Widex A S PRLI Wireless programming interface for hearing aid User Manual

Widex A/S Wireless programming interface for hearing aid

Contents

User manual

WIDEX A/S Nymoellevej 6, DK-3540 Lynge, Denmarkglobal.widex.comManual no.:9 514 0414 099 #03Issue:2018-01 9 514 0414 099 #03USER INSTRUCTIONSPRO LINKGBDEFRESPTITNLDKNOSEFIKRCNJPTHTRPLTWUS
12321456754361223546987712235469875.1.6.2.7.3.4.
PACKAGE CONTENTS AND DESCRIPTION OF DEVICEPackage contents - see illustration 1:1.1 Fitting device1.2 Regular neckloop (75 cm)1.3 Long neckloop (85 cm)1.4 Docking station1.5 Micro USB cable1.6 Bluetooth® adaptor (model: BT adaptor)1.7 Plugs for the chargerThe device - see illustration 6:6.1 Center LED6.2 Neckloop connectors6.3 LED for the left hearing aid6.4 LED for the right hearing aid6.5 Push button (on/off switch/pairing)6.6 Micro USB port for charging6.7 Reset pinhole button6.8 Bluetooth adaptor - LED6.9 Pairing buttonIMPORTANT SAFETY INFORMATIONWarningsRead this page carefully before you start using this device.Do not use the device in mines or other areas with explosive gases.Do not expose to extreme temperatures or high humidity.When the device is connected via micro USB cable to external mains-operatedequipment such as a charger, PC, audio source or similar, this equipment must com-ply with IEC 60065, IEC 60950-1, IEC 60601-1 or equivalent safety standards.Any change or modification to the device that has not been expressly approved bythe manufacturer could void the user's authority to operate the device.Do not use the product at altitudes above 2000 meters, as extremely low air pres-sure may result in an explosion or the leakage of flammable liquid or gas.Do not dispose of the product with battery into fire or a hot oven.4
Your device should be stored and transported within the temperature and humidityranges of -10°C to +50°C (14°F to 122°F) and < 90% rH.Your device is designed to operate from 5°C (41°F) to 40°C (122°F).For more information about your device, visit: widex.pro.Intended useThe device is intended to connect the COMPASS GPS fitting software with a wirelessWidexLink hearing aid for fitting purposes.5
SETTING UP THE DEVICECharging the device - see illustration 2Connect the docking station to a power outlet and place the fitting device on thedocking station. Alternatively, you can connect the docking station to your computerusing the micro USB cable.NOTELet the battery charge up to 100% before using the device for the first time.Connecting the device to a computer - see illustrations 3,4 and 5To connect your fitting device to your computer using the Bluetooth adaptor, do asfollows:3. Plug the Bluetooth adaptor into an USB port on your computer.4. Turn on the computer.5. Turn on the device. The system is now ready for use.NOTENote that the device only connects to the Bluetooth adaptor provided.You can also use the micro USB cable provided with your fitting device to connect it toyour computer.6
USING THE DEVICEPlace the hearing aids and the neckloop on your client.Press the push button on the device to turn it on and establish connection to the fit-ting software via Bluetooth.Follow the fitting flow as indicated on your computer.Visual indicatorsThe following table shows the available LEDs and what they mean:Power, battery status, charging and Bluetooth pairing (see illustration 7):LED Meaning7.1 The device is on and the battery charged7.2 The device is charging7.3 The battery is running low7.4 The battery is very low7.5 The device is in pairing mode7.6 The device is connected via Bluetooth (only shown shortly after the de-vice has been connected)Communication between hearing aids and the device (see illustration 7):LED Meaning7.7 The device is communicating with the hearing aids7
MAINTENANCEIt is important that you keep your device clean and disinfected before use.●Wipe the device and neckloop with a damp cloth. Do not use any chemicals.●Do not immerse the device or neckloop in water or any other liquid.●Clean the power supply, docking station, Bluetooth adapter and micro USB cableusing a dry cloth.●While the device is not in use, keep it in a dry location out of reach of children andpets.●Never try to open or repair the device yourself. This may only be done by author-ised technicians.8
TROUBLESHOOTINGProblem Possible cause SolutionThe device does not work a: The device is not correct-ly connected to your com-puterb: The battery is lowc: Out of operating rangea: Make sure the device iscorrectly connected andthat the Bluetooth adaptoris plugged into your PC.b: Recharge the batteryc: Move within operatingrangeIf you still experience problems with connecting, pairing or using the device, contactyour supplier for help.9
