User manual
RELEASED TO, FOR LIMITED CIRCULATION WISILICA NETWORK LIGHTING | SENSOR AND CONTROL SERIES RELEASED TO , FOR LIMITED CIRCULATION Table of Contents 1. Block Diagram ........................................................................................................................................................................... 3 2. General Specifications .......................................................................................................................................................... 3 3. Sensor Specifications............................................................................................................................................................ 4 4. PIR Sensor Characteristics ................................................................................................................................................ 4 5. Color Sensor Characteristics ............................................................................................................................................. 5 6. Device Dimensions (mm) ................................................................................................................................................... 5 7. Wiring Diagram ........................................................................................................................................................................6 8. Wire Description.......................................................................................................................................................................6 9. Use Cases ......................................................................................................................................................................................7 WISILICA NETWORK LIGHTING | SENSOR AND CONTROL SERIES RELEASED TO , FOR LIMITED CIRCULATION 1. Block Diagram 2. General Specifications Symbol Connection Distance (Device to Device) Min Typ. 10 20 256 ea Number of Devices (Mesh Connection) Max. Unit. Remarks In an open office environment In an open office environment (within mesh network) ENVIRONMENTAL Operating Temperature Tj 55 ºC Storage Temperature Ts -20 55 ºC 85 Relative Humidity RH IP Rating IP20 Indoor use only ELECTRICAL Input Voltage Vin 12 Input Current 10 Output Current 24 Vdc 15 mA @24Vdc, Max RF transmitting mA Per channel GHz Bluetooth Low Energy 4.2 RF Communication Protocol 2.4 Certification FCC/CE CONTROL Dimming Output 1 0-10V 1+ (CCT) 10 2700-6500K (in 100K resolution) Dimming Output 2 0-10V 2+ (DIM) 10 0-100% (in 1% resolution) WISILICA NETWORK LIGHTING | SENSOR AND CONTROL SERIES RELEASED TO , FOR LIMITED CIRCULATION MECHANICAL Dimension DxH Net Weight 29.6x35.4 mm Designed for plugging into a 1” dia hole on the luminaire 80 90 100 Mounting Height 2.4 3.0 3.6 Detection Coverage X 4.0 4.8 3.0 m mounting height Detection Coverage Y 4.0 4.8 3.0 m mounting height Detection Coverage Z 0.5 3.0 3.0 m mounting height 3. Sensor Specifications PIR SENSOR COLOR SENSOR Dynamic Illuminance Range 10 1000 lux Default Range Setting 19 227 lux Illuminance Accuracy ±5 Color Accuracy ±5 4. PIR Sensor Characteristics WISILICA NETWORK LIGHTING | SENSOR AND CONTROL SERIES User programmable RELEASED TO , FOR LIMITED CIRCULATION 5. Color Sensor Characteristics 6. Device Dimensions (mm) Case Material: 5VA WISILICA NETWORK LIGHTING | SENSOR AND CONTROL SERIES RELEASED TO , FOR LIMITED CIRCULATION 7. Wiring Diagram 8. Wire Description PIN SYMBOL COLOR DESCRIPTION CH1+ Purple CH1 0 to 10V Analog Output CH2+ Blue CH2 0 to 10V Analog Output GND Grey 12V Ground output 12V Red 12V WISILICA NETWORK LIGHTING | SENSOR AND CONTROL SERIES RELEASED TO , FOR LIMITED CIRCULATION 9. Use Cases 1. Sensor inputs controlling Intensity and CCT of LED bulb 2. Controlling multiple LED bulb with Sensor Inputs WISILICA NETWORK LIGHTING | SENSOR AND CONTROL SERIES RELEASED TO , FOR LIMITED CIRCULATION FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. WISILICA NETWORK LIGHTING | SENSOR AND CONTROL SERIES
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 8 Language : en-IN Tagged PDF : Yes Has XFA : No XMP Toolkit : 3.1-701 Producer : Microsoft® Word 2016 Creator : sarath t s Creator Tool : Microsoft® Word 2016 Create Date : 2018:09:11 11:50:44+05:30 Modify Date : 2018:09:27 11:01:40+08:00 Document ID : uuid:B1E61FBC-CE3E-4E7E-A3A4-48EE9135FDD1 Instance ID : uuid:B1E61FBC-CE3E-4E7E-A3A4-48EE9135FDD1 Author : sarath t sEXIF Metadata provided by EXIF.tools