Wintop Electronics WM-709L Wireless Mouse User Manual 2

Wintop Electronics Co., Limited Wireless Mouse 2

User Manual

CAUTION:Tousethisdeviceproperly,pleaseread the user’s guide before installaon Model:Step1 open the back coverCharacteristicStep 3.Replace back coverInstalling the BatteriesThe RF2.4GHz optical mouse use one AA alkaline batteries.Installing Batteries in the MouseStep2. Insert the batteries as shown inside the battery compartment.Connecting the ReceiverUSB Port1.Connect the USB piug ONLY to USB port of the computerCAUTION:To use this device properly,please read the user’s guide before installationNano receiverInstructiom ManualRF2.4GHz Optical MouseAbtain the receiver on the mouse1:when you want use the mouse,you can take out the receiver to computer by the list step;2:when you need stop the work or to travel, you can store the receiver on the mouse for the moving by the list step;12Take out the receiver Store the receiver12Dimension:L94×W58.5×H34.5mm;Wireless optical mouse with 3 keys;High precision optical engine;Unique design for good handing feeling;Self-storing nano receiver,easy to take;2.4GHz RF transmission,up to 10m;USB interface,Plug&Play ; Resolution :1200DPI; Compatible with computers of various systems and brands;FC C STAT E MENT : This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operaon.Warning: Changes or modificaons not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of the F CC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separaon between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/T V technician for help.WM-709L

Navigation menu