REGULATORY INFORMATIONEU DirectivesDirective 2014/53/EUHereby, Widex A/S declares that these PRO LINK and BT adaptor are in compliancewith the essential requirements and other relevant provisions of Directive2014/53/EU.The PRO LINK contains radio transmitters operating at: 10.6 MHz, -54 dBµA/m @10 m2.4 GHz, 2.2 mW EIRP.The BT adaptor contains a radio transmitter operating at: 2.4 GHz, 2.1 mW EIRP.A copy of the Declaration of Conformity according to 2014/53/EU can be found at:http://global.widex.com/docN26346Information regarding disposalDo not dispose of hearing aids, hearing aid accessories and batteries with ordinaryhousehold waste.Hearing aids, batteries and hearing aid accessories should be disposed of at sites in-tended for waste electrical and electronic equipment, or given to your hearing careprofessional for safe disposal.10
SYMBOLSSymbols commonly used by Name in medical device labelling (labels/IFU/etc.)Symbol Title/DescriptionManufacturerThe product is produced by the manufacturer whose name and address are statednext to the symbol. If appropriate, the date of manufacture may also be stated.Catalogue numberThe product’s catalogue (item) number.Consult instructions for useThe user instructions contain important cautionary information (warnings/precautions) and must be read before using the product.WarningText marked with a warning symbol must be read before using the product.WEEE mark“Not for general waste”. When a product is to be discarded, it must be sent to adesignated collection point for recycling and recovering to prevent the risk ofharm to the environment or human health as a result of the presence of hazard-ous substances.CE markThe product is in conformity with the requirements set out in European CEmarking directives.RCM markThe product complies with electrical safety, EMC and radio spectrum regulatory re-quirements for products supplied to the Australian or New Zealand market.InterferenceElectromagnetic interference may occur in the vicinity of the product.11
FCC AND IC STATEMENTSFCC ID: TTY-PRLIFCC ID: TTY-BAIC: 5676B-PRLIIC: 5676B-BACAN ICES-3(B)/NMB-3 (B)Federal Communications Commission StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the follow-ing two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that maycause undesired operation.NOTE:This equipment has been tested and found to comply with the limits for a Class B digi-tal device, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not instal-led and used in accordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interference will not occurin a particular installation. If this equipment does cause harmful interference to radioor television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the follow-ing measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.— Consult the dealer or an experienced radio/TV technician for help.NOTE:This equipment complies with FCC radiation exposure limits set forth for an uncontrol-led environment. This transmitter must not be co-located or operating in conjunctionwith any other antenna or transmitter.Changes or modifications to the equipment not expressly approved by Widex couldvoid the user’s authority to operate the equipment.Industry Canada Statement / Déclaration d’industrie CanadaUnder Industry Canada regulations, this radio transmitter may only operate using anantenna of a type and maximum (or lesser) gain approved for the transmitter by In-dustry Canada.155
To reduce potential radio interference to other users, the antenna type and its gainshould be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is notmore than that necessary for successful communication.This device complies with Industry Canada licence-exempt RSS standard(s). Opera-tion is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may causeundesired operation of the device.Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peutfonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvépour l’émetteur par Industrie Canada.Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autresutilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance iso-trope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’éta-blissement d’une communication satisfaisante.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appa-reils radio exempts de licence. L’exploitation est autorisée aux deux conditions sui-vantes :(1) l’appareil ne doit pas produire de brouillage, et(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, mêmesi le brouillage est susceptible d’en compromettre le fonctionnement.156
