Winegard WF3000 WiFi Extender Product User Manual Exhibit D Users Manual per 2 1033 b3

Winegard Company WiFi Extender Product Exhibit D Users Manual per 2 1033 b3

Exhibit D Users Manual per 2 1033 b3

Download: Winegard WF3000 WiFi Extender Product User Manual Exhibit D Users Manual per 2 1033 b3
Mirror Download [FCC.gov]Winegard WF3000 WiFi Extender Product User Manual Exhibit D Users Manual per 2 1033 b3
Document ID3082672
Application ID00CaPcHWZ3HIE3i8t+d+Jg==
Document DescriptionExhibit D Users Manual per 2 1033 b3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize32.04kB (400508 bits)
Date Submitted2016-08-01 00:00:00
Date Available2016-08-01 00:00:00
Creation Date2016-06-01 16:20:54
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2016-06-01 16:20:54
Document TitleExhibit D Users Manual per 2 1033 b3
Document CreatorMicrosoft® Word 2013
Document Author: Andrew Busse

WINEGARD
Quick Start Guide
Model WF-3000
1) Connecting a device to the WF-3000
A. Scan for wireless
B. Choose the
networks with your device.
Select the Winegard
Connect Network listed on
the label on the back of the
WF-3000 after the Default
SSID.
Winegard Connect.
Once selected, the
WF-3000 will ask for
a Password. Enter
the Default
Password listed on
the back of the WF3000.
C. Now that the device is connected to the WF-3000,
open an internet browser and enter 10.11.12.1 into
the address bar.
2) Logging in
Log in using:
Username: admin
Password: admin
3) Scanning for available internet
A. Navigate to the home screen
and select “Scan for available
internet”.
B. Available networks will be scanned
and displayed in a list sorted by signal
strength.
C. Select the desired network and click
continue. Enter the network password if
needed. Some networks will display a
“Splash Page” when connecting. Once
the WF-3000 connects, open a new
browser and the network will display the
page pictured left.
D. Once “Internet Status”
shows Connected to the
chosen network, (this could
take as long as two minutes)
the system is ready to
browse.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
methods:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and devices.
 Connect the equipment into an electrical outlet on a circuit
different from that which the radio receiver is connected.
 Consult the dealer or an experienced radio/TV technician
for help.
FCC Caution
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
Only channel 1~11 can be operated. Selection of other channels is not
possible.
This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 25cm between the radiator and your body.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter except in accordance with
FCC multi-transmitter product procedures.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : en-US
Tagged PDF                      : Yes
Author                          : Andrew Busse
Creator                         : Microsoft® Word 2013
Create Date                     : 2016:06:01 16:20:54-05:00
Modify Date                     : 2016:06:01 16:20:54-05:00
Producer                        : Microsoft® Word 2013
EXIF Metadata provided by EXIF.tools
FCC ID Filing: C3DWF3000

Navigation menu