Wistron W701 Notebook Computer with digitizer User Manual Front page UY610 03 0060 10

Wistron Corporation Notebook Computer with digitizer Front page UY610 03 0060 10

User's Manual

Lenovo(Japan), Ltd., Date: November 06, 2009 Document Number: UY610-03-0060-10 User’s Manual The attachment hereafter is the user’s manual of the specific Lenovo PC device (ThinkPad W701 Series) that indicates the regulatory notice concerning the FCC Part 2, 15, and IC RSS-102e & RSS-210. In addition, some electronic information regarding digitizer feature, which is installed in the PC device and displayed on the LCD screen, is included in this exhibit.
ThinkPad Regulatory NoticeAbout this manualThis manual contains regulatory information for the following ThinkPad®products.vThinkPad W701 and W701dsRead first — regulatory informationRead this document before using your computer. This computer complieswith the radio frequency and safety standards of any country or region inwhich it has been approved for wireless use. Install and use your computeraccording to the following instructions.The latest Regulatory Notice has been uploaded on the Web site. To refer to it,go to http://www.lenovo.com/think/support, click Troubleshooting, andthen click User’s guides and manuals.Veuillez lire le présent document avant d’utiliser votre ordinateur. Cetordinateur est conforme aux normes de fréquence radio et de sécurité de tousles pays ou régions dans lesquels son utilisation sans fil a été homologuée.Installez et utilisez l’ordinateur en respectant les instructions qui suivent.La version la plus récente de la Notice relative à la réglementation a étéchargée sur le site Web. Pour la consulter, accédez à http://www.lenovo.com/think/support, cliquez sur Troubleshooting, puis sur User’s guides andmanuals.© Copyright Lenovo 2009 1
USA — Federal Communications Commission (FCC)I. Approved wireless devicesThis section presents the FCC ID and model number of each wireless device.i) User installable wireless LAN/WiMAX adaptervFCC ID: TX2-RTL8191SE-L (Model: RTL8191SE)vFCC ID: PD9633ANHU (Model: 633ANHMW)vFCC ID: PD9622ANXHU (Model: 622ANXHMW)Notes:vThe PCI Express Mini Card (Model: 622ANXHMW) incorporates twofunctions: LAN and WiMAX. These functions operate exclusively, and donot transmit radio frequencies simultaneously.vPCI Express Mini Cards for a wireless LAN marketed in the USA andCanada do not support or function in the extended channels (12ch, 13ch).ii) Preinstalled integrated Bluetooth devicevFCC ID: QDS-BRCM1046 (Model: BCM92070MD_LENO)II. User installable wireless LAN/WiMAX adapteri) Use of the wireless LAN/WiMAX adapterIf no integrated PCI Express Mini Card has been preinstalled in yourcomputer, you can install one, provided by Lenovo®as an option. Plug thewireless option adapter into the PCI Express Mini Card slot. For theinstallation procedure, see “Installing and replacing the PCI Express MiniCard for wireless LAN/WiMAX connection” in Access Help.Attention: The computer contains an authentication mechanism. If youinstall an unauthorized PCI Express Mini Card that is not approved for use inyour computer, the computer will not start, but only displays an errormessage and emits audible beeps.ii) FCC ID locationThere is no FCC ID for the PCI Express Mini Card shown on the enclosure ofyour computer. Instead you will find an indicator pointing to the location ofthe FCC ID on the bottom of your computer. For the location of the FCC IDindicator, see “Location of the FCC ID and IC Certification number label” inAccess Help. The FCC ID is affixed on the approved adapter installed in thePCI Express Mini Card slot, and the FCC ID is visible prior to installation. Forthe location of the slot, see “PCI Express Mini Card slot for wirelessLAN/WiMAX” in Access Help.2
iii) FCC RF Exposure complianceThe radiated output power of the PCI Express Mini Card authorized to usefor your computer is far below the FCC radio frequency exposure limits.Nevertheless, it shall be used in such a manner that the potential for humancontact during normal operation is minimized as follows:CAUTION:To comply with FCC RF exposure compliance requirements, a separationdistance of at least 20 cm (8 inches) must be maintained between theantennas connected to the PCI Express Mini Cards and all persons. If thedistance may not be maintained while the computer is closed, you mustselect sleep (standby) as the power mode when closing the display.The transmission antennas for the PCI Express Mini Card are located in theLCD cover. See “Location of the UltraConnect™wireless antennas” in AccessHelp.iv) Radio Frequency interference requirementsEach device has been tested and found to comply with the limits for a Class Bdigital device pursuant to FCC Part 15 Subpart B. Refer to “Electronicemission notices” on page 9.When you use a wireless LAN/WiMAX adapter in the 802.11 a/ntransmission mode:vEach