Wintecronics TX67A Remote Control Transmitter User Manual manual

Wintecronics Ltd Remote Control Transmitter manual

User Manual

The functions of remote control’s buttons. To mute the siren chirp when this button is pressed one time, thesecond press of this button to revert to siren chirp To remote release the trunk each time this button is pressed To remote activate the locking system of car door if press thisbutton one time. The second press of the same button to remote unlock the car door To remote engine start if this button is pressed The Wintercronics Co., Ltd. Model: TX67A (referred to as the EUT in this report) is aTransmitter of car alarm security system. It offers wireless remote control, ideal for use invehicle security system to activate the function of center door lock control system and carsearching except the alarm system.A major technical descriptions of EUT is described as following:A). Fundamental Frequency: 433.92 MHzB). Modulation : Pulse ModulationC). Antenna Designation: Non-User Replaceable (Fixed)D). Power Supply: 1.5V, Battery OperatedE). Receiver type : SuperheterodyneFundamental Frequency 433.92MHzPower Source 1.5V BatteryTransmitting Time Periodic ≤ 5 secondsAssociated Receiver FCC DOC
FCC StatementThis device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two condition.(1).this device may not cause harmful interference. (2).thisdevice must accept any interference received, including interference that may causeundesired operationWarning:Note: This equipment has been tested and found to comply with the limits for digitaldevice, pursuant to Part 15 of FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, used and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference in toradiate communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:l Reorient or relocate the receiving antennal Increase the separation between the equipment and receiver.l Connect the equipment into an outlet on a circuit different form that to which thereceiver in connected.l Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference: and (2) This device must accept any interference received: including interference that maycause undesired operation.THE MANUFACTURER IS NOT RESPONSIBKE FOR ANY RADIO OR TVINTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THISEQUIPMENT.SUCH ODIFICATIONS COULD VOID THE USER’S AUTHORITYTO OPERATE THE EQUIPMENT.Note: The manufacturer is not responsible for any radio or TV interference caused byunauthorized modification to this equipment. Such modification could void the user’sauthority to operate the equipment.

Navigation menu