Wind Crest Wer364Sh Users Manual SpecsWER24_120705

WER364SH to the manual fb0c67f5-3fe8-46bc-a977-3dac50e48366

: Wind-Crest Wind-Crest-Wer364Sh-Users-Manual-479712 wind-crest-wer364sh-users-manual-479712 wind-crest pdf

Open the PDF directly: View PDF .
Page Count: 2

Copyright 2006 Wind Crest by CNP Industries 1

Install Quick Specs are for planning purposes only. Please refer to the detailed installation instructions, prior to

making any cutouts.

Wall Mounted Hoods – Install Quick Specs

WER Series Hoods - 24” Depth

Installation Type & Discharge Direction

Wall – vertical discharge

Discharge Size off Hood Top

14” x 4 1/4” rectangular

Discharge Transition – purchased

separately

See “Ventilation” section for options

Standard Features

• 304 Series, 18 gauge stainless steel

• Halogen lighting (dual 50 watt lamps 36” to

48” widths/four 50 watt lamps 60” width –

with Hi/Lo setting

• Dishwasher safe, heavy aluminum mesh

filters

• All Stainless Steel Finish Hoods can be

installed Indoors or Outdoors (see

Installation Instructions)

• Widths: 36”, 42”, 48” and 60”

Finishes

• Stainless Steel (S), White (W), Essence of

Copper (E) and Pewter (P)

Optional Upgrades

• 250 Watt Heat Lamp Fixtures (add “H” to

hood model number) e.g. WER364SH

• 6” or 12” Canopy Extensions in matching

finish (Model(s): 6EC36S or 12EC36S for

36” wide hood in stainless steel finish).

NOTE: Specify desired canopy height,

width and finish when ordering.

• Chrome or Brass Rolled Pot Rails

(Model(s): ACCBRC or ACCBRB) – indoor

use only

• Stainless Steel Back Splash with drop-

down chrome racks supports a maximum

of 30 lbs. (BS plus width – e.g. BS36)

Hood Carton Weight:

WER364 = 58 lbs. WER484 = 72 lbs.

WER424 = 65 lbs. WER604 = 85 lbs.

width minus

21"

12"

3"

24"

18"

36, 42, 48, 60"

Wiring Access

1"

14"

C

L

U

LU

L

LISTED 7Z66 C

= width of hood

13"

WER Hoods

“BS” Warming Shelf

A

ccessor

y

with Chrome Racks

Copyright 2006 Wind Crest by CNP Industries 2

Install Quick Specs are for planning purposes only. Please refer to the detailed installation instructions, prior to

making any cutouts.

Wall Mounted Hoods – Install Quick Specs

WER Series Hoods - 24” Depth (cont.)

Maximum Power Supply Required*

15 Amps @ 120 V AC, 60 Hz

20 Amps @ 120 V AC, 60 Hz (when used with

VEN150E remote ventilator)

*Electrical rating is maximum required for any

combination of ventilator, lighting and heat

lamps.

Outdoor Electrical Requirements

Damp outdoor installations require a fault

interrupter circuit connection.

Hood Lighting Rating

• 36” to 48” widths: 100 watts w/halogen

lights or 600 watts w/halogen + heat lamps

• 60” width: 200 watts w/halogen lights

or 700 watts w/halogen + heat lamps

Ventilator Options

640 CFM, Internal Blower: VEN060I**

1000 CFM, Remote Blower: VEN100E

1500 CFM, Remote Blower: VEN150E

Ventilator Motor Ratings

VEN060I: 2.8 Amps @ 120 V AC, 60 Hz**

VEN100E: 8 Amps @ 120 V AC, 60 Hz

VEN150E: 12 Amps @ 120 V AC, 60 Hz

**Two VEN060I internal ventilators can be installed

in WER 60” wide hood. This installation requires

part #10220 dual wire harness. Refer to installation

instructions for full details.

Ventilator Dimensions & Accessory

Transitions (see Ventilator section)

CUSTOMER SPECIFICATION:

Hood Width Specified & finish:

(e.g.WER364S)

Add Keep Hot Lamps: (e.g. WER364SH)

Accessories Selected: (e.g. Back splash with

racks, chrome or brass rails, canopy

extensions)

= width of

6", 12"

12"

hood top

Center Support

48, 60" Models

Chrome/Brass

Rolled Pot Rail

1-7/8"

3/4"

Final Hood Model Selected:

Add Any Accessories:

Specify Ventilator Selected & Transitions:

_____________________________________

“EC” Canopy Extensions (6” or 12” height) for WER hoods