Wistron NeWeb KU8M 802.11b WLAN USB Adapter User Manual fcc

Download:
Mirror Download [FCC.gov]
Document ID	367665
Application ID	DJN2JyPKC5hA00nPM+i9Jw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	164.54kB (2056748 bits)
Date Submitted	2003-10-23 00:00:00
Date Available	2003-10-22 00:00:00
Creation Date	2003-10-09 16:37:03
Producing Software	Acrobat PDFWriter 4.0 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	穨fcc.PDF
Document Creator	穨Microsoft Word
Document Author:	穨Daphne Liu

802.11b WLAN USB Adapter with 128MB
Flash Disk
Model
KU8-M
User’s Guide
Version: 1.0 — Sept. 2003
Copyright Statement
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, whether electronic, mechanical,
photocopying, recording or otherwise without the prior writing of the publisher.
Windows™ 98SE/2000/ME/XP/CE are trademarks of Microsoft ® Corp.
Pentium is trademark of Intel.
All copyright reserved.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, (example - use only shielded
interface cables when connecting to computer or peripheral devices) any
changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Table of Contents
REGULATORY INFORMATION
1. WELCOME
1.1 KIT CONTENTS
1.2 PRODUCT FEATURES
1.3 WIRELESS NETWORKING SCENARIOS
1.4 ADVANTAGES FOR USING WIRELESS NETWORK
11
2. AS FLASH DISK
12
2.1 INSTALLATION
2.2 UNPLUG THE USB ADAPTER
12
14
3. AS WIRELESS NETWORKING
15
3.1 INSTALL THE IEEE802.11 B WLAN DRIVER / UTILITY
3.2 VERIFYING THE DRIVER /U TILITY
3.3 IEEE802.11 B WLAN UTILITY
3.4 BASIC SETTING FOR INFRASTRUCTURE M ODE
3.5 BASIC SETTING FOR 802.11AD HOC M ODE/AD HOC M ODE
3.6 ADVANCED S ETTINGS
3.7 ENCRYPTION FUNCTION
3.8 UNINSTALL THE IEEE802.11 B WLAN UTILITY / DRIVER
16
19
20
21
22
23
24
25
26
29
4. USING THE UTILITY
30
4.1 LAN STATUS TAB
4.2 LINK INFORMATION TAB
4.3 SITE S URVEY TAB
4.4 DIAGNOSTIC TAB
4.5 ABOUT TAB
30
31
31
32
32
3.1.1 ADDITIONAL SETUP PROCESSES
3.1.2 DISABLE WINDOWS XP ZERO-CONFIGURATION
5. NETWORK APPLICATION
33
5.1 SURVEYING THE N ETWORK N EIGHBORHOOD
5.2 FILE S HARING
5.3 USING THE SHARED FOLDER
33
34
35
6. PRODUCT SPECIFICATIONS
36
1. Welcome
Thank you for purchasing our 802.11b WLAN USB Adapter with 128MB Flash Disk,
and welcome to Wireless LAN—the easy way to wireless networking.
This user’s guide introduces to you the 802.11b WLAN USB Adapter with 128MB
Flash Disk and describes the most common configurations, which will help you
connect to your network easily.
Please read this manual to get familiar with the IEEE802.11b Wireless LAN. This
manual contains detailed instructions in operation of this product. Please keep this
manual for future reference.
As this product is designed to run under Microsoft Windows, it is recommended that
to be installed by people who are familiar with the installation procedures for network
operating systems under Microsoft Windows.
1.1 Kit Contents
The 802.11b WLAN USB Adapter with 128MB Flash Disk kit should include the
following items: One 802.11b WLAN USB Adapter with 128MB Flash Disk, one CD
and one Quick Start Guide.
a. One 802.11b WLAN USB Adapter with 128MB Flash Disk
b. One Software CD including:
1. Driver for support Windows 98SE
2. User Manual PDF File
c. Quick Start Guide
If any of the items mentioned above are damaged or missing, please contact your
distributor.
1.2 Product Features
A. Status LED
LED1 (Blue)
Off
Power Off.
The USB adapter is
Powered on and searching
for AP before connecting
Blinking
Steady Blue
Wireless
linked.
connection
LED2 (Green)
Power off or in Standby /
Power saving
The memory disk is in
Read / Write processing
(busy state)
is N/A
B. USB Connector
C. Switch
On: The radio (wireless function) is on.
