Wistron NeWeb GDE220 In-Home-Display User Manual gen 1 01 en display manual DRAFT 2011 03 29x

Wistron NeWeb Corporation In-Home-Display gen 1 01 en display manual DRAFT 2011 03 29x

User Manual

DOCUMENT TRACKING – REMOVE THIS SECTION BEFORE FINAL PRODUCTION Date By Notes 3/18/2011 Kevin Lewis Updates following changes in screen flow and new requirements for U.S. Changes since last posting are highlighted yellow. Information I need help with is highlighted red. 3/22/2011 Kevin Lewis Updates following feedback from Dalei. 3/29/2011 Kevin Lewis Add versioning and new message content.
In-Home Display DE220-1 DE220-1-A
Table of Contents Introduction 1 Display Overview 2 Installation 5 Monitoring Your Energy 11 Smart Controls 16 Messages 17 Common Z-Wave Tasks 19 Network Inclusion Process 19 Network Exclusion Process 20 Making Changes to Your Configuration 22 Safety Information 27 About GreenWave 31
1 Introduction The GreenWave Reality platform helps create a smart, energy-efficient home through the monitoring and controlling of your appliances and electronics (referred to as “devices”). You can conserve energy with minimal impact to your lifestyle by using our products to easily manage your devices. Simply connect our Gateway to your GreenWave Reality energy management system, plug your devices into our PowerNodes, and then monitor and control the devices’ power usage through a Web browser, smartphone application, or In-Home Display.
Display Overview The GreenWave Reality In-Home Display connects to your energy management system to show you information about your energy consumption and billing and allows you to forecast future usage and costs. If you have GreenWave Reality PowerNodes connected to you network, you can also use the Display to activate your system’s default Smart Controls. Your Display is designed to work either as part of a GreenWave Reality energy management system (with a Gateway and PowerNodes) or through a Gateway that connects directly with your utility meter. If you are using your Display through the Gateway and meter, be sure to read any additional documentation that your utility provider may have provided.
3 1. Left and right buttons: Press to move backward (left button) and forward (right button) through the screens. 2. Home Smart Control / menu select button: Press to activate the Home Smart Control. If the Display is in setup mode, press to save the selected option or to start the selected process on the screen. 3. Away Smart Control / menu exit button: Press to activate the Away Smart Control. If the Display is in setup mode, press to exit back to the previous menu or to presentation mode (if the Display is already showing the top menu). 4. Night Smart Control / down button: Press to activate the Night Smart Control. If the Display is in setup mode, press to scroll down through the options for the selected setting. If the Display is in presentation mode, press to navigate down to the next information screen. 5. Menu activation / up button: Press to activate the setup menu. If the Display is in setup mode, press to scroll up through the options for the selected setting. If the Display is in presentation mode, press to navigate up to the previous information screen. 6. Wall-mounting holes: If you are mounting the Display on a wall, slide these holes over the wall screws. 7. Kickstand: If you are placing the Display on a shelf or other surface, extend the kickstand to sit the Display upright. 8. Battery compartment: If you are powering the Display with batteries, slide the cover off and insert four (4) AA alkaline (LR6) batteries. 9. AC adapter port: If you are powering the Display with the AC adapter (included with some models), plug the adapter into this port. IMAGE: Back of Display with Numbered Callouts 1 3 4 5 2
5 Installation You must follow several installation steps before you can begin using your Display. 1. Set up and Configure Your Gateway Make sure your GreenWave Reality Gateway is set up and configured so that the Display can communicate with it. Refer to the GreenWave Reality Gateway User Guide for instructions on adding the Gateway to your energy management system and configuring any PowerNodes or other power management devices that you may have received. If your solution includes electricity meter monitoring, then refer to any documentation and instructions you may have received from your utility provider for connecting the meter.
IMAGE: Insert illustration here that shows and angle view of the Display with the kickstand extended. Uses arrows by the kickstand the indicate the direction to open the kickstand. 2. Mount the In-Home Display There are two options for mounting your Display: • Kickstand, for setting the Display on a shelf or other flat surface • Wall mount, for hanging the Display on a wall Whichever mounting option you choose, be sure to select a location where your Display will maintain clear radio signals with your Gateway. Refer to the installation tips later in this chapter for more information on maintaining clear radio signals. Using the In-Home Display Kickstand The kickstand is attached to the back of the Display. Simply locate a flat surface where you want to sit the Display, and extend the kickstand so that the Display sits upright. Mounting the In-Home Display on a Wall To mount the Display on a wall, you will need two {???screw type and size???} screws. Screw the screws into the wall, level with a distance of {???} between the center point of the two screw heads.