device is restricted to indoor use due to its operation in the 5150 to5250 MHz frequency range. FCC requires these products to be used indoorsfor the frequency range 5150 to 5250 MHz to reduce the potential forharmful interference to co-channel Mobile Satellite systems.vHigh power radar are allocated as primary users of the 5250 to 5350 MHzand 5650 to 5850 MHz bands. These radar stations can cause interferencewith and/or damage this device.III. Preinstalled integrated Bluetooth devicei) Use of the Bluetooth deviceThe Bluetooth device is preinstalled by Lenovo, and is not removable by you.If the device requires replacement during warranty it must be serviced by aLenovo authorized servicer.ii) FCC ID locationIf your computer uses a Bluetooth device, the FCC ID for the Bluetooth deviceis affixed on the label at the bottom of your computer.ThinkPad Regulatory Notice 3
iii) FCC RF safety requirementThe radiated output power of the Bluetooth device is far below the FCC radiofrequency exposure limits. Therefore, a 20 cm of separation between theBluetooth antenna and human body is not required.The Bluetooth device is located under the palm rest. See “About yourcomputer” in Access Help.iv) Radio Frequency interference requirementsThe Bluetooth device has been tested and found to comply with the limits forboth a Class B digital device regarding FCC Part 15 Subpart B and anintentional radiator regarding FCC Part 15 Subpart C; then it underwent thecertification processes for both rules. Thus the FCC ID for the Bluetooth deviceincludes both certifications of Part 15 Subpart B and C.IV. Digitizer functionThe ThinkPad W701 and W701ds computers employ a digitizer functionwhich is able to sense the Digitizer Pen shipped associated with yourcomputer. The digitizer emits extra low power radio frequency and complieswith the FCC Part 15, Subpart C. The FCC ID: PU5-W701 is indicated on thelabel at the bottom of your computer.V. Simultaneous use of RF transmittersYour computer is approved for simultaneous use of one of the approvedwireless LAN/WiMAX adapters and the approved Bluetooth device. For a listof those transmitters, refer to “I. Approved wireless devices” on page 2.Make sure of the following conditions when you use any other external RFoption device:1. When you use any other RF option device, you are requested to confirmthat the device conforms to the RF Safety requirement and is approved touse for your computer.2. You must follow the RF Safety instructions of the RF option device thatare included in the user manual of the RF option device.3. If the RF option device is prohibited to use in conjunction with anothertransmitters, you must turn off all other wireless features in yourcomputer.4
Canada — Industry Canada (IC)IC Certification numberI. Approved wireless devicesThis section presents the IC Certification and model number of each wirelessdevice.i) User installable wireless LAN adaptervIC: 6317A-RTL8191SE (Model: RTL8191SE)vIC: 1000M-633ANHU (Model: 633ANHMW)Note: PCI Express Mini Cards for a wireless LAN marketed in the USA andCanada do not support or function in the extended channels (12ch, 13ch).ii) Preinstalled integrated Bluetooth devicevIC: 4324A-BRCM1046 (Model: BCM92070MD_LENO)II. User installable wireless LAN adapterThere is no certification number of Industry Canada for the PCI Express MiniCard shown on the enclosure of your computer. Instead you will find anindicator pointing to the location of the IC Certification number on the bottomof your computer. For the location of the IC Certification number indicator,see “Location of the FCC ID and IC Certification number label” in Access Help.The IC certification number is affixed on the approved adapter installed in thePCI Express Mini Card slot, and the IC Certification number is visible prior toinstallation. For the location of the slot, see “PCI Express Mini Card slot forwireless LAN/WiMAX” in Access Help.Attention: The computer contains an authentication mechanism. You caninstall or remove each wireless adapter by yourself. If you install anunauthorized wireless adapter that is not approved for use in the computer,the computer will not start, but only displays an error message and emitsaudible beeps.III. Preinstalled integrated Bluetooth deviceIf your computer uses a Bluetooth device, the IC Certification number for theBluetooth device is affixed on the label at the bottom of your computer. TheBluetooth device is preinstalled by Lenovo, and is not removable by you. If thedevice requires replacement during warranty it must be serviced by a Lenovoauthorized servicer.IV. WiMAX featuresThe use of the WiMAX features is not permitted in Canada. Do not use thefeatures. To do so would be a violation of Industry Canada regulations.ThinkPad Regulatory Notice 5