LICENSE AGREEMENTApache License (mbed TLS)Version 2.0, January 2004http://apache.org/licences/TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION1. Definitions."License" shall mean the terms and conditions for use, reproduction, and distributionas defined by Sections 1 through 9 of this document."Licensor" shall mean the copyright owner or entity authorized by the copyright own-er that is granting the License."Legal Entity" shall mean the union of the acting entity and all other entities that con-trol, are controlled by, or are under common control with that entity. For the purposesof this definition, "control" means (i) the power, direct or indirect, to cause the direc-tion or management of such entity, whether by contract or otherwise, or (ii) owner-ship of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial owner-ship of such entity."You" (or "Your") shall mean an individual or Legal Entity exercising permissionsgranted by this License."Source" form shall mean the preferred form for making modifications, including butnot limited to software source code, documentation source, and configuration files."Object" form shall mean any form resulting from mechanical transformation or trans-lation of a Source form, including but not limited to compiled object code, generateddocumentation, and conversions to other media types."Work" shall mean the work of authorship, whether in Source or Object form, madeavailable under the License, as indicated by a copyright notice that is included in orattached to the work (an example is provided in the Appendix below)."Derivative Works" shall mean any work, whether in Source or Object form, that isbased on (or derived from) the Work and for which the editorial revisions, annota-tions, elaborations, or other modifications represent, as a whole, an original work ofauthorship. For the purposes of this License, Derivative Works shall not include worksthat remain separable from, or merely link (or bind by name) to the interfaces of, theWork and Derivative Works thereof."Contribution" shall mean any work of authorship, including the original version of theWork and any modifications or additions to that Work or Derivative Works thereof,that is intentionally submitted to Licensor for inclusion in the Work by the copyrightowner or by an individual or Legal Entity authorized to submit on behalf of the copy-right owner. For the purposes of this definition, "submitted" means any form of elec-tronic, verbal, or written communication sent to the Licensor or its representatives,including but not limited to communication on electronic mailing lists, source codecontrol systems, and issue tracking systems that are managed by, or on behalf of, the157
Licensor for the purpose of discussing and improving the Work, but excluding com-munication that is conspicuously marked or otherwise designated in writing by thecopyright owner as "Not a Contribution.""Contributor" shall mean Licensor and any individual or Legal Entity on behalf ofwhom a Contribution has been received by Licensor and subsequently incorporatedwithin the Work.2. Grant of Copyright License.Subject to the terms and conditions of this License, each Contributor hereby grants toYou a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copy-right license to reproduce, prepare Derivative Works of, publicly display, publicly per-form, sublicense, and distribute the Work and such Derivative Works in Source or Ob-ject form.3. Grant of Patent License.Subject to the terms and conditions of this License, each Contributor hereby grants toYou a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (ex-cept as stated in this section) patent license to make, have made, use, offer to sell,sell, import, and otherwise transfer the Work, where such license applies only to thosepatent claims licensable by such Contributor that are necessarily infringed by theirContribution(s) alone or by combination of their Contribution(s) with the Work towhich such Contribution(s) was submitted. If You institute patent litigation againstany entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Workor a Contribution incorporated within the Work constitutes direct or contributory pat-ent infringement, then any patent licenses granted to You under this License for thatWork shall terminate as of the date such litigation is filed.4. Redistribution.You may reproduce and distribute copies of the Work or Derivative Works thereof inany medium, with or without modifications, and in Source or Object form, providedthat You meet the following conditions:1. You must give any other recipients of the Work or Derivative Works a copy of thisLicense; and2. You must cause any modified files to carry prominent notices stating that Youchanged the files; and3. You must retain, in the Source form of any Derivative Works that You distribute,all copyright, patent, trademark, and attribution notices from the Source form ofthe Work, excluding those notices that do not pertain to any part of the DerivativeWorks; and4. If the Work includes a "NOTICE" text file as part of its distribution, then any Deriv-ative Works that You distribute must include a readable copy of the attributionnotices contained within such NOTICE file, excluding those notices that do notpertain to any part of the Derivative Works, in at least one of the following places:within a NOTICE text file distributed as part of the Derivative Works; within theSource form or documentation, if provided along with the Derivative Works; or,within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informa-tional purposes only and do not modify the License. You may add Your own attri-158
