Wiebetech Nbddv4 Users Manual Notebook DriveDock V4 User's

NBDDV4 to the manual 3ba78e37-98fe-4524-bf19-a992bfcc7136

: Wiebetech Wiebetech-Nbddv4-Users-Manual-479470 wiebetech-nbddv4-users-manual-479470 wiebetech pdf

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

Notebook DriveDock™ v4
USER’S MANUAL
Revised May 21, 2007

Features
• Dual, daisy-chainable FireWire ports
• USB 2.0 mini port
• Bus powered through FireWire, plus two options for
external power
• LEDs show when unit is receiving power as well as
power output status
• Host-detection LEDs indicate connection to either
FireWire or USB host

Installation Instructions
1. Check the accessories packaged with your Notebook DriveDock. Please contact WiebeTech if any items are
missing or damaged. The box should contain:
NBDDv4

NBDD8v4

Notebook DriveDock unit
FireWire 400 cable
Hard drive screws
Rubber bumpers
Manual and Warranty information

Notebook DriveDock unit
FireWire 800 cable
Hard drive screws
Rubber bumpers
Manual and Warranty information

1
1
4
6
(on CD)

1
1
4
6
(on CD)

2. Take a moment to familiarize yourself with the parts of your new Notebook DriveDock. This will aid you in
the remaining steps. (FireWire 400 ports will be FireWire 800 ports on NBDD8v4)

A +12V power input from optional AC
adapter
B DC input for 4-pin power connector
C USB 2.0 mini port
D Dual FireWire Ports
E Power switch (On / Off)

LEDs:
a
b
c
d
e
f

+12V DC power input is present
Unit is connected to USB host
Hard drive access
Unit is connected to FireWire host
4-pin power input is present
+5V Power output to drive

Notebook DriveDock v4 User Manual

-1-

WiebeTech LLC

3. Connect the hard drive to the dock. If you’ve removed the drive from a laptop computer, it may be inside a
mounting sleeve. You’ll need to remove this so that the drive will fit with the dock. Place the drive onto the green
plate with the label side up. Carefully slide the drive forward until the pins are fully inserted into the IDE connector. If
you wish, you may secure the drive in place with the included screws.

The upright pins
are not used in
this model.

4. Connect the FireWire or USB cable from your computer into the appropriate port on the DriveDock.
N
B
D
D
v
4

FireWire 400

5.

FireWire 800

USB

N
B
D
D
8
v
4

Connect power to the dock. There are three options:
a. The Notebook DriveDock can be bus powered through FireWire, and therefore does not require an
additional power source when used with powered FireWire hosts.
b. For USB usage, or to connect to FireWire hosts lacking sufficient bus power, plug in the optional AC adapter
(available from WiebeTech). When the AC adapter is connected, the LED labeled “+12” will illuminate.
c. Alternatively, you may supply power through a standard 4-pin Molex connector. When power is connected
in this way, the LED labeled “4 PIN” will illuminate.

Your DriveDock is now ready to use! Turn on the unit by moving the power switch toward the side labeled “|”. When
power is on, the output LED “+5” will illuminate to show that power is going to the hard drive.
The red LED access indicator will light briefly after the unit is powered up, indicating that the FireWire bridge has
successfully established communication with the drive. Thereafter, it will light whenever the drive is accessed. If
your hard drive is already formatted, you can begin using it right away. New hard drives will need to be formatted
before they can be used.

Notebook DriveDock v4 User Manual

-2-

WiebeTech LLC

Usage with Macintosh Computers
Compatibility
The Notebook DriveDock v4 is fully plug-and-play under Mac OS X. No drivers are needed. The USB 2.0 port is
USB 1.1 compatible.

Mounting and Ejecting Volumes
If the hard drive attached to the DriveDock is already formatted, an icon representing the drive’s
volume will appear (mount) on the desktop. You can begin using the volume right away. If the drive
is unformatted, a message will appear on the desktop saying that the disk is unreadable. You can
use OS X’s Disk Utility to easily format the drive.
Eject the volume before powering down the unit by dragging the volume’s icon to the trash bin, or by
selecting the volume then pressing Command-E.

