Wolf Down Ventilation Users Manual UCI

Down Ventilation to the manual 15bd596f-b0e5-5f64-ad46-03fc672b195e

2015-02-03

: Wolf Wolf-Down-Ventilation-Users-Manual-477821 wolf-down-ventilation-users-manual-477821 wolf pdf

Open the PDF directly: View PDF .
Page Count: 12

USE &CARE INFORMATION

DOWNDRAFT VENTILATION

CONTENTS

Wolf Downdraft Ventilation Systems 3

Safety Instructions and Precautions 4

Wolf Downdraft Use & Care 6

Service Information 10

Wolf Warranty 11

As you read this Use & Care Information,

take particular note of the CAUTION and

WARNING symbols when they appear.

This information is important for safe and

efficient use of the Wolf equipment.

In addition, this Use & CareInformation may

signal an IMPORTANT NOTE which highlights

information that is especially important.

signals a situation where minor injury or

product damage may occur if you do not

follow instructions.

states a hazard that may cause serious

injury or death if precautions are not

followed.

WOLF®is a registered trademark of Wolf Appliance Company, Inc.

THANK YOU

Your purchase of a Wolf downdraft ventilation

system attests to the importance you place

upon the quality and performance of your

cooking equipment. We understand this impor-

tance and have designed and built your down-

draft with quality materials and workmanship

to give you years of dependable service.

Before you begin using your downdraft,

please take some time to read this Use & Care

Information. It will be to your benefit to

familiarize yourself with the safety practices,

features, operation and care recommendations

for your downdraft ventilation system.

We appreciate your choice of a Wolf Appliance

product and welcome any suggestions or

comments you may have. To share your

opinions with us, please call 800-332-9513.

Your Wolf Appliance product is protected by

awarranty that is one of the finest in the

industry. Take a moment to read the warranty

statement on page 11 and refer to it should

service become necessary.

WOLF DOWNDRAFT VENTILATION SYSTEMS

IMPORTANT NOTE:

Wolf downdraft ventila-

tion systems are recommended for use with

Wolf framed electric, gas, induction and

multi-function cooktops. They cannot be used

with unframed electric cooktops and are not

recommended for use with the electric grill,

steamer and fryer modules. A Pro ventilation

hood is recommended for use with Wolf dual

fuel ranges, gas ranges, sealed burner range-

tops and gas rangetops.

IMPORTANT NOTE:

Adowndraft can be

used with sealed burner rangetop Models

SRT304 and SRT366. An accessory trim kit

(SRT/DDTRIM) is necessary for this installation.

Contact your Wolf dealer for details.

Any violation of this application may void

your warranty for one or both products.

CONTACT

INFORMATION

Wolf Customer

Service:

800-332-9513

Website:

wolfappliance.com

IMPORTANT NOTE: Read all safety

instructions before using this

appliance.

Read this Use & Care Information

carefully before using your new

downdraft ventilation system to

reduce the risk of fire, electric shock

or injury to persons.

Installation work and electrical

wiring must be done by qualified

person(s) in accordance with all

applicable codes and standards,

including fire-rated construction

codes and standards.

Use this downdraft only in the

manner intended by Wolf Appliance

Company. If you have questions,

Beforeservicing or cleaning, switch

power off at the service panel and

lock the service disconnecting

means to prevent power from being

switched on accidentally. When the

service disconnecting means can not

be locked, securely fasten a promi-

nent warning device, such as a tag,

to the service panel.

Sufficient air is needed for proper

combustion and exhausting of gases

through the flue (chimney) of fuel

burning equipment to prevent back

drafting. Follow the heating equip-

ment manufacturer’s guideline and

safety standards such as those

published by the National Fire

Protection Association (NFPA), the

American Society for Heating,

Refrigeration and Air Conditioning

Engineers (ASHRAE) and the local

code authorities.

SAFETY INSTRUCTIONS AND PRECAUTIONS

This appliance must be grounded.

For general ventilating use only. Do

not use to exhaust hazardous or

explosive materials and vapors.

Ducted fans must always be vented

to the outdoors.

To reduce the risk of fire, use only

steel ductwork.

Do not install this downdraft with

the activating switch directly behind

aburner or element. The minimum

distance between the switch and

edge of the burner should be 4"

(102 mm).

Do not wear loose-fitting or hanging

clothing when operating this appli-

ance. It may be ignited by burners or

elements on the cooktop.

Children should not be left alone or

unattended in the area where this

appliance is in use.

