Wistron NeWeb UPAUS002 SATELLITE RADIO RECEIVER WITH FM TRANSMITTER User Manual XTR2 Manual

Wistron NeWeb Corporation SATELLITE RADIO RECEIVER WITH FM TRANSMITTER XTR2 Manual

USERS MANUAL

InstructionManualModelXTR2CKTo activate your Satellite Radio Receiver or for latest news and questions regardingSIRIUS®Satellite Radio service visit sirius.com or call 1-888-539-SIRIUS (7474).For accessory & product information visit us at www.getxact.com.
KEEPMOVING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses, and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interference byone or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.•Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the Manufacturer for compliance could void the user’sauthority to operate the equipmentNOTE! Use only the appropriate accessories or input devices with your receiver. Use only the 12v VehicleAdapter that is provided with the kit. It is important that you do not modify it in any way since this will resultin damaging your equipment and void the warranty.COPYRIGHT / TRADEMARKSNo part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or byany means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing ofthe publisher.is a registered trademark of SIRIUS®Satellite Radio. To activate your Satellite Radio Receiver or for latestnews and questions regarding SIRIUS®Satellite Radio service visit sirius.com or call 1-888-539-SIRIUS (7474).
SAFETY PRECAUTIONSWarningFollow these notifications to avoid any traffic accidents or personal injury:1. Installation must be performed according to this user guide.2. Do not install the device where it may obstruct your view through the windshield or of your vehicle’sindicator displays.3. Do not install the device where it may hinder the function of safety devices such as an airbag. Doing somay prevent the airbag from functioning properly in the event of an accident.4. The installation and usage suggestions contained in this user guide are subject to any restrictions orlimitations that may be imposed by applicable law. The purchaser should check applicable law for anyrestrictions or limitations before installing and/or operating this device.5. Failure to follow these safety instructions and warnings may result in a severe accident.DangerBe aware of the following precautions to prevent fire and avoid personal injury:1. To avoid short circuits, never put or leave any metallic objects (coins, tools, etc.) inside the device.2. If the device emits smoke or strange smells, turn the power off immediately and contact your dealer.3. Do not drop the device or subject it to strong shocks.4. If the LCD display becomes damaged or broken, do not touch the liquid crystal fluid. The fluid may bedangerous to your health or even fatal. If the liquid crystal fluid contacts your body or clothing, immediatelywash it off with soap and water.CautionDo not operate this device in a way that might divert your attention from driving safely. As a driver, you areresponsible for safely operating your vehicle in accordance with traffic safety laws at all times.
TABLE OF CONTENTSIntroduction Page 3Product Overview Page 3Package Contents Page 3Components Guide Page 4Xact Stream | jockey II SIRIUS®Radio Page 4Wireless Remote Control Page 5Getting Started Page 6Mounting Your Xact Stream | jockey II Satellite Radio at Home Page 6 Mounting Your Xact Stream | jockey II Satellite Radio in a Vehicle Page 6Activating Your SIRIUS®Subscription Page 7Basic Operations Page 10Tuning to Different Entertainment Categories Page 10Searching for Music Page 11Searching For Music By Channel Page 11Searching For Music By Artist/Composer Page 11Searching For Music By Song Page 12Direct Tuning Page 12Presetting Channels Page 13Searching for a Preset Channel/Artist/Song Page 14S-Seek Function Memo (Memory Search) Button Page 15Performing S-Seek Function Page 16Menu Options Settings Page 18Basic Setting Procedure Page 18SIRIUS®ID Page 18Display Settings Page 19FM Transmitter Page 20Channel Add/Skip Page 21Lock Options Page 21Audio Level Page 23Antenna Aiming Page 24SIRIUS® Satellite Map Page 24Memory Options Page 25Time Features Page 26Clock Page 27Format Page 27Time Zone Page 271
TABLE OF CONTENTSDaylight Saving Time Page 28Alarm Clock Page 28Time Page 28Program Alert Page 29Program Day/Time Page 29Channel Selection Page 30Auto Shutdown Page 30Sleep Mode Page 31Factory Default Page 31Display Messages Page 33Problem Solving Page 35Warranty Page 362