7 Note: If you are powering the Display with batteries, you should install the batteries before mounting the unit to the wall. Powering the unit is discussed in the next step. Hang the Display by sliding the holes on the back of the unit over the screws and then gently pressing the Display downward until it is secure. 3. Power the In-Home Display There are two options for powering your Display: • Four (4) AA alkaline (LR6) batteries • AC adapter (included with some models) Note: You cannot use both options at the same time. Do not plug in the AC adapter if there are batteries in the Display. IMAGE: Insert illustration here that shows Display mounting on wall via screws, include distance of screws based on holes on back of Display. Insert new illustration on the left as well.
IMAGE: Insert illustration here that shows plugging AC adapter into Display and an outlet. The Display automatically turns on as soon as you install batteries or plug in the AC adapter. Installing and Replacing Batteries To power the Display by batteries, use four (4) AA alkaline (LR6) batteries (included with your Display). Slide the cover off the back of the unit, insert the batteries as shown in the illustration, and then replace the cover. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Using the AC Adapter You can power the Display from an electrical outlet using the AC adapter (included with some models). Be sure to remove any batteries that may be in the Display before using the AC adapter. IMAGE: Insert sequence of illustrations here that show back cover coming off and the insertion of batteries (including number and size) with arrows showing + and - direction of batteries.
9 4. Select the Display Language When your Display powers on for the first time, it prompts you to select a language. Press the up and down buttons ( ) to scroll through the available languages, and then press the select button ( ) when the screen shows your preferred language. 5. Connect to the Gateway Note: If your Display came as part of a package that includes a Gateway, then you can skip this step since the Display was already connected to the Gateway at the factory. If your Display does not already have an established network connection with your Gateway, then NO CONNECTION appears on the screen. To connect the Display to your Gateway, you must place your Gateway in network inclusion mode and then press the activation button ( ) on the Display. For specific instructions, refer to the Common Z-Wave Tasks chapter and follow the network inclusion process. When the Display connects successfully, the screen shows the message CONNECTED. If the connection process should fail, the screen shows the message UNSUCCESSFUL. If this happens, you can press the select button ( ) to try connecting again.
Installation Tips Review the safety information. Be sure to review the information contained in the “Safety Information” chapter for important safety information you should follow. Keep radio signals clear. Your Gateway and Display have antennas built-in for radio communication with Internet services and other devices on your energy management system. Just as you might experience reception problems on your mobile phone inside a building, your Display can have trouble communicating with the Gateway if their radio signals are blocked by obstacles such as large metal panels or walls containing wire mesh. When placing these devices in your home, imagine invisible lines connecting between them. Try to keep these lines clear from obstruction as much as possible.
11 Monitoring Your Energy When the Display is in standard presentation mode, it cycles through each of the presentation screens to show you the following information: • Your current energy cost (if available) and usage • Your projected energy cost and usage for the day • The cost of your energy per kilowatt hour (KWh) You can drill down into any of these screens to view more information by pressing the left and right buttons on the Display. Continue pressing these buttons until you are on the screen for which you want more information. When you press a left or right button, the Display exits presentation mode, allowing you to drill down into the current information screen.
When you drill down into the information screens, the bottom button icons change from presentation mode icons to the following: Exit button: Press to exit the information screen and return to presentation mode. Up and down buttons: Press to scroll through more information screens for the current selection. No Service If the Display is connected to your Gateway, but it cannot find your utility service, then NO SERVICE appears on the screen. You can press the activation button ( ) to refresh the Display and try to obtain your service information again. If you continue to experience no service, try the following: • Make sure the Display has a connection with the Gateway (discussed in the Making Changes to Your Configuration chapter). • If there is no Gateway connection, perform the exclusion process followed by the inclusion process (discussed in the Common Z-Wave Tasks chapter).
