Winegard Ma1000W Users Manual 2452013

MA1000W to the manual 4e6f36e6-b0f9-435e-af12-7bd7274cd223

: Winegard Winegard-Ma1000W-Users-Manual-479795 winegard-ma1000w-users-manual-479795 winegard pdf

Open the PDF directly: View PDF .
Page Count: 5

1

CAUTION: This system is not for use with antenna in raised position

while vehicle is in motion.

Model MA1000W has white antenna head and white turret.

Unit packed as follows:

Motorized Mount with booms attached.

Antenna Head

Hardware Bag

Instructions

Antenna Power Supply

Power Cable

Control Cable

Coax Cable

WINEGARD

MOTORIZED SENSAR ANTENNA

Model MA1000W

MADE IN U.S.A.

(Sensar® III head - U.S. Patent D500,496 and Patent Pending)

OPERATION MANUAL

®

®

2

Operation Instructions for Motorized Sensar

FIGURE 1

Controller

Panel

Control Panel Light and Button Functions:

(All three lights blink when obstruction occurs - See Trouble

Shooting)

Figure 1 shows control panel components. Operation is

simply a matter of pressing the button for the operation you

desire.

OPERATION

STEP 1: Press Power Button, light by button will come on.

One of the three middle lights will also turn on showing

antenna position.

STEP 2: Turn on power supply to antenna.

STEP 3: Press Raise/Stow Button. Motion light will turn on

and antenna will raise. When antenna has raised, the

motion light will turn off and the raised light will be on.

STEP 4: Press ROTATE counter clockwise button to rotate

unit towards signal. Motion light will turn on. You must hold

this button in to maintain rotation. View your TV Picture and

release button to stop antenna rotation when TV picture

appears to be the best quality for your location. NOTE: If

pressing button does not turn on Motion light, the antenna is

at it's maximum rotation or not in up position.

STEP 5: To view a different TV channel, switch TV to

channel you desire and press and hold either rotate button

until your TV picture appears to be the best quality for your

location.

To Stow Antenna:

STEP 6: Push RAISE/STOW button to stow antenna.

MOTION LED will be lit. The antenna will automatically

return to its home position before stowing. MOTION LED

will turn off. STOWED LED will turn on.

STEP 7: Push POWER Button on control panel and ON/

OFF button on wall plate power supply to turn antenna off.

NOTE: BEFORE MOVING RV, ANTENNA MUST BE IN

STOWED POSITION. VISIBLY CONFIRM ANTENNA IS

DOWN BEFORE MOVING.

Turn Power

On/Off

Rotate

Antenna

Clockwise

Raise/Stow

Antenna

Indicates Antenna

is fully raised

Indicates Antenna

is moving

Indicates Antenna is

in Travel Position

Rotate Antenna

Counter Clockwise

NOTE: Blinking lights

indicate obstruction.

3

Trouble Shooting

No power light after pressing power button.

Antenna won't raise. The Up, Motion, Down lights

blink after pressing Up/Down Button.

a. Check that 12VDC power source is on. –fix power, if OK, go to step b.

b. Remove Control Panel, remove power cable and check for 12VDC across

red and black wires. – if OK, go to step c.

c. Replace Control Panel. – Still doesn't work, go to D.

d. Contact your Dealer or Winegard Company.

PROBLEM SOLUTION

a. Check for obstructions that prevent antenna head from raising.

Examples tree branches, snow or ice, etc.

Antenna won't rotate when fully raised. a. Check for obstructions that prevent antenna head from rotating.

Examples tree branches, snow or ice, etc.

b. Check that antenna is in full raised position. Antenna will not rotate

if not fully raised.

Antenna won't rotate and lower when pressing

Up/Down Button. The Up, Motion, Down lights

blink after pressing a Rotate Button.

a. Check for obstructions that prevent antenna head from rotating

and lowering. Examples tree branches, snow or ice, etc.

Picture quality poor. a. Is antenna power supply turned on and working properly?

b. Are you in a location that receives good TV Signals from TV

station?

c. Is there a fellow RV that can verify they can receive a signal?

d. Did you rotate antenna to try and improve signal

e. Disconnect coax at antenna head and check for 12VDC between

coax center conductor and connector. If you have proper voltage,

antenna head may be bad. If no voltage, check that power supply

is working properly. If it is working properly check for shorts or

opens in coax between power supply and antenna.

f. Check connections between power supply and TV/Video center etc.

g. Contact your Dealer or Winegard Company.