3INTRODUCTIONProduct OverviewThank you for purchasing this product! Your new plug and play XACT Stream | jockey II satellite radio isspecifically designed to mount in a vehicle or indoor/outdoor location.In the event that any item is missing or if you find any mismatch or damage, promptly contact your dealer.Your Xact Stream | jockey II Satellite Radio Receiver must be used in conjunction with any one of the followingXact Kits, such as the Universal kit, Home kit or Boom Box as required by you specific needs.•Xact Vehicle Kit: Model Number XS031•Xact Home Kit: Model Number XS032•Xact Sound Pad Portable Boom Box: Model Number XS034The easiest way to activate your Satellite Radio Receiver is to log on to sirius.com. You may also call 1-888-539-SIRIUS (7474). 3
4COMPONENTS GUIDE41235467891011121314XACT Stream | jockey II SIRIUS®Radio1. LCD Monitor (Main Display)2. CH (Channel) (Ascend/Descend Buttons)3. DISP (Display)4. CAT (Category) (Left/Right Directional Buttons)5. BAND (P-TUNE)6. IR for Remote Control7. Power Button8. MENU Options List9. SELECT (OK Button)10. MEMO (S-Seek)11. Numerical Keys12. Audio Jack13. DC Power Jack14. Antenna Jack
517891011121323456COMPONENTS GUIDE5Wireless Remote ControlThe wireless remote control packed with your plug and play XACT Stream | jockey II satellite radio mirrors theoperations of your plug and play XACT Stream | jockey II satellite radio receiver from a remote location.1. CH (Channel) (Ascend/Descend Buttons)2. MUTE3. BAND4. DISP (Display)5. P-TUNE6. MEMO7. Power Button8. SELECT (OK Button)9. CAT (Category) (Left/Right Directional Buttons)10. Volume Adjustment11. MENU Options List12. S-Seek13. Numerical Keys
6GETTING STARTEDMounting Your XACT Stream | jockey II Satellite Radio at HomeFind an appropriate location near your stereo receiver to install your plug and play satelliteradio receiver.Mounting Your XACT Stream | jockey II Satellite Radio in a VehicleFind an accessible location in your vehicle to install your plug and play satellite radio receiver;usually, this is the dashboard.Do not mount your device where it may obstruct your view through the windshield or your view of yourvehicle’s indicator displays.Do not mount your device where it may impede your access to the vehicle’s controls.Do not mount your device where it may hinder the function of safety devices, such as an airbag. Doingso may prevent the airbag from functioning accordingly in the event of an accident.Mount your satellite radio where it can be easily reached.The device must be directly in line-of-sight of the remote controller.NOTE! Do not modify or alter in any way the wires or connections especially to the 12v vehicle adapter. Doingso will prevent the protection provided in the circuitry from functioning properly and result in damagingyour receiver. This will void your warranty6
7Activating Your SIRIUS®SubscriptionBefore beginning to use your new device, you must first register to the SIRIUS®Satellite Radio service.There are two ways to activate the SIRIUS®Satellite Radio Service:1. Visit sirius.com and click activate, then follow the on-screen instructions.2. Call SIRIUS®at 1-866-845-7474. A representative will help you activate your SIRIUS®Satellite Radio Service. Note: Make sure to have your identification number accessible when calling SIRIUS®.Make Note of Your Identification NumberActivating your SIRIUS®Satellite Radio Service:1. Press MENU to enter the Menu Options settings.2. Press the or button select SIRIUS®ID and press the button to enter the sub menu.Your own device’s 12-digit SIRIUS®ID Number (ESN) will be displayed on the screen.7Enter ChannelUnsubscribedChannel0123456789Menu OptionsSirius IDDisplay SettingsCategory 12:00P FM TransmitterLock OptionsChannel Add/SkipSirius IDCategory 12:00P ESN 000492228912
NOTE! Use only the appropriate accessories or input devices with your receiver. Use only the 12v VehicleAdapter that is provided with the kit. It is important that you do not modify it in any way since this will resultin damaging your equipment and void the warranty.USING THE VEHICLE KIT8INSTALLATION...ROTATE RECEIVER UNIT BACKWARDSTO ENGAGE HOOKS AND TURN KNOB CLOCKWISE TO LOCK IN THE RECEIVER2.PLACE VEHICLE BASE HOOKS INTO LOCKING SLOT & PUSHTHUMB TAB IN...1.3.
