Wistron NeWeb DBUBP207 Bluetooth Adapter User Manual BT Manual type approval v0 01 20111114

Download:
Mirror Download [FCC.gov]
Document ID	1582044
Application ID	hs27GQQ/ASGmx8ODPP99/w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.05kB (275618 bits)
Date Submitted	2011-11-16 00:00:00
Date Available	2011-11-16 00:00:00
Creation Date	2011-11-14 18:15:45
Producing Software	PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)]
Document Lastmod	2011-11-15 17:55:01
Document Title	BT Manual _type approval_ v0.01_20111114
Document Creator	PDFCreator Version 1.2.0
Document Author:	Teresa

DBUB-P207
DBUB-P207
DBUB-P207
Bluetooth Adapter
User’s Manual
This document provides safety instructions and describes the specifications. Read
this document carefully before installing to ensure your safety and product
performance.
Federal Communication Commission (FCC)
Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Federal Communication Commission (FCC)
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant
to Part
15 of thewith
FCCPart
Rules.
These
areFCC
designed
provide
reasonable
This device
complies
15B
and limits
15C of
Rulestoand
RSS-210
of IC Rules.
protection against harmful interference in a residential installation. This equipment generates,
Operation
subject
tofrequency
the following
uses
and canisradiate
radio
energytwo
and,conditions:
if not installed and used in accordance with
the
instructions,
may
cause
harmful
interference
to
radio communications.
theremust
is no
(1) This device may not cause harmful interference,
and (2) However,
this device
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful
to radio received,
or televisionincluding
reception,interference
which can be determined
by turning
the
accept interference
any interference
that may cause
undesired
equipment off and on, the user is encouraged to try to correct the interference by one of the
operation
of this device.
following
measures:
This transmitter must not be co-located or operated in conjunction with any other
- Reorient or relocate the receiving antenna.
antenna
- Increaseor
thetransmitter.
separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the
dealer orStatement:
anatement:
experienced radio/TV technician for help.
Radiation
Exposure
St
The
product Any
comply
with
the FCC portable
RF exposure
limit
set responsible
forth for an
FCC Caution:
changes
or modifications
not expressly
approved by
the party
for
compliance
could
void
the
user's
authority
to
operate
this
equipment.
uncontrolled environment and are safe for intended operation as described in this
manual.
The further
RFbeexposure
reduction
caninbeconjunction
achieved with
if the
product
can be or
kept
This transmitter
must not
co-located
or operating
any
other antenna
transmitter.
as far as possible from the user body or set the device to lower output power if such
Radiation
function isExposure
available.Statement:
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled
environment and are safe for intended operation as described in this manual. The further RF
exposure reduction can be achieved if the product can be kept as far as possible from the user
body or set the device to lower output power if such function is available.
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux
appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions
suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce
dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de
provoquer un fonctionnement indésirable.
Radiation Exposure
Radiation
ExposureStatement:
Statement:
The
product
comply
with
portable
RF exposure
set forth
foruncontrolled
an
This equipment complies the
withCanada
IC radiation
exposure
limits limit
set forth
for an
uncontrolled environment and are safe for intended operation as described in this manual.
environment.
equipment
should
operated
The
further RFThis
exposure
reduction
canbebeinstalled
achievedand
if the
productwith
can minimum
be kept as distance
far as
possible
from the
body &
oryour
set the
device to lower output power if such function is
20cm between
theuser
radiator
body.
available.
Déclaration
auxradiations:
radiations:
Déclaration d'
'exposition aux
dd'exposition
Le
produit
est
conforme
aux
limites
d'exposition
pour les aux
appareils
portables RF
pour
Cet équipement est conforme aux limites
d'exposition
rayonnements
IC établies
les Etats-Unis et le Canada établies pour un environnement non contrôlé.
pour
un environnement
contrôlé. Cettel
équipement
installéLa
et réduction
utilisé avec
Le
produit
est sûr pour unnon
fonctionnement
que décrit doit
dansêtre
ce manuel.
aux
expositions
peutdeêtre
augmentée
être conservé
aussicorps.
loin que
un minimum
deRF
20 cm
distance
entresilal'appareil
source depeut
rayonnement
et votre
possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie
la plus faible si une telle fonction est disponible.
Taiwan statement:
statement:
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停
用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
Caution:
Be aware of the following limits before using the Bluetooth Adaptor.
Do not subject the Bluetooth Adaptor to high temperatures, direct sunlight or
moisture.
Do not bend, or subject the Bluetooth Adaptor to strong impacts.
Do not disassemble or alter the Bluetooth Adaptor in any way.
Do not attempt to install the Bluetooth Adaptor in any incompatible device.
Do not remove the Bluetooth Adaptor from the TV’s during operations.
Data transmitted and received over radio waves may be intercepted and
monitored.
To avoid malfunctions caused by radio wave interface, keep the TV away from the
devices such as other wireless devices, microwaves and the devices that use 2.4
GHz signals when using the Bluetooth Adaptor.
Depending on the area, this Bluetooth Adaptor may not be available.
Setup the Bluetooth connection
The Bluetooth adapter is pre-installed in the TV set. No extra installation steps are
required for users. Follow the steps below to start using the feature of this
adapter:
1. Turn on your TV.
2. Switch to the channel that delivers 3D contents. If you are watching a disc with
3D contents, you will also need to activate your player for playing the disc.
3. Turn on your 3D glasses.
4. The 3D glasses will pair with this Bluetooth adapter automatically and are now
ready for use.
Specification
Specifications
Power supply
DC 3.3V
38.5mA(typical)
Antenna
Tx 1, Rx 1
Host Interface
USB 2.0 + GPIO x1
Standard Compliance
Bluetooth 3.0
Frequency Range
2.4 GHz (2.40GHz-2.4835GHz)
・GFSK
Modulation
・Pi/4 QPSK
・8DPSK
Receiver Sensitivity
Transfer rate (standard)
Output Power
Security
-88 dBm(typ.) GFSK, 0.1%BER
-85 dBm(typ.) for pi/4-DQPSK, 0.01%BER
3.0Mbps(MAX, Theoretical Value)
Class 2, 0dBm typical, class 2 device (-6dBm < output
power <4dBm).
BT E0/AES/SAFER+
* Transfer rate are theoretical values; however, actual communication rate will
vary according to communication environment or connected equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Keywords                        : 
Producer                        : PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)]
Create Date                     : 2011:11:14 18:15:45+08:00
Creator Tool                    : PDFCreator Version 1.2.0
Modify Date                     : 2011:11:15 17:55:01+08:00
Metadata Date                   : 2011:11:15 17:55:01+08:00
Document ID                     : 32a5bef1-1105-11e1-0000-0a609b50ed7d
Instance ID                     : uuid:5d612e69-62fa-486a-bbd4-b207a3e15f58
Format                          : application/pdf
Title                           : BT Manual _type approval_ v0.01_20111114
Creator                         : Teresa
Description                     : 
Description (x-repair)          : ()
Page Count                      : 5
Subject                         : 
Author                          : Teresa

EXIF Metadata provided by EXIF.tools