Winegard Tv Antenna Sk 7003 Users Manual

SK-7003 to the manual a724f83b-0b49-4225-ae5e-26d7a41e11ec

2015-02-03

: Winegard Winegard-Tv-Antenna-Sk-7003-Users-Manual-479962 winegard-tv-antenna-sk-7003-users-manual-479962 winegard pdf

Open the PDF directly: View PDF .
Page Count: 5

TRAV’LER®

Automatic Multi-Satellite TV Antenna

Model SK-7003 Mount

Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000

319/754-0600 • FAX 319/754-0787 • www.winegard.com

Printed in U.S.A. © Winegard Company 2012 1/12 2452260

WINEGARD®

SK-3005

PRODUCT REGISTRATION

Please register your Winegard product by lling

out and returning the Product Registration card

provided or by completing the online registration

form at http://www.winegard.com/registration

Serial No.

1 888 554-STAR

Company

STA

R C

HOICE

SHAW

OPERATION MANUAL

Made in the U.S.A.

Operation

The TRAV’LER Interface offers a simple one button operation that is also protected from accidental searches by a

careful delay. Simply pressing the [Power] button will not start a search.

To start a search:

Press and Hold [Power] for two seconds or until the TRAV’LER interface displays

“POWER ON”.

Now the power is ON, the button may be released.

Once the power is on, the TRAV’LER Interface will try to determine the type of dish that it is working with. The

TRAV’LER Interface will display the type of satellite dish on the top line and the action it is taking on the bottom.

See below.

The TRAV’LER antenna will enter the search mode as part of its normal operation. The rst part of the search is

for the TRAV’LER to nd its “Home” position. Once it nds it home position, it will begin to look for a satellite.

When the TRAV’LER antenna nds a satellite, it will ne tune or “Peak” on the signal and determine which of the

satellites it has found. Once the TRAV’LER knows which satellite it has found, it can move directly to the correct

satellite(s).

The TRAV’LER antenna in its automatic search mode will lock onto two dfferent satellites. As it nishes its search,

the TRAV’LER will display an “ * ” for each of the satellites it found. See below.

WINEGARD COMPANY

POWER ON

CONNECTING

TO ANTENNA

LG SHAW DIRECT

READY MULTI-SAT

LG SHAW DIRECT

*111 *107

Now you are ready to watch TV.

OPERATION

Congratulations!

You have selected the Winegard® TRAV’LER Automatic Multi-Satellite TV Antenna. The TRAV’LER

antenna will deliver the ability to view both SHAW DIRECT satellites at the same time with unmatched

signal strength, the lowest travel height on the market, maximum HD capabilities and easy to use func-

tionality – just like you get at home. This manual provides important information on the installation and

operation of your TRAV’LER Interface Box. Please take time to read the manual in it’s entirety before

installing or operating your antenna.

Icons appearing in the manual are used for important information and helpful tips.

Alert indicates important information regarding

product use, product specications or procedures.

Important tip offers helpful suggestions or

refers you to a related topic in the manual.

For Winegard Warranty Information:

Attn: Technical Services

Winegard Company

3000 Kirkwood St.

Burlington, IA 52601

800-788-4417

Fax: 319-754-0715

Disclaimer

Although every effort has been made to insure

the information in this manual is correct and

complete, no company shall be held liable

for any errors or omissions in this manual. All

information contained in this manual is subject to

change without notice. No warranty of any kind is

made with regard to the information included in

this manual. The Satellite Interface is designed

specically for use with motorized recreational

vehicles and information contained herein is

provided for that purpose only.

Trademarks

*WINEGARD and TRAV’LER are trademarks

of Winegard Company. Shaw Direct and

related designs and indicia are trademarks of

Shaw Direct. All trademarks contained in this

manual are property of their respective owners.

Reference made to products or services provided

by companies, other than Winegard Company,

does not represent any endorsement of those

products or services.

OPERATION

LG SHAW DIRECT

WAITING FOR GPS

Many times, the

TRAV’LER will acquire

GPS fast enough that

this screen is not seen.