9IF YOU HAVE PURCHASED ABoom Box KITROTATE RECEIVER AND CONNECTOR INTO BOOMBOX3.2.LATCH BOOMBOX LOCKS RECEIVER IN PLACE1. PUSH RECEIVER ONTOCONNECTORINSTALLATION
10BASIC OPERATIONS10After your SIRIUS®subscription is activated, the Normal (default) Operation screen will pop up.Tuning to Different Entertainment Categories1. Press the CAT button to scroll through music and entertainment categories.2. Press the CH button to search for channels.3. When the category you desire is highlighted (for example, “Jazz”), press the button to confirmthe setting. The channel will change and the display will revert to the Default Screen for the new channel. 4. To exit this mode without changing to a new channel, press and hold the button.003001 Channel Name001 Channel Name001 Channel Name001 Channel NameCategory 12:00PArtistSongChannel NameACategory001 Channel Name002 Channel Name003 Channel Name004 Channel Name005 Channel Name003001 Channel Name001 Channel Name001 Channel Name001 Channel NameCategory 12:00PArtistSongChannel NameA3-digit Channel numbersong titlesignal strength indicatorartist’s nameband or preset bank numberclockcategory nameChannel name
11Searching MusicYour satellite radio offers you three ways to seek and select music: by the channel name, by artist/composerand by song title.Searching For Music By Channel (Channel List)1. Press and hold the button while in Normal Operation mode. The Channel list screen will be displayed, numerically indicating all available channels, regardless of music category.2. Press the or button continuously to choose a preferred channel and press the button to confirmthe setting.3. Press and hold the button again to exit from the operation.Note: The selected channels will remain playing until you make a new change.Searching For Music By Artist/Composer (Artist/Composer List)1. Press and hold the button while in Normal Operation mode.2. You will first see the Channel list menu. Press the button again. The Artist/Composer list screen will be displayed, listing all currently playing artists, regardless of category. On channels that broadcast “composer”the Composer name will be displayed with the Artist name separated by a slash “/”.3. Press the or button continuously to choose a preferred artist and press the button to confirm the setting.4. Press and hold the button again to exit from the operation.11002 Channel Name003 Channel Name004 Channel Name005 Channel Name006 Channel Name001 Channel Name002 Artist/Composer003 Artist/Composer004 Artist/Composer005 Artist/Composer006 Artist/Composer001 Artist/Composer
Searching For Music By Song (Song Title List)1. Press and hold the button while in Normal Operation mode.2. Continue pressing the button twice. The Song Title list screen will be displayed, indicating all currently playing songs, regardless of category. The song title data is listed in ascending order.3. Press the or button continuously to choose a preferred song and press the button to confirmthe setting.4. Press and hold the button again to exit from the operation.Direct TuningYour XACT Stream | jockey II satellite radio enables you to access your selected channels directly.1. Press the button to activate the Direct Tuning mode.2. The corresponding window is displayed and asks you to enter the desired channel number (3 digits).3. Use the or left/right directional button until the desired digit is highlighted.4. Press the button to confirm the setting.1212002 Song Title003 Song Title004 Song Title005 Song Title006 Song Title001 Song Title0123456789# ___Enter Channel
Presetting Channels Your XACT Stream | jockey II satellite radio allows you to preset 18 channels. This design enables you todirectly select between 6 different bands of preset channels (identified as A, B, C, D, E and F). Each bandcontains 3 specific channels (indicated as A-1, A-2, A-3....F-1, F-2 and F-3).1. Press the or button to search for channels.2. Press the button to switch to your desired bands (A-F) according to your preference.3. Once the desired band is set, press and hold the 1,2 or 3 numerical button to select the specific channel. The list will then be recorded in memory.4. The selected preset number will remain lit on the display screen to demonstrate that it has been memorized.Note: If a channel is already recorded in the preset list, the new channel will overwrite the old one.1313001Category 12:00PArtistSongAChannel NamePreset Tuning Mode003001 Channel Name001 Channel Name001 Channel Name001 Channel NameCategory 12:00PArtistSongChannel NameA-1