V. Low power license-exempt radiocommunication devices (RSS-210)Operation is subject to the following two conditions:1. This device may not cause interference, and2. this device must accept any interference, including interference that maycause undesired operation of the device.The transmitter devices have been designed to operate with the antennasintegrated in the computer, and having a maximum gain of within 3 dBi.The maximum antenna gain permitted for devices in the 5250-5350 MHz,5470-5725 MHz, and 5725-5825 MHz bands complies with the e.i.r.p. limit insection A9.2 of RSS-210.When you use a wireless LAN adapter in the 802.11 a/n transmission mode:vThe devices for the band 5150–5250 MHz are only for indoor usage toreduce potential for harmful interference to co-channel Mobile Satellitesystems.vHigh power radars are allocated as primary users (meaning they havepriority) of 5250–5350 MHz and 5650–5850 MHz and these radars couldcause interference and/or damage to LELAN (Licence-Exempt Local AreaNetwork) devices.VI. Exposure of humans to RF fields (RSS-102)The computers employ low gain integral antennas that do not emit RF field inexcess of Health Canada limits for the general population; consult Safety Code6, obtainable from Health Canada’s Web site at http://www.hc-sc.gc.ca/The radiated energy from the antennas connected to the wireless adaptersconforms to the IC limit of the RF exposure requirement regarding ICRSS-102, Issue 2 clause 4.2.VII. Digitizer functionThe ThinkPad W701 and W701ds computers employ a digitizer functionwhich is able to sense the Digitizer Pen shipped associated with yourcomputer. The digitizer emits extra low power radio frequency and complieswith the standard (RSS-210). The IC certification number IC: 4182A-W701 isindicated on the label at the bottom of your computer.6
Numéro d’homologation ICI. Périphériques sans fil homologuésCette section présente le numéro d’homologation IC et le numéro de modèlede chaque périphérique sans fil.i) Module sans fil installable par l’utilisateurvIC: 6317A-RTL8191SE (Model: RTL8191SE)vIC: 1000M-633ANHU (Model: 633ANHMW)Remarque: Les cartes de réseau local sans fil Express mini-PCIcommercialisées aux Etats-Unis et au Canada ne prennent pas en charge lescanaux étendus (12ch, 13ch) et ne fonctionnent donc pas sur de tels canaux.ii) Émetteur Bluetooth intégré préinstallévIC: 4324A-BRCM1046 (Model: BCM92070MD_LENO)II. Module sans fil installable par l’utilisateurLe boîtier de votre ordinateur ne comporte pas de numéro d’homologation IC(Industry Canada) pour la carte mini-PCI Express; mais sous votre ordinateur,vous trouverez un indicateur pointant vers l’emplacement du numérod’homologation IC. Pour connaître l’emplacement du numéro d’homologationIC, consultez la section correspondante dans Access Help. Le numérod’homologation IC figure sur la carte homologuée installée dans le logementpour carte mini-PCI Express et est visible avant l’installation. Pour savoir oùse trouve cet emplacement, consultez la section ″Logement pour cartesmini-PCI Express pour réseau local/WiMAX″dans Access Help.Attention: L’ordinateur contient un mécanisme d’authentification. Vouspouvez installer ou désinstaller tout dispositif sans fil. Si vous installez unecarte sans fil qui n’est pas homologuée dans votre ordinateur, l’ordinateur nedémarrera pas mais affichera un message d’erreur et générera des bipssonores.III. Émetteur Bluetooth intégré préinstalléSi votre ordinateur utilise un émetteur Bluetooth, le numéro d’homologation ICde cet émetteur Bluetooth figure sur une étiquette collée sous l’ordinateur.L’émetteur Bluetooth est préinstallé par Lenovo et ne peut pas être retiré parl’utilisateur. S’il doit être remplacé pendant la période de garantie, l’opérationdoit être effectuée par un prestataire de services agréé par Lenovo.IV. Fonctions WiMAXL’utilisation de fonctions WiMAX n’est pas autorisée au Canada. Veuillez nepas utiliser cette fonction car ce serait une infraction aux lois d’IndustrieCanada.ThinkPad Regulatory Notice 7
V. Remarque relative aux appareils de communication radio de faiblepuissance sans licence (CNR-210)Le fonctionnement de ce type d’appareil est soumis aux deux conditionssuivantes:1. Cet appareil ne doit pas perturber les communications radio, et2. cet appareil doit supporter toute perturbation, y compris les perturbationsqui pourraient provoquer son dysfonctionnement.Les périphériques d’émission sont conçus pour fonctionner avec des antennesintégrées à l’ordinateur et ayant un gain maximal de moins de 3 dBi.Le gain d’antenne maximal pour les périphériques dans les bandes defréquence 5250-5350 MHz, 5470-5725 MHz, et 5725-5825 MHz est conforme àla limite p.i.r.e énoncée dans la section A9.2 de la CNR-210.Lorsque vous utilisez la carte pour réseau local sans fil en mode detransmission 802.11 a/n:vTout appareil destiné à la bande 5150-5250 MHz devra être exclusivementutilisé en intérieur afin de réduire les risques de perturbationsélectromagnétiques gênantes sur