13 • If you still encounter problems, you can try resetting the Display (discussed in the Making Changes to Your Configuration chapter). Current Cost and Usage To view your current energy cost (if available) and usage, press the left or right Display buttons until the CURRENT screen appears. In addition to this current information, you can view cost and usage information for the entire day, previous week, and previous month by pressing the up and down buttons while on the CURRENT screen. 1. Gauge shows how your usage for the selected timeframe compares with your average usage. The closer the indicator is to the left side of the gauge, the lower your current usage is, as compared to your average. The closer the indicator is to the right side, the higher your current usage is, as compared to your average. 2. KWh shows how much energy you are using in kilowatt hours for the selected timeframe. 3. Timeframe shows the duration over which the information is based. Available timeframes include the entire day, previous week, and previous month. Press the up and down buttons to access these other timeframes. 4. Icon shows network status. A broken circle means the Display is not connected to the Gateway. A full circle means the Display is connected but no service is available. A full circle with G means the Display is connected and service is available. 5. Cost shows your total cost for energy used during the selected timeframe. 1 3 5 2 4
Projected Cost and Usage To view your projected energy cost and usage for the day, press the left or right Display buttons until the PROJECTED screen appears. In addition to the projected information for the day, you can view projected energy cost and usage information for the week and month by pressing the up and down buttons while on the PROJECTED screen. 1. KWh shows how much energy you are projected to use in kilowatt hours for the selected timeframe. 2. Timeframe shows the duration over which the projected information is based. Available timeframes include day, week, and month. Press the up and down buttons to access these other timeframes. 3. Icon shows network status. A broken circle means the Display is not connected to the Gateway. A full circle means the Display is connected but no service is available. A full circle with G means the Display is connected and service is available. 4. Cost shows your projected total cost for energy used over the selected timeframe. 2 4 1 3
15 Price per KWh To view the price of your energy per kilowatt hour, press the left or right Display buttons until the $ PER KWH screen appears.
Smart Controls If you have GreenWave Reality PowerNodes connected to your home network, you can use your Display to activate the Home, Away, and Night default Smart Controls. The following buttons activate each of the Smart Controls: Home: By default, the Home Smart Control powers on all of the devices that are plugged into your PowerNodes. Away: By default, the Away Smart Control powers off the devices that are plugged into your PowerNodes that are not considered special devices (devices that you typically would not want to power off, such as a clock or DVR). Night: The Night Smart Control is similar to the Away Smart Control in that it powers off the devices that are plugged into your PowerNodes that are not considered special devices. Note: These buttons are available when the Display is in standard presentation mode. If the Display is in setup mode you can return to presentation mode by pressing the exit button ( ).
17 IMAGE: Display containing one of the options, such as DELETE. Messages If your utility provider has sent you a message, the Display alerts you in presentation mode by intermittently displaying a new message alert between presentation screens. To view the message press any button on the Display. If there are multiple messages, you can scroll through them by pressing the up and down buttons ( ). With a message showing on the Display, you can press the select button ( ) to view options related to the message. Possible options for the message might include: • SHOW AGAIN allows you to view the message again. • DELETE, when available, allows you to permanently remove the message from the Display. • YES and NO allow you to answer a question your utility provider has asked in the message. • Similar to YES and NO, there may be custom answers for you to answer a question.
To view the options for an active message, press the up and down buttons ( ). When the option you want to select (or the answer you want to send back to your utility provider) is visible on the Display, press the select button ( ). When you have finished viewing your messages, you can return to standard presentation mode by pressing the exit button ( ).
19 Common Z-Wave Tasks The Display communicates wirelessly with your Gateway by use of Z-Wave mesh networking, which is a robust connection technology designed for home automation with security and privacy in mind. The more Z-Wave compatible devices installed in your home, the better coverage your private home network will have. Network Inclusion Process The process for adding a Display to your home network is called “inclusion.” It must only be performed once and only if your Display is not already connected to the Gateway (for example, through the installation process). You must have your Gateway plugged in and working first. Also make sure the Display is powered, as explained in the Installation chapter. To complete the inclusion process you must perform the following steps: 1. On your Gateway, press and hold the sync button for two seconds until the two rotating green bars appear on the Gateway activity indicator. When this is completed, the Gateway is ready for you to perform the inclusion on the Display. The remaining
steps are performed on the Display. 2. Make sure you are on the JOIN NETWORK screen, as explained in either the Installation chapter or the Making Changes to Your Configuration chapter. 3. Press the select button ( ) to have the Display start the connection process. 4. When the Display connects successfully, the screen shows the message CONNECTED. If the screen shows the message UNSUCCESSFUL, then the inclusion process has failed, and you must start over. Network Exclusion Process Note: If your Display is new and has never been used before, then you should not need to perform the exclusion process. The process for removing a Display from your home network is called “exclusion.” You would perform a network exclusion for such situations as: • You are permanently removing your Display from your energy management system. • Your Display was previously used on a different Z-Wave network, and you must remove its association (homeID) with the other network before you can connect it to your energy management system. • You need to send your Display in for servicing.