14Searching for a Preset Channel/Artist/Song1. Press and hold the button while in Normal Operation mode. The screen will switch between the NormalOperation mode and the Preset Tuning mode.2. Press and hold the button until the Preset Channel list pops up.3. Press the button continuously until the preferred Preset Channel list is indicated.4. Each time you press the button, the Preset lists switches from “Channel Name” to ”Artist/Composer”to ”Song Title” cyclically.5. Press the button to confirm the setting.14A-2 Channel NameA-3 Channel NameB-1 Channel NameB-2 Channel NameB-3 Channel NameA-1 Channel NameA-2 Artist/ComposerA-3 Artist/ComposerB-1 Artist/ComposerB-2 Artist/ComposerB-3 Artist/ComposerA-1 Artist/ComposerA-2 Song TitleA-3 Song TitleB-1 Song TitleB-2 Song TitleB-3 Song TitleA-1 Song Title
1515S-Seek Function_MEMO (Memory Search) ButtonWhen in this mode, you can activate the memory search function. This will instruct your satellite radio tosearch the current incoming SIRIUS®signal and alert you when a song you have saved is being played.To Store the InformationUnder the Normal Operation mode or the Preset Tuning mode, press the button. The current programdata information is recorded in memory and the capacity status is displayed.What If You Have Already Recorded the Same Artist/Song?Your satellite radio automatically checks your recorded data information and compares it with the newlyselected program. If the newly selected program has already been recorded, to avoid duplication no entry willbe made.MemoryArtistSong1/10s001Category 12:00PArtistSongAChannel NameAlready Stored001Category 12:00PArtistSongAChannel NameStored001Category 12:00PArtistSongAChannel NameX Used/Y Empty
16What If the Program Storage is Full?If the Program Storage is full, a “Memory Full” message will pop up on the screen for a moment, followed by a“Replace” or “Cancel” message.1. Under Normal Operation mode or in Preset Tuning mode, press the button.2. Press the or button to select either “Replace” or “Cancel”.3. Press the button to confirm the setting.Replace: Do the following to select the program to be overwritten with the new Artist/Composeror Song Title.3a. Press the button, and the follow-up screen will be displayed.3b. Press the or button to scroll the the programs.3c. Press the button to replace with the new selection.Cancel: To avoid overwriting the stored selection, wait for the original screen to be displayed again.16ReplaceArtist/Song TitleArtist/Song TitleArtist/Song TitleArtist/Song TitleArtist/Song Title001Category 12:00PArtistSongAChannel NameMemory FullMemory FullReplaceCategory 12:00P Cancel
17Performing the S-Seek FunctionWhenever you turn your satellite radio on, it automatically searches the incoming signal to determine if amatch exits between the signal and the artist/composers or song titles that you have recorded in memory(except when S-Seek is set to Off).1. Press and hold the button. The recorded programs lists is displayed.2. Press and release the button while in S-Seek mode. 3. Two selectable options displayed on the screen.4. Select “Off” (to deactivate the programs searching) or “On” (to activate the program searching) by using the or button, then press button to confirm the setting.Deleting the Recorded Programs (Artist/Song)1. Press and hold the button. The recorded programs list is displayed.2. Press the or button to scroll through programs.3. Press the button to enter the sub-menu.4. Press the or button to select Delete.5. Press the button again to confirm the setting.17Memory RecallDeleteCategory 12:00P S-SeekS-SeekOnCategory 12:00P OffMemory RecallDeleteCategory 12:00P S-SeekDeleteYesCategory 12:00P No
18•SIRIUS®ID•Display Settings•FM Transmitter•Channel Add/Skip•Lock Options•Audio Level•Antenna Aiming•Memory Options•Time Features•Factory DefaultBASIC SETTING PROCEDURE1. Press the button. The Menu Options list is displayed on the screen.2. Press the or button to select a desired item3. Press the button, and the selected Option Setting pops up.4. Set the Option Setting to your preference according to the steps described below.5. To exit the Menu Options list, press and hold the button.SIRIUS®IDRefer to “Make a Note of Your Identification Number” for details.MENU OPTIONS SETTINGSThe following options are included on the Menu Options list:18Menu OptionsSirius IDDisplay SettingsCategory 12:00P FM TransmitterLock OptionsChannel Add/Skip
1919Display SettingsThe following adjustments can be made:•Brightness Control•Contrast ControlBrightness Control: A 10-segment horizontal bar graph is displayed. Move the or left/right directionalbutton to adjust the dimming control function accordingly. By pressing the or button or by taking noaction, you will return to the Menu Operations list.Contrast Control: A 10-segment horizontal bar graph is displayed. Move the or left/right directionalbutton to adjust the contrast control function accordingly. By pressing the or button or by taking noaction, you will return to the Menu Operations list.Menu OptionsSirius IDDisplay SettingsCategory 12:00P FM TransmitterLock OptionsChannel Add/SkipBrightness Control-+Contrast Control-+
