Willis Electric AL99A Controller For LED Tree User Manual 00

Willis Electric Co., Ltd. Controller For LED Tree 00

User Manual

PARTABCTree(“A-1”)Tree(“A-2”)Tree(“A-3”)111D Tree(“A-4”) 1ETree(“B-1”) 1FTree(“B-2”) 1GTree(“B-3”) 1HITree(“B-4”)Tree(“C-1”)11JTree(C-2”) 1KTree(“D”) 1LRemote 2MController 1NOClip-Clasp 80Rope(1.8m) 3PRope(2.5m) 2QRSTUVGround StakeAudio CablePowerPower CordCable TiesLight String(“L1”-“L12”)52115013(1spare)DESCRIPTION QUANTITYsize: 21*28.5(cm)7.5 Feet Show Tree(White LED)Instruction Manual PACKAGE CONTENTS PACKAGE CONTENTSBefore beginning assembly of product, make sure all parts are present.Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble install or operate the product.ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS HANG UP THE LED LIGHTScan & See Me!www.ishowtree.comSanc QR code to download instruction vedio1. The first layer 3. The third layer3. The fourth layer2. The second layer 5. Put the finished second layer onto the first layer6. Put the third & fourth layer onto the first two layersHang up the LED light with corresponding number on the tree top and fix it tightly with the clip claspHang up controller on the treea：Animationb：Glitterc：Wavingd：Ribbone：Twinklef：Snowingg：Flickeringh：Combinationi：OFFj：Music1. Short press of on the controller to change function.2. When press and hold the button for over 1.5s on the controller, the light on the product will show a number(2, 4, 6, 8), which indicate the timing pattern you would like to choose. Release the button when you see the desire timing pattern. Please refer to below timer pattern.PowerInput MusicOut SpeakerREMOTERemote Control Instructions1. Remove insulating tape from the battery compartment before use. This remote is infrared and receiving distance allowance is 15 meters.Battery Installation:1. Unscrew battery cover off. 2. Insert a "A23" (12 volt) battery.Note:Timer will be disabled when power off.Timer Function:1): 2h tree light on / 22h tree light off(recycle every day)2): 4h tree light on / 20h tree light off(recycle every day)3): 6h tree light on / 18h tree light off(recycle every day)4): 8h tree light on / 16h tree light off(recycle every day)2. is the buttons to change the function.a：Music Dancingb：Auto Combinationc：Warm White Steady-on, Multi-Cascaded：Warm White Steady-on, Multi Fade-in & Fade-oute：Warm White Fade-in & Fade-out, Multi Steady-onf： Steady-ong：Warm White Steady-onh： Multi Steady-oni：Warm White Steady-on, Multi Twinkle j：Warm White Twinkle, Multi Steady-onk：Warm White Steady-on, Multi Random Twinklel：Fade-in & Fade-out CONNECT CONTROLLER WITH LIGHT STRING CONNECT CONTROLLER WITH LIGHT STRING CONTROLLERASSEMBLY GROUND STAKE TROUBLESHOOTINGPROBLEM POSSIBLE CAUSE CORRECTIVE ACTIONLight string pattern appears in wrong orderRemote control does not functionLight string flashes incorrectlyLight strings are assembled in wrong orderLow batteryInsulating tape not removedReplace new batteriesPull out insulating tapeReplace with spare light stringLight string might be damagedMake sure to hang light strings with corresponding number on tree topUse rope( ) and( )to fix tree on ground with ground stakes( )as shown belowL1 L1L2 L2L3 L3L4 L4L5 L5L6 L6L7 L7L8 L8L9 L9L10 L10L11 L11L12 L12Power PowerIndicatorLightConnect controller to the corresponding light stringIf the remote control does not work, check battery.Battery installation:1. Use Phillips screwdriver to open the back cover of the remote control.2. Replace with a new alkaline “A23G” (12 volt) battery into the compartment.WARNING: This is not a toy and is not intended for use by children.(A) Do not dispose of the battery in fire as the battery may leak and explode.(B) Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.(C) Exhausted batteries are to be removed from the product.(D) Do not expose the Remote Control to moisture.(E) Dispose of battery properly by following directions on battery.(F) Use only 12v alkaline battery type A23G of replacement, use of other battery may damage remote.(G) Safe for indoor use.WARNING:FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTFCC Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.INDUSTRY CANADA CONFORMITY STATEMENTThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.CAN ICES-005(B)/NMB-005(B)“Power”Connect “Power”0849490#

Navigation menu