Wistron TP00045A1WD Digitizer I/O device User Manual 6349613

Wistron Corporation Digitizer I/O device 6349613

Contents

User Manual 03

Download: Wistron TP00045A1WD Digitizer I/O device User Manual  6349613
Mirror Download [FCC.gov]Wistron TP00045A1WD Digitizer I/O device User Manual  6349613
Document ID1863201
Application ID+lSfibH4y8h+xD18pjWTmQ==
Document DescriptionUser Manual 03
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize8.18kB (102217 bits)
Date Submitted2012-12-19 00:00:00
Date Available2013-06-17 00:00:00
Creation Date2012-12-14 15:10:42
Producing SoftwareAcrobat Distiller 10.1.3 (Windows)
Document Lastmod2012-12-14 15:10:42
Document TitleMicrosoft Word - ~6349613.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: user

Installation and Operation Guide of Digitizer
(Model:SU6E-11H05AU-01A)
The Digitizer unit is developed for use in the specific host computer, Lenovo Tablet PC
(Model: TP00045A1).
The device is furnished inside the host computer in a factory, so end users do not
need to install it.
And it will work automatically without any customization or specific professional
operation. Refer to separate specification for more details.
The final end product (host computer) must be labeled in a viewable area with the
following wording or any other similar one that expresses the same meaning.
Contains Modular Transmitter:
FCC ID: PU5-TP00045A1WD
IC: 4182A-TP00045A1WD
And OEM integrator is subjected to the following conditions hereafter.
L'unité du Digitaliseur est développée pour usage dans le serveur spécifique,
Comprimé Lenovo PC (Modèle: TP00045A1).
L'appareil est fourni à l'intérieur du serveur dans une usine, donc les utilisateurs finals
ne doivent pas l'installer.
Et cela marchera automatiquement sans tout customization ou opération
professionnelle spécifique. Reportez-vous pour séparer des Utilisateurs Guidez et
spécification pour plus de détails.
Le dernier produit de fin (serveur) doit être étiqueté dans une région du viewable avec
le libellé suivant ou tout autre semblable qui exprime la même signification.
Contient le transmetteur modulaire:
CARTE D'IDENTITÉ FCC ID: PU5-TP00045A1WD
IC: 4182A-TP00045A1WD
Et l'intégrateur de l'OEM est soumis ci-après aux conditions suivantes.
Canada - Industrie Canada (IC)
Low power license-exempt radiocommunication devices
(RSS-210)
Operation is subject to the following two conditions:
• This device may not cause interference.
• This device must accept any interference, including interference that may
cause undesired operation of the device.
Appareils de radio-communication basse tension sans licence
d'utilisation (CNR-210)
Le fonctionnement de ce type d'appareil est soumis aux deux conditions
1/4
suivantes :
• Cet appareil ne doit pas perturber les communications radio.
• Cet appareil doit supporter toute perturbation, y compris les perturbations qui
pourraient provoquer son dysfonctionnement.
Exposure of humans to RF fields (RSS-102)
The device is able to sense the Digitizer Pen shipped associated with the OEM
computer. The device does not emit RF field in excess of Health Canada limits for the
general population; consult Safety Code 6, obtainable from Health Canada's Web site
at http://www.hc-sc.gc.ca/
The RF field of the device is far below the RSS-102 radio frequency exposure limit,
because the limit is equal to the Class B digital apparatus regarding Canadian
ICES-003.
Therefore, the device is not subjected to any RF exposure requirement. And it may be
co-located or operating in conjunction with any other antenna or transmitter if the OEM
integrator confirms the final end product (host computer) conforms to ICES-003 Class
B in system level.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
Exposition d'êtres humains aux champs RF (CNR-102)
L'appareil est capable de sentir le Stylo du Digitaliseur transporté associé avec
l'ordinateur de l'OEM. L'appareil n'émet pas champ RF en excès de Santé que le
Canada limite pour la population générale; consultez la Sécurité Code 6, procurable de
Santé le site Web de Canada à http://www.hc-sc.gc.ca/
Le champ RF de l'appareil est lointain au-dessous du CNR-102 envoie par radio la
limite de l'exposition de la fréquence, parce que la limite est égale à la Classe B
appareil numérique concernant GLACES canadiennes -003.
Par conséquent, l'appareil n'est pas soumis à toute exigence d'exposition RF. Et il peut
être co-localisé ou opérer conjointement avec toute autre antenne ou transmetteur si
l'intégrateur de l'OEM confirme le dernier produit de fin (serveur) se conforme à
NMB-003 Classe B dans le niveau du système.
Vous êtes avertis que pas les changements ou modifications ont approuvé
formellement par le parti responsable pour acquiescement pourrait annuler votre
autorité pour opérer le matériel.
Industry Canada Class B emission compliance statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
2/4
USA - Federal Communications Commission (FCC)
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
Electronic emissions notices
The following information refers to Model:SU6E-11H05AU-01A.
Federal Communications Commission (FCC) Declaration of Conformity
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult an authorized dealer or service representative for help.
Wistron is not responsible for any radio or television interference caused by
using other than specified or recommended cables and connectors or by
unauthorized changes or modifications to this equipment. Unauthorized changes
or modifications could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Responsible Party:
Wistron Corporation
21F., No.88, Sec. 1, Hsintai 5th Rd., Hsichih, New Taipei City,
Taiwan (R.O.C.)
Phone Number: 02 6616-9999
3/4
Exposure to Radio Frequency Radiation
The device is able to sense the Digitizer Pen shipped associated with the OEM
computer. The device emits extra low power radio frequency and complies with the
FCC Part 15 Subpart C.
The radiated output power of the device is far below the FCC radio frequency
exposure limit, because the limit is equal to the Class B digital device regarding FCC
Part 15 Subpart B.
Therefore, the device is not subjected to any RF exposure requirement. And it may be
co-located or operating in conjunction with any other antenna or transmitter if the OEM
integrator confirms the final end product (host computer) conforms to FCC Part 15
Subpart B in system level.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
4/4

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : user
Create Date                     : 2012:12:14 15:10:42+08:00
Modify Date                     : 2012:12:14 15:10:42+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.1.3 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - ~6349613.doc
Creator                         : user
Document ID                     : uuid:bf8c7b2e-3359-461b-897b-83b34b3505e9
Instance ID                     : uuid:a63b6437-13b9-4a4e-93b8-259b5048f90c
Page Count                      : 4
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PU5-TP00045A1WD

Navigation menu