Wiimu Information Technology A02 Wiimu WiFi Audio Module User Manual WiiMu WiFi spec

Wiimu Information Technology Inc. Wiimu WiFi Audio Module WiiMu WiFi spec

UserManual.wiki >

Wiimu Information Technology >

A02 User Manual >

Contents

1. Manual
2. Addendum

Manual

WiFi and Ethernet Shield With WiFi Audio User Manual Rev 1.0 MAY 25, 2013 Copyright © 2013 WiiMu Information Technology Inc.

WiiMu Information Technology Inc. Number WMB20130110 Doc Title WiiMu-A02 WIFI Audio Specification Version 1.2 Document No.: WMB20130110 Page 2 of 15 HISTORY Version Date Description Author K8

WiiMu Information Technology Inc. Number WMB20130110 Doc Title WiiMu-A02 WIFI Audio Specification Version 1.2 Document No.: WMB20130110 Page 3 of 15 INDEX Features .......................................................................................................................................................................5 1.1. Parameters...............................................................................................................................................6 2. Hardware Description .................................................................................................................................7 2.1. Description of hardware interface...........................................................................................................7 2.2. Mechanical dimension .............................................................................................................................9 2.3. Audio output ............................................................................................................................................9 2.4. External antenna ....................................................................................................................................10 2.5. 10/100M Ethernet Port .......................................................................................................................... 11 2.5.1. Connect the module with RJ45 with transformer .............................................................................. 11 2.5.2. Transfer the data from the module to user board via Ethernet interface directly............................... 11 2.6. USB host port ........................................................................................................................................ 12 2.7. Power supply .........................................................................................................................................13 2.8. Status LED.............................................................................................................................................13 3. Software ....................................................................................................................................................14 3.1. Airplay introduction...............................................................................................................................15 3.2. DLNA introduction................................................................................................................................15 3.3. WiFi mode .............................................................................................................................................15 3.3.1. AP Client mode .......................................................................................................................15 3.4. Web Server setup ...................................................................................................................................16

WiiMu Information Technology Inc. Number WMB20130110 Doc Title WiiMu-A02 WIFI Audio Specification Version 1.2 Document No.: WMB20130110 Page 4 of 15 Features  Support 802.11 b/g/n networks  Support 10/100Mbps Ethernet  Standard WiFi and Ethernet Shield two in one  Support Internet audio streaming via Apple Airplay or DLNA  Support TCP/IP/UDP protocol  Support STA/AP/AP Client mode  Support UART and Ethernet Interface  Support audio output via 3.5mm audio jack  Built-in web server to easily configure the module  Support WiFi UART via AT command Applications  WiFi speaker  WiFi audio docking station for smartphones  WiFi remote control  Portable WiFi base station with Airplay  WiFi/Ethernet shield two in one for Arduino

WiiMu Information Technology Inc. Number WMB20130110 Doc Title WiiMu-A02 WIFI Audio Specification Version 1.2 Document No.: WMB20130110 Page 5 of 15 1. Overview WiiMu-A02 module is developed by Wiimu Information Technology Inc. It could be used in wireless speaker, wireless docking station, WiFi base station and WiFi remote control. It supports 802.11b/g/n standard with up to 150Mbps bandwidth. It could work at AP, AP client or station modes. It is fully compatible with Apple Airplay and digital living network alliance (DLNA) streaming standards. With this module, you can play the music on your speaker wirelessly from iPhone, iPad , iPod touch, Android devices or PC devices. 1.1. Parameters Items Performance Certification FCC/CE Standard 802.11 b/g/n Frequency 2.412GHz-2.484GHz 802.11b: +20dBm(Max.) 802.11g: +18dBm(Max.) Transmit 802.11n: +15dBm(Max.) 802.11b: -89dBm 802.11g: -81dBm Receive sensitivity 802.11n: -71dBm ExternalI-PEX Wireless Antenna options Internalon board antenna Work voltage 5.0V (+/-5%) Work current 170mA~300mA Work temperature -25 - 85 Storage temperature -40 - 135 Hardware Size 33×48×3mm 28-pin SMT WiFi working mode AP Client (by default)/AP/STA Security WEP/WPA-PSK/WPA2-PSK/WAPI Encryption WEP64/WEP128/TKIP/AES User Configuration Web server Software Update Web server AirPlay Software Audio streaming protocol DLNA Table 0-1 WiiMu-A02 parameters

WiiMu Information Technology Inc. Number WMB20130110 Doc Title WiiMu-A02 WIFI Audio Specification Version 1.2 Document No.: WMB20130110 Page 6 of 15 2. Hardware Description 2.1. Description of hardware interface WiiMu-A02 module provides two options to connect with customer board either through its 28-pins DIP or SMT pads. 5VDnReadynReloadSPI_CLKSPI_MOSISPI_MISOUART_RXDUART_TXDGNDGNDnRST1V8_OutputOUT_RAGNDOUT_L5VDSPI_CS1GPIO_19GPIO_20Eth_TX+Eth_TX-Eth_RX-Eth_RX+USB-USB+RF ConnectorANT5VD GND GND OUT_L AGND OUT_R12141312111098765431516171819202122232425262728ReservedReservedReserved Figure 2-1 WiiMu-A02 interface pins

