Wistron NeWeb IDA201 Outdoor PoE IP camera User Manual Technical

Download:
Mirror Download [FCC.gov]
Document ID	3168136
Application ID	EAPDROzoLfvNAOCPX3m4sw==
Document Description	Technical - User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	122.77kB (1534594 bits)
Date Submitted	2016-10-19 00:00:00
Date Available	2017-04-17 00:00:00
Creation Date	2016-09-07 10:24:04
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2016-10-13 17:44:51
Document Title	Technical - User manual
Document Creator	Microsoft® Office Word 2007
Document Author:	10401010

FHD251E IP Camera
User Manual
Table of Contents
FCC STATEMENT ............................................................................... 1
SAFETY PRECAUTIONS ..................................................................... 3
INTRODUCTION ...................................................................... 5
1.1
1.2
1.3
START USING THE CAMERA .................................................. 11
2.1
2.2
2.3
PACKAGE CONTENTS ............................................................... 5
KEY FEATURES ....................................................................... 6
HARDWARE OVERVIEW ........................................................... 7
ASSEMBLING THE CAMERA & THE WIRELESS ADAPTER ................ 11
CONNECTING THE CAMERA TO A NETWORK............................... 14
REBOOTING AND RESETTING THE CAMERA ................................ 15
APPENDIX ............................................................................. 16
3.1
3.2
3.3
3.4
SPECIFICATIONS AND COMPLIANCE .......................................... 16
TROUBLESHOOTING .............................................................. 18
OBTAINING TECHNICAL SUPPORT ............................................ 19
DISPOSAL INSTRUCTIONS ....................................................... 19
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
FCC Radiation Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with minimum distance of 20 cm between the
radiator & your body.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority
to operate this equipment.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Safety Precautions
Please read this user manual before operating this product. The
information contained in this document is subject to change without
notice. Features or specifications may be different depending on the
type of product model purchased.
Safe Use of This Product
Carefully follow the warnings and safety notices presented within this
manual. Please pay special attention to the following indications of
potentially hazardous situations:
Warning: Indicates a hazardous situation, which, if not avoided, could
result in serious injury.
Caution: Indicates a situation, which, if not avoided, could damage
this product or other devices.
Note: Indicates additional user information to make the user aware
of possible problems and to help the user understand, use, and
maintain the product.
•
•
•
•
•
•
•
•
•
•
•
This product needs only an occasional wipe with a dry cloth.
Avoid high-moisture conditions and keep away from liquids and
humidity.
Do not install or use the product where it is exposed to direct
sunlight or heat.
Care must be taken when using the device in close proximity to
personal medical devices, such as pacemakers and hearing aids.
Do not use this product in environments where there are
potential explosion hazards.
The product must be placed horizontally on a hard, flat surface
or installed firmly with wall-mount kits. Do not place the
product where it may be subject to physical shock or vibration
or where the product may drop, topple, slide, or shake; this
may cause personal injury or damage to the product.
If lightning is expected, or the product is not going to be used
for a long period of time, unplug the power cord from the unit.
The use of electronic transmitting devices in aircraft, hospitals,
and petrol stations is forbidden. Please follow the rules and
warnings in these conditions.
The product must ONLY be used with the power supply cord
and power adapter supplied by the manufacturer.
Openings on the housing of the product are required for
ventilation. Do not block or obstruct the air flow through these
openings.
Do not operate the product on a soft surface such as carpet,
rug, bed, etc.
1 Introduction
1.1
Package Contents
Thank you for purchasing this product. Before using the FHD251E
IP Camera (referred to in this manual as “the camera”), please
confirm that the packaging includes the following items and
accessories:
 FHD251E IP Camera
 WFB100S Wireless Power over Ethernet (PoE) Adapter (referred
to in this manual as “the wireless adapter”)
 Camera bracket & screws
 User manual
1.2
Key Features
FHD251E
•
•
•
•
•
•
•
•
•
•
•
Full HD 1080p @ 30 fps (1920 × 1080)
Visualization in total darkness up to 15 meters
Switchable IR cut filter for vivid color during the daytime
Light sensor to automatically detect ambient light conditions
Motion detection
Digital PTZ
HDR
LDC
Power over Ethernet
Waterproof IP65
Easily connects to home-network environments
WFB100S
•
•
•
•
•