20FM Transmitter The following adjustments can be made:•Frequency•FM On/OffFrequency: enables you to select any one of the pre-programmed FM channels. Press the or button toselect a desired channel, then press the button to confirm the setting. To exit this function, pressor button.FM On/Off: To activate/deactivate the FM transmitter.20Menu OptionsSirius IDDisplay SettingsCategory 12:00P FM TransmitterLock OptionsChannel Add/SkipFM TransmitterFrequencyCategory 12:00P FM On/OffFrequency88.1 MHz88.3 MHz88.5 MHz88.7 MHz88.9 MHzFM On/OffOnCategory 12:00P Off
21Channel Add/SkipYou can add or skip new/unwanted channels while tuning. When you enter this option, a channel list isdisplayed, and the current channel playing will be highlighted.Press the or button to navigate the list and highlight the channel you want to skip, then press thebutton to confirm the setting. A “Skip” message pops up next to the channel displayed. To activate the skippedchannel again, repeat the same steps and delete the “Skip” message. While adding the channel, the message“Skip” is removed from alongside the channel name, and the system will no longer skip this channel. To exitthis function, press button.Lock OptionsAccess to particular channels can be set with codes. When you intend to tune in to these particular channels,your receiver will require you to enter the access passwords.The following adjustments can be made:•Lock/Unlock•Edit Code21Menu OptionsSirius IDDisplay SettingsCategory 12:00P FM TransmitterLock OptionsChannel Add/Skip001 Channel Name002 Channel Name003 Channel Name004 Channel Name005 Channel Name006 Channel NameSkipSkipMenu OptionsSirius IDDisplay SettingsFM TransmitterLock OptionsChannel Add/Skip
22Lock/Unlock: When using Lock/Unlock for the first time, you are asked to type in the 4-digit code that is usedto Lock/Unlock the channel access. Press the “0” button four times to enter the default Access Code: 0000Thereafter, each time you enter this mode, a channel list will be displayed and the currently playing channelwill be highlighted. Press the or button to select a channel you want to lock, then press the button toconfirm the setting. The message “Lock” pops up next to the channel.Edit Code: You may change the access password (default code: 0000) to your preference.1. When you enter this mode, press the or left/right directional button to enter the current access code (4-digit default code: 0000 or your previously entered current code) A “New Code” message pops up.22Lock OptionsLock/UnlockCategory 12:00P Edit Code0123456789# ____Enter Code001 Channel Name002 Channel Name003 Channel Name004 Channel Name005 Channel Name006 Channel NameLockLockLock OptionsLock/UnlockCategory 12:00P Edit Code
232. Enter the numbers for your new access code by using the or left/right directional buttons.The confirmation screen will then be displayed.3. Enter the numbers for your new access code again by using or left/right directional buttons.Your new access password is now modified.Audio LevelYour plug and play satellite radio enables you to adjust audio level. When entering this option, a 10-segmenthorizontal bar graph is displayed on the screen with a (-) sign to the left and a (+) sign to the right. Press the or left/right directional button to adjust the suitable audio level, then press the button toconfirm the setting. You can also adjust the Audio level using the Vol+ or Vol- on the Remote Control.230123456789# ____New CodeConfirm CodeCode Saved0123456789Menu OptionsDisplay SettingsFM TransmitterChannel Add/SkipAudio LevelLock OptionsAudio Level-+
24Antenna Aiming Note: This adjustment setting is required only when you use your device at home. This way, you can assure optimum reception when mounting your SIRIUS®antenna.Upon entering this option, two 10-segment horizontal bar graphs are displayed with a (-) sign to the left and a(+) sign to the right. One is labeled “SAT” (satellite signal) and the other “TER” (terrestrial signal strength). Thecurrent setting is indicated on the bar graphs. Move the antenna in a location according to the SIRIUS®Satellite Map placement indicated below which provides the strongest signal indication. SIRIUS®Satellite MapDue to the paths of SIRIUS®satellites over the US, the best location for the antenna in your home depends onwhere you live. Use the map below as a general placement guideline. Area 1 : Place the antenna at an EAST -facing window.Area 2 : Place the antenna OUTSIDE,away from any overhead obstructions.Area 3 : Place the antenna at a NORTHWEST - or WEST - facing window.24Menu OptionsFM TransmitterChannel Add/SkipLock OptionsAntenna AimingAudio LevelAntenna Aiming TER SAT --++Area 4 : Place the antenna at a WEST -or NORTH - facing window.Area 5 : Place the antenna at a NORTH -facing window.Area 6 : Place the antenna at a NORTH -or EAST - facing window.
