Winplus LM55973 LED Indoor Shop Light User Manual

Winplus Co., Ltd. LED Indoor Shop Light

User Manual

CARE & USE INSTRUCTIONS
IMPORTANT, RETAIN FOR
FUTURE REFERENCE: READ CAREFULLY
For assistance with assembly or installation, parts and customer service, call us at 1-866-294-9244 (English),
Monday - Friday, 8am - 5pm Pacic Time, email us at info@winplususa.com
820 South Wanamaker Ave., Ontario, CA 91761, USA
www.winplus.com
ITM. / ART.
Model: LM55973
LED INDOOR
SHOP LIGHT TM
WITH MOTION SENSOR
2
Important Safety Instructions:
This light is operated by a Smart Sensor Control. It will automatically switch on when
motion is detected and will turn o automatically when there is no movement in area
for preset time.
Please read the following safety information before use.
To reduce risk of re, electric shock, or injury to persons:
 Grounded lights must be plugged into an outlet properly installed and grounded in
accordance with all codes and ordinances.
 
not modify the power cord plug provided with the product. Never remove the grounding
prong from the plug .
 
by a service facility before use. If the plug does not t the outlet, have a proper outlet
installed by a qualied electrician.
 
 
 
from an outlet. Keep the power cord away from heat, oil, sharp edges, or moving parts.
 
 
other than supplied with this product.
 
 
 
 
when handling these parts.
 Consult a qualied electrician to ensure correct branch circuit conductor.
Warning:
 
can link up a total of 6 shop lights together. Please do not link to shop lights of other
models, and do not link up more than 6 shop lights together.
 
or the service agent or qualied person in order to avoid a hazard.
 
possible conditions and situations that may occur. The operator must understand that
common sense and caution are factors which cannot be built into this product, but
must be supplied by the operator.
3
Package Contains:

 

  

Tools Needed (not included)
Phillips head screwdriver Safety glasses

Please lay out all parts and read the instructions prior to installation.
699 mm / 27.5 in / 27.5 po
Measuring Template
NOTE:
The product is intended to be connected
to a plug and does not need t o be s witched
The default setting for the Smart sensor is set at
Very near and the light will dim when no motion
is detected within 30 seconds, and will turn OFF
when no motion is detected within an additional
to page 8 of the user manual.
QIG-55973_V1
9 107 85 63 41 2
4
Product Specications:




5. Color Temperature: 4000K



Installation Procedures:
The product is intended to be connected to a plug and does not need to be switched




recommended to disable the motion sensor (see P.12) when installing the light in small
rooms (e.g. storage closet, pantry, etc.) so movement outside these rooms cannot be
picked up by the sensor. The light will operate through the Main switch in this scenario.
NOTE: The sensor can detect movement through walls and doors.
Ceiling hanging with hanging wires:

1. Select a suitable mounting location,
and make sure the wooden surface is
suitable for supporting the light. Use the
measuring template to mark the hook
locations on the mounting surface.
Final installed illustration
1
Light fixture dimensions:
 

5
5. Clip mounting brackets onto the
light.
The light is intended to be installed
directly beneath a ceiling-mounted

be kept out of the work space, such as
by securing it to one of the supporting
chains with a cable tie.
2. Wear safety glasses before drilling
pilot holes.
3. Screw in the screw hooks.
2 3
4a. Slip the hanging hook through
the wire.
4b. Insert the hanging hook into the
openings of the mounting bracket.
Repeat for another mounting bracket.
4c. Mount the wire onto the screw hook,
and repeat for another wire and hook.
4a
4c
4 5
4b

6
Ceiling ush mount:
Final installed illustration 1. Select a suitable mounting location,
and make sure the wooden surface is
suitable for supporting the light. Use the
measuring template to mark the hook
locations on the mounting surface.
2. Wear safety glasses before drilling
pilot holes.
2
3. Screw the mounting bracket with the
wood screws provided. Repeat for the
second mounting bracket.
Note: For concrete or drywall, you may use
screws along with plastic anchors.
3
4. Clip mounting brackets onto the light.
4
1
7
4a. Mount the hanging hook into the screw
hook. Repeat for the second hanging hook.
4b. Insert the hanging hook into the middle
opening of the mounting bracket. Repeat for
the other mounting bracket.
5. Clip mounting brackets onto the light.
2. Wear safety glasses before drilling pilot
holes.
3. Screw in the screw hooks.
1. Select a suitable mounting location,
and make sure the wooden surface is
suitable for supporting the light. Use the
measuring template to mark the hook
locations on the mounting surface.
Ceiling hanging with hooks:
Final installed illustration
3
2
a
b
4
1
5
8
Smart Sensor Control Setting and Operation:
Link up multiple Shop Lights

light in dierent locations by selecting the Smart Sensor control setting that is most
suitable for the desired location and use. Please refer to the following instructions for
choosing the Smart Sensor control setting.
CAUTION: Unplug the power cord from the electrical outlet before adjusting the Smart
Sensor control setting.
Connect to Power Outlet Connect to another
shop light

6 shop lights
After unplugging the power cord, you
can open the switch cover and select
the most suitable Smart Sensor control
setting accordingly.
NOTE: 