WiiMu Information Technology Inc. Number WMB20130110 Doc Title WiiMu-A02 WIFI Audio Specification Version 1.2 Document No.: WMB20130110 Page 7 of 15 Pin description Pin Description Net Type Comments 6,7 GND GND Power Ground 15,16 5VD 5VD Power +5V@ 350mA 1 SPI data SPI_MISO I/O 2 SPI data SPI_MOSI I/O 3 SPI clock SPI_CLK I/O 17 SPI chip select SPI_CS1 I/O SPI interface is configured to work in master mode, can be used to connect SD card or other SPI slave devices 4 Module ready signal nReady O,IPU Module finishes the boot-up and is ready to workoutput “0”; Otherwise, output “1”. 5 Module reset nRST I,IPU Reset with pull down, reset time >300ms 8 UART data receive UART_RXD I,IPD 9 UART data send UART_TXD O,IPD UART 10 Reset factory setting nReload I,IPU Pull down for more than 5 seconds then pull up, reset the module with factory setting. 11 Output 1.8V 1V8_Output O 1.8V@300mA, used for Ethernet interface 12 Audio output-R OUT_R A 13 AGND AGND Power 14 Audio output-L OUT_L A Audio output ports 18 Reserved pin Reserved I/O, IPD Reserved, keep float 19 GPIO GPIO_19 I/O, IPD 20 GPIO GPIO_20 I/O, IPD 21 Reserved pin Reserved I/O, IPD Reserved, keep float 22 Reserved pin Reserved I/O, IPD Reserved, keep float 23 Ethernet Output+ PHY_TX+ O 24 Ethernet Output- PHY_TX- O 25 Ethernet Input- PHY_RX- I 26 Ethernet Input+ PHY_RX+ I 1.8V TTL interface (module provides 1.8V reference voltage via Pin11) 27 USB input- USB- I 28 USB input+ USB+ I USB 2.0 host interface Table 2-1 WiiMu-A02 module pin description Notes 1. I: Input, O: Output, P: Power, IPU: Internal Pull Up, IPD: Internal Pull Down, A: Analog. Meanwhile,WiiMu-A02 module could work in standalone mode. There are two three pin breakouts that could connect with 5V voltage input and stereo audio output.

WiiMu Information Technology Inc. Number WMB20130110 Doc Title WiiMu-A02 WIFI Audio Specification Version 1.2 Document No.: WMB20130110 Page 8 of 15 2.2. Mechanical dimension WiiMu-A02 module has the physical dimension of 33 x 48mm. The detailed layout shows below. The unit is in mm. Figure 2-2: WiiMu-A02 physical dimension 2.3. Audio output WiiMu_A02 module has integrated a high quality audio codec IC with the following performance parameters:

WiiMu Information Technology Inc. Number WMB20130110 Doc Title WiiMu-A02 WIFI Audio Specification Version 1.2 Document No.: WMB20130110 Page 9 of 15 Table 2-3 Audio output parameters 2.4. External antenna WiiMu-A02 provides two antenna options for different customer applications. The user could use either internal or external antenna. To use external antenna, please choose the antenna type that meets the requirement of IEEE 802 b/g/n WiFi standard running at 2.4GHz frequency. The detailed parameters are shown in the table below. Items Parameters Frequency range 2.4~2.5GHz Impedance 50 Ohm VSWR 2 (Max) Reflection loss -10dB (Max) Connector I-PEX or populate directly Table 2-5 WiiMu-A02 external antenna parameters

WiiMu Information Technology Inc. Number WMB20130110 Doc Title WiiMu-A02 WIFI Audio Specification Version 1.2 Document No.: WMB20130110 Page 10 of 15 2.5. 10/100M Ethernet Port WiiMu-A02 module provides 10/100Mbps Ethernet interface pins that could be used to connect with Ethernet RJ45 socket via transformer. On the other hand, it could be used to transfer data from the module to the customer base board directly via PHY-to-PHY connection. Moreover, the module also provides the 1.8V reference voltage for the Ethernet transformer. 2.5.1. Connect the module with RJ45 with transformer To provide 10/100Mbps Ethernet functionality, you could connect the module with the RJ45 socket via a Ethernet transformer. The detailed diagram is as follows: Figure 2-4 The reference design of Ethernet via transformer 2.5.2. Transfer the data from the module to user board via Ethernet interface directly The Ethernet interface could be used to transfer data from the module to customer board through Ethernet interface. It could save one transformer, one the RJ45 socket and PCB space. The reference circuit diagram is shown below. The voltage (VCC_PHY) in the figure depends on the PHY chip in the customer board, usually it requires 2.5V power input.

