Wolf Ct15G S Users Manual

CT15GS to the manual 249fbf3f-974c-cc24-e1a3-a638555eed34

: Wolf Wolf-Ct15G-S-Users-Manual-477500 wolf-ct15g-s-users-manual-477500 wolf pdf

Open the PDF directly: View PDF .
Page Count: 6

Download
Open PDF In Browser	View PDF

Planning Information

Integrated Gas Cooktop
MODEL CT15G/S
Medium 12,000 Btu/hr
(3.5 kW) burner

Two-tiered
control knobs

Low-profile
continuous grates
Model CT15G/S

Illuminated
control panel

Location of
rating plate

Seamless drawn pan

The Wolf Model CT15G/S 15" (381)
integrated gas cooktop is available in
natural or LP gas with classic stainless
steel finish. The model number followed
by (-LP) denotes an LP gas model.

This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.

Small 9,200 Btu/hr
(2.7 kW) burner

New features make cooking a greater pleasure than
ever. For instance, at higher settings the patented Dual
Stacked Burner design uses its upper-level burner for
maximum heat transfer. Merely turn down the illuminated knob and the lower-tier burners delivers finetuning control and True Simmer. This patented feature
allows you to have the slightest of flame and enjoy a
simmer with no boiling or scorching.
The integrated gas cooktop is available in the classic
stainless steel finish.
The sealed burners and deep recess of the seamless
drawn pan area make clean up of any of those previously unsightly spills a snap.
With Wolf’s integrated modules, you have the ultimate
in customization. You can create your own design by
mixing and matching the various components within
this system.

Dimensions in parentheses are in
millimeters unless otherwise specified.
9/07

1

Planning Information

Integrated Gas Cooktop
MODEL CT15G/S
F E AT U R E S

Integrated design allows for installation of
multiple cooktops or modules
Available in natural and LP gas
Stainless steel top construction with classic
stainless steel finish
Two dual-stacked, sealed burners with
automatic reignition on all settings
One medium 12,000 Btu/hr (3.5 kW) sealed
burner with 800 Btu/hr (.2 kW) delivered at
simmer
One small 9,200 Btu/hr (2.7 kW) sealed
burner with 300 Btu/hr (.1 kW) delivered at
simmer

Individual spark ignition system
True Simmer setting on both burners
Illuminated control panel with two-tiered
control knobs
Low-profile, cast iron continuous burner
grates with matte porcelain finish
Seamless drawn burner pan
CSA certified for US and Canada
Two and five year residential warranty—
exclusions apply; warranty information can
be found on our website, wolfappliance.com

OVERALL DIMENSIONS

21"
(533)
OVERALL
DEPTH

15" (381)
OVERALL WIDTH

4" (102)

Unit dimensions may vary by ± 1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.

2

Planning Information

Integrated Gas Cooktop
MODEL CT15G/S
S P E C I F I C AT I O N S

Overall Cooktop Width

15" (381)

Overall Cooktop Height

4" (102)

Overall Cooktop Depth

21" (533)

Model CT15G/S

MODEL OPTIONS

Classic Stainless Steel

CT15G/S

Natural gas model listed, for LP gas add
(-LP) to the model number.

Burner Rating
One 12,000 Btu/hr (3.5 kW) burner with 800 Btu/hr
(.2 kW) delivered at simmer
One 9,200 Btu/hr (2.7 kW) burner with 300 Btu/hr
(.1 kW) delivered at simmer
22 3/4" (578)

Minimum Cabinet Depth
Minimum Height Clearance

4" (102)

Cooktop Cut-Out Width

14" (356)

Cooktop Cut-Out Depth

19 1/4" (489)

V E N T I L AT I O N O P T I O N S

30" (762) Cooktop hood or Pro
wall or wall chimney hood or liner

Electrical Supply Requirements

30" (762) or 45" (1143) downdraft
ventilation system

Power Cord

36" (914) Pro island hood
Gas Rating
For additional information, refer to the
Cooktop or Pro Ventilation sections of our
website, wolfappliance.com.

ACCESSORIES

Shipping Weight
Special Note

120 V AC, 60 Hz
15 amp circuit
6' (1.8 m) power cord
with grounded plug
21,200 Btu/hr (6.2 kW)
30 lbs (14 kg)

Cooktop can be installed in combination
with other cooktops or modules

Specifications are subject to change without notice.

Filler strip
Bracket supports for installation
of two integrated modules with
downdraft (Model DD30 only)
High altitude conversion kit
Accessories are available through your
Wolf dealer. To obtain local dealer
information, visit the Showroom Locator
section of our website, wolfappliance.com.

Unit dimensions may vary by ± 1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.

3

Planning Information

Integrated Gas Cooktop
MODEL CT15G/S
I N S TA L L AT I O N S P E C I F I C AT I O N S

33" (838) RECOMMENDED

13" max
(330)

CABINET WIDTH

18"
2 1/2"**

19 1/4" (489)
(64) COOKTOP CUT-OUT
DEPTH

(457)

2 1/2" min
(64)

7"* min (178)
14" (356)
CUT-OUT TO
COMBUSTIBLE COOKTOP CUT-OUT
WIDTH
MATERIALS
(BOTH SIDES)

30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP

4" (102)
G

E

36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT

15"
(381)

15"
(381)

LOCATION OF GAS
SUPPLY MAY ALSO
EXTEND 5" ON FLOOR
FROM BACK WALL

LOCATION OF GAS SUPPLY
MAY ALSO EXTEND 5" ON
FLOOR FROM BACK WALL

5"

15"

(127)

(381)

NOTE: Application shown allows for installation of two 15" (381) modules side-by-side with 33" (838) recommended cabinet width. 18" (457)
recommended cabinet width for installation of single 15" (381) cooktop or module. *Minimum clearance from both side edges of cooktop cut-out
to combustible materials up to 18" (457) above countertop. **Minimum clearance from rear edge of cooktop cut-out to combustible materials up
to 18" (457) above countertop.
14" (356)
COOKTOP CUT-OUT
WIDTH

19 1/4" (489)
2 1/2" min
(64)

COOKTOP
CUT-OUT DEPTH

FRONT OF COUNTERTOP

DIMENSIONS

Recommended Cabinet Width

33" (838)

Minimum Cabinet Depth

22 3/4" (578)

Cooktop Cut-Out Width

14" (356)

Cooktop Cut-Out Depth

19 1/4" (489)

Location of Electrical and Gas Supply

Within shaded area

See Installation Instructions shipped with unit for detailed specifications.