For Shaw Direct Programming Inquiries:

Attn: Administration

Shaw Direct

Suite 100, 2400 32 Ave NE

Calgary, AB T2E 9A7

888-554-7827

Fax: 800-872-8219

Press [Select] to cycle through each of these satellites until the asterisk is next to the satellite you wish to nd.

Then press [Enter].

The TRAV’LER Interface will ask you to conrm the change:

Press [Select] to move the asterisk to YES.

The Trav’ler Interface will acknowledge your selection and ask:

Pressing [Enter] or choosing YES, will stow the TRAV’LER and turn it off.

Pressing [Select] then [Enter] or choosing NO will start a new search for your chosen satellite.

EMERGENCY OFF:

The Winegard TRAV’LER antenna comes with an emergency Power Off feature.To activate it, press

and hold [POWER] and then press [SELECT] while still holding [POWER]. The TRAV’LER antenna will

stop where it is and turn off.

If the Emergency Power Off is used, the TRAV’LER antenna may not be in a safe position for

travel. DO NOT MOVE THE VEHICLE UNTIL YOU ARE ABLE TO STOW THE UNIT. See Ready to

Travel, top of page 4, Operation section.

Manual ###

*YES NO

POWER OFF

*YES NO

The TRAV’LER will remain in

manual mode until you select

multi-sat mode again.

To use the Manual Search Mode to select a specic satellite, choose Search Mode by pressing the [Enter] button.

Once in the Search Menu you may choose from:

MULTISAT MODE (The normal search mode)

MANUAL 61

MANUAL 72

MANUAL 82

MANUAL 91

MANUAL 101

MANUAL 107

MANUAL 110

MANUAL 111

MANUAL 119

MANUAL 129

MANUAL 148

MAIN MENU (returns to the User Menu)

EXIT (Enters the Search Routine)

OPERATION

Ready to Travel?

To stow the unit when you are ready to travel:

Press [Power] one time.

The unit will stop what it is doing and begin to return to the stowed position. The TRAV’LER Interface WILL NOT

TURN OFF unless the TRAV’LER mount is successfully stowed.

Manual Mode:

The TRAV’LER antenna is an extremely versatile satellite antenna and can be manually set to nd many different

satellites individually. NOTE: This function is rarely used.

To enter the Manual Search Mode while the TRAV’LER is stowed:

Press the [Power] button and hold it for two seconds to turn the unit on.

While the Trav’ler Interface reads:

Press and hold the [Enter] button for two seconds.

The TRAV’LER Interface will ask if you wish to enter the User Menu:

Press [Select] to choose YES and then press [Enter].

The User Menu consists of four choices:

Search Mode

Diagnostics

Installation

Exit

NOTE: Diagnostic and Installation Menus are not required for normal operation and should only be entered by a

trained professional.

POWER OFF

STOWING

WINEGARD BURLINGTON

POWER ON

ENTER USER MENU

*YES NO

OPERATION

The SK-7003 will only see

the 107° and 111° satellites in

manual mode.

LG SHAW DIRECT

STOWING

OPERATION 7

TROUBLESHOOTING:

ANTENNA CONNECTION FAILED

EL HOME FAILURE

AZ MOTOR STALLED

EL MOTOR STALLED

SK MOTOR STALLED

STOW FAILURE

ANT NOT STOWED

STOW FAILURE

STOW UNKNOWN

AZ MOTOR RUN REVERSE

EL MOTOR RUN REVERSE

SK MOTOR RUN REVERSE

AZ MOTOR RUNAWAY

EL MOTOR RUNAWAY

SK MOTOR RUNAWAY

NO LNB VOLTAGE

UNKNOWN ERROR ######

C MOTOR NOT FOUND

ANTENNA WILL NOT AUTOMATICALLY STOW

UNSUPPORTED ODU HARDWARE

UNSUPPORTED ODU SOFTWARE

GPS FAILURE

Check the data cable connection on the back of the Trav’ler Interface.

It may not be connected properly.

Something is preventing the TRAV’LER Mount from raising as it at-

tempted to nd the HOME position. Look for obstructions if unit has

recently been manually raised, or the electronics have been replaced.