Need to move RV and Antenna system won't

lower to roof.

a. If for some reason you cannot automatically

lower antenna and need to drive your RV, you

can manually lower antenna. If antenna is in up

position physically grip turret and rotate very

slowly in the CW direction until you hit the

internal mechanical stop at which time the

wings of the Antenna head should be inline with

length of RV. While holding turret with one

hand, use other hand to slowly push antenna

head down and toward rear of RV. This will

place antenna system in driving position until

you can receive service.

4

Printed in U.S.A. Winegard Company • 3000 Kirkwood Street • Burlington, Iowa 52601-2000 © Winegard Company, 2005 2452082

Returned units damaged in shipping due to improper packing will be charged to the dealer/customer.

Warranty

WINEGARD MOBILE PRODUCTS LIMITED WARRANTY

(2 YEARS PARTS; 1 YEAR LABOR)

Winegard Company warrants this product against defects in materials or workmanship for a period of two (2) years from the date of original purchase.

During year one (1) of such warranty, Winegard Company will also pay authorized labor costs to an authorized Winegard dealer to repair or replace

defective products. No warranty claim will be honored unless at the time the claim is made, Customer presents proof of purchase to an authorized Winegard

dealer (to locate the nearest authorized Winegard dealer, contact Winegard Company, 3000 Kirkwood Street, Burlington, Iowa 52601, Telephone 319-754-

0600 or visit www.winegard.com). Customer must provide proof of purchase with a dated sales receipt for the Winegard product to verify the product is

under warranty. If the date of purchase cannot be verified, the warranty period shall be considered to begin thirty (30) days after the date of manufacture.

If a defect in material or workmanship is discovered, Customer may take the product to an authorized Winegard dealer for service. Customer must provide

proof of purchase to verify the product is under warranty. If the product is brought to an authorized Winegard dealer for service prior to expiration of year one

(1) of the warranty period and a defect in material or workmanship is verified by Winegard Technical Services, Winegard Company will cover the Winegard

dealer’s labor charges for warranty service. The Winegard dealer must contact Winegard Technical Services in advance for pre-approval of the service.

Approval of the service is at the sole discretion of Winegard Company.

Alternatively, Customer may ship the product prepaid to Winegard Technical Services (located at 3000 Kirkwood Street, Burlington, Iowa 52601, Telephone

319-754-0600). Customer must return the product along with a brief description of the problem and provide Winegard Technical Services with Customer’s

name, address, and phone number. Customer must also provide proof of purchase to verify the product is under warranty. If the product is returned before

the expiration of the warranty period, Winegard Company will (at its option) either repair or replace the product.

This Limited Warranty does not apply if the product has been damaged, deteriorates, malfunctions or fails from: improper installation, misuse, abuse,

neglect, accident, tampering, modification of the product as originally manufactured by Winegard in any manner whatsoever, removing or defacing any

serial number, usage not in accordance with product instructions or acts of nature such as damage caused by wind, lightning, ice or corrosive environments

such as salt spray and acid rain.

RETURN AUTHORIZATION POLICY

A Return Material Authorization (RMA) is required prior to returning any product to Winegard Company or Winegard Warranty Services under this warranty

policy. Please call our Technical Services Department at (800) 788-4417 or send an e-mail to warranty@winegard.com to obtain the RMA number. Please

furnish the date of purchase when requesting an RMA number. Enclose the product in a prepaid package and write the RMA number in large, clear letters

on the outside of the package. To avoid confusion or misunderstanding, a shipment(s) without an RMA number(s) or an unauthorized return(s) will be

refused and returned to Customer freight collect.

WINEGARD COMPANY DOES NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY OTHER

PERSON.

ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE

AND MERCHANTABILITY ARE LIMITED TO THE TWO YEAR PERIOD OF THIS WARRANTY.

In states that do not allow limitations on implied warranties, or the exclusion of limitation of incidental or consequential damages, the above limitations or

exclusions do not apply.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of limitation of incidental or consequential damages, so the

above limitations or exclusions may not apply to you.

This warranty gives Customer specific legal rights. Customer may also have other rights that may vary from state to state.

Rev.12/29/05

5

Printed in U.S.A. Winegard Company • 3000 Kirkwood Street • Burlington, Iowa 52601-2000 © Winegard Company, 2005 2452077 Rev. 12/29/05

Addendum

Addendum to Owner's Manual

Your Winegard Motorized Sensar Antenna includes a wire to

run an optional Antenna Warning System (not included).

This wire is found in the power wire harness. Winegard is

currently using a white wire with a strip of orange tape at both

ends of the Antenna Warning wire. This is labeled as an

Orange wire in the Installation Manual.

Please keep in mind that if an end of the Antenna Warning

System wire is cut, you will no longer see a strip of orange

tape, only a white wire.