les systèmes de satellite mobile dans unmême canal.vLes radars à forte puissance sont désignés comme les utilisateursprincipaux (c’est-à-dire qu’ils sont prioritaires) des bandes 5250-5350 MHzet 5650-5850 MHz. Ils peuvent provoquer des perturbationsélectromagnétiques sur les appareils de type LELAN (réseau decommunication local sans licence) ou les endommager.VI. Exposition des êtres humains aux champs radioélectriques (RF)(CNR-102)L’ordinateur utilise des antennes intégrales à faible gain qui n’émettent pas unchamp électromagnétique supérieur aux normes imposées par le Ministére dela santé canadien pour la population. Consultez le Safety Code 6 sur le siteWeb du Ministére de la santé canadien à l’adresse http://www.hc-sc.gc.ca/L’énergie émise par les antennes reliées aux adaptateurs sans fil respecte lalimite d’exposition aux radiofréquences telle que définie par Industrie Canadadans la clause 4.2 du document CNR-102.VII. Fonction de numérisationLes ordinateurs ThinkPad W701 and W701ds utilisent une fonction denumérisation capable de détecter le stylo numériseur de la graphique qui estassocié à votre ordinateur. Le numériseur émet une fréquence radioextrêmement basse et il est conforme à la norme CNR-210. Le numéro decertification IC: 4182A-W701 figure sur l’étiquette apposée au bas de votreordinateur.8
Electronic emission noticesFederal Communications Commission (FCC) Declaration of ConformityvModel: RTL8191SENote: The wireless LAN/WiMAX adapters (Models: 633ANHMW and622ANXHMW) and the Bluetooth device (Model: BCM92070MD_LENO)underwent certification process for the FCC Part 15 Subpart B complianceunder each respective FCC ID number.This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one ormore of the following measures:vReorient or relocate the receiving antenna.vIncrease the separation between the equipment and receiver.vConnect the equipment into an outlet on a circuit different from that towhich the receiver is connected.vConsult an authorized dealer or service representative for help.Lenovo is not responsible for any radio or television interference caused byunauthorized changes or modifications to this equipment. Unauthorizedchanges or modifications could void the user’s authority to operate theequipment.This device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) this device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.ThinkPad Regulatory Notice 9
Responsible Party:Lenovo (United States) Incorporated1009 Think Place-Building OneMorrisville, NC 27560Telephone: 1-919-294-5900Tested To ComplyWith FCC StandardsFOR HOME OR OFFICE USEIndustry Canada Class B Emission Compliance StatementThis Class B digital apparatus complies with Canadian ICES-003.Avis de conformité à la réglementation d’Industrie CanadaCet appareil numérique de la classe B est conforme à la norme NMB-003 duCanada.Telecommunication noticesFederal Communications Commission (FCC) and Telephone CompanyRequirements (Part 68 of the FCC Rules)1. The Telephone Consumer Protection Act of 1991 makes it unlawful forany person to use a computer or other electronic device to send anymessage via a telephone fax machine unless such message clearlycontains in a margin at the top or bottom of each transmitted page or onthe first page of the transmission, the date and time it is sent, and anidentification of the business or other entity, or other individual sendingthe message and the telephone number of the sending machine or suchbusiness, other entity, or individual.In order to program this information into your computer, you should besure to follow the installation instructions for your fax software package.2. This equipment complies with Part 68 of the FCC rules and therequirements adopted by the ACTA. On this equipment is a label thatcontains, among other information, a product identifier in the formatUS:AAAEQ##TXXXX. If requested, this number must be provided to thetelephone company.3. The REN is used to determine the number of devices that may beconnected to a telephone line. Excessive RENs on a telephone line mayresult in the devices not ringing in response to an incoming call. In mostbut not all areas, the sum of RENs should not exceed five (5.0). To becertain of the number of devices that may be connected to a line, asdetermined by the total RENs, contact the local telephone company. The10