Smart Sensor Switch Settings
9 107 85 63 41 2
Distance
Distance
Very
near
Very Near 30 Sec O 100% 30 Sec
O O 25% O
Near 30 Sec Overcast 50% 30 Sec
Mid-
range 10 Min  75% 10 Min
Far 30 Min Night 100% 30 Min
Time Until Dim
(No motion)
Time Until Dim
(No motion)
Ambient Light
Sensor
Ambient Light
Sensor
Time Until O
(No motion)
Time Until O
(No motion)
Brightness
Brightness
9
Switches 1 & 2: Sensor Detection Distance

from various settings: Very near, Near, Mid-range and Far. The sensing distance would


Any movement inside the detection zone
will be detected by the motion sensor.
Actual sensing distance may be inuenced
by environment conditions.

distance increases in an area with lots of metallic objects.
NOTE: 


larger area.
Switches 3 & 4: Time Until Dim (no motion)


dimmed if there is no movement detected by the sensor. Any movement detected
within this period will restart the timer.

select brightness level to 75%, then the light will be dimmed to 37.5% of full brightness.
Refer to switches 7 & 8 setting for brightness level setting.
Denition of each Smart Sensor Control Setting:
Setting 

Very near 
Near 
Mid-range 
Far 

10
Switches 5 & 6: Ambient Light Sensor



such as sunny day, the light will stay OFF even if motion has been detected. When
the surrounding area is less bright than overcast and there is motion detected by the

surrounding is dark and there is motion detected by the sensor.
The “OFF” mode is for usage where you want to disable the light sensor function, i.e.
the light is controlled by motion sensor only. This mode would be suitable for using in
a parking lot, which you may want to keep the light always ON regardless of ambient
light.
Note: Light sensor function will be disabled when Time Until O (No motion)
(Switches 9 & 10) is set to OFF
Switches 7 & 8: Brightness Level %

from 25%, 50%, 75% and 100% from the full brightness.
Switches 9 & 10: Time Until O (No motion)
Time Until O (No motion) is the time for the light to turn OFF completely when there

minutes. The light will be turned OFF when there is no motion detected within the
preset time. Any movement detected within this period will restart the timer and the
light will be turned on again.
11
The motion sensor covers a small area and the light will dim down when there is no
movement detected within 30 seconds, and the light will completely turn o when no
movement is detected within 30 seconds after.
Some Recommended Settings:
Home Use / Garage:
1 



9 & 10 Time Until O: 30 sec


After choosing the desired Smart Sensor control setting, please close the switch



sec and S9 & S10 as 5 min: the light will be dimmed down when no motion has been
detected for 30 seconds and the light will be turned OFF when no motion is detected
within 5 minutes after. Any movement detected within this period will restart the
timer, and the light will turn on again.
12
By selecting this mode, the light will be ON all the time. When there is no movement
within 10 min, the light will dim down. The light will return to full brightness when
there is movement detected.
The light will be completely o when there is no movement detected within 30 minutes
Always On:
1 



9 & 10 Time Until O: O
Oce:
1 



9 & 10 Time Until O: 30 min


Disable Motion / Light Sensor:




9 & 10 Time Until O: O
13
Maintenance:



should plug in the light after it has been completely dried.
Troubleshooting:
Issue Cause Remedy
The light is
not working
The light is not plugged in or the Main
switch is OFF Plug in and turn on the Main switch
The ambient light sensor is ON and it
switches OFF the light while the ambient
is bright.
Change the Switches 5 & 6 to OFF, or
other appropriate settings
The light is
always ON
Continuous movement
in the detection zone
Change Switches 1 & 2 settings to
shorter distance, such as Very Near
Motion sensor has been switched OFF Change Switches 9 and 10 to other
appropriate settings
The light is ON
without any
identiable
movement
Movement occurred (movement behind
wall, movement of a small object in
immediate lamp vicinity, etc.)
Change Switches 1 & 2 settings to
shorter distance, such as Very Near
The light is not ON
despite movement
Rapid movements are being suppressed
to minimize malfunctioning of light or the
detection zone you have set is too small
Check Switches 1 & 2 settings
The ambient light sensor is ON and it
switches OFF the light while the ambient
is bright
Change the Switches 5 & 6 to OFF, or
other appropriate settings
14
Warranty:
Winplus North America
This Winplus product carries a 1 year warranty against defects in workmanship and

or abuse.
NOTE: Warranty only applies for North American customers of purchases made in North
America.
Conditions of Warranty
If during the 1 year warranty period your new product is found to be defective, Winplus
North America will repair such defect, or replace the product, without charge for parts
or labor subject to the following conditions:
 
 
 
accident, improper operation, or failure to follow the product instructions for
installation, use, or care.
 
necessary due to normal wear and tear.
 
 
 
the installation, removal or reinstallation of the product.





15

RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.


The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modications or change to this equipment. Such modications or change

This radio transmitter (IC: 7297A-55973) has been approved by Industry Canada to

indicated. Antenna types not included in this list, having a gain greater than the

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio

particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on,
NOTE:

For customer service and technical support, please call us at 1.866.294.9244 or email
us at info@winplususa.com. If at that time it is determined that a replacement unit is
needed, the support representative will issue a Return Authorization and instruct on
how to get a new unit.
Winplus North America makes no other warranty of any kind aside from the limited








FCC / IC Compliance Statement:
16
the user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.



installed and operated with a minimum distance of 20cm between the radiator and
your body.





www.costco.com


or visit us online at www.winplus.com
820 South Wanamaker Ave., Ontario, CA 91761, USA | Tel: 1-866-294-9244
© 2017 Winplus North America Inc. All rights reserved.
Revision date: February 2017

Navigation menu