Wireless Dynamics SDID121X RFID reader User Manual SDiD 1212 User Instructions v0 4

Download:
Mirror Download [FCC.gov]
Document ID	877507
Application ID	4CnHt7L16ZiJ7mw3gPyFkQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.22kB (102794 bits)
Date Submitted	2007-12-10 00:00:00
Date Available	2007-12-11 00:00:00
Creation Date	2007-11-30 16:48:19
Producing Software	pdfFactory 3.10 (Windows XP Professional)
Document Lastmod	0000-00-00 00:00:00
Document Title	SDiD 1212 User Instructions v0_4.doc
Document Creator	pdfFactory www.pdffactory.com
Document Author:	WDI

Wireless Dynamics
SDiD 121X User Instructions
Preliminary Version
V 0.1
Wireless Dynamics Inc.
220, 3636 – 23rd Street NE, Calgary, Alberta, Canada T2E 8Z5
Phone: (403) 250-1818 Fax: (403) 250-1777
PDF created with pdfFactory trial version www.pdffactory.com
Wireless Dynamics
FCC Notice:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following three conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including
interference that may cause undesired operation.
3) This device may not be used with an extender board and must be fully
inserted into the host’s SD slot during operation.
Any change or modification not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
Overview
The SDiD 121X family of Low Frequency (LF) RFID reader/writers, with optional SD
memory, are in the format of a Secure Digital Input/Output, SDIO card.
The model numbers and configurations of the SDiD121X family include:
1. SDiD1210: SDIO format RFID reader.
2. SDiD1212 (i512MB): SDIO format RFID reader with 512MB of industrial SD
memory for data storage.
3. SDiD1212 (s512MB): SDIO format RFID reader with 512MB of commercial SD
memory for data storage.
The SDiD 121X family of LF RFID reader/writers enable PDAs, cellular phones and
other handheld devices to operate as LF Radio Frequency Identification Readers and
Writers.
The SDiD 121X family of readers incorporate the antenna, RFID transceivers, SD
memory (based on model number), and the SDIO interface and all necessary software
drivers.
Wireless Dynamics Inc.
220, 3636 – 23rd Street NE, Calgary, Alberta, Canada T2E 8Z5
Phone: (403) 250-1818 Fax: (403) 250-1777
PDF created with pdfFactory trial version www.pdffactory.com
Wireless Dynamics
Features
Supported LF RFID Protocols:
• LF-RFID at 134.2 kHz.
• See datasheet for specific tag protocol support.
Secure Data, SD, Card:
• SDIO compliant, version 1.10.
• SD Combo Card compliant.
• SD-1, SP-4, SPI mode.
Host Support:
• Supports any device with an SDIO compliant SD slot.
• See datasheet for latest available drivers.
Read and Write Range:
• Up to 5”, depending on tag type.
Operating Frequency:
• 134.2 kHz, FDX mode.
• 134.45 kHz, HDX mode.
Integrated Antenna:
Wireless Dynamics Inc.
220, 3636 – 23rd Street NE, Calgary, Alberta, Canada T2E 8Z5
Phone: (403) 250-1818 Fax: (403) 250-1777
PDF created with pdfFactory trial version www.pdffactory.com
Wireless Dynamics
•
Compact Antenna.
Power Consumption:
• 100mW typical power consumption in stand-by mode.
• 825mW typical power consumption in active mode, RF field-on.
Card Status LED Indicator:
• 3-color LED indicating: standby, search and data communications modes.
Physical Dimensions
Parameter
Outline Dimensions (LxWxH):
Weight:
Nominal Value
See Diagram Below
Less than 10g
Wireless Dynamics Inc.
220, 3636 – 23rd Street NE, Calgary, Alberta, Canada T2E 8Z5
Phone: (403) 250-1818 Fax: (403) 250-1777
PDF created with pdfFactory trial version www.pdffactory.com
Wireless Dynamics
LED Specification
The SDiD 121X has an integrated 3-color LED that is used to indicate the card status.
The following table shows the different LED states and the corresponding card status:
LED Status Indicator
Card Status
Start-Up
Operating Modes: Active and Stand-by
LED State
ON for 2 seconds then OFF
Under control of the Host Software
Application
Operating Instructions
1) Insert the SDiD 121X card into the SD card slot of the host device. The integrated
3-color LED on the SDiD 121X will initially be ON for two seconds before
turning OFF.
2) Start the Host Software Application in the host device.
3) Configure the SDiD121X for the desired mode of operation using the Host
Software Application.
4) When the SDiD121X is actively searching for a tag, place the reader into
proximity with the appropriate tag. The tag will be activated by the RF field and
data will be transacted between the reader and the tag according to the tag type.
5) When the SDiD 121X card is in the standby mode, the LED will be OFF and the
SDiD 121X card will not be able to activate tags until the appropriate mode is
selected in the Host Software Application.
Wireless Dynamics Inc.
220, 3636 – 23rd Street NE, Calgary, Alberta, Canada T2E 8Z5
Phone: (403) 250-1818 Fax: (403) 250-1777
PDF created with pdfFactory trial version www.pdffactory.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Title                           : SDiD 1212 User Instructions v0_4.doc
Author                          : WDI
Creator                         : pdfFactory www.pdffactory.com
Producer                        : pdfFactory 3.10 (Windows XP Professional)
Create Date                     : 2007:11:30 16:48:19-07:00
Page Count                      : 5

EXIF Metadata provided by EXIF.tools