 1/4" NPT or British Threads (Rp) Straight In Outlet: 3/8", 1/4", 1/8" NPT or British Threads (Rp) or Orifice Holder Right Angle Right (RAR), Right Angle Left (RAL), Offset Straight Through, or Right Angle Right and Left (Dual Outlet) 25M GAS CONTROL PRODUCT INFORMATION R-4080 3 general specifications Regulator Operation The 25M series gas valve utilizes a direct acting regulator construction to maintain proper outlet gas pressure for fluctuating inlet pressures. (Refer to Fig. 1) 1) Calibration The regulator is adjusted at the factory to give the outlet pressure to an orifice as required by the customer (This is referred to as the set point). The outlet pressure (B) and the orifice are selected by the customer to give the desired flow rate of gas necesary for his application. This adjustment is made at an inlet pressure (A) of 7.0" W.C. for natural gas and 14.0" for L.P. gas. 2) Flucuating Inlet Pressure (A) When the inlet pressure (A) increases, the outlet pressure (B) starts to increase, but the increasing force created on the diaphragm causes the stem to move closer to the seat thereby throttling the flow and reducing the pressure onto the diaphragm. As this pressure decreases the stem moves away from the seat allowing more flow and higher outlet pressure (B). The outlet pressure, therefore, modulates (high frequency and small amplitude) with respect to the set point. This is normal operation for direct acting types of regulators. Figure 1 Outline and Mounting Dimensions Single Stage Model 4 25M GAS CONTROL PRODUCT INFORMATION R-4080 general specifications Outline and Mounting Dimensions (cont.) Two Stage Model MAIN COIL, 12 V.D.C., 3/16 QUICK DISCONNECT TERMINALS (LABELED "1" AND "2") 2 MOUNTING HOLES CORED FOR 8-32 SELF-TAPPING SCREWS 7/16 DEEP. L C OF OUTLET 3.468 1.406 .546 2.390 1 18° TYP. .781 DO NOT GRIP 2.947 4 REDUNDANT COIL, 12 V.D.C., 3/16 QUICK DISCONNECT TERMINALS (LABELED "3" AND "4") 6 CONTROL LABEL THIS SURFACE DO NOT VENT / LEAK LIMITER ORIFICE 5 4.217 GRIP HERE OF INLET 2 HERE 3 L C 1.531 2ND STAGE COIL, 12 V.D.C., 3/16 QUICK DISCONNECT TERMINALS (LABELED "5" AND "6") Typical Wiring Diagrams TYPICAL WIRING DIAGRAM FOR MODEL 25M APPLIANCE VALVE TYPICAL WIRING DIAGRAM FOR MODEL 25M MANIFOLD VALVE Cross-Sectional Views Figure 2 - CROSS-SECTIONAL VIEW OF 25M APPLIANCE VALVE 25M GAS CONTROL PRODUCT INFORMATION R-4080 5 general specifications Cross-Sectional Views (cont.) Figure 2 - CROSS-SECTIONAL VIEW OF 25M MANIFOLD VALVE 25M Performance Curves Natural Gas (1000 BTU/FT3, .64 SP. GR.) 2.0 4.5 Set Point: Q = 23.4 KBTU/hr Pout = 3.5" W.C. Outlet Pressure ("W.C.) Pressure Drop ("W.C.) 1.8 1.6 1.4 1.2 1.0 .8 .6 .4 .2 0 4.0 X 3.5 3.0 2.5 2.0 0 20 30 40 50 60 70 Capacity (KBTU/hr) 80 90 100 0 10 20 30 40 50 60 Capacity (KBTU/hr) 70 90 100 80 90 100 L.P. Gas (2500 BTU/FT3, 1.53 SP. GR.) 11.5 Outlet Pressure ("W.C.) Pressure Drop ("W.C.) 2.0 1.8 1.6 1.4 1.2 1.0 .8 .6 .4 .2 0 10.5 Set Point: Q = 37.7 KBTU/hr Pout = 11.0" W.C. 10.0 9.5 9.0 0 6 X 11.0 20 30 40 50 60 70 Capacity (KBTU/hr) 80 90 100 0 20 30 40 50 60 70 Capacity (KBTU/hr) 