Off: The radio (wireless function) is off.
802.11b WLAN USB Adapter with 128MB Flash Disk features:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
High-speed wireless connection, up to 11 Mbps
IEEE802.11b (DSSS) standard for 2.4 GHz Wireless LAN
Plug-and-Play
Solid design with an integrated antenna
Full mobility and seamless cell-to-cell roaming
Automatic scale back at per packet level
Dual mode Application (Memory & WLAN)
Pen Driver mode only (radio off)
Radio ON/Off Switch
Supports security & Boot up function
802.11b WLAN USB Adapter with 128MB Flash Disk supports:
1. Automatic load balancing for optimized bandwidth
2. Advanced power management
3. No driver required for Windows 2000 / ME / XP
4. Support Windows 98 / 98SE with device driver
1.3 Wireless Networking Scenarios
As our 802.11b WLAN USB Adapter with 128MB Flash Disk is interoperable and
compatible with other IEEE 802.11b compliant products from other manufacturers, it
offers you the most freedom to establish your ideal wireless network. Therefore,
after installing 802.11b WLAN USB Adapter with 128MB Flash Disk, you can
connect your computer to:
a. A Peer-to-Peer Workgroup of IEEE802.11b compliant wireless devices.
b. A LAN (Local Area Network) constructed by Access Point(s) or other
IEEE802.11b compliant systems.
c. Share your Internet access by using just one connection, share printers and other
peripheral devices, share data and image files between networked PCs, play
multi-player games, and use other network enabled sharing resources.
A. Peer-to-Peer Networking:
An Ad Hoc Network could be easily set up with some PCs and this 802.11b
WLAN USB Adapter with 128MB Flash Disk or our other WLAN devices.
Therefore, it is very suitable to build a network for temporary use, such as for
demonstration in exhibition, for new sales point/branch use and alike.
B. Cooperate LAN (Local Area Networking):
With some 802.11b WLAN USB Adapter with 128MB Flash Disks and Access
Points, it is easy to construct a LAN with access to Internet for enterprise use.
The construction is quite easy that the 802.11b WLAN USB Adapter with 128MB
Flash Disk and Access Point will automatically work at the most suitable
frequency when Access Point is set within the proper range.
In addition, commonly manufacturers will bundle the Site-Survey tool for users to
check the communication quality.
10
1.4 Advantages for Using Wireless Network
802.11b WLAN USB Adapter with 128MB Flash Disk can wirelessly transmit and
receive data, minimizing the need for wired connections, at a speed of up to eleven
megabit per second. With the 802.11b WLAN USB Adapter with 128MB Flash Disk
you can locate your PC wherever you want without wires and cables.
The 802.11b WLAN USB Adapter with 128MB Flash Disk provides LAN users with
an access to real-time information anywhere in their organization. The mobility
provides effectiveness and efficiency, which are not available under wired networks.
The 802.11b WLAN USB Adapter with 128MB Flash Disk configuration is easy to
switch between peer-to-peer networks, suitable for a small number of users, and full
infrastructure networks of thousands of users that allow roaming around a broad area.
Therefore, you may see many advantages for adopting Wireless Networking as
follows:
Less Space Limits: The 802.11b WLAN USB Adapter with 128MB Flash Disk
provides access to network services without wires; therefore, it gives you more
freedom to allocate and style your living and working space. In addition, in some
areas where is hard or expensive to connect to wired networks, such as historic
buildings, classrooms or mobile connectivity, then you can count on wireless
networking.
Flexible Workgroups and Lower Cost: For workspaces that are frequently
reconfigured for temporarily use such as demo in exhibitions, wireless
networking is easy to set up of lower total cost—and all equipments are
recyclable. You do not have to remove the old wires and then build up the new
ones again and again.
Networked Conference Rooms: Users can access the network as they move from
a meeting to another, getting the access to information/data and the ability to
communicate decisions while “on the go”.
Ad Hoc Networking: On site consulting and small workgroups may increase
productivity with quick network setup and collaboration software.
Branch office Networking: With an Access Point to bridge between the LAN and
Internet, wireless networking provides an easy to install, use and maintain
network for a remote or sales office.
Campus-Wide Network Mobility: The roaming capabilities allow enterprise to set
up easy to use wireless networks that cover the entire campus transparently.
