Windcave BRF300 Secure Vending Reader User Manual BRF300 HardwareGuide v0 3

Download:
Mirror Download [FCC.gov]
Document ID	3437779
Application ID	UrEsuFkhZhP1Pl52UADsQg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	73.82kB (922726 bits)
Date Submitted	2017-06-23 00:00:00
Date Available	2017-06-23 00:00:00
Creation Date	2017-05-31 09:03:54
Producing Software	Acrobat Distiller 9.5.5 (Windows)
Document Lastmod	2017-05-31 09:04:29
Document Title	Microsoft Word - BRF300_HardwareGuide_v0.3
Document Creator	PScript5.dll Version 5.2.2
Document Author:	User

Payment Express® BRF300
Hardware Guide
Version 0.3
DOCUMENT REVISION INFORMATION
Version
0.1
0.2
0.3
Revision Information
Initial version.
RELATED DOCUMENTS
Version
Document Title
COPYRIGHT
© Copyright 2017, Payment Express Limited
33 Wilkinson Road, Ellerslie
PO Box 8400
Auckland, 1150
New Zealand
www.paymentexpress.com
All rights are reserved. No part of this work may be reproduced or copied in any form or by any means, electronic or
mechanical, including photocopying, without the express written permission of Payment Express Limited.
PROPRIETARY NOTICE
The information described in this document is proprietary and confidential to Payment Express Limited. Any unauthorised
use of this material is expressly prohibited except as authorised by Payment Express Limited in writing.
CONTENTS
Document Revision Information .......................................................................................................................................... 2
Related Documents ............................................................................................................................................................. 2
Copyright ............................................................................................................................................................................. 3
Proprietary Notice ............................................................................................................................................................... 3
Overview ...................................................................................................................................................................... 1
BRF300 ANTENNA LANDSCAPE ASSEMBLY (AB0163) ........................................................................................... 1
2.1
Dimensions ............................................................................................................................................................ 2
2.2
Machine CutOut ..................................................................................................................................................... 3
BRF300 ANTENNA PORTRAIT ASSEMBLY (AB0164) .............................................................................................. 4
3.1
Dimensions ............................................................................................................................................................ 5
3.2
Machine CutOut ..................................................................................................................................................... 6
Installation .................................................................................................................................................................... 7
Secure Acceptance ...................................................................................................................................................... 9
5.1
Serial Numbers ...................................................................................................................................................... 9
5.2
Sign of Tampering .................................................................................................................................................. 9
Maintenance ................................................................................................................................................................ 9
6.1
Tradeouts & Deactivation Process ......................................................................................................................... 9
Appendix .................................................................................................................................................................... 10
7.1
Contact Payment Express .................................................................................................................................... 10
1
1 OVERVIEW
The BRF300 contactless antenna is an optional receiver that can be plugged into the SCR300 to support contactless
payments (e.g. Visa PayWave, MasterCard PayPass, Amex ExpressPay). The BRF300 also supports closed loop
proprietary payment cards such as MiFare RFID. The BRF300 can also be used as a standalone device.
The Payment Express BRF300 solution comes in two models. The only difference is mounting orientation. One
landscape and one portrait.
2 BRF300 ANTENNA LANDSCAPE ASSEMBLY (AB0163)
Hardware Overview

The BRF contactless antenna is an optional
receiver that can be plugged into the SCR to
support contactless payments (e.g. Visa
PayWave, MasterCard PayPass, Amex
ExpressPay).

Supports closed loop proprietary payment cards
(e.g. MiFare)

32-Bit Cortex M3 120MHz processor


Display LEDs x4
Landscape design.
Physical Link Interface

Connection with the SCR300 unit is via the attached cable located on the back of the BRF300 unit.
Power Requirements
The device accepts DC regulated from +9VDC to +45V SEL (Safety Extra Low Voltage).
Operating & Storage Temperature Ratings
Storage: -35 to 80 degrees (Celsius)
Operating: -25 to 75 degrees (Celsius)
Additional Comments
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
2
2.1
DIMENSIONS
3
2.2
MACHINE CUTOUT
4
3 BRF300 ANTENNA PORTRAIT ASSEMBLY (AB0164)
Hardware Overview

The BRF contactless antenna is an optional
receiver that can be plugged into the SCR to
support contactless payments (e.g. Visa
PayWave, MasterCard PayPass, Amex
ExpressPay).

