Wlink Electronic Technology BT3GMD-A30P Bluetooth 3.0 Audio Module User Manual
Taiwan Wlink Electronic Technology Co., Ltd Bluetooth 3.0 Audio Module
User Manual
Product Specification WLINK TECHNOLOGY LTD. Features: Bluetooth 3.0 Audio Module, Class 2 The BT3GMD-A30P offers the following features: ● A2DP1.2 using SBC decoder for streaming audio over Bluetooth and AVRCP 1.4 for remote control functionality Version: V1.0 Mar 2012 ● Configurable seven-band speaker equalization as well as ten presets allowing multiple music listening styles ● High quality 96 dB SNR DACs with 44.1 and 48 kHz sample rates for high-fidelity playback ● Single-chip Bluetooth 3.0 transceiver supporting Bluetooth 2.1 + Enhanced Data Rate (EDR) and Bluetooth 2.0, 1.2, and 1.1 backward compatibility ● Best-in-class Bluetooth radio with up to 8 dBm transmit power and -91dBm receive sensitivity ● Support for side tone and digital microphones ● Supports microphone and speaker HW equalization ● automatic volume control (AVC) ● Switching regulator, battery charger, and power management unit ● Supports fast charging, power dissipation monitoring, and optional charger voltage regulation ● Dual high quality 8 kHz and 16 kHz audio MIC inputs ● Multilanguage voice prompt ● Voice command recognition Product Description: The BT3GMD-A30P is a Bluetooth 3.0 Module solution integrating common components required for cost and performance-optimized stereo headset designs. The BT3GMD-A30P also delivers differentiating features including enhanced audio quality, reduced charging times, A2DP, and multipoint connections through the integration of various noise suppression technologies, noise and echo reduction headset, for high-end __________________________________________________________________________________ Page 1 of 12 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 WLINK TECHNOLOGY LTD. Product Specification and cost and performance-optimized stereo headsets. The BT3GMD-A30P supports Bluetooth SIG-compliant wideband speech implementation to greatly enhance the audio quality with both PCs and cell phones. The BT3GMD-A30P supports the Bluetooth 3.0 standard, adding enhanced power control, simple and secure pairing, and enhanced inquiry response as value-added features for Bluetooth headsets. All major functional blocks required for a Bluetooth stereo headset, including switcher, charger, and stereo audio codec are The module includes EEPROM, crystal, and PCB antenna. Applications: ● High-End Stereo Wireless Headsets ● High-END Mono Headsets ● Hands-Free Car Kits ● Wireless Speakers Functional Block Diagram: Figure 1: BT30MD-A30P Block Diagram __________________________________________________________________________________ Page 2 of 12 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 WLINK TECHNOLOGY LTD. Product Specification Physical Description: The BT30MD-A30P is a 13.5mm×22mm FR4 PCB with 30 pads located around the perimeter. Table 1 shows the pinout diagram of the module. Table 1 Pin Location Figure 2: Module PCB Top View __________________________________________________________________________________ Page 3 of 12 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 WLINK TECHNOLOGY LTD. Product Specification Table 2 Pin Function Descriptions __________________________________________________________________________________ Page 4 of 12 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 WLINK TECHNOLOGY LTD. Product Specification Supporting Documentions: Reference Schematic: The most recent schematic , bill of materil ,and layout file are available from the WLINK TECHNOLOGY LTD.. Contact your WLINK representative for details. Layout Considerations: The BT30MD-A30P module is placed at the location where the antenna is away from the power supply(i.e.,BT1 Battery contacts)and any digital signal traces.. The antenna keep-out area which is 5mm around the parameter of the module region is shown in the red dotted box. PCB material and signal traces should not be placed within the antenna keep-out area to assure optimum antenna performance. Figure 3: Design reference Electrical Characteristics: Table 3: Maximum Electrical Rating __________________________________________________________________________________ Page 5 of 12 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 WLINK TECHNOLOGY LTD. Product Specification Table 4:Power Supply Current (with a Nominal 3.7V Battery Voltage) Table 5: Audio DAC Path Performance Specifications, 8 kHz and 16 kHz Sample Rate __________________________________________________________________________________ Page 6 of 12 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 WLINK TECHNOLOGY LTD. Product Specification RF Specification: Table 6 : Receiver RF Specifications __________________________________________________________________________________ Page 7 of 12 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 WLINK TECHNOLOGY LTD. Product Specification Table7: Transmitter RF Specifications __________________________________________________________________________________ Page 8 of 12 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 WLINK TECHNOLOGY LTD. Product Specification Application Examples: ·Stereo Headphones ·Wireless stereo speakers ·Soundbars ·Mono Headsets ·Handsets ·and more… Figure 4 : Application __________________________________________________________________________________ Page 9 of 12 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 Product Specification WLINK TECHNOLOGY LTD. Mechanical Specification: Weight: Figure 5: BT3GMD-A30P Module PCB Layout Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. __________________________________________________________________________________ Page 10 of 12 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 WLINK TECHNOLOGY LTD. Product Specification - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Declaration the Restriction of this Limited Module Approval: According to FCC Part 15 Subpart C Section 15.212, the radio elements of the modular transmitter must have their own shielding. However, due to there is no shielding for this Bluetooth Module, this module is granted as a Limited Modular Approval. When this Bluetooth Module is installed into the End Prouduct by a specific manufacturer, this specific manufacturer should re-evaluate that End Product for the Spurious Emission Test to ensure the full compliance of 15.247 requirements. End Product Labelling The final end product must be labelled in a visible area with the following" Contains FCC ID: OZJBT3GMD-A30P ". The FCC part 15.19 statement below has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this __________________________________________________________________________________ Page 11 of 12 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 WLINK TECHNOLOGY LTD. Product Specification device must accept any interference received, including interference that may cause undesired operation. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. __________________________________________________________________________________ Page 12 of 12 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Create Date : 2012:09:17 11:04:49Z Modify Date : 2012:09:20 15:43:36+08:00 Metadata Date : 2012:09:20 15:43:36+08:00 Format : application/pdf Creator : Acampo GmbH Producer : PDF Page Organizer 2.93 - Foxit Software Document ID : uuid:04aba626-38ad-42fe-bcd6-d3c61ab0c4da Instance ID : uuid:1622e274-4227-4111-a4ea-50b233bad30b Page Count : 12 Author : Acampo GmbHEXIF Metadata provided by EXIF.tools