11
2. As Flash Disk
2.1 Installation
1. Insert the 802.11b WLAN USB Adapter with 128MB Flash Disk into the USB port
of your PC/Notebook.
2. It automatically detects the hardware.
3. Click Cancel.
4. Double click My Computer in your desktop.
You may see now 2 removable Disks above:
12
Disk (E:): Free memory for your usage.
Disk (F:): Packaged with a Zip file of 802.11b WLAN USB Adapter Driver.
Note! For Window 98/98SE, user should install hardware driver attached in the
CD firstly, and then can detect the USB Adapter.
Note! The WLAN function of this adapter don’t support in Linux and Mac
environment so you should switch “off” the radio to disable WLAN
while you are using the USB adapter as flash disk.
13
2.2 Unplug the USB Adapter
You can remove the device after you finished the action with the device. However,
in Windows XP/ME and Windows 2000, please follow the safe removal procedure.
You can find a safe removal icon in your computer’s notification area.
1. Double click the safe removal icon.
2. The “Unplug or Eject Hardware” window will pop up. You can select the
device you want to remove. Then, click the Stop button.
3. You can unplug the device from the USB port of your computer.
14
3. As Wireless Networking
This section will lead you through the installation of 802.11b WLAN USB Adapter
with 128MB Flash Disk and IEEE802.11b WLAN software in detail. People who
are familiar with the installation and settings of wireless device may refer to quick
start guide to establish a network in a snap.
To establish your wireless network connection, the following steps should be
executed:
1. Install the WLAN driver embedded in the 802.11b WLAN USB Adapter with
128MB Flash Disk.
2. Install the required network protocols to communicate with your network.
Mostly, you will need to set the TCP / IP protocol.
The product is designed to operate under Windows 98SE, ME, 2000, XP and
Windows CE (subject to availability). The installation procedure is about the same.
Please follow up the installation wizard provided by your system to install the
software.
15
3.1 Install the IEEE802.11b WLAN Driver / Utility
1. Insert the 802.11b WLAN USB Adapter with 128MB Flash Disk into the USB
port of the PC. Search the removable disk that packaged with a Zip file
(KU8-M) –the 802.11b WLAN driver. Unzip KU8-M and double click file
setup.exe.
2. Click “Next”. Select “Install IEEE802.11b WLAN Driver and Utility” and
then click “Next” to go on the installation.
16
3. Click “Yes”.
4. Read the destination folder and click “Next”. The default destination folder
is displayed in the setup dialog box. Click “Next” to go on to Step 7. You
may cha nge the default folder by clicking “Browse” to select the destination
folder you prefer (go on to Step 6). Click “ Next” to go to the next screen.
17
5. Click “Next”.
6. Click “Yes”. You are asked whether to add an IEEE802.11b WLAN Utility
shortcut to your desktop. Click “Yes” to create one.
7. Click “Finish”. The installation is complete.
18
3.1.1 Additional Setup Processes
During software installation procedure, each operating system may prompt different
specific options. Mostly, you will be asked to add some necessary protocols and to
edit some networking settings.
1. Windows 98SE: The system may request the original Windows CD during the
installation process. Please check with the network administrator for the values
of the settings. When the installation is finished, you’ll have to restart your
computer.
2. Windows Me: Please check with the network administrator for the values of the
settings. Please restart your computer when the installation is finished.
3. Windows 2000: Please check with the network administrator for the values of the
settings. Select “Install the software automatically” when the window with this
option appears, and then click “Next” to continue installation.
4. Windows XP: Select “Install the software automatically” when the window with
this option appears, and then click “Next” to continue installation. Note that
before using the IEEE802.11b WLAN Utility, please disable the Windows XP
Zero-Configuration first.
19
3.1.2 Disable Windows XP Zero-Configuration
In Windows XP, it is recommended that you use the IEEE 802.11b WLAN Utility.
Right after the installation, before opening the Utility, please follow the steps below to
disable the Windows XP Zero Configuration:
1. Go to “Control Panel” and double click “Network Connections”.
2. Right-click “Wireless Network Connection” of 802.11b WLAN USB Adapter
with 128MB Flash Disk, and select “Properties”.
3. Select “Wireless Networks” tab, and uncheck the check box of “Use Windows to
configure my wireless network settings”, and then click “OK”.