Booting from your DriveDock
Some Macs support booting from a FireWire device. To activate this feature, you must first install OS X on the
external volume. The easiest way to do this is to clone an existing system drive using a utility such as Carbon Copy
Cloner or Super Duper. Next, go to System Preferences Æ Startup Disk. A window will list the available bootable
volumes. Select the volume from which you wish to boot. Another method is to hold down the Option key during
boot up. A screen should appear that allows you to select the volume you wish to use. This is useful if you wish to
boot from your dock only some of the time.

Usage with Windows Operating System
Compatibility
The Notebook DriveDock v4 is fully plug-and-play with Windows XP and Vista. No drivers are needed on these
operating systems. On systems running Windows 98SE or ME, the dock is plug-and-play through FireWire. The
USB2 port is USB 1.1 compatible.

Mounting and Ejecting Volumes
If the hard drive attached to the dock is already formatted, you can begin using the volume right away. When the
dock and drive are properly connected and turned on, a window may open to allow you
access to the volume. If no window appears, you can find the volume by double-clicking the
“My Computer” icon.
(Windows XP, Vista)

Eject the volume before powering down the unit by single-clicking the green arrow icon on the task bar, then selecting
“Safely remove….” Windows will indicate when it is safe to disconnect the dock.
Shutting down the unit without first ejecting the volume can result in data loss.
(Windows ME, 2000)

Notebook DriveDock v4 User Manual

-3-

WiebeTech LLC

Technical Specifications
Product Codes
Interface
Optional Power Supply
Power Input
Power Output
Power Switch
Host Indicators
Access Indicator
Operating Temperature
Operating Humidity
Bus Powering
Compatibility
Operating System

Shipping Weight
Dimensions
Warranty

NBDDv4, NBDD8v4
• FireWire 400 (NBDDv4) or 800 (NBDD8v4) using OXFW911
• USB 2.0 (backwards compatible with USB 1.1)
100-240VAC +12V / 3A (not included—WiebeTech Part # PWR-3)
(+12V): +12V DC Jack
(+12V / +5V): Standard disk drive 4-pin Molex power jack
+5V at 0.75A
On / Off
• FireWire host attached LED
• USB host attached LED
Provides visual indication of hard drive activity
50 – 85° Fahrenheit (10 – 30° Celsius)
5% to 95%, noncondensing
Converts FireWire bus power to +5V
2.5” PATA/ATAPI drives
• Windows XP
• Mac OS X
• Linux distributions that support FireWire
2 pounds (including accessories)
3.2” x 2.2” x 0.95” (81mm x 56mm x 24mm)
Dimensions are exclusive of attached plates, drives, and cables.
1-year limited warranty. See warranty statement for details and limitations. WiebeTech
offers free phone support for 90 days after purchase (1-866-744-8722). After 90 days,
email support is available at support@wiebetech.com.

Notebook DriveDock is a trademark of WiebeTech LLC. Other marks are the property of their respective owners.
© 2007 WiebeTech LLC. All rights reserved.

FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.”
Tested to comply
with FCC standards

FOR HOME OR OFFICE USE

In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1)
Ensure that the bottom plate and case of your attached drive is grounded, either to the DriveDock case or to an Earth ground.
2)
Use a FireWire cable with RFI reducing ferrites on each end.
3)
Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.

If you have any questions or problems, please contact support@wiebetech.com for technical support. If you are
interested in purchasing more WiebeTech products, check our website or contact sales@wiebetech.com. We
appreciate being able to serve you!

Notebook DriveDock v4 User Manual

-4-



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 4
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:82e68f18-2a7e-4928-b174-93be7fedd635
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Company                         : WiebeTech
Source Modified                 : D:20070521203605
Headline                        : 
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Modify Date                     : 2007:05:21 15:37:25-05:00
Create Date                     : 2007:05:21 15:36:57-05:00
Metadata Date                   : 2007:05:21 15:37:25-05:00
Document ID                     : uuid:ecbcd6ba-4b0b-4535-9410-e1a9e0327c63
Version ID                      : 7
Format                          : application/pdf
Title                           : Notebook DriveDock v4 User's Manual
Creator                         : WiebeTech
Subject                         : 
Tagged PDF                      : Yes
Author                          : WiebeTech

EXIF Metadata provided by EXIF.tools