25Memory OptionsIn this mode, you can activate or deactivate the Memory Search Function (S-Seek). You can also remove allof the 18 memory locations.The following adjustments can be made:•Auto Memory Search•Clear AllAuto Memory Search: Press the or button to select either “On” or “Off”, then press the button toimplement the setting.On: To activate the S-Seek function.Off: To deactivate the S-Seek function.25Menu OptionsChannel Add/SkipLock OptionsAudio LevelMemory OptionsAntenna AimgingMemory OptionsAuto Memory SearchCategory 12:00P Clear AllAuto Memory SearchOnCategory 12:00P Off
26Clear All: Press the or button to select either “Yes” or “No”.The message “Are You Sure?” will pop up on the screen. Press the button to confirm the setting.Yes: will REMOVE all recorded channels.No: will CANCEL the deletion.Time FeaturesThe following adjustments can be made:•Clock•Alarm Clock•Program Alert•Auto Shutdown•Sleep Mode26Memory OptionsAuto Memory SearchCategory 12:00P Clear AllMenu OptionsLock OptionsAudio LevelAntenna AimgingTime FeaturesMemory OptionsTime FeaturesClockAlarm ClockProgram AlertAuto ShutdownSleep Mode
27Clock: This option enables you to set up the time to be displayed on the screen. Time is kept directly by theSIRIUS®satellite and is transmitted in GMT FORMAT.Format: Press the or button to select either the “12 Hour” (default) or the “24 Hour” mode, then press the button to confirm the setting.Time Zone: Press the or button to select the correct time zone for your region, then press the buttonto confirm the setting.(GMT -9:00) Alaska(GMT -8:00) Pacific(GMT -7:00) Mountain(GMT -6:00) Central(GMT -5:00) Eastern(GMT -4:00) Atlantic(GMT -3:30) Newfndlan27ClockFormatTime ZoneDaylight Saving TimeFormat12 HourCategory 12:00P 24 HourTime Zone(GMT -7:00) Mountain(GMT -6:00) Central(GMT -5:00) Eastern(GMT -4:00) Atlantic(GMT -3:00) Newfndlan
28Daylight Saving Time (DST): Activate this option if your area is subject to DST. Press the or button toselect “DST Observed” (default) or “DST Not Observed” setting. Then press the button to confirm thesetting.Alarm Clock: You can set your plug and play satellite radio to turn on at a selected time.Set Alarm: Press the or button to select either the “On” or “Off”(default) setting, then press the button to confirm the setting.Time: The default time is 12:00 pm. Press the or button to adjust the hour. Press the or button toadjust the minute. “AM” or “PM” is indicated automatically. Press the button to confirm the setting.28DST ObservedDST ObservedCategory 12:00P DST Not ObservedSet AlarmOnCategory 12:00P Off12:00 PMTime
29Program Alert: This option allows your XACT Stream | jockey II plug and play satellite radio to tune itself to apre-selected channel at a pre-selected time.Note: To use your programmed setting, make sure to set “Program Alert” to “Program Alert On”.The following settings can be made in this sub-menu screen:•Program Time/Day (default-12:00 PM - Monday)•Channel Selection (default-Currently Playing Channel)•Program Alert (default-Off)Program Time/Day: Press the or button to select either “Time” or “Day”. Then press the button toconfirm the setting.Time: Press the or button to adjust the minute and the or button to adjust the hours. Then pressthe button. AM or PM displays automatically as you advance the time.29Program AlertProgram Time/DayChannel SelectionProgram AlertProgram Time/DayTimeDay12:00 PMTime
30Day: Press the or to navigate the day: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Dailyor Sunday. Press the button to confirm the setting.Channel Selection: Press the or button to scroll through the channel list and select the channel of yourpreference. Press the button to confirm the setting.Program Alert: Press the or to select either the “On” or “Off” setting. Press the button to confirmthe setting.Auto Shutdown: This option will automatically turn your satellite radio off after an hour of inactivity. Anaudible tone will sound one minute before your device turns off. Press the or to select the “Enabled” or“Disabled” setting. Press the button to confirm the setting.30DayMondayTuesdayWednesdayThursdayFriday001 Channel Name002 Channel Name003 Channel Name004 Channel Name005 Channel Name006 Channel NameProgram AlertOnCategory 12:00P OffAuto ShutdownEnabledCategory 12:00P Disabled