21 Make sure the Display is powered, as explained in the Installation chapter. To complete the exclusion process you must perform the following steps: 1. On your Gateway, press and hold the sync button for five seconds until the rotating green single bar appears on the Gateway activity Indicator. When this is completed, the Gateway is ready for you to perform the exclusion on the Display. The remaining steps are performed on the Display. 2. Make sure you are on the LEAVE NETWORK screen, as explained in the Making Changes to Your Configuration chapter. 3. Press the select button ( ) to have the Display start the exclusion process. 4. When you are prompted to confirm, press the select button ( ) again. 5. When the Display disconnects successfully, the screen shows the message COMPLETED. If the screen shows the message UNSUCCESSFUL, then the exclusion process has failed, and you must start over.
Making Changes to Your Configuration If you want to make changes to your Display’s configuration, you can access the menu by pressing the menu activation button ( ). After the Menu screen appears momentarily, the Display enters setup mode. Once you are in setup mode you can press the left and right buttons to move back and forth through the menu screens. The bottom button icons change from presentation mode to setup mode icons as follows: Menu activation button: Press to activate setup mode from presentation mode. Once in setup mode, press when on any setting to view information or select an option for that setting. The up and down buttons then become available so that you can navigate through the setting’s options. Select button: Press to save the selected option or to start the selected process on the screen. This button is not available on screens that are for information only.
23 Exit button: Press to exit setup mode and return to presentation mode. Any changes that you saved will be kept. Up and down buttons: Press to scroll through the options available for the selected setting. As you press the left and right buttons on the Display, you advance through the following settings. The initial value you see for each setting is the current value for that setting. Presentation Speed (Slide Delay) The Presentation Speed (Slide Delay) setting allows you to change the duration for which each screen appears when the Display is in presentation mode (showing information screens on your energy cost and consumption). Press the up or down button to increase or decrease (or stop) the number of seconds that each screen appears in presentation mode. When the screen shows your preferred speed, press the select button.
Device Information The Device Information setting is for information only and shows the Display’s battery information, software version, serial number, and Z-Wave HomeID. Press the up and down buttons to scroll through each information screen. Battery information shows the approximate percentage of remaining battery life, both numerically in the left box and visually in the top gauge. If the battery life drops below 10%, then LOW appears in the right box and a battery icon flashes on the screen. If you are using the AC adapter instead of batteries, the screen simply confirms that external power is being used. Language The Language setting allows you to select the language in which you want screen text to appear. Press the up and down buttons to scroll through the available languages. When the screen shows your preferred language, press the select button.
25 Connection to Gateway The Network setting allows you to view the Display’s network connection status with your Gateway and to make any needed changes to the Display’s connection status. If your Display has an active network connection with your Gateway, then OK appears on the initial Network setting screen. If your Display does not have an active connection, then you can press the menu activation button to access the join network option. When you do so, JOIN NETWORK appears on the screen. To connect the Display to your Gateway, you must place your Gateway in network inclusion mode and then press the select button on the Display. For specific instructions, refer to the Common Z-Wave Tasks chapter and follow the network inclusion process. When the Display connects successfully, the screen shows the message CONNECTED. If the connection process should fail, the screen shows the message UNSUCCESSFUL. If this happens, you can press the select button to try connecting again. If your Display has an active network connection, then REFRESH appears as you navigate up and down the connection setting. On this screen you can press the select button to perform a service query with your Gateway and refresh the screen data if there is an update. Also if your Display has an active network connection, then LEAVE NETWORK appears as you navigate up and down the connection setting. This screen allows you to disconnect from your Gateway. If you need to disconnect from the Gateway, refer to the Common Z-Wave Tasks chapter and follow the network exclusion process.
The ALL RESET screen allows you to reset your settings to the factory defaults. This action is helpful if you are not able to perform a successful exclusion from the Gateway or if you simply want to revert back to the factory settings for such items as slide delay or language. If you select this option, the Display prompts you to confirm the reset process. Press the select button to continue, or press the exit button to escape without resting the Display. Exit Setup After the final setup screen, the Display shows the Exit Menu screen. Press the select button to exit setup mode and return to standard presentation mode. Note: You can also press the exit button at any time to return to presentation mode.
27 Safety Information Powering Your Display POWER ONLY WITH EITHER AC ADPATOR OR BATTERIES. NOT BOTH AT THE SAME TIME. Remove the batteries when the Display is powered with the AC adapter. A deeply discharged battery can cause damage to the device. Batteries Use only alkaline LR6 AA batteries. WARNING: Batteries can explode, or leak, and can cause injury or fire. To reduce this risk: • Carefully follow all instructions and warnings on the battery label and package. • Always insert batteries correctly with regard to polarity (+ and -) marked on the battery and the equipment. • Do not short battery terminals.