Internal Power Module, V-in: 120 V, V-out: 48 V
Wi-Fi: 2.4 GHz IEEE 802.11n 2 × 2
RJ45 Ethernet connection
IEEE 802.3af–compliant
WPS for easy network pairing
1.3
Hardware Overview
FHD251E
Front view
Cap
IR lens
Light guide
Status LED
Speaker
Rear view
Cap
Microphone
Ball joint
LED functions
LED Color
Red
Blue
Green
Green
Green
Function Description
Pre-boot
Operating system
booting
Post-boot; no network
connectivity
Standby; encoder
recording locally
Streaming to the
network
Status
Solid on if “power OK”
Blinking 1 Hz, 50% duty
cycle
Blinking 4 Hz, 50% duty
cycle
Solid on
Blinking 1 Hz, 50% duty
cycle
WFB100S
Light guide
Button
Ethernet port
LED functions:
LED color Function description
Blue
Normal operation and
connected
Blue
Power up and during
firmware download
Blue
Firmware download
complete but no
connectivity
Blue
WPS mode activated
Status
Solid on
Fast blinking, 4 Hz, 50%
duty cycle
Slow blinking, 1 Hz, 50%
duty cycle
Off
10
2 Start Using the Camera
2.1
Assembling the Camera & the Wireless
Adapter
Follow the steps below to set up your camera hardware and ensure
that the camera operates properly.
1.
Attach the camera bracket to the camera by gently tightening it
onto the camera.
Caution:
Ensure that the camera is securely fixed;
otherwise it may fall and cause damage
or injury.
11
2.
Remove the grommet and the cap on the rear side of the
camera.
3.
Insert the Ethernet cable into the camera’s Ethernet port and
connect the other end to the wireless adapter, then place the
grommet back and screw on the cap.
12
4.
Plug the wireless adapter into an electrical outlet.
13
2.2
1.
2.
3.
Connecting the Camera to a Network
After inserting the Ethernet cable into the camera’s Ethernet
port and connecting the other end to the wireless adapter, the
adapter will be able to supply power to the camera when
plugged into a wall outlet.
Press the WPS button of the AP that you want to connect to,
then press the adapter’s button to connect to the AP. Once the
Wi-Fi of the wireless adapter is paired with an AP via WPS, the
camera then connects to the network through the wireless
adapter.
The IP camera has been successfully added to your network after
the connection between the wireless adapter and your AP is
established.
The installation process is now complete. Now you may start using
the camera.
14
2.3
1.
2.
Rebooting and Resetting the Camera
and the Wireless Adapter
Press and hold the button on the wireless adapter for 0
seconds–3 seconds or over 20 seconds.
For factory reset, press and hold the button on the wireless
adapter for 10 seconds–20 seconds.
15
3 Appendix
3.1
Specifications and Compliance
Model
FHD251E
Resolution
IR LEDs
IR LED Illumination Range
Sensitivity
Sensors
Lens
Status LEDs
FOV
Operating Voltage
Ambient Operating
Temperature
Storage Temperature
Dimensions
Weight
IP Rating
PoE
1080p (1920 × 1080) @ 30 fps
12 pcs.
15 meters
0 lux when IR LED is on (black & white video).
CMOS 1/3” 4 megapixels
6 glass
1 pc (Tri color—red, blue, and green)
138° (D)
V-in: 48 V (DC)
–40 °C to +65 °C
–40 °C to +65 °C
77.05 mm × 115.97 mm × 79.2 mm
324 g
IP65
IEEE 802.3af
16
Model
WFB100S
CPU
2.4 GHz
SPI Flash Memory
DDR3
Status LEDs
RJ45
Operating Voltage
Ambient Operating
Temperature
Storage Temperature
Dimensions
Weight
RTL8196E
RTL8192ER
32 MB
128 MB
1 pc (Single color—blue)
10/100 mbps
V-in: 120 V (AC), V-out : 48 V (DC)
0 °C to +50 °C
–40 °C to +65 °C
91 mm × 57 mm × 44 mm
124 g
17
3.2
Troubleshooting
Problem
Solution
The button
has no
response.
The LED blinks
slowly after
the WPS
process is
completed.
1. Check the Ethernet connection status.
2. Plug out and plug in once to reboot the
wireless adapter.
1. Check the Ethernet connection status.
2. Restart WPS pairing and make sure the AP
router is in signal range and is in WPS mode.
18
3.3
Obtaining Technical Support
While we hope your experience with the FHD251E IP Camera is
enjoyable, you may experience some issues or have questions that
this User Manual has not answered.
If you have a problem with the FHD251E IP Camera, please contact us
at:
Tel.:+886 3 666 7799 Ext.: 3214
E-mail: Jacky.Liu@wnc.com.tw
Mobile: +886 916 324 575
Website: www.wnc.com.tw
3.4
Disposal Instructions
WNC is committed to responsible environmental stewardship. Please
dispose of this product in accordance with the local laws and
regulations in your area. Contact your local waste-disposal
authorities for relevant instructions.
19

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Extract
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2016:09:07 10:24:04+08:00
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2016:10:13 17:44:51+08:00
Metadata Date                   : 2016:10:13 17:44:51+08:00
Format                          : application/pdf
Creator                         : 10401010
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:41fbab55-75c9-4d75-a7a4-7444a4d0d2c5
Instance ID                     : uuid:b65b8520-fda2-4160-ac89-ecdb8abdb0e3
Has XFA                         : No
Page Count                      : 21
Language                        : zh-TW
Author                          : 10401010

EXIF Metadata provided by EXIF.tools