bution notices within Derivative Works that You distribute, alongside or as an ad-dendum to the NOTICE text from the Work, provided that such additional attribu-tion notices cannot be construed as modifying the License.You may add Your own copyright statement to Your modifications and may pro-vide additional or different license terms and conditions for use, reproduction, ordistribution of Your modifications, or for any such Derivative Works as a whole,provided Your use, reproduction, and distribution of the Work otherwise complieswith the conditions stated in this License.5. Submission of Contributions.Unless You explicitly state otherwise, any Contribution intentionally submitted forinclusion in the Work by You to the Licensor shall be under the terms and condi-tions of this License, without any additional terms or conditions. Notwithstandingthe above, nothing herein shall supersede or modify the terms of any separatelicense agreement you may have executed with Licensor regarding such Contribu-tions.6. Trademarks.This License does not grant permission to use the trade names, trademarks, serv-ice marks, or product names of the Licensor, except as required for reasonableand customary use in describing the origin of the Work and reproducing the con-tent of the NOTICE file.7. Disclaimer of Warranty.Unless required by applicable law or agreed to in writing, Licensor provides theWork (and each Contributor provides its Contributions) on an "AS IS" BASIS,WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,including, without limitation, any warranties or conditions of TITLE, NON-IN-FRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. Youare solely responsible for determining the appropriateness of using or redistribut-ing the Work and assume any risks associated with Your exercise of permissionsunder this License.8. Limitation of Liability.In no event and under no legal theory, whether in tort (including negligence),contract, or otherwise, unless required by applicable law (such as deliberate andgrossly negligent acts) or agreed to in writing, shall any Contributor be liable toYou for damages, including any direct, indirect, special, incidental, or consequen-tial damages of any character arising as a result of this License or out of the use orinability to use the Work (including but not limited to damages for loss of good-will, work stoppage, computer failure or malfunction, or any and all other com-mercial damages or losses), even if such Contributor has been advised of the pos-sibility of such damages.9. Accepting Warranty or Additional Liability.While redistributing the Work or Derivative Works thereof, You may choose to of-fer, and charge a fee for, acceptance of support, warranty, indemnity, or other lia-bility obligations and/or rights consistent with this License. However, in acceptingsuch obligations, You may act only on Your own behalf and on Your sole responsi-159
bility, not on behalf of any other Contributor, and only if You agree to indemnify,defend, and hold each Contributor harmless for any liability incurred by, or claimsasserted against, such Contributor by reason of your accepting any such warrantyor additional liability.END OF TERMS AND CONDITIONSAppendix: How to apply the Apache License to your workTo apply the Apache License to your work, attach the following boilerplate notice,with the fields enclosed by brackets "[]" replaced with your own identifying informa-tion. (Don't include the brackets!) The text should be enclosed in the appropriatecomment syntax for the file format. We also recommend that a file or class name anddescription of purpose be included on the same "printed page" as the copyright noticefor easier identification within third-party archives.Copyright [yyyy] [name of copyright owner]Licensed under the Apache License, Version 2.0 (the "License"); you may not use thisfile except in compliance with the License. You may obtain a copy of the License athttp://www.apache.org/licenses/LICENSE-2.0Unless required by applicable law or agreed to in writing, software distributed underthe License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDI-TIONS OF ANY KIND, either express or implied. See the License for the specific lan-guage governing permissions and limitations under the License.Copyright © Widex A/S, 2017 - 2018. All rights reserved. Any unauthorized redistribu-tion or use of the software in source or binary form is prohibited and will be prosecu-ted when discovered.160

Navigation menu