20
3.2 Verifying the Driver/Utility
1. Windows 98SE/Me:
Step 1. Right-click “My Computer” icon on the desktop and choose “Properties”.
Step 2. Select “Device Manager” tab and open “Network adapters”. You should
see your 802.11b WLAN USB Adapter with 128MB Flash Disk in the list.
Highlight it and click “Properties” button.
Step 3. From the “Device status”, you should see the line “This device is working
properly”. If, instead, you see error messages displayed, please remove
this Adapter (highlight this Adapter and click “Remove” button). Restart
your PC and go through the installation process again.
2. WINDOWS 2000:
Step 1. Right-click “My Computer” icon on the desktop and choose “Properties”.
Step 2. Select “Hardware” tab and click “Device Manager”. Open “Network
adapters”. You should see your 802.11b WLAN USB Adapter with
128MB Flash Disk in the list. Right-click this Adapter and choose
“Properties”.
Step 3. From the “Device status”, you should see the line “This device is working
properly”. If, instead, you see error messages displayed, please uninstall
this Adapter (right-click this Adapter from the “Network adapters” list and
choose “Uninstall”). Restart your PC and go through the installation
process again.
3. WINDOWS XP:
Step 1. Click “Start>Control Panel> System”.
Step 2. Select “Hardware” tab, and click “Device Manager”. Open “Network
adapters”. You should see your 802.11b WLAN USB Adapter with
128MB Flash Disk in the list. Right-click this Adapter and choose
“Properties”.
Step 3. From the “Device status”, you should see the line “This device is working
properly”. If, instead, you see error messages displayed, please uninstall
this Adapter (right-click this Adapter from the “Network adapters” list and
choose “Uninstall”). Restart your PC and go through the installation
process again.
21
3.3 IEEE802.11b WLAN Utility
802.11b WLAN USB Adapter with 128MB Flash Disk has its own management
software, named IEEE802.11b WLAN Utility, and users can control all functions
provided with it. The Utility icon
appears in the Windows System Tray after
clicking the IEEE802.11b WLAN Utility shortcut on your desktop. The Utility
includes six tabs: LAN Status, Setting, Site Survey, Link Information, Diagnostic and
About.
The definition of the color of the Utility icon is as follows:
Connected (Green)
Low quality (Yellow)
Disconnected (Red)
In Ad Hoc mode, in one workgroup, the Channel and SSID of each station must be
the same—therefore they can communicate with each other within the local LAN
properly. Moreover, all connected computers should have the same net ID and subnet
ID.
To open IEEE802.11b WLAN Utility, you may double click the status icon in the
Windows System Tray.
22
3.4 Basic Setting for Infrastructure Mode
To connect with an Access Point, please follow the process below:
1.
Select the “Setting” tab
2.
Select “Infrastructure” for Network Type
3.
Select or enter the correct SSID
4.
Press the “Apply” button.
SSID is the group name that will be shared by every member of
your wireless network .You will only be able to connect with an
Access Point (AP), which has the same SSID. Note that the SSID
will be case sensitivity.
Channel is not active in Infrastructure Mode.
Profiles allows you to save five sets of default settings. After
entering the values of the settings (SSID, Network Type, Channel
etc.), set a name in the Profiles field. Click “Apply” button.
23
3.5 Basic Setting for 802.11Ad Hoc Mode
If you have more computers and only want to place them in a local area network, or
you want to communicate directly without using an Access Point or any connection to
a wired network, then you can select the “802.11 Ad Hoc” mode on your WLAN
Utility.
“802.11 Ad Hoc” is the official standard set by IEEE Organization.
A. 802.11 Ad Hoc
Please follow the procedures below to set the “802.11 Ad Hoc”:
1.
2.
3.
4.
Select “Setting” tab.
Select “802.11 Ad Hoc” for Network Type.
Type in the SSID and set a channel, which you want to use in your
802.11 Wireless LAN.
Press the “Apply” button.
Every member of your peer-to-peer network must set to the same
channel and SSID, which is case sensitive.
You must select a SSID if you use the 802.11 Ad hoc.
If you have trouble connecting other brands’ IEEE 802.11b devices using the
“802.11 Ad Hoc” mode, please try “Ad Hoc” mode. The next section shows
you the basic setting of the “Ad Hoc” mode.
