Winsonic Technology BC-008 FM Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	887133
Application ID	zhYw3KVlGiEPolmrTf91SA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.91kB (123836 bits)
Date Submitted	2008-01-09 00:00:00
Date Available	2008-01-09 00:00:00
Creation Date	2007-12-18 17:23:55
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual

Receiver 439 A
J- ~~~~~ Antenna
/ Power switch and
z/voiume adjustment
ight indicator
----- Scan
"’-Aud'n line socket
lnelellation
Open battery compartment on receiver
(A)and transmitter (B)and insert ZxAAA
betteriesin both units (not included ).
conned thetrane-nitter (B)to sound source
us'ng either the phono interconnect Ieads(red
and white plugs/lead provided) intoAudio Out
on your'l'V, DVD, HI-Fl or other somd source
and the otherend intoAudio in RfLesshown
on the diagram (Bi
Altemetively you may have to useihesfimm
Jack lead (provided) by plugging it into Audio
Out on youroomputer,T\/, DVD, Hi-Fi or other
sound souroea'id the other end into Audio in
— 35mm asshown on the diagram (B).
Operation Instruction
1.Tum the power switch to the ON position,
the red LED wil come on.
2 Pull up antenna and adjustvolume to
desired position.
3. Press RESETbution followed by SCAN
button to receive sound.The first sound
received is from TV,end then FM radio,
computer/DVD or similar sound source.
Receiving FM Radio
1.Reos§veroan bemedesmradioreoeivsr
when used alone.
2. Ensurethe antenna isfully extended for
best reception,
‘tfl§. emu" M.
roam-“u.
mum-mum
(Mmmm-M-ri ,’ mum»
©
wireless headphones
Ins traction Manual
Pansmttter - fig B
light (front)
’ /'Audio in - 3.5mm
, // . .
.‘ ,.«Audio in - Phone R/L
//
Battery compartment (bottom)
3. PressRESEl'butlon followed by SCAN :
button to tune intothe desired radio station. i
The first sound received is form TV and then ’
FM radic.The selection frequency is between
82.5MHZ and 106MHz; the radio wlll scan
through the frequency selecting a different
radio station each time the SCAN button is ,
pressed. 3
Using Wired Headphones and Mlc Function ©
The wireleseneacbhonescan be usedas ‘
wired headphones by connecting uneend oi
theaudio lead (black lead with 3.5mm jack
plugsat each end)to your sound source and
theotherend to the audio line socket on your
headphones Also you can chat freely on
the intemet with Mic supplied.
lMPORTANT
it sound lstoo loud ordistorted, please turn
down souree volume to improve receiving
effect.
Fenacebanerieswhen: 1
Power light isdim
Receiver can barely receive sound
Volume islow
Alwayslurn off lrsnsmiiter‘s power supply
after use.
For best signal strength It issuggested to
pleoethe trensmitterat high position.
Q5 mbuI-Wmn—mnr
mmenm %
an my nuts and—ind owe-um,
This device complies with palHSo’flhe FCC Rules. Oprah's-i is subject to the folio-ling two Pondlllomxlyfllil MI“
may not urn! harmful interferente, mail) this device must accept any immereme received inctuding interference
nmwmmmmm v
12/5/07 swan t
FCC WARNING:
This equipment may generate or use radio fi'equency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an unauthorized change or modification is made.
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation This equipment generates, uses and can radiate radio fi'equency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
detennined by turning the equipment of and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
0 Reorient or relocate the receiving antenna.
0 Increase the separation between the equipment and receiver.
0 Connect the equipment into an outlet on a circuit difierent from that to which the receiver is connected.
0 Consult the dealer or an experienced radio/1" V technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2007:12:18 17:23:55
Page Count                      : 2

EXIF Metadata provided by EXIF.tools