WiiMu Information Technology Inc. Number WMB20130110 Doc Title WiiMu-A02 WIFI Audio Specification Version 1.2 Document No.: WMB20130110 Page 11 of 15 Table 2-5 The reference design of Ethernet 2.6. USB host port WiiMu_A02 module provides high speed USB2.0 host interface. To connect with USB port, the reference design is shown below. Figure 2-6 USB host interface Please follows the following design rule to populate the USB host interface: Item Parameter Signal Group USB Topology Differential Pair Point-to-Point Reference Plane Ground Referenced Characteristic Trace Impedance (Zo) 90 Ω ±10% Trace Width 4 mils Serpentine Spacing(center to center) 8.5 mils Minimum Isolation Spacing to Clock Signals 50 mils

WiiMu Information Technology Inc. Number WMB20130110 Doc Title WiiMu-A02 WIFI Audio Specification Version 1.2 Document No.: WMB20130110 Page 12 of 15 Minimum Isolation Spacing to Low-Speed Signals 20 mils Minimum Isolation Spacing to other USB Pair 20 mils Total Length (with package length) Max = 8000 mils Maximum Recommended Via Count 2 (per side) DM to DP Length Matching(with package length) Match total length to within ±10 mils Table 2-6 WiiMu-A02 USB design rule 2.7. Power supply WiiMu-A02 module is powered with single 5V power supply. The peak current is around 350mA, the normal working current is 200mA. In sleep mode (when WiFi is off), the current is 100mA. The power supply is important for system stability and WiFi performance. It is recommended to use 100uF and 10uF decoupling capacitor in parallel to reduce the ripple of power supply. 2.8. Status LED WiiMu-A02 module provides four status LEDs as the follows: 1. Power supply status 2. WiFi AP status 3. WiFi station status 4. WiFi data transfer status Status LED of the WiiMu-A02 module: LED status Description AP LED off WiFi AP is waiting for connection AP LED on WiFi AP has the device that connected to the module Client LED off WiFi AP Client is not connected to any router Client LED on WiFi AP Client is connected to router, however, it is not connected to Internet yet Client LED blinking WiFi AP Client is connected to router and connected to Internet too Power LED on WiFi is in boot-up procedure Power LED blinking slowly ( on: 1 second, off: 1 second) WiFi is running normally Power LED blinking fast (on: 0.3 second, off: 0.3 second) The system is in the process of updating firmware. Please don’t disconnect the power. Otherwise, the system may be corrupt.

WiiMu Information Technology Inc. Number WMB20130110 Doc Title WiiMu-A02 WIFI Audio Specification Version 1.2 Document No.: WMB20130110 Page 13 of 15 WiFi data LED on The WiFi data transfer is ongoing Table 2-7 WiiMu-A02 status LEDs 3. Software WiiMu-A02 supports Airplay and DLNA functionality: Items Description iOS version  iOS 4.2 and above  iPhoneiPadiPod TouchiPad Mini iTune version  iTunes 10.2 and above  PC, iMac Network setup  WiiMu-A02 work in AP Client mode  Support WPS Support Airplay mode  Play, Pause, Seek, Volume, Prev, Next Support Airplay applications  Apple Music App.  QQ Music  iTunes  Many music applications … Support DLNA operations  Play, Pause, Seek, Volume, Prev, Next Support DLNA applications  Compatible with DLNA certified player, i.e.,  Skifta  BubbleUPnP Supported browser  PCIE9/10 Chrome, Firefox  iOS/MAC OS Safari Supported language of Web server  Chinese  English Setup with web server  Setup WiiMu-A02 network  Setup WiiMu-A02device name, add password protection  Update WiiMu-A02firmware and restore factory setting Table 3-1 WiiMu-A02 Software description

WiiMu Information Technology Inc. Number WMB20130110 Doc Title WiiMu-A02 WIFI Audio Specification Version 1.2 Document No.: WMB20130110 Page 15 of 15 Figure 3-1 WiiMu-A02 AP Client mode 3.4. Web Server setup WiiMu-A02 module provides Web server to let user configure the module via the browser. In the factory mode, the SSID of WiiMu-A02’s AP port is in the form of WiiMu _AP_xxxx. The xxxx represent 4 digital numbers. The IP address, user name and password are shown below: r Parameters Default setting SSID WiiMu _AP_xxxx IP address 10.10.10.254 Mask 255.255.255.0 DNS WiiMu.com User name admin Password admin Table 3-2 WiiMu-A02 AP default parameters You could use PC, iOS or Android device connect the WiiMu-A02 first as wireless AP, then launch the browser and login to web server and configure the module.