Supports closed loop proprietary payment cards
(e.g. MiFare)

32-Bit Cortex M3 120MHz processor


Display LEDs x4
Portrait design.
Physical Link Interface

Connection with the SCR300 unit is via the attached cable located on the back of the BRF300 unit.
Power Requirements
The device accepts DC regulated from +9VDC to +45V SEL (Safety Extra Low Voltage).
Operating & Storage Temperature Ratings
Storage: -35 to 80 degrees (Celsius)
Operating: -25 to 75 degrees (Celsius)
Additional Comments
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
3. This device may not cause harmful interference, and
4. This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
5
3.1
DIMENSIONS
6
3.2
MACHINE CUTOUT
7
4 INSTALLATION
Part
Description
Quantity
BRF300 Antenna
Customer equipment with BRF300 mounting cut-out (see X and X).
Sheet Metal BRF300 Mounting Plate
Nut M4 Flange Serrated
BRF300 Controller Only
Screw M4 x 8mm Cap 3.0mm Hex SS304
Silicone BRF300 Controller Plug Bung
BRF300 Power & Comms Cable, 700mm
Silicon BRF300 Controller Plug Cover
8
9
5 SECURE ACCEPTANCE
The BRF300 solution is a secure payment device and therefore before any units are installed the customer must check
the following.
5.1
SERIAL NUMBERS
Each BRF300 device has their own unique serial number. Upon receiving the unit, the customer must check to ensure
that the serial number on the box matches the serial number on the unit.
Any discrepancies need to be reported to Payment Express (see appendix 7.1 for contact numbers).
5.2
SIGN OF TAMPERING
Customers need to check each unit for signs of tampering.
The following should be checked:

The exterior of the device should have no (new) holes, signs of adhesives or stickers other than the device label.

The device label should be straight and smooth.

LED lights. The 4 green LED’s will blink 3 times on power up if tampered.
Any signs of tampering or concerns must be reported to Payment Express (see appendix 7.1 for contact numbers).
6 MAINTENANCE
6.1
TRADEOUTS & DEACTIVATION PROCESS
In the event that the BRF300 devices need to be swapped out or deactivated, please follow instructions below.
1.
2.
3.
Call Payment Express Support to log a ticket (see appendix 7.1 for contact numbers). Please provide the
following information.

Serial Number of BRF300 device(s).

Brief description of fault / reason for deactivation.

Contact Name.

Contact Phone Number.

Shipping Address (for replacement if needed).
Physically remove the device(s).
Ship the device(s) back to Payment Express.
10
7 APPENDIX
7.1
CONTACT PAYMENT EXPRESS
Phone
International
+64 9 309 4693
Australia
1 800 006 254 or +61 2 8268 7700
Hong Kong
+852 3 678 6766
New Zealand
0800 PAYMENT (729 6368) or 09 309 4693
Singapore
+65 3 158 1353
South Africa
+27 10 500 8784
United Kingdom
+44 (0) 20 3176 5551
USA
+1 310 670 7299
E-mail
Sales
sales@paymentexpress.com
Support
support@paymentexpress.com
Dev Support
devsupport@paymentexpress.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : User
Create Date                     : 2017:05:31 09:03:54+12:00
Modify Date                     : 2017:05:31 09:04:29+12:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:05:31 09:04:29+12:00
Format                          : application/pdf
Title                           : Microsoft Word - BRF300_HardwareGuide_v0.3
Creator                         : User
Document ID                     : uuid:2b592213-cfc9-4017-ad26-e5f25e3d985f
Instance ID                     : uuid:095f063b-c324-4362-9b4f-4a60b2f3257b
Page Count                      : 14

EXIF Metadata provided by EXIF.tools