Wistron BT2 BT module User Manual

Wistron Corporation BT module Users Manual

Users Manual

CONFIDENTIALWistron CorporationPRODUCT SPECIFICATIONMODELBlueSlim2PRODUCT DESCRIPTIONBluetooth USB module compliant with BT2.1+EDR / 3.0+HS / 4.0TYPE6pin connectorDIMENSION6.5mm*30mm*2mmMAIN CHIPSETCSR8510A10Revision: V0.92
Page 2 / 10COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.REVISION HISTORYRevisionIssue DateChange Note0.90Aug.28, 2014Preliminary release0.91Sep.01, 2014Correct Chapter 3.4 pin assignment: pin5,6 are unused.0.92Mar.19, 2015Correct Q’TY/TRAY.
Page 3 / 10COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.TABLE OF CONTENTS1. INTRODUCTION .........................................................................................................................41.1 APPEARANCE .................................................................................................................41.2 BLOCK DIAGRAM..........................................................................................................42. FEATURES....................................................................................................................................43. SPECIFICATIONS ........................................................................................................................53.1 GENERAL SPECIFICATIONS.........................................................................................53.2 ELECTRICAL CHARACTERISTICS..............................................................................63.3 POWER MEASUREMENT..............................................................................................63.4 MODULE PIN ASSIGNMENT ........................................................................................73.5 Module Dimension.............................................................................................................73.6 ENVIRONMENTAL .........................................................................................................73.7 SOFTWARE ......................................................................................................................83.8 FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT ......................84. PACKAGE...................................................................................................................................10
Page 4 / 10COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.1. INTRODUCTIONBlueSlim2 is a USB Bluetooth module from official CSR reference design; it is fully compatible with theBluetooth v3.0 + High Speed and Bluetooth v4.0 standards, offering high-speed data transfer and Bluetooth lowenergy for PC products. Through products based on BlueSlim2, consumers can take full advantage of theBluetooth low energy ecosphere, connecting peripherals such as mice and keyboards and benefiting fromBluetooth low energy’s enormous power efficiency.BlueSlim2 utilizes USB, the dominant standard interface for most PC platforms, so it can be easily connected toa vast range of PC devices. The applications can be Laptops, Tablet, All-in-one, digital TV, set-top box, andversatility of consumer products.1.1 APPEARANCETop viewBottom view1.2 BLOCK DIAGRAM2. FEATURES6 pin connector.HCI mode operation with USB2.0 full speed (12Mbps).Fully qualified Bluetooth® spec v2.1/2.1+EDR/3.0/3.0+HS/4.0,Dual-mode BluetoothSupport for Bluetooth basic rate / EDR and low energy connection.
Page 5 / 10COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.Powered by +3.3V.Onboard Printed antenna.Class1, Class2, Class3 supported.Measured Max. TX output power up to 6dBm, max. distance range 30 meters (Class1).ROHS compliance.3. SPECIFICATIONS3.1 GENERAL SPECIFICATIONSModel NameBlueSlim2Main ChipsetBlueCore® CSR8510A10EEPROM32KbitStandardBluetooth spec v2.1, v2.1+EDR, v3.0, v3.0+HS, v4.0,Bus InterfaceUSB2.0 full speedConnector6 pins,pitch=0.6ACES (50376‐00601‐001) 1*6 P=0.6mm R/A SMD HF ,or equivalent.AntennaPrinted antennaShielding caseYesDimensions (L*W*H)6.5mm*30mm*2mmSurface mountsingle side Surface MountOperating voltage3.3 V ±10%Integrated linear regulators:USB: USB bus supply to 3.3V
Page 6 / 10COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.High-voltage: 2.3V to 4.8V input to 1.85VLow-voltage: VDD_DIG, VDD_RADIO andVDD_AUX regulatorsPower-on-reset cell detects low supply voltageArbitrary sequencing of power supplies is permitted3.2 ELECTRICAL CHARACTERISTICSFrequency Range2.402GHz to 2.480GHz, ISM bandRadio TechnologyFHSS (Frequency Hopping Speed Spectrum)Basic Data Rate1Mbps (GFSK)Enhanced Data Rate2Mbps (DQPSK); 3Mbps (8-DPSK)Channel Number79 Channels, 1MHz bandwidth3.3 POWER MEASUREMENTSupply voltage+3,3V (Min. 3.0V; Max. 3.6V)Continuous TX supply current57mAContinuous RX supply current46mABluetooth Power ON (RF off)14mA
Page 7 / 10COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.3.4 MODULE PIN ASSIGNMENTPIN1VCC 3.3V2GND3USB D+4USB D-5Reserved; unused.6Reserved; unused.3.5 Module DimensionBlueSlim2LengthWidthHeightPCB Dimension6.5mm (±1.5%)30mm (±1.5%)0.8mm (±1.5%)ModuleDimension6.5mm (±1.5%)30mm (±1.5%)Max. height ofShielding CaseTOP1.15mmBOTTOM0Total height = 2mm (Max. 2mm)3.6 ENVIRONMENTALOperatingOperating Temperature: 0°C to +70 °CRelative Humidity: 5-90% (non-condensing)StorageTemperature: -20°C to +85°C (non-operating)Relative Humidity: 5-95% (non-condensing)
Page 8 / 10COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.3.7 SOFTWAREOS supported: Linux / Android/ WindowsBT Stack: Please check the 3rd-party BT software utility or what stack which your OS has supported.3.8 FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT15.21You are cautioned that changes or modifications not expressly approved by the part responsible for compliance couldvoid the user’s authority to operate the equipment.15.105(b)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 ofthe FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to tryto correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:1) this device may not cause harmful interference and2) this device must accept any interference received, including interference that may cause undesired operation of thedevice.
Page 9 / 10COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.FCC RF Radiation Exposure Statement:1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. Thisequipment should be installed and operated with a minimum distance of 20 centimeters between the radiator andyour body.End Product LabelingThis transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may bemaintained between the antenna and users.The final end product must be labeled in a visible area with the following: “Contains FCC ID: PU5BT2”Manual Information To the End UserThe OEM integrator has to be aware not to provide information to the end user regarding how to install or remove thisRF module in the user’s manual of the end product which integrates this module.The end user manual shall include all required regulatory information/warming as shown in this manual.The end product may also subject to fulfill FCC part 15B (un-intentional emission) requirement while module is beinginstalled.
Page 10 / 10COPYRIGHT © 2014 Wistron Corporation, ALL RIGHTS RESERVED.4. PACKAGETRAY SPECIFICATIONDimension: 331*137*97mmCARTON SPECIFICATIONDimension: 350*143*77mmQ’TY/TRAY800pcs/16+1 tray ,TOTAL: 800pcs /Carton

Navigation menu