To reduce the risk of fireand

properly exhaust air, be certain to

duct air outside. Do not vent

exhaust air into spaces within

walls or ceilings or into attics,

crawl spaces or garages.

Do not repair or replace any part of

this appliance unless specifically

recommended in this book. All other

service should be performed by a

qualified technician.

To avoid motor bearing damage and

noisy and/or unbalanced impellers,

keep drywall spray, construction

dust, etc. off power unit.

When cutting or drilling into wall or

ceiling, do not damage electrical

wiring or other hidden utilities.

Please read the specification label

on the downdraft for further infor-

mation and requirements.

TO REDUCE THE RISK OF INJURY TO

PERSONS IN THE EVENT OF A

COOKTOP GREASE FIRE, OBSERVE

THE FOLLOWING:

Smother flames with close-fitting

lid,cookie sheet, or metal tray, then

turn off the burner. Be careful to

prevent burns. If the flames do not

go out immediately, evacuate and

call the fire department.

Never pick up a flaming pan –you

may be burned.

Do not use water,including wet

dishcloths or towels – a violent

steam explosion will result.

USE AN EXTINGUISHER ONLYIF:

You know you have a Class ABC

extinguisher and you already know

how to operate it.

The fire is small and contained in

the area where it started.

The firedepartment is being called.

You can fight the fire with your back

to an exit (NFPA Fire Safety Tips).

TO REDUCE THE RISK OF RANGE

TOP GREASE FIRE:

a) Never leave surface units

unattended at high settings.

Boilovers cause smoking and

greasy spillovers that may

ignite. Heat oils slowly on low

or medium settings.

b) Always turnhood ON when

cooking at high heat or when

flambeing foods (i.e. Crepes

Suzette, Cherries Jubilee,

Peppercorn Beef Flambe').

c) Clean ventilating fans

frequently. Grease should not

be allowed to accumulate on

fan or filter.

d) Use proper pan size. Always use

cookware appropriate for the

size of the surface element.

DOWNDRAFT FEATURES

Classic, platinum and carbon stainless steel

finishes available on control module and

top cover for Models DD30 and DD36

Model DD45 comes standard with a classic

stainless steel control module and top

cover—not available in platinum or carbon

stainless steel finish

Internal and remote blower options

Remote-mounted control module

Three-speed blower control

Filter clean timer lets you know when the

filter needs cleaning

Delay-offfeature automatically turns unit

off after five minutes, chimney remains up

Stainless steel filter cover with dishwasher

safe aluminum mesh filter

LED indicators

9" (229) chimney elevation

Downdraft control kit, available as a sales

accessory for Models DD30 and DD36

(included with Model DD45)—includes

control module, top cover, mounting

brackets, RJ45 connector and mounting

hardware

UL listed to US and Canadian safety

standards

Two and five year residential warranty—

exclusions apply, see warranty on page 11

WOLF DOWNDRAFT FEATURES

WOLF

WARRANTY

Wolf products are

covered by a two

and five year

residential

warranty (exclu-

sions apply). See

warranty details

at the end of this

guide.

DOWNDRAFT

Model DD36 shown

Model DD30

Model DD36

9" (229) chimney

elevation

Top cover

Remote-mounted

control module

Location of rating

plate

Three-speed

blower control

Aluminum mesh

filters

Stainless steel

filter covers

Model DD45

WOLF DOWNDRAFT USE & CARE

DOWNDRAFT ACCESSORIES

Optional downdraft accessories are available

through your Wolf dealer. To obtain local

dealer information, visit the Locator section of

our website, wolfappliance.com.

BLOWER OPTIONS

Wolf downdraft Models DD30I, DD36I and

DD45I include a 500 CFM internal blower.

Models DD30R, DD36R and DD45R are shipped

without a blower assembly and can be used

with the remote blowers listed below. Remote

blowers are available as sales accessories.

Models DD30R, DD36R and DD45R

900 CFM Remote Blower

801641

1200 CFM Remote Blower

801642

1500 CFM Remote Blower

804701

IMPORTANT NOTE:

Blower options vary with

the cooking surface. For recommendations,

refer to the Wolf Design Guide found on the

Wolf website, wolfappliance.com.

CONTROL KITS

IMPORTANT NOTE:

The downdraft must be

used with a Wolf-approved control module and

top cover.

The remote-mounted control module and top

cover are available in the classic, platinum and

carbon stainless steel finish for Models DD30

and DD36, and classic stainless steel only for

Model DD45.

The control kit, available as a sales accessory

for Models DD30 and DD36 and included with

Model DD45, includes the control module, top

cover, mounting brackets, RJ45 connector and

mounting hardware.