25M GAS CONTROL PRODUCT INFORMATION R-4080 features Flip-Flop Convertible Regulator Conversion from LP to NAT (or vice-versa) accomplished by inverting the position of the conversion screw and replacing the orifice. No further adjustment is required (convertible feature is CSA Int’l approved as a fixed-adjust convertible regulator). No provision for field adjustment as special tool is required. “Flip-Flop” Conversion Screw (LP Position Shown) Set Screw (LP Setting) Nylon ADJ Screw (NAT Setting) Shaft Spring Alternative Gas Paths 25M GAS CONTROL PRODUCT INFORMATION R-4080 7 models available Each valve is uniquely defined by a model number succeeded by the type number as follows: 25M xx x – xxx BASIC MODEL NUMBER SERIES SPECIFICATION OF OPTIONS/FEATURES 01 – Split Coil Model (For use with Power-Vented Si Carbide Ignition Systems), 32˚-175˚ F TYPE NUMBER CODING Number Pipe Size (inlet x outlet) 001-099 Rp Threads 02 – Redundant Solenoids (Valves in Series), 32˚-175˚F 100-199 3/8" x 11/32" (Orifice) 200-299 1/4" x 1/8" NPT 03 – Independently Operating Valves (Dual Burner Applications), 32˚-175˚F 300-399 1/4" x 1/4" NPT 400-499 1/4" x 3/8" NPT 500-599 3/8" x 1/8" NPT 04 – Single Solenoid, 32˚-175˚ F 600-699 3/8" x 1/4" NPT 05 – Two-Stage Manifold, -40˚-175˚ F 700-750 3/8" x 3/8" NPT 751-799 Special Fittings (751-779) (780-799) 3/8" x 3/8" Inverted Flare 3/8" x 1/4" Compression Fitting 800-899 Regulated LP (25M01) 900-999 Available to be defined 11 – Same as 01 except 50 mbar rating 12 – Same as 02 except -40˚-175˚ F rating 13 – Same as 03 except convertible regulator, -40˚-175˚ F rating 14 – Same as 04 except -40˚-175˚ F rating 16 – RV applications, -40˚-175˚ F, high sealing force, regulated LP Type numbers also define minor features, such as: Customer Required Labelling Inlet/Outlet Configuration Natural Gas or LP Regulator Setting Electrical Connections 18 – RV applications, Nat/LP Convertible (Flip/Flop), -40˚-175˚ F 19 – Same as 16 except fixed regulator, encapsulated leads VOLTAGE LETTER CODING 22 – Same as 02 except Rp Threads Letter 26 – Same as 12 except Rp Threads Voltage Frequency None 24 60 Hz A 120 60 Hz B 120 50 Hz C 24 50 Hz 43 – Same as 42 except slow-open, 0˚-60˚ C F 100 50 Hz 47 – Same as 17 except EN-spec quiet DC, 0˚-60˚ C G 240 60 Hz H 220 50 Hz M# 220/240 DC* P# 24 50/60 Hz S# 220/240 50/60 Hz V 12 DC X# 24 DC* 42 – Same as 02 except EN-spec quiet DC, 0˚-60˚ C 51 – Same as 01 except converted for LP use (regulator blocked open) 72 – Same as 12 except High Capacity 82 – Same as 42 except High Capacity * Rated for Full-Wave Rectified AC # European Quiet-Type Solenoids WHITE-RODGERS WHITE-RODGERS DIVISION EMERSON ELECTRIC CO. 9797 REAVIS ROAD ST. LOUIS, MISSOURI 63123-5398 USA Tel: (314) 577-1300 Fax: (314) 577-1517 www.white-rodgers.com R-4080
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.1 Linearized : No Page Count : 8 Create Date : 2002:01:11 15:16:36 Producer : Acrobat Distiller 3.01 for Power Macintosh Subject : r-4080 Creator : Adobe PageMaker 6.52 Title : r-4080 Author : Terri JahnsEXIF Metadata provided by EXIF.tools