31Sleep Mode: When entering this mode, you can program your XACT Stream | jockey II satellite radio toshutdown after a pre-selected period of time.The following adjustments can be made:Off (default)15 min.30 min.45 min.60 min.Press the or button to select the time. Press the button to confirm the setting. Your XACT Stream |jockey II satellite radio receiver will now turn off after the selected time has passed. If “Off” is selected, theSleep Mode will be canceled.Factory DefaultThe following items can be reset to their default mode. A message will pop up that reads “"Restore Settings?"before you can reset the item to its default mode.Press the or button to select either “Yes” (to reset) or “No” (to cancel the reset). Press the button toconfirm the setting.31Sleep ModeOff15 min30 min45 min60 min
32Items revert to their original factory settings as follows:All Presets revert to emptyDisplay Dimming to 70%Display Contrast to 50%FM Transmitter to “On” Audio Output Level to 70% Access to all skipped streams restoredMemory Search OnMemory locations will be erased12-Hour Clock FormatEastern time zoneDaylight savings time observedAlarm OffAlarm Time 12:00pmProgram Alert Time 12:00pmProgram Alert Day MondayProgram Alert Channel Number (current)Auto Shutdown OffSleep Mode OffDefault Font Size/Type “5x7”All preset channels and stored artists/composers and songs will also be removed, and all skipped channelswill become “un-skipped” (locked channels remain locked).32
33DISPLAY MESSAGESAcquiring SignalWhen the audio signal is lost, a pop-up window with the message “Acquiring Signal” is displayed until thesignal is recovered.Antenna Not DetectedWhen no antenna is detected and the signal is lost, a pop-up window with the message “Antenna NotDetected” is displayed until an antenna is detected and the signal is acquired.Updating ChannelsWhen a GCI (Global Control Information) update from the SIRIUS®broadcast system is detected, a pop-upwindow with the message “Updating Channels X% Completed” is displayed until the GCI update is complete.33001CategoryChannel NameAAcquring Signal001CategoryChannel NameAntennaNot DetectedAUpdating ChannelsX% Completed
34Subscription UpdatedWhen a subscription update (PSV) from the SIRIUS®broadcast system is detected, a pop-up window with themessage “Subscription Updated Anykey to Continue” is displayed for at least 3 seconds.MuteA single press of the “Mute” button will temporarily disable all analog and digital outputs from your device. Useyour remote control to implement this operation.34001Category 12:00PArtistSongAChannel NameSubscriptionUpdatedAnykey to Continue001001 Channel Name001 Channel Name001 Channel Name001 Channel NameCategory 12:00PArtistSongChannel NameA
35PROBLEM SOLVINGProblem Solving SectionFor your assistance, we have listed a few common problems below.The Satellite Receiver does not work. Please check the Power Cables. Make sure you have contacted SIRIUS®to activate your Satellite Radiosubscription 1-888-539-SIRIUS (7474).I have no sound from my Satellite Receiver. Check the audio cables and make sure they are plugged in correctly.Check the FM Transmitter Setting and make sure that your FM radio is set to the correct channel.The LCD displays Acquiring Signal.When the audio signal is lost, a pop-up window with the message “Acquiring Signal” is displayed until thesignal is recovered.The LCD Displays Antenna not Detected.When no antenna is detected and the signal is lost, a pop-up window with the message “Antenna NotDetected” is displayed until an antenna is detected and the signal is acquired.Reception is weak or the audio has static and is unclear.Check that the satellite antenna is connected and not faulty. Change the location of the Antenna making sureit is away from obstructions, see page 24.35
