Winplus WB120 WB120 UART DONGLE User Manual PowerPoint
WINPLUSCORP CO.,LTD. WB120 UART DONGLE PowerPoint
Winplus >
Manual
一. 產品資訊
3.溫度範圍
工作溫度: -20 ~ 60 °C
2. RF 規格
藍芽:相容於Bluetooth 4.0
項目:
規格
長 x 寬 x 高
18.5 * 14.5 * 5.95mm
電源
USB
認証
FCC / NCC / CE / KCC
二.使用說明
NCC警語:
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不
得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾
現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，
指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工
業、科學及醫療用電波輻射性電機設備之干擾。
4.產品規格
1.開啟裝置
(a) USB插槽供電
2.安裝APP
(a) 手機 / 平板相容Bluetooth 4.0
(b) 至APP Store 或 Play商店
搜尋 WINPLUS
產品可藉由更新軟體 , 提升產品性能.
3.使用APP
(a) 開啟APP
(b) 按 後會找到裝置
(c) 點選裝置後會進入連線模式
(d) 可和裝置互傳輸資訊
1.產品外觀
http://www.winpluscorp.com.tw/
宇程資通股份有限公司
W I N P L U S WB120中文說明書
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
一. Product Information
3.Temperature Range
Operating : -20 ~ 60 °C
2. RF section
Support Bluetooth 4.0
Item
Spec.
L x W x H
18.5 * 14.5 * 5.95 mm
Power Supply
USB
Certification
FCC / NCC / CE / KCC
二. Setup Guide
NCC警語:
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不
得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾
現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，
指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工
業、科學及醫療用電波輻射性電機設備之干擾。
4. Specification
1.Installation
(a) Insert the WB120
into the USB port.
2. APP Installation
(a) iOS and Android device
compatible with Bluetooth 4.0
(b) Go to APP Store or Play store,
search WINPLUS by your device.
For APP new version,
Please go to web side on below :
3. Start using APP
(a) Turn on the APP
(b) Press in the APP
(c) Select the device and it
will be into connection mode.
(d) Enter the data you want
to transmit.
1. Appearance
http://www.winpluscorp.com.tw/
WINPLUSCORP CO., LTD.
W I N P L U S WB1 2 0 I n s t r u c t i o n
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.