24
3.6 Advanced Settings
Click the “Advance” button in the Setting page to edit the advanced settings for your
802.11b WLAN USB Adapter with 128MB Flash Disk.
Regarding the transmission rate, there are four options:
A.
B.
C.
D.
Fully Auto (Default)
Fixed 11Mbps
Fixed 5.5Mbps
Auto 1 or 2 Mbps
You may select and change transmission rate by clicking the pull-down button.
If you enable the “Power Saving” mode, the 802.11b WLAN USB Adapter with
128MB Flash Disk can work with low power consumption but the throughput may
slow down.
Note!
Power Saving Mode is useless in Ad Hoc mode.
25
3.7 Encryption Function
You may enhance the security of your network by enabling the “Encryption” function.
The WEP Required Mode enables you to define the encryption keys that your 802.11b
WLAN USB Adapter with 128MB Flash Disk should use.
Caution:
If you wish to enable the “Encryption” function, you must enable this function
for all computers of your network, and the WEP key needs to be the same for
all IEEE802.11b stations.
Follow the steps below to set your WEP Required Mode:
(1) Select one mode from the drop down menu of WEP required Mode and set
the WEP key. Four modes are available:
A. Manual 64 bits (ASCII)
B. Manual 128 bits (ASCII)
C. Manual 64 bits
D. Manual 128 bits
(2) Press “Apply” button when finish the WEP setting.
a. Select “Manual 64 bits (ASCII)” and enter a 5-digit WEP Key.
26
b. Select “Manual 128 bits (ASCII)” and enter a 13-digit WEP Key.
c. Select “Manual 64 bits” and enter a 10-digit WEP Key.
27
d. Select “Manual 128 bits” and enter a 26-digit WEP Key.
28
3.8 Uninstall the IEEE802.11b WLAN Utility / Driver
1. Make sure the Utility is closed.
2. Open Control Panel, and then click Add or Remove Programs >
IEEE802.11bWLAN Utility > Remove
3. Follow the uninstall wizard to complete the uninstallation.
4. Click “Finish” when uninstallation is completed.
29
4. Using the Utility
4.1 LAN Status Tab
If you want to know the connecting status in Infrastructure Mode or 802.11 Ad Hoc
Mode, choose LAN Status tab in IEEE802.11b WLAN Utility window.
1. Infrastructure Mode:
•
The SSID and MAC of the access Point, which your computer connects to,
will appear in the screen if you choose the Infrastructure Mode.
•
Double click the Access Point SSID (under the Infrastructure Mode) to access
to the Microsoft Network Neighborhood folder to find other on-line
computers.
•
You can see the status of the Link Quality and Signal Strength under the LAN
status page.
2. 802.11 Ad Hoc Mode:
•
The station Name and MAC address of your station will appear if you choose
the 802.11 Ad Hoc Mode.
•
Double click the right name to display the content of your computer or double
click Network Neighbors to access to the Microsoft Network Neighborhood
folder to find other on-line computers.
•
Click “Rescan” to find current available computers in the network.
30
4.2 Link Information Tab
The Link Information tab shows information of Current Channel, Current
Transmission Rate, Own MAC Address, Current Connection State, Wireless Network
Adapter IP Address, Wireless Network Adapter Subnet Mask, and Wireless Network
Adapter Default Gateway.
4.3 Site Survey Tab
This tab gives you all the information of each Access Point within the communication
range, so that you can select the Access Point with the strongest signal for better
performance.
31
4.4 Diagnostic Tab
Click “Start Diagnostic” button to check errors in hardware, firmware, and software
of your 802.11b WLAN USB Adapter with 128MB Flash Disk. In case of any
errors occur, please click “View Error details” button and print it out to present to
your dealer or distributor.
4.5 About Tab
This tab provides you the version information of Firmware, Driver and Utility.
32
5. Network Application
This section consists of the network applications of 802.11b WLAN USB Adapter
with 128MB Flash Disk, including:
b. To Survey the network neighborhood
c. To Share Your Folder with Your Network Member(s)
d. To Share Your Printer with Your Network Member(s)
e. To Access the Shared Folder(s)/File(s) of Your Network Members(s)
f. To Use the Shared Printer(s) of Your Network Member(s)
In fact, the network applications of 802.11b WLAN USB Adapter with 128MB Flash
Disk are the same as they are in a wired network environment. You may refer to the
following 3 examples of Surveying the Network Neighborhood, File Sharing and
Using the Shared Folder.