REN for this product is part of the product identifier that has the formatUS:AAAEQ##TXXXX. The digits represented by ## are the REN withouta decimal point (e.g., 03 is a REN of 0.3).4. If the built-in modem causes harm to the telephone network, thetelephone company may discontinue your service temporarily. If possible,they will notify you in advance. But, if advance notice isn’t practical, youwill be notified as soon as possible. You will be advised of your right tofile a complaint with the FCC.5. Your telephone company may make changes in its facilities, equipment,operations, or procedures that could affect the proper operation of yourequipment. If they do, you will be given advance notice so as to give youan opportunity to maintain uninterrupted service.6. No customer repairs are possible to the modem. If you experience troublewith this built-in modem, contact your Lenovo Authorized Seller, or theCustomer Support Center. For the most current phone numbers, go tohttp://www.lenovo.com/think/support and click Support phone list.The telephone company may ask you to disconnect this equipment fromthe network until the problem has been corrected, or until you are surethe equipment is not malfunctioning.7. The modem may not be used on coin service provided by the telephonecompany. Connection to party lines is subject to state tariffs. Contact yourstate public utility commission or corporation commission forinformation.8. When ordering network interface (NI) service from the Local ExchangeCarrier, specify service arrangement USOC RJ11C.9. A plug and jack used to connect this equipment to the premises wiringand telephone network must comply with the applicable FCC Part 68rules and requirements adopted by the ACTA. A compliant telephonecord and modular plug is provided with this product. It is designed to beconnected to a compatible modular jack that is also compliant. Seeinstallation instructions for details.10. If your home has specially wired alarm equipment connected to thetelephone line, ensure the installation of this Data/Fax Modem does notdisable your alarm equipment. If you have questions about what willdisable alarm equipment, consult your telephone company or a qualifiedinstaller.Industry Canada requirementsNotice: This equipment meets the applicable Industry Canada TerminalEquipment Technical Specifications. This is confirmed by the registrationnumber. The abbreviation, IC, before the registration number signifies thatregistration was performed based on a Declaration of Conformity indicatingthat Industry Canada technical specifications were met. It does not imply thatIndustry Canada approved the equipment.ThinkPad Regulatory Notice 11
Before installing this equipment, users should ensure that it is permissible tobe connected to the facilities of the local telecommunications company. Theequipment must also be installed using an acceptable method ofcommunication. In some cases, the company’s inside wiring associated with asingle line individual service may be extended by means of a certifiedconnector assembly (telephone extension cord). The customer should be awarethat compliance with the above conditions may not prevent degradation ofservice in some situations.Repairs to certified equipment should be made by an authorized Canadianmaintenance facility designated by the supplier. Any repairs of alterationsmade by the user to this equipment, or equipment malfunctions, may give thetelecommunications company cause to request the user to disconnect theequipment.Users should ensure for their own protection that the electrical groundconnections of the power utility, telephone lines and internal metallic waterpipe system, if present, are connected together. This precaution may beparticularly important in rural areas.Caution: Users should not attempt to make such connections themselves, butshould contact the appropriate electric inspection authority, or electrician, asappropriate.The Ringer Equivalence Number (REN) for the terminal equipmentRD02-D450 or RD02-D330 is 0.1. The REN assigned to each terminalequipment provides an indication of the maximum number of terminalsallowed to be connected to a telephone interface. The termination on aninterface may consist of any combination of devices subject only to therequirement that the sum of the Ringer Equivalence Numbers of all thedevices does not exceed five.Avis: Le présent matériel est conforme aux spécifications techniquesd’Industrie Canada applicables au matériel terminal. Cette conformité estconfirmée par le numéro d’enregistrement. Le sigle IC, placé devant lenuméro d’enregistrement, signifie que l’enregistrement s’est effectuéconformément à une déclaration de conformité et indique que lesspécifications techniques d’Industrie Canada ont été respectées. Il n’impliquepas qu’Industrie Canada a approuvé le matériel.Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de leraccorder aux installations de l’entreprise locale de télécommunication. Lematériel doit également être installé en suivant une méthode acceptée deraccordement. Dans certains cas, les fils intérieurs de l’entreprise utilisés pourun service individuel à ligne unique peuvent être prolongés au moyen d’undispositif homologué de raccordement (cordon prolongateur téléphonique12