36WARRANTYWWaarrrraannttyy IInnffoorrmmaattiioonnXXAACCTT CCoommmmuunniiccaattiioonnOne-Year Limited WarrantyThis limited warranty sets forth all XACT Communication responsibilities regarding your product. There are noother expressed or implied warranties from XACT Communication.WWaarrrraannttyy SSeerrvviiccee PPrroovviiddeeddIf you purchased the product new from a retail vendor, XACT Communication warrants the equipment againstdefects in material and workmanship for a period of one (1) year from the original date of purchase. Thiswarranty is in lieu of all other express warranties. This warranty begins when you purchase the product andcontinues for one (1) year unless you sell or rent the unit, in which case the warranty stops.XACT Communication disclaims any implied warranty, including the warranty of merchantability and thewarranty of fitness for a particular purpose, as of the date of one year from your original purchase of the productXACT Communication assumes no responsibility for any special, incidental, or consequential damages.This warranty gives you specific legal rights and you may have other rights which vary from state to state.Some states do not allow the exclusion or limitations of special, incidental, or consequential damages orlimitations on how long a warranty lasts, so the above exclusion or limitation may not apply to you.WWaarrrraannttyy SSeerrvviiccee NNoott PPrroovviiddeeddThis warranty does not cover damage resulting from accident, misuse, abuse, improper installation oroperation, lack of reasonable care, unauthorized modification, or the affixing of any attachment not providedby XACT Communication with the equipment, and/or loss of parts. This warranty is voided in the event anyunauthorized person opens, alters, or repairs the product.All XACT Communication equipment being returned for repair must be suitably packaged.
37WARRANTYWWhhaatt TToo DDoo ffoorr WWaarrrraannttyy SSeerrvviicceeDuring the first thirty (30) days, a defective product is eligible for over-the-counter exchange at the retailer fromwhom it was purchased. After thirty (30) days, the defective product should be returned to the authorizedservice center. Please allow a minimum of 2-3 weeks for the return of your product. For the shippingaddress of the authorized service center, call one of the telephone numbers given below.Your product will be repaired or replaced if examination by the service center determines the product is defective.Products received damaged as a result of shipping will require you to file a claim with the carrier prior torepair. A product received with missing parts or with damage due to abuse, inadequate packing or some othernoncompliance with this limited warranty will be returned to you C.O.D., freight collect.NOTE: A product received which was not made by XACT Communication or which is not defective asdetermined by our test procedures will not be repaired and will be returned to you C.O.D., freight collect.TToo OObbttaaiinn WWaarrrraannttyy SSeerrvviiccee• Provide proof of the date of purchase within the package.• Prepay all shipping costs to the authorized service center.• Include a return shipping address within the package.Please retain your sales receipt, the carton, the packing materials, and the printed material. The originalcarton is the best shipping container for the Product should you have to return it.FFoorr yyoouurr rreeffeerreennccee::Model Number______________________________ ESN Number______________________________S/N Number_______________________________ Date of Purchase__________________________Name of Dealer_____________________________XACT Communication Customer Service Telephone Number:1-866-466-XACT (9228)OUTSIDE THE U.S.A. AND CANADA CALL: 1-212-481-7950Visit Us on the Web: www.getxact.com37
NOTESFCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTES
Call Toll Free 1-866-466-XACT (9228)or Visit our Website:www.getxact.comTo activate your Satellite Radio Receiver or for latest news andquestions regarding SIRIUS®Satellite Radio service visit sirius.com orcall 1-888-539-SIRIUS (7474).

Navigation menu