5.1 Surveying the Network Neighborhood
When multiple base stations are up and running in your wireless network, you can use
the procedure described below to display the other computers:
1. Double-click My Network Places to display all stations in your Microsoft
Windows Network Group.
2. To display other workgroups in the network environment, double-click Entire
Network.
3. If there is a second network operating system running in your network
environment (for example a Novell NetWare network), the “Entire Network”
window will also display available servers running under the second network
operating system. If you click on these servers, you may be asked to enter
your user name and password that applies to the other network operating
system. If you cannot find it, verify whether the other wireless computers are:
l Powered up and logged on to the network.
l Configured to operate with identical Microsoft Network settings
concerning:
n Networking Protocol.
n Wireless Network Name.
To enable the sharing of Internet access, you should set your IEEE802.11b WLAN
mode as “Infrastructure” and connect to the access point.
33
5.2 File Sharing
802.11b WLAN USB Adapter with 128MB Flash Disk allows the sharing of files
between computers that are logged onto the same wireless network. If you want to
share your folder “My Documents” with other computers of the wireless network,
please highlight the folder “My Documents” and drag it to Shared Documents
folder.
Sharing files in the IEEE802.11b wireless network will be like sharing files on a
wired LAN.
34
5.3 Using the Shared Folder
If you would like to access a shared folder stored in other stations of same network,
please follow the process below:
1.
Double-click the “My Network Places” icon, and then double-click the
computer where the shared folder is located.
2.
Double-click the folder you want to connect to.
3.
Now you may open the needed file(s).
Note! If a password is required, the Windows will prompt a password column to you.
Then you need to enter the password that had been assigned to this shared
folder.
35
6. Product Specifications
Item
Host Interface
Dimension
Key specifications
Ø
USB 1.1
Ø
Compatible with USB specification revision 1.1
Ø
A true "Plug & Play" connection supports hot swapping function.
Ø
Get power directly from USB port
Ø
No external power or batteries required
Ø
26.0(W) * 80.2(L) * 12.0(H) mm
Ø
26.0(W) * 87.5(L) * 14.1(H) mm
w/o cap
w/ cap
Weight
Approx. 25 g (w/ cap)
WLAN Frequency Range
Ø 2.412 ~ 2.462 GHz ,
Modulation technique
DSSS (Direct Sequence Spread Spectrum) with BPSK
(1Mbps), QPSK (2Mbps), and CCK (5.5Mbps) and 11Mbps
WLAN Channels support
US: 11 (1~11)
Power consumption
Ø Transmission mode: 205mA (typical)
Ø Receives mode: 190mA (typical)
Ø Idle mode: 173mA (typical)
Ø Power saving idle mode: 30mA (typical)
WLAN Operation range
Ø Indoor: 35~100 meter up @ 11 Mbps
Ø Outdoor: 300 meter up @ 11 Mbps
RF Receiver Sensitivity
@PER<0.08
Ø 11Mbps < -82dBm
Ø 5.5Mbps < -86dBm
Ø 2Mbps < -88dBm
Ø 1Mbps < -90dBm
Operation system
Ø No driver CD required for Windows 2000 / ME / XP
Ø Support Windows 98 / 98SE with CD driver
Wireless Security
Ø 64-bit, 128-bit WEP encryption
WLAN Transmission data
Ø 11Mbps, 5.5Mbps, 2Mbps, 1Mbps, auto-rate
rate
Operation temperature range
Ø 0oC ~ 55oC
Storage temperature range
Ø -20oC ~ 65oC
WLAN LED
Ø Blue indicator for WLAN
36
- Off: Power Off
- Blinking: Power On and search Access Point
- On : Connect with AP or AdHoc connection
Ø Green indicator for Storage
- Off : Power off / Standby / Power Saving
- Blinking : Read/Write process
Antenna
Ø Two Embedded Diversity Ceramic Antenna
Memory Size
Ø Capacity 128MB
Memory Type
Ø NAND Flash
37

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 38
Creator                         : .穨.Microsoft Word
Create Date                     : 2003:10:09 16:37:03
Title                           : .穨.fcc.PDF
Author                          : .穨.Daphne Liu
Producer                        : Acrobat PDFWriter 4.0 for Windows

EXIF Metadata provided by EXIF.tools