interne). L’abonné ne doit pas oublier qu’il est possible que la conformité auxconditions énoncées ci-dessus n’empechent pas la dégradation du service danscertaines situations. Actuellement, les entreprises de télécommunication nepermettent pas que l’on raccorde leur matériel à des jacks d’abonné, sauf dansles cas précis prévus par les tarifs paticuliers de ces entreprises.Les réparations de matériel homologué doivent être effectuées par un centred’entretien canadien autorisé désigné par le fournisseur. La compagnie detélécommunications peut demander à l’utilisateur de débrancher un appareil àla suite de réparations ou de modifications effectuées par l’utilisateur ou àcause de mauvais fonctionnement.Pour sa propre protection, l’utilisateur doit s’assurer que tous les fils de miseà la terre de la source d’énergie électrique, des lignes téléphoniques et descanalisations d’eau métalliques, s’il y en a, sont raccordés ensemble. Cetteprécaution est particulièrement importante dans les régions rurales.Avertissement: L’utilisateur ne doit pas tenter de faire ces raccordementslui-même; il doit avoir recours à un service d’inspection des installationsélectriques, ou à électricien, selon le cas.L’indice d’équivalence de la sonnerie (IES) du présent matériel RD02-D450 ouRD02-D330 este de 0.1. L’IES assigné à chaque dispositif terminal indique lenombre maximal de terminaux qui peuvent être raccordés à une interfacetéléphonique. La terminaison d’une interface peut consister en unecombinaison quelconque de dispositifs, à la seule condition que la sommed’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas 5.ThinkPad Regulatory Notice 13
TrademarksThe following terms are trademarks of Lenovo in the United States, othercountries, or both:Lenovo®ThinkPad®UltraConnectOther company, product, and service names may be trademarks or servicemarks of others.Part Number: 75Y420314
Digitizer If your computer comes with a digitizer, you can take advantage of the features and benefits of pen input on your computer. Note: Do not use any pen other than the specified one, or any metallic object, because to do so might damage the digitizer pad or cause it to malfunction. Using the digitizer pen The digitizer pen and its accessories are shipped in a separate box within the ThinkPad shipping box. You can use the pen to input data into your applications via the digitizer pad on the palm rest. Note: This pen is not waterproof. Take care not to soak it or dip it in water. You can store the pen in the slot on the right side of the ThinkPad computer. Press it gently into the slot until you hear a click. To remove the pen from its slot, press it gently into the slot (1) to release it; then pull it out (2). Note: The pen contains pressure sensors. Do not push the tip of the pen for an extended period of time. Do not subject the pen to shock or vibration. The digitizer pen consists of a tip (2), a click button (3), and an eraser tip (4). Hold the pen and point the tip at the digitizer pad (1) to begin.
To make a selection (single click), tap the pad once with the pen. To double-click, tap twice without pausing. To do a right-click, tap once and then hold the tip of the pen on the pad; the right-click icon appears. By default, pressing the click button (3) is the same as a right-click. The eraser tip (4) functions like an eraser in applications that support this function. Note: The digitizer pen shipped with the ThinkPad W700 and ThinkPad W700ds computers is for use with that computer only. Do not insert it into the pen slot of a ThinkPad tablet computer. Note: The digitizer pen shipped with a ThinkPad tablet computer is for use with that computer only. Do not insert it into the pen slot of the ThinkPad W700 and ThinkPad W700ds Notebook. Replacing the digitizer pen tip The tip of the digitizer pen may wear out. Replacement tips and a tip removal tool are included in the pen box shipped with your computer. Note: Your computer is shipped with five replacement tips for the digitizer pen. Be sure to store the pen tips in a secure place for future use. The pen tips will not be covered under the warranty for the digitizer pen or the computer. To replace a pen tip, do as follows: 1. Grip the pen tip with the tip removal tool, and pull it out. 2. Insert a replacement pen tip fully into the digitizer pen.
Using the touch pad The touch pad consists of a pad (1) and two click buttons below the TrackPoint® buttons at the bottom of the keyboard. To move the pointer (4) on the screen, slide your fingertip over the pad in the direction in which you want the pointer to move. The functions of the left (3) and right (2) click buttons correspond to those of the left and right mouse buttons on a conventional mouse. Customizing the touch pad To customize the touch pad, do as follows: 1. Press Fn+F8. A panel for UltraNav® Device Settings pops up. 2. Click Manage Settings to open the Mouse properties window. 3. Click the UltraNav tab and proceed to customizing the touch pad. For details, refer to the Help in the Utility.

Navigation menu