Models DD30I and DD30R

Classic Stainless

DD30CONTROL/S

Platinum Stainless

DD30CONTROL/P

Carbon Stainless

DD30CONTROL/B

Models DD36I and DD36R

Classic Stainless

DD36CONTROL/S

Platinum Stainless

DD36CONTROL/P

Carbon Stainless

DD36CONTROL/B

In delay-off mode, both the

DELAY

LED and

the corresponding blower speed LED will

beilluminated.

Ifthe blower is on high speed and the

DELAY

button is pressed, the blower will

stay on high speed for five minutes. It will

then switch to low speed for an additional

five minutes before turning off. The

chimney will stay up.

If the blower is on medium speed and the

DELAY

button is pressed, the blower will

stay on medium speed for five minutes.

It will then switch to low speed for an

additional five minutes before turning off.

The chimney will stay up.

If the blower is on low speed and the

DELAY

button is pressed, the blower will

stay on low speed for five minutes before

turning off. The chimney will stay up.

If the

DELAY

button is pressed when the

blower is offor when the chimney is down,

no operation will take place.

If the

DELAY

button is pressed when the

unit is already in delay-offmode the delay-

off feature will be cancelled.

WOLF DOWNDRAFT USE & CARE

DOWNDRAFT CONTROLS

To activate your new Wolf downdraft, press

the

UP/DOWN

button on the control

module.

Once the

UP/DOWN

button is pressed, the

downdraft blower will turn on at the last

speed used, or on medium for first time

use.

To adjust the speed of the blower, press

the

HIGH

MEDIUM

LOW

button. The

corresponding LED will illuminate to

indicate the blower speed.

The LED next to the

FILTER

button on the

control module will illuminate when it is

time to clean the filters. This indicator light

comes on after approximately 30 hours of

operation. Refer to Filter Care on page 9.

To reset the FILTER clean LED indicator,

press the

FILTER

button.

DELAY-OFF FEATURE

The delay-off feature will allow the down-

draft blower to continue operating at the

selected speed for approximately five

minutes after the

DELAY

button has been

pressed. This featureallows you to leave

the cooking area, while the downdraft

system is still in operation, it will then shut

offand the chimney will stay up.

Downdraft control module

Three-speed

blower controls

Delay-off featureFilter clean LED indicator

Activation button

Protective Polish:

Apply to the surface to

maintain luster and protect from some food

stains. Use a soft, non-abrasive stainless steel

cleaner like Signature Polish (see side note)

and apply with a soft lint-free cloth.

FILTER CARE

The aluminum mesh filters should be cleaned

approximately every month, depending on

use. The FILTER clean LED on your control

module will illuminate when it is time to clean

the filters. This indicator light comes on after

approximately 30 hours of operation. You may

need to clean the filters more often if your

cooking style generates large amounts of

grease, like frying foods or wok cooking.

The filters and filter covers are dishwasher

safe and aredesigned to fit most dishwashers.

To remove the filters, push down on the filter

frame while pulling the filter out away from

the downdraft. Refer to the illustration below.

Place the aluminum mesh filter and stainless

steel cover into the dishwasher at approxi-

mately 140˚F (60˚C), or hand wash, and use a

biodegradable detergent. When filters are dry,

reinstall using the reverse procedure.

IMPORTANT NOTE:

DO NOT operate the

downdraft without filters. This may cause

damage to the blower or other internal

components of the downdraft system.

WOLF DOWNDRAFT USE & CARE

GENERAL CARE

Most surfaces of your downdraft ventilation

system are stainless steel or aluminum.

Although these surfaces are resistant to most

stains, they are not totally impervious to

damage. Salt and some cooking liquids may

pit and stain the surface. Always remove these

spills immediately.

IMPORTANT NOTE:

Be careful not to soak the

control module. Although they are sealed,

excessive moisture may cause damage to the

controls.

CLEANING

Using a clean cloth or sponge, wipe with warm

water and mild detergent. Rinse and dry

immediately.Apply protective polish, always

in the same direction as the grain.

IMPORTANT NOTE:

Do not use steel wool

pads or abrasive cleaners; they will perma-

nently scratch the surface.

IMPORTANT NOTE:

Painted surfaces should

be cleaned with warm water and mild deter-

gent only.

Spray Degreasers:

Removes fingerprints and

greasy spatters. Spray on a cloth and wipe the

surface. Buff dry immediately to avoid streaks.

Hard Water Stains:

Use white vinegar and

water.