• Do not mix old and new batteries. Replace all of them at the same time with new batteries of the same brand and type. • Remove dead batteries immediately and follow local regulations for safe disposal. • Do not dispose of batteries in fire. • Keep batteries out of reach of children. • Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools, etc. The US Department of Transportation Hazardous Material Regulations (HMR) actually prohibits transporting batteries in commerce or on airplanes (i.e. packed in suitcases and carryon luggage) UNLESS they are properly protected from short circuits. So when transporting individual batteries, make sure that the battery terminals are protected and well insulated from materials that could contact them and cause a short circuit. Liquid Crystal Display (First Aid Measures) The viewing screen in your Display is of a liquid crystal display type. It is protected inside a glass enclosure which may break if dropped or subjected to extreme mechanical force. In such an event, use the following first aid measures: • If liquid crystal comes in contact with your skin: Wash area completely with plenty of water. Remove contaminated clothing.
29 • If liquid crystal gets into your eye: Flush the affected eye with clean water, and then seek medical attention. • If liquid crystal is swallowed: Flush your mouth thoroughly with water. Drink large quantities of water and induce vomiting. Then seek medical attention. Indoor Use Only Your Display should be used only in dry, indoor locations. Do not use your Display in high-humidity locations such as greenhouses, saunas, washrooms, or patios. Do not use your Display in locations where it can get wet such as near aquariums or running water. Keep your Display dry, and keep it away from radiators and other heat sources. Do Not Disassemble Your Display has no user-serviceable parts inside. In case of persisting malfunction, please contact Customer Service to arrange for repair at a certified service location. Do not attempt to disassemble the Display for any reason.
Arrange for Service if Needed Should you encounter any problems with your Display, turn the device off by unplugging it from the electrical outlet and/or removing any batteries. Contact Customer Service to arrange for repair at a certified service location under the following conditions: • When the power cable or plug is damaged or frayed • If the product has been exposed to rain or water • If the product casing has been damaged Disposing of Your Used Product This product complies with the WEEE Directive (2002/96/EC) marking requirements. The affixed label indicates that you must not discard this electrical / electronic product in domestic household waste. WEEE Product Category. With reference to the equipment types in the WEEE Directive Annex 1, this product is classed as category 3 “IT and Telecommunications Equipment.” DO NOT DISPOSE IN DOMESTIC HOUSEHOLD WASTE. To return unwanted products, contact your local GreenWave Reality office for more information (see contact information in the back of manual).
31 About GreenWave GreenWave Reality is a global innovator in the emerging Home Energy Management market. GreenWave Reality provides an affordable, easy-to-use, standards-based platform that allows utilities enhance their relationship with consumers and better balance energy on the grid while consumers can conserve energy with a minimal impact to their lifestyle by easily monitoring and controlling their appliances and adding intelligent LED lighting. GreenWave Reality is led by a diverse team of proven leaders with global experience. NORTH AMERICA 39 Parker, Suite 100 Irvine, CA 92618 USA Tel. +1 714 805 WAVE (9283) na@greenwavereality.com EUROPE GreenWave Reality ApS. Dr. Neergaardsvej 3 2970 Hørsholm DENMARK Tel. +45 6913 2333 eu@greenwavereality.com ASIA-PACIFIC 41 Science Park Road #01-01 The Gemini (Science Park II) SINGAPORE 117610 Tel. +65 3157 1700 apac@greenwavereality.com
Document Version 1.01 Model DE220-1 DE220-1-A Wireless Network Features Z-Wave Radio Frequency: EU: 868.42MHz US: 908.42MHz, AUS/NZ: 921.42MHz Z-Wave Maximum Inter-Node Range: Up to 30m Z-Wave Command Classes Certified Binary Switch Multichannel Firmware Metadata
33 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instruction as documented in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Declaration(s) of Conformity These CE Marked GreenWave Reality products incorporating Radio and Telecoms Terminal Equipment functionality are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the original CE Declaration of Conformity is on file and available upon request for all CE Marked GreenWave Reality products. Please visit www.greenwavereality.com to obtain a copy of the Declaration.
35 The use of such device might not be harmonized throughout EU and EFTA Member States. The Final Integrator of the product shall check that the use of such devices for power node are allowed for placing on the market in any particular Member State.
www.greenwavereality.com

Navigation menu