Winstars Technology WSWN683NA Wireless N 150 Mbps USB Receiver with Antenna User Manual WS WN683N2P

Download:
Mirror Download [FCC.gov]
Document ID	2421295
Application ID	sYdYVtvOP15VmjETNECxTg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	27.86kB (348300 bits)
Date Submitted	2014-10-17 00:00:00
Date Available	2014-10-17 00:00:00
Creation Date	2014-09-16 11:20:11
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2014-09-16 11:20:11
Document Title	Microsoft Word - WS-WN683N2P说明书.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

Wireless N 150Mbps USB Receiver with Antenna
WS-WN683NA,U12-42422
Quick install guide
Introduction
Thank you for purchasing the Wireless-N USB Adapter,.
Wireless-N USB 2.0 Adapter allows you to connect your laptop or desktop to
any Wireless-N networks in your home or office. The Wireless-N (802.11n)
USB 2.0 Adapter is great for those who want to upgrade older computers to
be able to access the internet over a Wireless-N network.
Package Contents
• Wireless-N USB Adapter
• Setup CD with user manual
• Quick install guide
System Requirements•
Notebook or desktop PC with Pentium 1 GHz-compatible or higher
processor
• Windows 2000/XP/Vista/7, MAC OS, Linux
• Available Hi-Speed USB 2.0 port
Installation
IMPORTANT: For proper operation, do not connect the Wireless-N USB
Adapter to your computer before you install the software. If you do, wait for
the Found New Hardware screen to display and click “Cancel”; otherwise,
the installation process will likely be adversely affected.
Insert the included setup
CD in the CD-ROM Drive
and start the Setup.exe
program.
To start the installation,
please click on the “USB
Wireless 802.11N
Drivers”
Wait for the installer to
run
Select Language and
click “Next” to continue
with the installation.
The installer will
automatically install the
program. When done
Select Yes, I want to
restart my computer now
and click Finish to reboot
your computer.
With the computer now turned on, insert the
Wireless-N USB Adapter into an open USB 2.0
port.
With the Welcome to the
Found New Hardware
Wizard screen displayed
(which is automatic when
the adapter is connected
to the .computer), select
the option “No, not this
time” and click “Next.”
When prompted with
“What do you want the
wizard to do?” select
“Install the software
automatically
(Recommended)” and
click “Next.”
A status screen will
display, indicating that
the installation is in
progress. No action is
needed at this point.
When the Completing the Found New Hardware Wizard screen displays, it
indicates that the installation has been successfully completed and your
Wireless-N USB Adapter is ready for configuration.
Configuration
Once the installation is complete, you can configure the Wireless-N USB
Adapter to connect to a wireless access point (AP). The wireless
configuration utility will start automatically, and you’ll also find a tray icon at
the lower right in your Windows systems tray.
1. Right-click the Wireless
tray icon and select “Open
Config Utility.”
2. The configuration utility will scan for wireless networks within range. Click
“Refresh” to refresh the list of available wireless networks. To join a
particular network that displays, select it and click “Add to Profile.”
3. If the wireless network uses encryption, you need to input the correct
encryption key. The configuration utility automatically suggests the correct
authentication type (see the drop-down list), and you should not change the
suggested value.
NOTE: For WPA/WPA2 networks, you need to select the correct
encryption type, as well (AES or TKIP). These settings depend on how the
wireless network is set up. Only the owner of the wireless network can
provide the required information.
*** When you select the TKIP encryption mode, the speed would switch to
802.11g 54M following the TKIP protocol
4. If the wireless access point is successfully connected, you’ll see.
NOTE: For advanced settings and additional features of the Wireless-N USB
Adapter, refer to the user manual on the enclosed CD.
FCC INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This
device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority
to operate this equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment.
The Maximum SAR value:0.470W/Kg

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2014:09:16 11:20:11+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2014:09:16 11:20:11+08:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - WS-WN683N2P说明书.doc
Document ID                     : uuid:55f89550-69b6-4abf-b3e4-b8133d7ed520
Instance ID                     : uuid:65cca358-5e59-454c-82eb-a161a3ca4207
Page Count                      : 9
Author                          : Administrator

EXIF Metadata provided by EXIF.tools