SIGNATURE

POLISH

Signature Polish

is available from

Signature Limited

Laboratory,

P. O. Box 13436,

Dayton, Ohio

45413-0436, or

call 877-376-5474

(toll free).

Downdraft filter removal

SERVICE INFORMATION

When requesting information, literature,

replacement parts or service, always refer to

the model and serial number of your down-

draft. This information is found on the product

rating plate, located above the airbox on the

front side of the unit. Refer to the illustration

on page 6. Record the rating plate information

below for future reference.

Model Number

Serial Number

Installation Date

Wolf Authorized Service Center and Phone

Wolf Dealer and Phone

BEFORE CALLING FOR SERVICE

Beforecalling your Wolf authorized service

center,check the household fuse or circuit

breaker to see if it has been blown or tripped

and that the electrical connection to the

appliance has not been disconnected. A power

outage may also have caused a disruption in

service.

PRODUCT REGISTRATION

we may ensure your satisfaction. You may

Mail in the completed Wolf Product

Registration Card.

wolfappliance.com

Customer Service Department at

800-332-9513

The model and serial numbers of your appli-

ance are printed on the enclosed Wolf Product

Registration Card. If you provide us with your

e-mail address, we will send you exciting new

product updates and recipes as they become

available, along with information on special

events.

SERVICE INFORMATION

CONTACT

INFORMATION

Wolf Customer

Service:

800-332-9513

Website:

wolfappliance.com

The information and images are the copyright

property of Wolf Appliance Company, Inc.,

an affiliate of Sub-Zero Freezer Company, Inc.

Neither this book nor any information or images

contained herein may be copied or used in

whole or in part without the express written

permission of Wolf Appliance Company, Inc.,

an affiliate of Sub-Zero Freezer Company, Inc.

reserved.

WOLF APPLIANCE PRODUCTS

LIMITED WARRANTY

RESIDENTIAL USE ONLY

FULL TWO YEAR WARRANTY*

For two years from the date of original installation, your Wolf Appliance product warranty covers all

parts and labor to repair or replace any part of the product that proves to be defective in materials

or workmanship. All service provided by Wolf Appliance Company under the above warranty must

be performed by a Wolf Appliance authorized service center, unless otherwise specified by Wolf

Appliance Company. Service will be provided in the home during normal business hours.

LIMITED THIRD THROUGH FIFTH YEAR WARRANTY

From the third through fifth year from the date of original installation, Wolf Appliance Company will

repair or replace the following parts that prove to be defective in materials or workmanship. Labor to

remove and replace defective parts is not covered. Wolf Appliance Company recommends that you

use a Wolf Appliance authorized service center to perform such service.

Gas Burners(excluding appearance), Electric Heating Elements, Blower Motors (vent hoods),

Electronic Control Boards, Magnetron Tubes and Induction Generators

LIMITED LIFETIME WARRANTY

For the life of the product, Wolf Appliance Company will repair or replace any BBQ body or BBQ hood

that rusts through due to defective material or workmanship. Labor to remove and replace defective

parts is not covered. Wolf Appliance Company recommends that you use a Wolf Appliance author-

ized service center to perform such service.

TERMS APPLICABLE TO EACH WARRANTY

The warranty applies only to products installed for normal residential use. The warranty applies only

to products installed in any one of the fifty states of the United States, the District of Columbia or

the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect

caused by negligence, accident or improper use, maintenance, installation, service or repair.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT WOLF

APPLIANCE COMPANY

,INC. WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY

WARRANTY ARISING BY OPERATION OF LAW. WOLF APPLIANCE COMPANY, INC. WILL NOT BE

RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE

BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR

STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and

you may also have other legal rights that vary from state to state.

Toreceive parts and/or service and the name of the Wolf Appliance authorized service center

nearest you, contact Wolf Appliance Company, Inc., P. O. Box 44848, Madison, Wisconsin 53744;

check the Locator section of our website, wolfappliance.com, or call 800-332-9513.

*Stainless Steel (classic,platinum and carbon) doors, panels and product frames are covered by a

limited 60 day parts and labor warranty for cosmetic defects.

808257 REV-B 11/2006

WOLF APPLIANCE COMPANY, INC. P. O. BOX 44848 MADISON, WI 53744 800-332-9513 WOLFAPPLIANCE.COM

Wolf Down Ventilation Users Manual UCI

Down Ventilation to the manual 15bd596f-b0e5-5f64-ad46-03fc672b195e

Navigation menu

Versions of this User Manual:

Views

Navigation