Dimensions in parentheses are in
millimeters unless otherwise specified.

4

Planning Information

Integrated Gas Cooktop
MODEL CT15G/S
I N S TA L L AT I O N N OT E S

Refer to the illustrations and specifications
for overall dimensions, cut-out dimensions and
installation specifics.
When multiple integrated cooktop modules
are installed side by side, refer to the countertop cut-out dimensions on page 6.
A Wolf downdraft system, Cooktop or
Pro ventilation hood is recommended. When
installing a ventilation hood, refer to the specific
requirements of the hood for the minimum
dimension to countertop. Also refer to the
ventilation recommendation charts in the
cooktop or Pro ventilation sections of our
website, wolfappliance.com.
The Wolf integrated gas cooktop requires a
separate 120 V AC, 60 Hz power supply. The
service should have its own 15 amp circuit
breaker and a grounded 3-prong receptacle
should be located within the reach of the
6' (1.8 m) power cord. Locate electrical within
the shaded area shown in the illustration on
page 4.
IMPORTANT NOTE: A ground fault circuit
interrupter (GFCI) is not recommended and may
cause interruption of operation.
For the integrated gas cooktop, the gas
service may be supplied through the floor if the
cooktop is not installed above an oven. Refer
to the illustration on page 4 for placement of
electrical and gas supply.

Dimensions in parentheses are in
millimeters unless otherwise specified.

Wolf gas cooktops are designed to operate
on natural gas at 5" (12.5 mb) WC (water
column) pressure or LP gas at 10" (25 mb) WC
pressure. The minimum line pressure for natural
gas is 7" (17.5 mb) WC and 11" (27.4 mb) WC
for LP gas. The maximum gas supply pressure
to the regulator should never exceed 14"
(34.9 mb) WC; .5 psi (3.5 kPa). It is supplied
with a 1/2" NPT male gas connection at the
right rear bottom corner of the cooktop. The
male connector exits the unit straight down and
you are supplied with a regulator with two
female connectors.
You must follow all National Electrical Code
and gas regulations. In addition, be aware of
local codes and ordinances when installing your
services.
Wolf gas cooktops using natural gas
function up to an altitude of 8,000' (2438 m)
without any adjustment. Natural gas installations from 8,000' (2438 m) to 10,000' (3048 m)
need the high altitude conversion kit. LP gas
installations will operate up to 10,000' (3048 m)
without adjustment.
Refer to the installation instructions
shipped with each Wolf product for detailed
specifications.

This cooktop is intended for indoor use only.

5

Planning Information

Integrated Gas Cooktop
MODEL CT15G/S
M U LT I P L E C O O K T O P I N S TA L L AT I O N

With Wolf's integrated modules, you have the
ultimate in customization. You can create your
own design by mixing and matching the various
components within this system. And when you
couple these modules with other cooktops
within the Wolf inventory you and your client will
truly understand freedom of choice.
Some Wolf integrated modules can be installed
together or with a 30" (762) or 36" (914)
cooktop. When multiple units are installed side
by side, the cut-out dimensions that are shown
in the illustration are derived by adding 1 1/4" (32)
additional space for each additional unit, to give
you your total cut-out width. Refer to the illustration below for countertop cut-out dimensions
for installation of multiple cooktop units.

IMPORTANT NOTE: When multiple cooktops
and/or modules are installed side by side, each
unit must have its own separate recommended
electrical circuit. When multiple gas cooktops
and/or modules are installed next to one
another, they can receive their gas supply from a
common line. However, each unit must have its
own regulator installed between the mainline
and the cooktop or module.
IMPORTANT NOTE: Review specifications for
each specific integrated module for installation
requirements and limitations. Refer to the
integrated modules section of our website,
wolfappliance.com.

When two or more cooktops or modules are
installed together, an accessory filler strip is
recommended. Refer to Accessories on page 3.

593/4" (1518) FOUR MODULES WIDTH OR
591/2" (1511) 30" COOKTOP AND TWO MODULES OR
501/4" (1276) 36" COOKTOP AND ONE MODULE
441/2" (1130) THREE MODULES WIDTH OR
441/4" (1124) 30" COOKTOP AND ONE MODULE
291/4" (743)
TWO MODULES WIDTH

21/2"min
(64)

14"

191/4"

(356)
CUT-OUT
WIDTH

(489)
CUT-OUT
DEPTH

FRONT OF COUNTERTOP

Countertop cut-out dimensions for installation of multiple cooktop units.

Dimensions in parentheses are in
millimeters unless otherwise specified.

6



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 6
X Press Private                 : %%DocumentProcessColors: Black.%%DocumentCustomColors: (Wolf Red).%%CMYKCustomColor: .275 .922 .937 .149 (Wolf Red).%%EndComments
Producer                        : QuarkXPress(tm) 6.52
Create Date                     : 2007:08:27 15:10:18
Creator                         : QuarkXPress(tm) 6.52

EXIF Metadata provided by EXIF.tools