The calibration may need to be reset. Contact Winegard Technical

Support 1-(800) 788-4417.

Something is preventing the TRAV’LER mount from rotating; look for

obstructions. If no obvious obstruction, contact Winegard Technical

Support 1-(800) 788-4417.

Something is preventing the TRAV’LER mount from raising or lower-

ing; look for obstructions. If no obvious obstruction, contact Winegard

Technical Support 1-(800) 788-4417.

Something is preventing the TRAV’LER reector and LNBF from rotat-

ing; look for obstructions. If no obvious obstruction, contact Winegard

Technical Support 1-(800) 788-4417.

The TRAV’LER is not stowed. Do not try to move the vehicle. Try to

stow the TRAV’LER again. If it fails again, check for obstructions.

Check the data cable connection on the back of the TRAV’LER Inter-

face. It may not be connected properly.

Contact Winegard Technical Support 1-(800) 788-4417.

The TRAV’LER is not seeing the required 13-18VDC needed to power

the LNBF. Check the coax connections. If these are all connected

properly, contact Winegard Technical Support 1-(800) 788-4417.

Contact Winegard Technical Support 1-(800) 788-4417.

See Emergency Manual Stow instructions. See Page 9 of Installation.

Contact Winegard Technical Support 1-(800) 788-4417.

The GPS has taken longer than 10 min. to acquire. Contact Winegard

Technical Support 1-(800) 788-4417 if this happens frequently.

!Note: Weather and vehicle location can impact the ability of the TRAV’LER antenna to locate all of the required satellites.

Obstructions such as buildings or tree limbs can block the satellite signals and prevent the TRAV’LER antenna from successfully

locating all of the satellites for Multi-Sat Mode. Make sure you have a clear view of the Southern sky.

POSSIBLE SOLUTION:

ERROR CODE:

OPERATION

Hooking up the Shaw Direct receiver

Connect your Shaw Direct receiver to the TV using the appropriate audio and video cables. (Refer to

your television user manual for the best audio /video connections).

If you have not chosen a programming package for your Shaw Direct system or added this receiver to

your existing Shaw Direct account, please call 1-888-554-7827 prior to using your Shaw Direct receiver

for the rst time.

Ensure that your Shaw Direct receiver is connected to power.

Locate the coaxial feed coming from TRAV’LER system.

Connect the satellite feed to the coaxial input labeled with the symbol of a satellite dish.

Power on the Shaw Direct receiver and television.

If your TRAV’LER system is properly tuned and receiving signal, the satellite dish icon on the front of

the Shaw Direct receiver will be highlighted in green.

If the TRAV’LER system is stowed or not tuned to the Shaw Direct satellites, the satellite icon on the

front of the Shaw Direct receiver will appear in red. Turn on the TRAV’LER unit or troubleshoot as

needed to reachieve positive signal.

If your Shaw Direct system is disconnected from power for an extended period of time or you has been

recently moved from another location, you may need to have your Shaw Direct system reauthorized.

This can be determined when you receive a green (positive) signal, but can not receive video on a sub-

scribed channel.

To initiate a signal refresh call 1-888-554-7827, then select “Self-Serve”, “Technical Support”, followed

by “Signal Refresh” from the telephone menu options.

For changes to Shaw Direct programming or to purchase new Shaw Direct equipment visit

shawdirect.ca or call 1-888-554-7827.

NOTE: The TRAV’LER antenna will nd the satellites without the receiver installed.

NOTE: If the TRAV’LER antenna is connected to multiple receivers and any one is locked on the satellite, all receivers should

be locked on signal. If one or more are not, check the coax connections for 13-18VDC at the LNBF. Without this voltage, the

receiver will not get a signal.

Rev. 4/09

Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000

319/754-0600 • FAX 319/754-0787 • www.winegard.com

Winegard Tv Antenna Sk 7003 Users Manual

SK-7003 to the manual a724f83b-0b49-4225-ae5e-26d7a41e11ec

Navigation menu

Versions of this User Manual:

Views

Navigation